Understanding And Configuring Windows Gateway
Mar 20, 2011Understanding and configuring windows gateway
View 1 Replies
ADVERTISEMENT
Cisco WAN :: 2921 Configuring As Gateway System
Apr 26, 2011I'm configuring a 2921 Router. It has 3 GigE ports, of which I'm using 2. I would like the router to also act as a Gateway system between the 2 networks. Can you tell me which configuration commands I need to accomplish this?
View 2 Replies View RelatedUnderstanding Subnetting And Classes?
Dec 8, 2012I am currently trying to understand Subnetting via CCNA. My progress is going well,I understand the class below:
Class A 0-127 Max IP 2^24 = 16777216
Class B 128-191 Max IP 2^16 = 65536
Class C 192-223 Max IP 2^8 = 256
However I have seen an example from an ip calculator website, and noticed this :
Address: 192.168.1.0 11000000.10101000 .00000001.00000000
Netmask: 255.255.0.0 = 16 11111111.11111111 .00000000.00000000
Wildcard: 0.0.255.255 00000000.00000000 .11111111.11111111
=>
Network: 192.168.0.0/16 11000000.10101000 .00000000.00000000 (Class C) - I would have thought this would have been Class B?
Broadcast: 192.168.255.255 11000000.10101000 .11111111.11111111
HostMin: 192.168.0.1 11000000.10101000 .00000000.00000001
HostMax: 192.168.255.254 11000000.10101000 .11111111.11111110
Hosts/Net: 65534 (Private Internet)
Is this an invalid IP/masks as the max hosts is 65534 (which should be class B?). If so shouldnt the IP address range from 128-191- eg 172.16 (I know that CIDR is the amount of 1's. ).What calculates the class is it the netmask or the range of the first octet?
Wifi Connection / Understanding Ip Addresses
Feb 23, 2011When I connect to a public wi-fi connection (e.g. library, hotel, Starbucks), am I sharing the same IP address?
View 19 Replies View RelatedWindows XP Ignoring Default Gateway?
Jun 1, 2012We have a Windows XP machine on our network that is giving us a strange problem. We have it statically configured with an IP and a default gateway address which points to a router on our network. This is the same router that nearly all of our machines point to and none of the other machines have this issue.If we open up CMD and make a ping request from an outside server (public or interal servers on other subnets) we get a 'destination host unreachable' error. We can ping the ip address of the router that is assigned as the default gateway. We can circumvent this ip address by adding a static route ('route add' from CMD) directing all traffic on the network interface to the ip of the router. Once this is done we can ping and get a response from any server both internal and external. We also tried doing a tracert (without have the static route added) to an external site by IP address. The tracert does not even show a hop for the router so it seems as if the request is never making it past the interface on the XP machine. We simply get an error saying it is unable to find the host. Interesting though it does provide us with a domain name for the ip address. So somehow it is able to reslove DNS. (We have a local DNS server on the same subnet)
View 7 Replies View RelatedHow To Configure Default Gateway Windows 7
May 25, 2012I am trying to configure wireless network to my computer but it keeps asking for security key which I am not privy to.
View 1 Replies View RelatedHome Network :: Configuring DNS - Server Is Having Internet But Client Windows 7 Does Not?
Jul 5, 2012I use vmware workstation, and doing small networking project.i use 1 windows server 2008 x64 sp1 as DC, DNS and DHCP with 2 nic(1 nic for local(vmnet2) and 1 for internet(NAT)) and i use 1 windows 7 client machine.in server local nic settings are ip 200.200.200.1 sm 255.255.255.0 gw: empty dns 200.200.200.1
and internet nic settings all set automatic.and in DNS i added forwarder as my company's actual DNS server name.My requirement is client should browse internet by resolving through my dns server.but the problem is my server is having internet but my client windows 7 does not have internet
Configuring A Windows Server 2008 Standard For Small Company?
Apr 3, 2012I would like to know the basic configurations for Win Server 2008 Standard for a small office (60 clients) The company has a Sales, HR, warehouse, and Accounting, and VPN for some sales, what configuration do you recommend me for each area? Right now my server has DHCP, DNS, and AD (do I need to install any other role?), Also what other configuration do I need in order to control my clients and users, and for security? how can I make the clients to save their files in my server? or make a copy of their files from their computers to my server? Any information for security? in my server or Router?
Like the tittle say, I just want to know all the configurations needed in a network for a small company.
Servers :: Configuring Windows 2008 Server To Get Password Prompt
Jan 12, 2011How do configure win2008 server to bring up a password prompt box when access via a workgroup pc on lan.
View 1 Replies View RelatedCisco Firewall :: Configuring Ad Agent On Windows Server R2 2008 SP1 RUS?
Jul 9, 2012I want to configure ad agent on windows server 2008 R2 SP1 with all need patch installed.When i try to connect to DC with adacfg dc list, status is UP. Log ADOBserver's don't show any errors. But when try to do command "adacfg cache list", result - empty. In what may be the problem? Perhaps it is related to the language of the OS?
View 4 Replies View RelatedCisco :: Understanding Route Summarizing And Network?
Jul 19, 2012I have four networks:
172.19.0.0/16
172.20.0.0/16
172.21.0.0/16
172.22.0.0/16
I understand that the summarize route is 172.16.0.0 (255.248.0.0)However I'm trying to understand which other networks fall under this route and how
Cisco :: LMS 4.0.1 / Understanding Change Audit Report?
Jun 27, 2011I need to understand why change audit report reports an unused username Name of the user who performed the change. This is the name entered when the user logged in. It can be the name under which the LMS application is running, or the name using which the change was performed on the device. #The User Name field may not always reflect the user name. The User Name is reflected only when: A config change was performed using LMS. #A config change was performed outside of LMS, but the network has username-based AAA security model, wherein authentication is performed by an AAA server, which could be TACACS/RADIUS or local.
View 2 Replies View RelatedCisco Firewall :: ASA 5505 / Understanding NAT For Both Version 8.2 And 8.3
Mar 1, 2013ASA 5505 Version 8.2 or older nat (inside) 1 10.0.0.0 255.255.255.0nat (INTF4) 1 10.0.4.0 255.255.255.0nat (INTF5) 1 10.0.5.0 255.255.255.0nat (INTF6) 1 10.0.6.0 255.255.255.0nat (INTF7) 1 10.0.7.0 255.255.255.0global (outside) 1 209.165.200.235-209.165.200.254 netmask 255.255.255.224global (outside) 1 interface
I believe this setup does the following. The inside interface and interfaces 4,5,6,and 7 will translate using this line....
global (outside) 1 209.165.200.235-209.165.200.254 netmask 255.255.255.224
and if the addresses run out is will start using the ouside interface IP address to translate, so traffic is not disrupted and is based on the line of configuration.....
global (outside) 1 interface
My question, does it do this because of the order of the configuration..
global (outside) 1 209.165.200.235-209.165.200.254 netmask 255.255.255.224global (outside) 1 interface
or would it do it that way even if it was like this?
global (outside) 1 interfaceglobal (outside) 1 209.165.200.235-209.165.200.254 netmask 255.255.255.224
and if so why?Now let's convert the above configuration to ASA 5505 Version 8.3 or newer.
object network OUTSIDE-NAT-POOLrange 209.165.200.235 209.165.200.254object network INTERNAL-SEGMENTSsubnet 10.0.0.0 255.255.248.0nat (any,outside) dynamic OUTSIDE-NAT-POOL interface
My question is how does it know to use the outside interface as a backup when the OUTSIDE-NAT-POOL is depleted?Also why do I need to define the INTERNAL-SEGMENTS ? Doesn't the "any" in the (any,outside) take care of that?Also wouldn't the "any" in (any,outside) cover interface 3 or DMZ which could be an issue?
8080 Understanding Safety Of Open Ports
Oct 28, 2012I am a D-I-Y type of guy and have managed to setup Apache on my LAN and make it accessible via WAN over port 80 and Tomcat on port 8080.I aim to possibly get a home web server up (will calculate the costs), but I need some questions answered about networking.
My understanding on ports are that they can be a risk if left open (which I have done) if there is no service or application listening on my side on those ports.So I take it that leaving those ports open and removing the services or applications that run on my side for these ports is a major security risk?
I noticed though that Xampp (1.8.1) does not allow requests over WAN unless I set my password for Apache. Does setting this password imply that Xampp is safe to use in a production environment?
Cisco WAN :: 3825 Security Bundle Understanding
Dec 22, 2010I need to understand security bundles. I purchased a Cisco Security Bundle, Advanced Security, 64F/256D. part number CISCO3825-SEC/K9. My expectation from this device was that I will get an IOS based firewall with no need for an additional firewall module. however, the supplier is telling me that I have to buy a firewall module to use the feature. Isn't the bundle supposed to come with all I needed since is a bundle?
Is there any command I can use to verify if this device is really what I paid for? what can can I check for in the sh inv and sh ver commands? I don't see any information from these commands.
Windows 7 Gateway Laptop Won't Connect To Internet
Mar 10, 2013I just reinstalled my windows 7 OS and now my gateway laptop won't connect to the internet. In the network and sharing center there is a x between my computer and internet. I have a westell versalink model 327w and all the other devices in my house can connect except my laptop
View 5 Replies View RelatedAcer Laptop With Windows 7 - Default Gateway Is Not Available
Dec 19, 2011he has the same problem "default gateway is not available" on his Acer laptop with Windows 7, so we were psyched to find this problem posted - and today even (weird?). However, we tried resetting the : netsh winsock reset catalog etc and rebooted but still no internet access.
View 1 Replies View RelatedVPN Gateway Via Cisco - Where To Place Windows Server
Apr 26, 2013I am looking to add remote sites that will authenticate with the Windows Server using VPN via Cisco rv042 routers in a gateway to gateway setup.My main concern is the placement of the server to the router and what would be considered best practice.In my mind, option 1 seems to be what I want - however, this would mean disconnecting the WAN feed to the server (my ip is static and tied into the MAC address of the server). While option 2 doesn't look right to me, it would leave the existing configurations in place which would minimize my downtime (I think)
View 10 Replies View RelatedSecurity :: Configuring KalemSoft Media Streamer With Windows 7 (64bt) Firewall?
Jul 30, 2011I have an hp envy 17, running windows 7 64-bit, and I'm having a problem getting a program, KalemSoft Media Streamer, to work on my laptop, so I can stream my laptop media to my HP TouchPad. I traced the problem down to windows firewall: When windows firewall is disabled, I'm fine, but I want it to work while it's enabled as well. I tried to add it to the list of exceptions but nothing seems to work. I've attached a photo of the error message, i can change the base data and control TCP ports for kalemsoft (currently 5030 and 5031.
View 10 Replies View RelatedLinksys Wireless Router :: E4200v2 - Understanding USB Interface
Jan 13, 2013I need to understand the USB interface.
View 4 Replies View RelatedCisco Firewall :: ASA5505 - Understanding ASA Bundles And Licenses?
Oct 10, 2011Any document which expalins what you need to know when looking at purchasing an ASA5505. Which clearly describes the verious permitations and combinations of these lovely little boxes?
I recently purchased a basic: ASA5505-BUN-K9
I realise now this comes with 10 internal users, 2 ssl and no anyconnect mobility. All these can be purchased as additional licenses.
Its my understanding that to support unlimmited Internal/Inside hosts - I need to purchase the L-ASA5505-SEC-PL (Security Plus License)
1) What is the model I should go for if I want to support unlimmited interneal. Can a 5505 be purchased with with security plus?
Cisco Firewall :: Understanding ASA 5505 Service Contracts?
Feb 18, 2013I currently have 2 5505 SEC BUN as Primary/FO Firewalls and I am considering purchasing the ASA5510-AIP10-K9 for use as a dedicated IPS device. Looking at [URL] I see that for service updates, CON-SU1-AS1A10K9 is available for this product, providing "IPS Signature and Engine Updates" and "OS Updates."It is my understanding that in the ASA5510-AIP10-K9 there are 2 OS:
1. ASA OS
2. AIP SSM-10 OS
My question is: Are both the ASA and AIP SSM-10 able to receive "OS updates" with this service contract?
Cisco Routers :: RV220W - Understanding Logs / Clearing ISR
Aug 19, 2011Looking at the logs RV220W I can read the following lines:
[rv220w]Fri Aug 19 18:28:54 2011(UTC) [rv220w][Kernel][KERNEL] Clearing the ISR a800000003378400
[rv220w]Fri Aug 19 18:30:39 2011(UTC) [rv220w][Kernel][KERNEL] Clearing the ISR a800000003378200
[rv220w]Fri Aug 19 19:23:04 2011(UTC) [rv220w][Kernel][KERNEL] Clearing the ISR a800000003378e00
[ code] ....
What are they?? and what should be done ????.
Broadband :: Windows XP Gateway Desktop Won't Clear ARP Cache
Mar 7, 2011cannot access internet from desktop Gateway WIN XP Mozilla FF Tried ARP cache clear -- went to DOS -- didn't work Tried Admin Tools, comp mgmt, services, routing/remote changed to disabled -- didn't workNow what?
View 1 Replies View RelatedMultiple Gateway Assigned In Windows Xp But Only 1 At A Time Work?
Jan 24, 2012I have 2 networks ,one is 135.7.31.0/24 for intranet to connect remote office gateway is 135.7.31.253. other is airtel broadband to (network 192.168.1.0/24)connect internet GW 192.168.1.1.both are connected in l2 switch(cisco cat exp500) now I assign 2 ip addresses and gateway in win xp PC with TCP/IP advance settings also set the different metrics for 2 networks , now problem is I cannot connect remote office and internet simultaneously, only one networks connect at a time,
View 3 Replies View RelatedWindows Server 2008 Router Not Working As Gateway
May 14, 2012I am trying to learn more about networking and system administration. I am practicing allot on VMs i am running here at home. I am not sure if it is allow to ask beginners questions on this site but i will try my luck anyway.
View 2 Replies View RelatedGateway SX2800-01 Desktop With Windows 7operating System?
Feb 17, 2013I have a gateway SX2800-01 desktop with Windows 7operating system. It is not equipped for wireless networking. My question is, is it possible to retro fit it for wireless networking
View 1 Replies View RelatedDefault Gateway Not Available - Realtek PCIe GBE - Windows 7 MSI Mobo
Mar 3, 2012Currently getting constant disconnects with the following hardware/software
Modem CM100
Router - Tried 4 different routers, issue consistent throughout them all. Original is the Asus RT-n56u.
Realtek PCIe GBE Family Controller
MSI 790XT-G45
Windows 7 Ultimate
After installing several drivers and probably 10-20 tweaks, the issue has stopped for about 50 minutes after consistent at least every 10-20 minutes.I actually just placed an order for a Motorola Surfboard 6121 Although I need the upgrade anyway.
Best Internet Security For Gateway Laptop With Windows Vista?
Mar 28, 2011What is the best internet security for a Gateway laptop with Windows Vista?
View 1 Replies View RelatedWifi Won't Stay Connected Gateway Laptop Windows 8
Dec 5, 2012Have a new Gateway laptop running W8. I have to use Windows diagnostics in Sharing centre to reset the connection although it looks like it is still up.( page cannot be displayed ). Once reset and fixe all is ok until pc goes into sleep mode, then I have to reset again.
View 1 Replies View RelatedInternet Gateway Just Appeared In Network Connections (Windows XP)
Jan 23, 2012When I turned on my laptop today I noticed there was a new icon in my Network Connections section. It's called Internet Gateway. I haven't downloaded anything (weird or otherwise), I'm still able to connect to the internet and nothing seems to be amiss.
View 6 Replies View RelatedCisco Switching/Routing :: Understanding Existing Setup With Two 3750s
Jan 10, 2013We've recently inherited a platform with little handover and also minimal networking experience.We're going 100 miles an hour in learning, but I'm a bit confused with the idea of a L2 switch with no IP assignments to ports, so using VLANs, and a L3 switch with IP assignments. And the combination of both.We have 2 Cisco 3750 switches, along with a whole host of other hardware, so we're starting at this "gateway" to start breaking things down.
View 7 Replies View RelatedCisco Switching/Routing :: Understanding Mls Qos Queue Set Output With 3750
Apr 16, 2012I've been working on breaking down and understanding the default auto qos configuration on a Cisco 3750 in the hopes of putting together a QoS strategy that will fit our environment. I'm having some difficulty understanding how the "mls qos queue-set output" syntax works.
From another post, at [URL], the author offers the following example and explanation;
mls qos queue-set output <1/2> threshold 2 400 400 100 400thresshold 1: 400%
thresshold 2: 400%
thresshold 3: 100% (implicit, not configurable)
reserved: 100%
max: 400%
However, I'm having trouble understanding what is meant. Here, it looks like it's saying, for example;
mls qos queue-set output 1 threshold 2 400 400 100 400
How come there is syntax stating "threshold 2" when in the succeeding part the 400 refers to thresshold 1 and threshold 2 again? The syntax 400 400 is, apparently, already referring to thresshold 1 and 2, no?