Using 3G Dongle With Linksys E4200 Router?
Jan 28, 2012I was wondering if it is possible to use a 3G USB modem with a linksys E4200 router so that I can share the 3G internet wirelessly. I am willing to install unofficial firmware.
View 3 RepliesI was wondering if it is possible to use a 3G USB modem with a linksys E4200 router so that I can share the 3G internet wirelessly. I am willing to install unofficial firmware.
View 3 RepliesI bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
View 2 Replies View RelatedI plugged a wireless dongle to my pc which is too far to plug in to my router. I was wondering how to connect the dongle that is in my computer to my router.
View 1 Replies View RelatedCan I use 3G dongle with wifi router using USB to RJ 45 converter,how to config the same...Also, using same converter; can I convert/share /use my external USB storage device over wifi router...
Router details --Asus RT-N10E Wireless-N150 Router
Dongle details - Huvai EC156
HDD- Segate external usb 1/2 TB (with adapter)
I have a 3 Network USB Dongle which is the only thing that will work for receiving broadband at a remote location.
Also have a Kasda WiFi router It has a USB port on it (whether it is connected to anything inside?)
We want to send wifi around the house with the 3 Network broadband - can we utilize this router or have to get something else
I have a three mobile wireless dongle/modem i want to be able to share it, i have found you can buy wireless routers to do this, but they seem to be £60+ because they also contain a mobile receiver transmitter my question is, is there a wireless router, that accepts a usb dongle for the modem connection rather than containing the mobile equipment? which makes it so much more expensive, as the dongle already contains the mobile part anyway tonyuk123 has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 7 Replies View Relatedi have a 3g usb dongle and my desktop is connected by it. now i have netgear. now i wanted to make a wifi hotspot in my home.i have connected internet via 3g usb dongle, then in network and internet i have changed the change advance setting by making home and public sharing on. then i have connected LAN to desktop to router, then i have changed internet protocol 4 in properties of LAN, by taking the IP address, subnet mask, gateway,DNS server of my service provider and applying same to LAN IPv4. i have doubt that gateway was 0.0.0.0 which was not accepted by LAN.i have left it blank.
View 1 Replies View Relatedi want to connect my dongle and wifi router into as one in my laptop.
View 3 Replies View RelatedI have a laptop in my Office that connects to the internet via a USB dongle. The USB dongle is my only access to the WWW. (as there is no cable in the area) I want to add a wireless LAN to the laptop using wired connection to a wireless ADSL Router in the adjacent building. (there is no ADSL available. Just want the Router for it's HUB capabilities)I have connected the LAN port on the laptop to one of the LAN ports on the ADSL Router via a cable.My plan was to then create a LAN in the adjacent building by adding wireless and wired devices (PCs, ipCameras etc...) to the ADSL Router.When I attempt to setup the ADSL Router, the laptop sees the Wireless Router as conflicting with the wireless attributes of the USB dongle!
View 3 Replies View RelatedRegion : UnitedKingdom
Model : TL-MR3220
Hardware Version : Not Clear
im currently on three netowork usb dongle e3231 and wanting to setup a WiFi network using this dongle would the mr 3220 be a suitable router for my three dongle? also on the tp link site it says the router is battery operated is this the case as im sure it loooks like theres an adaptor plug on the back.
I'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 USB dongle directly into my computer it works perfectly and I got the router to work using a Ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port
View 3 Replies View RelatedI have Netgear router and can't connect to Sony TVI thought earlier comments would solve my problems with my Sony KDL32EX713 but No.I didn't do anything at the router admin side as I couldn't see what could be changed (I'm on Vista). Its IP is 192.168.0.1I looked at adding a wireless device but it lost me.On the TV I tried the manual set up on that Bordersman suggested with the above in the default and DNS lines. leaving the sub net unchanged at 255.255.0.0 and the IP as 192.168.1.15.I said No to Proxy sever (didn't understand the comment about DHCP. It searched and came back with wireless device ok but local and internet connection failed
View 8 Replies View RelatedI have idea netsetter(huawei dongle e1732) and i had unlocked it and now i am using tata docomo sim card on it.now i want to use this dongle in wifi router 3g usb modems.but i am not sure that the dongle can work on router modems or not?i wanna make hotspot at home using dongle in router modem.
View 1 Replies View RelatedRegion : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : aircel,idea
I bought this router just today, but it cant recognize my huawei e303c 3g modem.i've upgraded the firmware. This router supports the dongle or not?
I bought the Telkom wi-fi router with A 3G dongle. If I plug the 3G dongle directly into a laptop it picks up immediately but when I plug it into the router it doesn't pick it up at all.
View 2 Replies View RelatedI would like to connect my USB WIFI dongle directly to my wired router, this would enable me to have wifi access without having my PC switched on all the time, is this possible and if so what kind of adapter do I need? I think I need USB A Female to Ethernet RJ45 Male Router Adapter.
View 5 Replies View RelatedRegion : India
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : MTS
i am using tp-link router tl-mr3020.. having problem with internet access..it shows my isp (mts) network and got connected also.. it also shows me send and receive data.. but there is no internet access through web browsers .i have tried multiple web browsers (IE / Chrome / Mozilla Firefox)..but the problem remains same.. my ISP network is MTS .. Huwai Device EC-122 with CDMA 2G network.
I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers. I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.
View 2 Replies View RelatedUpgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.
View 2 Replies View RelatedIs the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
View 1 Replies View Relatedhad problem with isp after they fixed problem router shortcut disappeared
View 1 Replies View RelatedI am trying to setup my E4200 to my new Cable Modem. I followed all of the procedures. I get Internet access when plugged directly to modem. I cloned the MAC Address and the Stus of the Router displays my current IP's (so I should have Internet). However, when I plug my computer into the Router I get no internet access.
View 3 Replies View RelatedI have that red gigabit router with the 150/65 service. It connects via ethernet for internet and has a coax to transmit the guide data etc.So my idea was to just leave the Verizon router connected and on (with wi-fi off) so it could do the TV stuff and just plug my router into the ethernet wall port the Verizon guy installed.Not so easy of course, my E4200 will not recognize the ethernet from my ONT (I think that's what the device they put in my basement is called) and the internet doesn't work. I have factory reset the router.The reason I am doing all this is because the wireless range of the e4200 at 2.4ghz is near unmatched and given my house, the actiontech cannot reach my room.
View 9 Replies View RelatedI just bought a new Linksys E4200, and connected it about an hour ago. I have a 30Mbps internet connection when connected direct to the modem, but when connected wired to the router, max speeds are 8Mbps.
View 2 Replies View RelatedI have a problem with the e4200 router and a mybook 1 TB connected to it. The media server works fine but after a while i loose contact with the router and the server this means that the Cisco connect doesn't work, the 192.168.1.1 doesn't work and I can't find the disk via \. I do have internet connection via wifi as im using it now....why I loose connection to the router? The lease time is 24h and it can happen more than once in a day.
View 4 Replies View RelatedU just bought a new E4200 router to enjoy 5ghz band for the first time.I noticed the range at my house of the 5gh is smaller than 2.4 is that right?one of my pc is having trouble keep connected to the 5ghz signal or the router doenst respond to it, is there a way to improve that signal?
View 2 Replies View RelatedI noticed some serious random ping spikes in online games and found that the connection between my Laptop and the E4200 is very very unstable. Sometimes it works perfectly fine but at other times my ping will spike each 5 seconds to three or even four digits and back to normal. I never get disconnected but playing is obviously not possible.
I ran several pingtests through pingtest.net and got everything from 15ms ping 3ms jitter to like 400 ping 300 jitter.
Eventually, I pinged the router (192.168.1.1) and got delays between 2ms and 300ms for both the 2.4 ghz and the 5ghz network. The 2.4ghz channels are fairly crowded but the signal is perfectly fine and stable. The 5ghz band is totally free therefore interference shouldn't be a problem i guess.
I have recently purchased a WD My Book Live and connected to my E4200 Router. I am trying to access this device using FTP from outside my local network. I did all required setting but with no success. I am able to connect to this using FTP from within my Local network. I used nmap to find scan the ports and it says port 21 filtered.
View 9 Replies View RelatedI am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
I'd still want the E4200 to have a SID key for LAN access security.
I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.
I bought Linksys E4200, at a time that is the TOP of the line Cisco routers for Home use.I noticed a serious usage issue with it, I could not identify which are the wifi devices connected to choose for access restriction or parental controls, as the dialog box state only as "Network device", and software control by Linksys does not have any provision to use MAC ID or any other option "except " looking at the dialog box as "Network device".
View 4 Replies View RelatedHow to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.
View 3 Replies View RelatedTrying to update it to the new smart Wifi but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing.
View 3 Replies View Related