Is there any easy way to tell what networking level my laptop is capable of? Its an older IBM, T30.Wireless works fine but I'm thinking of upgrading the router and want to make sure the laptop will connect using the faster N network speed.
View 5 RepliesI am having trouble with setting up connection between pc using windows 7 and a laptop using windows xp. Do I have to setup a separate network on my laptop?
View 1 Replies View RelatedI think that's what I want to do. I have an HP desktop with vista and cable high speed modem and a linkys attached to it for wireless. My laptop is a toshiba with wireless running windows 7 and I use it upstairs wireless to connect to the net. There are times I need a file from the desktop and I have to go down and put it on memory stick to copy it over. Is there any way I can access the desktop from the laptop without having to do that? Would need step by step instructions to set it up if it can be done with 2 different operating systems.
View 11 Replies View RelatedI have a tata photon+ which the provider said that the speed is up to 3.1mbps but i m gettingonly the speed of 128kbps not more then that so any1
View 5 Replies View RelatedLaptop with Windows XP Pro, connected to the network via Wifi, and set up as a remote desktop host. Can not establish a remote desktop connection with this laptop. Log-in screen is presented, but the desktop never appears on the client machine. Connecting the subject laptop via an Ethernet cable, cures the problem, and the connection succeeds, so we can rule out problems with RDT configuration, firewalls, and third party software. The laptop is a Dell D610, with a Dell 1370 WiFi built in. It has been configured so Windows manages the connections.
View 3 Replies View Relatedi have a wifimodem router so enabling the wireless access on the setting allows for both the desktop an laptop 2 have internet my problem is i wanna network the 2 system wirelessly using the regular options on my xpdesktop so to access files from either pc once connect what are the steps to go about to use this??the last ting i tried was wireless network on my xp ssytem did the flash drive ting it was accepted on the laptop but on the workplace computer only my system was showin up an not the laptop so i tink the workgroup on both system are called dif names
View 1 Replies View RelatedHaving HP Pavillion DV6000 laptop and the cd/dvd drive worked fine up until they got a virus on the computer and then went to Walmart and purchased an AV program and installed and ran the AV program. I think the program was Norton. I have completely scanned and removed everything I can find on the pc with numerous programs, but the cd/dvd drive still does not work.
Here is what the drive does...when a disc is put in the drive light comes on and you can hear and feel the drive spinning (I have tried 3 different drives in the computer and they all do the same thing). The pc will not boot from any disc...they light comes up at boot up, but will not boot. Putting a disc in the drive in Windows and trying to access the disc you get something like drive not ready, insert a disc. All connections are solid. The drive shows up in Windows Explorer as well.
I have a Dell Inspiron Laptop N7110 my hard drive was corrupted, I have wiped it clean and reinstalled Window 7 I went to dell support and downloaded all the drivers and intalled them in the order dell suggusted. I have no internet. The driver for networking said I did not have device. How do I correct this.
View 4 Replies View RelatedRecently i got my motherboard replaced due to some technical issue and now the networking doesn't work... i Tried re installing the drivers but nothing works...
DETAILS:
Dell inspiron N5420 laptop
OS: Win 7 Ultimate 64 bit
Qualcomm ethernet drivers
Currently I'm using BT Broadband with a Cat 5 Ethernet cable.My laptop has a gigabit Ethernet port, and I have the cable plugged in.Is there a way to determine whether or not the cable is capable of 1000Mbit/s, as I am receiving 100Mbit/s, when I check the connection.Also, will replacing the cable with a new one achieve the full 1Gbit/s?
View 14 Replies View RelatedI run an Allen & Heath digital mixer. The iDr32 mixrack sits on the stage and has a 2 port Ethernet switch on board, which allows the device to be controlled with a PC. If you then add a WiFi router then you can have wireless remote control from a laptop. Allen & Heath also sell an app for iPad to do the same. I have this working quite well although I am receiving no metering data from the Mixrack. Allen & Heath say this is probably because my router does not support multicasting. They list some routers which are recommended, but the list is rather out of date. I am trying to find a suitable dual band router with decent range on both bands. I would prefer a cable type, but since it will not be connected to the internet, it isn't important. When I Google "Multicast capable wifi router" all that comes up is a lot of stuff about video streaming. None of the manufacturers seem to list if their product supports multicasting. I understand that multicasting is usually used for video streaming, but in my case it seems to be a requirement to speed up data between the iPad and the Mixrack. Apparently some users of similar systems have encountered problems with multiple smartphone users in the audience seeking WiFi connections. The solution to this is to use 5GHz band, and switch off the SSID. Some have also found it best to use MAC filtering for security.
View 4 Replies View RelatedI have a 1841 Router running C1841-ADVIPSERVICESK9-M ver 12.4(12), is this IOS VPN capable, if not what IOS would I need to run a VPN?
View 2 Replies View Relatedi wanted to know if there is any way to use poe from 6504 switch which is capable of burn a NIC?if there is a Way ' can you tell me how i can do it ??
View 10 Replies View RelatedTell me whether my router is Ipv6 capable.Firmware Version: A1.01.09 , 2008-06-13Boot Version: 0.22.02,My Isp is not using this protocol yet, but I want to be ready.
View 2 Replies View Relatedjust upgraded my internet to 150/10 but with speedboost DL speeds hit 250 mbps. I currently have a e3200 and it tends to max out at 110mbps, any router recommendations that will support the full 250?
View 18 Replies View RelatedI can't access my wi-fi network
View 1 Replies View Related[code] Started laptop and couldn't connect to wireless network, which used to work. I tried "netsh..reset.log" , "netsh.." , Repairing the network connection but still not working.
View 8 Replies View RelatedI currently have 2 Cat6509 switches with VSS Capable Sups. One of the switches has an extra 10Gig Lincard. Will VSS still work in this scenerio?/?
View 2 Replies View RelatedI'll have to replace an old WS-C3550-24. Reasons for this: EOL/EOS & we'll need a NAT capable device...
As I understood, the only L3 catalyst that is able to perform NAT is a 6500? Is that correct? If the above is correct, it seems I can only replace the setup by using a router/ASA with a L2 switch. A router with high throughput (+/- 300Mbps) is hard to find, especially as NAT will require CPU resources...
So, my best (affordable price) solution is getting an ASA5520 (450Mbps FW throughput) and a L2 switch?
Which smaller POE switch is capable of powering a 9971 IP phone with a cam and a think client attached?
View 3 Replies View RelatedThere are a total of 7 systems on the network. The network has evolved from two small shops (3-4 computers each) to a single one with a sum total of 7 systems. Historically there were two ISP (which the new management would like to continue). Thus there are two NAT enabled devices at the last-mile from each ISP
Belkin F7D1301
Baton iBLR6111A
Networking is almost an unknown to me. An ip config on the computers in the network brought the realization there are 2 sub-nets ... at least it looks like there are 2 sub-nets (192.168.1.x, and 192.168.2.x).
My gut tells me the above mentioned modem/router cannot be connected & configured to be used transparently for the computers connected to the other modem/router without additional hardware. Is this right?
I have 3560's in my current environment, operating in the core/distro/access layers. The switches are in a star configuration, performs only layer 2 switching, and utilizes copper (no plans on moving to fiber).
With a fairly limited budget, I've been contemplating on upgrading the central node to a stacked 3750X to eliminate that single point of failure, and trunk the rest of the 3560's to the stacked switch. I wanted to be sure that the 3750X switches will be right for my environment (90-100 hosts), and if what I explained above is a good solution.
I'm also looking like to upgrade 6-7 of my servers (and SAN) with 10GB network cards. Do the ports on the 3750X have port densities capable of 10GB? If not, what switches provide that capability?
Our network administrator restricts all our new 1Gb switches to only 100Mb, to which he claims it will increase overall performance. Preventing devices from bottlenecking the network. (that is, only restricting the main switch ports, not the uplinks)For example we have a new building with 2x WS-C2960S-48TS-L connected together with FlexJack and then a 1Gb Fiber connection back to our core switch.
This building is on it's own subnet and there is little broadcast traffic. I don't see the point other than it hinders the potential speed we could use. Labs are set up in this building and 1Gb is MUCH faster when it comes to imaging and software deployment.
Wondering if this switch is capable of being a backbone switch for a network of about 1000+ users and if the switch can handle a sustained 30Meg of data going across it?
View 3 Replies View RelatedI recently installed a very basic version of XP on my old laptop (Gateway MT3707).After hours of searching for the correct drivers, I found them, and installed them. After installing the correct drivers for wireless internet I was able to pull up the list and find my network on it.When double clicking on our wireless network it asks for a network key (also called WEP key or WPA key).Now we have a password for our network, but after an exhausting amount of tries that won't work. I not sure if that is what its looking for. In our apartment we run mac OSX, windows vista, etc., but usually the password for the network is satisfactory. I have never ran into this problem.I hate to be a noob, but I don't know where to go from here.
View 6 Replies View Relatedwhat ios for 827-4v from 12.4 can i use for IPSEC+ddns?i tested some from 12.4 but normally working only 12.3(26)GD, but i want ddns feature? some from 12.4 is working with tracebacks, other is not loading - with error (loadprog: error - program section linked to illegal address)
View 4 Replies View RelatedIs a 3750 sw capable of handling full routing tables and what can you recommend in a small mutihomed BGP router or switch capable of handling full routing tables?
View 2 Replies View RelatedI am on the lookout for free dynamic DNS for top level domain name.There seem to be quite a few free dynamic DNS providers for third level domain but I am having trouble finding one for top level domain. I am almost on the verge of actually mapping the top level domain to a CNAME of a third level domain with dynamic DNS but I really don't want to do that.
View 3 Replies View RelatedWe have a 7206VXR with an NPE-G1 processor. We're running the standard stuff on it, but here are the highlights.We just enabled netflow on it to send the data to an external source for analysis and the overall CPU level increased, but not significantly. About what should we expect for the overall CPU level? At this point, it's averaging close to 40% during peak hours.
View 4 Replies View RelatedIs L3 ip routing on by default in 3550s? If so is the "ip routing" command visible in the config file? If no - I assume that one would enable L3 routing with that config command.In general terms are there any IOS devices where ip routing is enabled and one would not see the "ip routing" command in config. I.E. if that command is not visible in the config could you assume there is no L3 capablity in that device?
View 1 Replies View RelatedI have ASA 5505 that has two inside security level 100 interfaces and an outside interface.On the inside interface we have corporate domain subnet with DC and 30 hosts. On the inside2 interface I have few servers that runs specific application important for our business needs, and dumb terminals that are connected to them.I have a laptop user that periodically needs access from our corporate vlan1 to one of the servers on inside 2 vlan via remote desktop or some other remote viewer client,so he can view reports etc.I have enabled same-security-traffic intra-interface command and added nat exempt command pointing specific laptop host machine to that specific server.
Now my main concern is regarding security. This user carries his laptop home, browses the web, puts USB memory, and you can imagine how this machine is susceptible to all kind of malicious software. Inside2 vlan is very important and until now it has been a very secure environment.This is no longer the case since all traffic between this inside sec level 100 vlan host and corresponding inside2 sec level 100 server is now allowed because of the enabled same level interface traffic and nat exemption rule. Do I have another solution that would allow communication based on just a tcp port number for this host? Something like port forwarding from outside to inside Vlan interface?
We have wireless in the house, the router, etc is down in the basement where my office is. Is there any way to increase the strength to the main level of the house? Our house is standard size, but it seems to weaken upstairs.
View 4 Replies View RelatedI have an ASA 5520 8.2(5) with ACS 5.1, I made the configutation of Authentication and is working well, now how I can configure the authorization and get into the privileged level 15 mode directly.
View 6 Replies View Related