I can never get consistent wifi in my home. I don't know if its because of the concrete walls with rebar inside them or what, but after two rooms I get literally zero wireless signal with my E3000 or WRT54G running boosted signals. Is there some router I can buy that just blasts the strongest signal possible?
View 3 RepliesWhat is the easiest way to boost the the signal from a wireless router(1 year old), weak signal going into a different room. Yes has to go around a wall into another room.
View 7 Replies View RelatedI have a wireless router that rests across the house next to the modem. The signal is too weak to reach to the other side of the house. Is there a way to boost the signal so I can get wifi from across the house or any other way to get an internet connection without several fifty foot wires going across the house?
View 1 Replies View RelatedI have metal framing in our house and wireless signal is always a problem is there a way to boost my signal strength?
View 1 Replies View RelatedWhat I wouldn't give for Comcast.Is there any way to speed up this thing? It's 3G MIFI. Is 4G that much better,nor is it dependent on the signal?
View 3 Replies View Relatedboost the signal of a wireless router using another wireless router what I mean is that am receiving wireless signal but it is weak can I use another wireless router in my place to boost the signal>
View 11 Replies View RelatedHow to boost signal strength on westell
View 1 Replies View Relatedhow can boost my wireless 3GModem signal?
View 1 Replies View RelatedI've expanded wireless internet using WDS: routers, but only with 1 boost.Is there a limit on how many times I can use WDS routers to boost a signal AND get ethernet connections out of the receiving side?
View 5 Replies View RelatedI'm trying to increase signal strength on my netgear router for my house.
View 4 Replies View RelatedI run a small motel and having trouble with Wifi signal reaching the 2nd floor rooms sufficiently. I have heard of the terminology and it's quite daunting... you have wifi booster, access point, range expanders, repeaters, bridges...etc. Do I need one of booster/expanders/repeaters for each floor? The property is a L shape, the router is in the office on the short side.
| Office (Router location)
|
|
|
|
|
|
|
|
| C
| o
| rner rooms
| (low to no signal)------------------------------------------------------------------------------------
Is there any way that I can boost the WiFi signal on my laptop? It is a HP Pavilion dv7, originally had Windows Vista x64, but I wiped the HD and installed Windows 7 Ultimate x64 and went to the HP website to get ALL of the drivers that I needed for this specific laptop.
View 2 Replies View Relatedany way to boost the wifi signal coming for the netgear 7550 ? Mine is very weak and this is the 2nd replacement from at&t.
View 1 Replies View RelatedI have my Westell model 7500 in the barn office. I need the wireless internet in the apartment that was built in the front of the barn. The living room, where I need the signal for Roku, Kindle, and laptop, is approximately 60 to 70 feet from the modem. For awhile I had a low signal strength and I could use the internet but now it is nonexistent in the apartment. The Westell was provided by my internet supplier. How do I boost the signal so that I can get it in my apartment?
View 1 Replies View RelatedI used to have a DLINK router which covered my whole house with its Wifi signal. After upgrading to the SRP541W router, only the very close vicinity of the router has any acceptable level of signal to use devices. I seriously need to improve WIFI range to accomodate my small business. I asked the Live chat technician and the answer was "This device does not support external antennae" and then silence. Okay it is not supported but what I am looking for is a solution, not a dead end.
For example, is there a cisco repeater/extender that I could deploy that works with the SRP541W router? Any experience adding one long cable and putting one antenna at a different location of the house?
How to successfully increas the signal range of the WRT310n? I live in a huge old place and the signal drops to one bar (dial-up speed) about 40 feet across the building. However, at the room before that (maybe 30 feet) my Apple Mac book gets great signal and it's no problem. I need to connect the Mac and 2 PC laptops wirelessly.I'm not sure whether to try a signal booster, set up another access point (or how to do that anyway), or what? Running a cable is unfortunately not an option.I also have a WRT300n (which was replaced this weekend with the 310n). Not sure which one really is better, but the 300n router's range didn't even make it as far as the 310n does. (There was weak signal, no active bars.) Someone suggested adding a more powerful antenna to that router instead?
View 3 Replies View RelatedI have Att internet services and the modem I received from them has WiFi with it. The signal that it produces is very weak. I was curious if there is any way to use my E3000 to boost or repeat the signal so WiFi will extend through out the house.
View 4 Replies View RelatedI have a new e3000 series router and on all pc's I'm using model AE1000 receivers. Now, the laptops we use work great until we go out to a room built off the main house (a seasonal porch)
View 2 Replies View RelatedI am using Dell Inspiron 1525, 2008 model with a 1395 WiFi Mini card. The signal strength I get is very low, whereas people in the same location get good strength with other laptops like Sony etc.Is there any way of improving the signal strength without disturbing the router/modem, like some software/ hardware changes in the Laptop. Dell havent answered yet.
View 2 Replies View RelatedCan I use a Linksys WRT54G router to get a signal for my desktop? I am using a modem that has wifi downstairs and want to get a signal for a desktop I have in the kids room upstairs
View 4 Replies View RelatedI have a linksys wrt54g wireless router and a few weeks ago my wireless connection started to become inconsistent, it would randomly drop service or be very slow, and now it has become very inconsistent and slow, all the while the wireless signal would be 4-5 bars.On my windows 7 desktop, often times the yellow triangle with the exclamation mark pops up over the signal strength indicator when its at 4-5 bars.I've tried changing to 2 different routers and its the same, and the problem is persistent for all computers in the house.I've connected directly via ethernet to the modem and router and service was fine.There are a few wireless networks in the area,some with quite strong signals, but I downloaded the xirrus wifi inspector and it says I'm not sharing a channel (channel 1) and though I'm ~15ft from the router, the signal is ~65dbm, which seems low and is almost equivalent to neighbor's wireless strength.
View 2 Replies View RelatedMy wireless router has been spotty since my cable company installed a new modem for cable internet. I have powercycled several times, downloaded new firmware, rebooted and am still having problems. Lately when I do finally get on the internet with a wireless device, the signal strength is very low. It is low on my iphone, on my Mac laptop and also on my Samsung Bluray player. Lately a window keeps popping up when I am trying to watch netflix that states my band width is too low, even though it has been working fine for 2 months. Is my router outdated?
View 5 Replies View RelatedMy cable went out and my neighbor and I have decided to split her at$t broadband, the phone/modem/router is a 2wire.
I have 3 windows 7 computers but only one wireless g usb wireless adapter from tenda. I also have a linksys wrt54g wireless router that I can use.
I have tried to set up the router as a wireless bridge by loading a DD-WRT bin on my linksys but it seemed way buggy -results - I was only able to get 2 of 3 online and if I restarted any of them I lost the connection completely.
Went back to stock firmware and tried to set up a lan between the 3 towers with the linksys then just bridge the two connections on the main pc - results -no internet at all on 2nd and 3rd pc... and when the connection to the wifi network is started I loose my networking to the 2 pc's on the linksys.
Im not sure if im not setting these up correctly as im just following guides and such but since im fairly good with computers this is making me crazy...to be able to set three computers up on 1 good clear wifi should be an easy task but it's just not working out..
it might be good to point out first that this was never a problem before i began fixing a completely irrelevant problem (screen broke) with my laptop, which took around three weeks. i could at that time use the internet a couple of rooms away from the router just fine, but now it's a no-go. .
the model is WRT54G, and the serial number is CDFD1F9CJ507.
I have a Linksys wireless-g broadbrand router ( WRT54G ) in my bedroom along with my cable modem and everything runs fine in my room. But I also have a pretty old computer in another bedroom about maybe 15 or 20 feet away from the current setup. On that computer I have a wireless g adapter that's connect through a usb port and has very low signal strength. I sometimes use that computer and I'm always getting kicked off I'm guessing because the signal cuts out. So, today I plugged in the adapter in my room with my setup and had amazing signal. What can I do to give that other computer a good boost? I know I should update that computer but I'm guessing I also need to somehow boost the signal somehow.
View 6 Replies View RelatedNew wireless router was installed yesterday. I switched from Linksys WRT54G v. 5.0 to Medialink N. I hardwired to desk top first. Then I turned on my laptop and connected to the internet without problems. Next device = Acer Aspire netbook. The netbook receives a strong signal from the router but cannot connect to the internet.
View 1 Replies View RelatedIs it possible to configure the WRT54G as a repeater signal of the WRT120N?
View 1 Replies View RelatedI am having problems connecting to my wireless internet. We were getting a poor signal so we moved our router to our living room where we always are, but now we can't connect. We tried resetting everything, turned on and off several times. Went to the linksys wireless set up page, changed SSID and password. Still can't connect with the computer or our iphones. It shows our SSID is there but won't connect. My internet when plug directly to the computer works fine (I am using it now). My computer can connect to the router Linksys WRT54G, we just can't get it to connect to the wireless.
View 1 Replies View RelatedI recently bought the top end ea4500 hoping its "high end" claims would get a better wifi signal in my bedroom(on my iphone 4s) than what i was getting with my WRT54G.The end result is it constantly drops signal completely or shows my network but when I try to connect says "cannot connect to wireless network" even though it's staring me right in the face. When I hook my WRT54G up, I get a signal.. all be it weak, but at least it doesn't drop out on me.Did I just waste almost $200 on a high end router that can't push a signal out stronger than my almost 7 year old WRT54G? or am i missing some setting that will make this EA4500 worth its claims? settings info:everything is pretty much on "default" aside from the SSIDs for the different bands and the corresponding WPA passwords.
also another problem, it seems like the router itself craps out every 60-120 minutes, no leds lit up on the router and my modem (Cisco DCP3010) shows no "link". Yet when hooked directly to the PC there is a "link", so pretty sure its the router and not the modem.
I have a office that was converted from a older townhouse. The building has 3 floors with the distant of each floor expands no more than about 60 - 75 feet from end to end of the building. Not sure what's in the walls as the building is at least 20-25 years old. Total number of users is about 20 - 25.
Here is the problem..
I have a WRT54G wireless router setup to provide wireless coverage for this office, located on the 2nd floor, For some reason, about 10 - 15 feet from the opposite end of the building, the signal drops off big time. Regardless of the floor. So to assist with the signal, I installed a wireless 300N Gain extender on the same floor on the opposite end of the building where the signal was weak. At first, it seemed to work by boosting the signal, but then it seems to show the same issue as before.. sporatic signal loss, signal fluctuation, etc.
My question is should I replace the wireless booster with multiple wireless APs located throughout each floor... maybe 1 per floor? If so, is there a trick to configuring all 3 APs to have the same SSID and same encryptionsso it will be seamless to the users? Since the first AP works fine, I wanted to get 2 additional WRT54G units.
My old WRT54G V8 router has been acting up lately. It keep dropping the connection out of the blue. Sometimes I'd be browsing the Internet when the router's signal vanishes completely, it disappears from the list of available wireless networks on not just my computer, but my smartphone and all other devices in the household! Other times I keep connected to the network but there's no access to the Internet. Everything seems fine on the ISP's part, I can connect just fine directly from my modem, so I'm certain the problem is with the router. Besides, these problems are solved by just power cycling the router.
View 4 Replies View RelatedI have a LinkSys WRT54G Wireless-G Broadband Router located in my basement office. My IBM T42 ThinkPad running Windows XP Pro has an Intel(R) PRO Wireless 2200BG Network Connection adaptor. The signal strength on the main floor of our townhouse is ~ 80%. My problem is the signal frequently disconnects then recovers automatically causing frustration when browsing the internet. My question: Should I upgrade to a new Wireless N router OR purchase a WiFi Range Extender? since my laptop has a Wireless-G adaptor would a Wireless-N router provide a stronger signal?
View 4 Replies View RelatedHave two WRT54G Wireless Routers.
-One WRT54G ver. 6, Firmware Version v1.028
-One WRT54G ver. 6, Firmware Version v2.x
With the WRT54G ver. 6, Firmware Version v1.028.When I ran the android app WiFi Analyzer, I get mixed results.On my Samsung Galaxy S3, I saw my signal on Channel 2, and others around me (two on Channel 6 and two on Channel 11).On my ASUS Transformer Prime TFT201 I see the same signals, but my router signal bounces continously between the baseline (-100dBm?) and about -35dBm.
Plugged in the WRT54G ver. 2, Firmware Version v2.x Channel 8.Hooked it up and got good steady signal strength. It Had 'WPA - Shared Key' but did not have the 'WPA - Personal' that was on the ver. 6. So, I had to go and screw things up. I've upgraded this to Firmware Version: v4.21.5 and guess what? I now have 'WPA - Personal'. I also have a signal is bouncing on BOTH units.
On my ASUS, I can see both routers. The ver. 2 AND the ver. 6 are bouncing between baseline and -35dBm, in unison. Apprently something in the ASUS does not like the later Firmwares.On my Samsung I can see the two signals - the ver. 2 on Channel 8 is stable as a rock and the ver. 6 on Channel 2 is also bouncing, but at a much slower rate! Running Speedtest.net a PC hardwired to the ver. 2 - I get 5.34 Mb/s Download and 0.47 Mb/s upload (yeah, my Internet sucks!) Running Speedtest.net through the ASUS/WiFi to the ver. 2 - I get 2.43 Mb/s Down and 0.65 Mb/s Up.Running Speedtest.net through the Samsung/WiFi to the ver. 2 - I get 5.07 Mb/s Down and 1.07 Mb/s Up.