Wireless Router That Will Accept A Usb Dongle Modem?
Oct 25, 2011
I have a three mobile wireless dongle/modem i want to be able to share it, i have found you can buy wireless routers to do this, but they seem to be £60+ because they also contain a mobile receiver transmitter my question is, is there a wireless router, that accepts a usb dongle for the modem connection rather than containing the mobile equipment? which makes it so much more expensive, as the dongle already contains the mobile part anyway tonyuk123 has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 7 Replies
ADVERTISEMENT
May 3, 2011
I have been working on this problem for the last few day and have know idea why its not working but my d link Dir-615 will not work with my qwest q100 modem.
View 1 Replies
View Related
Aug 28, 2012
Is it possible to configure a Westell 6200 DSL modem to accept access via a remote PC? I have a security camera that can be viewed via remote computer access, but I cannot configure my modem to accept a remote access.
View 3 Replies
View Related
Jul 18, 2012
I plugged a wireless dongle to my pc which is too far to plug in to my router. I was wondering how to connect the dongle that is in my computer to my router.
View 1 Replies
View Related
Sep 3, 2012
i have a 3g usb dongle and my desktop is connected by it. now i have netgear. now i wanted to make a wifi hotspot in my home.i have connected internet via 3g usb dongle, then in network and internet i have changed the change advance setting by making home and public sharing on. then i have connected LAN to desktop to router, then i have changed internet protocol 4 in properties of LAN, by taking the IP address, subnet mask, gateway,DNS server of my service provider and applying same to LAN IPv4. i have doubt that gateway was 0.0.0.0 which was not accepted by LAN.i have left it blank.
View 1 Replies
View Related
Sep 23, 2012
i want to connect my dongle and wifi router into as one in my laptop.
View 3 Replies
View Related
Apr 14, 2012
I have a laptop in my Office that connects to the internet via a USB dongle. The USB dongle is my only access to the WWW. (as there is no cable in the area) I want to add a wireless LAN to the laptop using wired connection to a wireless ADSL Router in the adjacent building. (there is no ADSL available. Just want the Router for it's HUB capabilities)I have connected the LAN port on the laptop to one of the LAN ports on the ADSL Router via a cable.My plan was to then create a LAN in the adjacent building by adding wireless and wired devices (PCs, ipCameras etc...) to the ADSL Router.When I attempt to setup the ADSL Router, the laptop sees the Wireless Router as conflicting with the wireless attributes of the USB dongle!
View 3 Replies
View Related
Jul 22, 2012
I'm trying to connect my printer to my wireless network via my new Netgear Gateway 7550. The printer will not accept the Wireless Network Key for the router.Had no problem with the old 2Wire gateway.
View 1 Replies
View Related
Feb 27, 2013
I am using TP-Link wireless router model no. TL-WR941ND.my isp provided static ip via cable modem.ip = a.b.c.d subnet = 255.255.255.254 = /31 but the router does not support subnet mask saying wrong subnet mask?
View 2 Replies
View Related
Mar 26, 2011
No Matter what I use-admin/new user or group I assign... CAN NOT login from the outside IP!I can see it/map it and access it all day from my network, no problem. I get at 530 login error everytime I try to come in from the outer world. I have a static IP and cannot get in. It will prompt me for user name and password so I know it is responding to my query. I need to get this fixed ASAP!
View 8 Replies
View Related
Jun 4, 2012
My current unit is at Firmware Version: v1.02.8 What can I do?
View 3 Replies
View Related
Feb 11, 2013
When I plug in the power cord to my EA6500 all the LED's on the back, and the white Cisco on the front come on solid, then the lights on the back go out and the white Cisco light starts blinking faster than every second. I can't get it to stop blinking no matter what I've tried so far.
It won't let me connect to it at all. I've tried everything I can think of, and have tried almost everything I could find in Troubleshooting in Cisco Community. The Linksys Smart Wi Fi Router setup says "We could not find your router."
I've also tried using the red Reset button and the light never stops flashing. I've tried pushing the button quickly, holding it down for ten seconds, and holding it down for more than 30 seconds, but the light continues to blink. I've also unplugged it and waited more than 10 seconds, but nothing seems to work.
View 2 Replies
View Related
Dec 19, 2011
I bought the Telkom wi-fi router with A 3G dongle. If I plug the 3G dongle directly into a laptop it picks up immediately but when I plug it into the router it doesn't pick it up at all.
View 2 Replies
View Related
Jul 11, 2012
I just upgraded to the EA4500 for added range, etc. I'd like to let TiVo have the 5g side and use the 2.4g side for everything else. How can I even tell which band TiVo is using?
I tried setting TiVo up manually but it won't accept the password/key for the 5g band. I gave up and used the "push button" method, but I have a feeling that puts it on the 2.4g band.I do have two different SSIDs and two different passwords.
View 6 Replies
View Related
Jan 23, 2012
My Linksys WRT120N router doesn't accept my cellphone's MAC address... Phone's MAC address is AC:81:F3:08:13:F5 but upon adding the MAC address Internet Access Priority Category based on MAC address, I get an error "Assign MAC address is incorrect".
View 1 Replies
View Related
Apr 30, 2012
I bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
View 2 Replies
View Related
Apr 18, 2013
I am looking at buying the EA6500 router. However, before I make the investment into buying this router, I need to know some basic information first.
1. I want to setup the EA6500 to accept FTP requests to my Windows Home Server. Yes or No?
2. Remote access to the EA6500, Yes or No? i am aware of the security risks
3. I need to setup Port forwarding on the EA6500. I assume I can?
4. Manage a Kindle Fire and other wireless devices?
View 5 Replies
View Related
Oct 10, 2011
I changed my E1000 router name successfully, and then went into the Administration section to change my password. After changing the password and clicking on Save a small screen pops up asking me to verify my router's username and password. When I enter the exact same user name and password it does not accept them. When I try to enter the old user name and password it does not accept them either. I then try combinations of the two and it still will not accept the input. I have reset my router 4 times now and this keeps occurring. I am completely baffled.
View 6 Replies
View Related
Nov 19, 2012
Can I use 3G dongle with wifi router using USB to RJ 45 converter,how to config the same...Also, using same converter; can I convert/share /use my external USB storage device over wifi router...
Router details --Asus RT-N10E Wireless-N150 Router
Dongle details - Huvai EC156
HDD- Segate external usb 1/2 TB (with adapter)
View 8 Replies
View Related
Jan 28, 2012
I was wondering if it is possible to use a 3G USB modem with a linksys E4200 router so that I can share the 3G internet wirelessly. I am willing to install unofficial firmware.
View 3 Replies
View Related
Oct 19, 2011
router will not accept kodak printer
View 1 Replies
View Related
May 9, 2013
We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?
View 3 Replies
View Related
Jun 23, 2011
I have a 3 Network USB Dongle which is the only thing that will work for receiving broadband at a remote location.
Also have a Kasda WiFi router It has a USB port on it (whether it is connected to anything inside?)
We want to send wifi around the house with the 3 Network broadband - can we utilize this router or have to get something else
View 4 Replies
View Related
Mar 31, 2013
Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : Not Clear
im currently on three netowork usb dongle e3231 and wanting to setup a WiFi network using this dongle would the mr 3220 be a suitable router for my three dongle? also on the tp link site it says the router is battery operated is this the case as im sure it loooks like theres an adaptor plug on the back.
View 2 Replies
View Related
Nov 10, 2011
I need to put a FWSM and a line card WS-X6148A-GE-TX to a router 7606. The FWSM version is 3.2(13). The router is running IOS 12.1(18)SXD3. The Cisco document here says the required IOS for router 7606 is 12.2(18)SXF or higher. I have downloaded the IOS 12.2(33)SRD4 and loaded it to the flash card. When I turn the router on, it doesn't load the new IOS and goes to rommon. Which IOS I should use to make the router 7606 work and accept the FWSM.
View 2 Replies
View Related
Jul 16, 2012
I'm having trouble connecting my 02 dongle to the internet using my router. My router is a TP-LINK MR3420 and my 02 modem device is E1752. I checked to see if the modem is compatible and it says it is. I went through the configuration that was given to me with the router and I tried using you tube but nothing. Do i need to get a static I.P address off my Internet provider? If I plug my 02 USB dongle directly into my computer it works perfectly and I got the router to work using a Ethernet cable and plugging it into the WAN port at the back of the router but I would prefer to let it connect through the 3g port
View 3 Replies
View Related
Mar 29, 2011
I have Netgear router and can't connect to Sony TVI thought earlier comments would solve my problems with my Sony KDL32EX713 but No.I didn't do anything at the router admin side as I couldn't see what could be changed (I'm on Vista). Its IP is 192.168.0.1I looked at adding a wireless device but it lost me.On the TV I tried the manual set up on that Bordersman suggested with the above in the default and DNS lines. leaving the sub net unchanged at 255.255.0.0 and the IP as 192.168.1.15.I said No to Proxy sever (didn't understand the comment about DHCP. It searched and came back with wireless device ok but local and internet connection failed
View 8 Replies
View Related
Nov 10, 2012
I have idea netsetter(huawei dongle e1732) and i had unlocked it and now i am using tata docomo sim card on it.now i want to use this dongle in wifi router 3g usb modems.but i am not sure that the dongle can work on router modems or not?i wanna make hotspot at home using dongle in router modem.
View 1 Replies
View Related
Mar 25, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP : aircel,idea
I bought this router just today, but it cant recognize my huawei e303c 3g modem.i've upgraded the firmware. This router supports the dongle or not?
View 2 Replies
View Related
Mar 27, 2011
How can I set up my TV to accept video media via wifi from DLNA router from my lap top?
View 4 Replies
View Related
Apr 8, 2012
I can't get access to my router. Won't accept admin password or 1234 .
View 3 Replies
View Related
Dec 11, 2012
Region : Belgium
Model : TL-MR3040
Hardware Version : V1
Firmware Version : factory default / most recent update
ISP : Mobile Vikings
I was configuring a device for one of our customers, but when I was setting up the MR3040's internet connection settings things went haywire.there's only a default selection for two of my country's providers. No biggy you'd think.
View 2 Replies
View Related
Aug 23, 2011
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies
View Related
