What Is The By-pass Mechanism Used In Ring Topology
Feb 2, 2012the by-pass mechanism used to isolate the fault if any link fail.
View 3 Replies
ADVERTISEMENT
Cisco Switches :: Connectivity With SGE2000 In Ring Topology?
Oct 10, 2012I´ve got a strange problem with the connectivity within a ring topology.There are five switches from the SGE2000 series and one SG200-50.The SG200-50 is the root bridge and RSTP is configured.From the root bridge switch (Switch 5) I can ping Switch 0.But I cannot ping Switch 0 from PC0.
On the other hand I am able to ping all other Switches (1-5) from PC0.In addition to that I can establish a RDP connection from PC0 to Server0.This tells me that there is no general problem with the connection from PC0 to the Switch0.
Right now when I want to configure Switch0 the only way is to connect to Server0 first.But we have to move Server0 and this is why I want to manage Switch0 from PC0 like any other Switch on that network.
Cisco VPN :: 5520 - Getting Unauthorized Connection Mechanism
Jun 12, 2012I have a Cisco 5520 cluster and Cisco Anyconnect Secure Mobility Client 3.0.5080. I eventually want to connact by means of a Smard Card and I was able to connect a view weeks ago. Now I am hastled by the error Logon denied, unauthorized connection mechanism, contact your administrator. Well that's me and a do not know anymore where to look on the Asa. I thought it had something to do with the authentication method, but AAA (AD or Local), nor cetificates is now working.
Cisco's solution...:
Error: "Login Denied , unauthorized connection mechanism , contact your administrator"
AnyConnect clients are failing to connect to a Cisco ASA. The error in the AnyConnect window is "Login Denied , unauthorized connection mechanism , contact your administrator".
Cisco WAN :: 3560X With IP Base In The Ring
Dec 27, 2010I'm planning to use 2 3560X (access switch) on two different locations connected over two 2921 routers in small ring. 3560Xs are directly connected via fiber. Each 3560X is conected to its own 2921, and 2921s are connected together with GRE over IPSec. So they are creating ring.I'm planning to use small area 0 in this scenario. There are less then 200 routes in the network. Will 12.2(55) IP Base on 3560X support this scenario or I will need IP Services image? "OSPF for routed access" is still little vague to me, there are only tipical case study scenarios.
View 22 Replies View RelatedWhy Dual Ring Network Is Counter Rotating
Jan 31, 2013In the Dual ring network using the token passing method, we have the primary ring and the secondary one where in the normal situation only the primary ring is carrying the token in one direction and when this ring is down the secondary will start into operation and takes the token and rotate in the inverse direction of the primary to reach its destination. Why the secondary ring doesn't continue in the same direction to the destination?
View 10 Replies View RelatedCisco :: CUCM Feature Ring Like CUCME
May 28, 2012I've looked in many places but cannot see how or if it is possible to configure a phone, in CUCM to have a feature ring instead of the normal ring.In CUCME you go into the ephone x configuration mode, and assign the DN to the phone with the button xfx command. What this gives you is a slightly different ring tone when a call comes through. If I am not mistaken it is the same ringtone they use on the show "24".Is there a way to do this "feature" with CUCM?
View 1 Replies View RelatedTransfer IPTV Signal To All Sites Along The Ring?
Apr 26, 2011My topology is a physical ring, and I need transfer IPTV signal to all site along the ring.For example:
A (headend)--- B --- C --- D
|______________________|
Note: -----: have spoke-mesh defination
_____: no spoke-mesh defination to prevent loop
So, with MPLS/VPLS I can implement it. With spoke and mesh defination, the traffic can transfer form A to B, C or D as drop-continute action in ring topology (between different VC). Everything is good, FRR can work very fast. But when the topology have a failure link, for example the link between B and C, at that time the traffic will go from A to B then B come back to A and A --- D ---C. This action is so stupid, because it can increase delay, jiiter in network. On the other hand, when the node failure ( B failure), C will loss the IPTV signal, even the link from A--D--C always good.
Token Ring To Ethernet Network Converter?
Aug 27, 2012I'm in a dorm room with an outdated token ring connection that includes phone line ports and cable for my television. In other rooms people are using this to convert their laptop/router to an ethernet portIt converts old token ring ports to ethernet.
View 1 Replies View RelatedCisco WAN :: 2912 Token Ring Support On ISR G2
Dec 5, 2011My customer wants to replace some Cisco 2912 by new routers, but I can't find a way to add Token ring Network Module on 2951 or 3925 routers with the Cisco configuration tool.Does token ring is still supported on ISR G2 routers?
View 5 Replies View RelatedCisco :: VoIP Phones Customization - Ring / Backgrounds
Mar 12, 2012has anyone here played around with uploading compatible audio files for custom rings and MOH and/or personalized backgrounds for the phones? I was only taught the basics in our CUCM v6.0.1 and am looking to figure out how to get some good music on my phone as well as play around with other "cosmetic" features. The phone I'm testing with is a 7971(color).
View 4 Replies View RelatedCisco :: RSTP Configuration - 14 Switches Interconnected In Ring?
Apr 2, 2013I need to setup a layer 2 network consisting of 14 switches interconnected in a ring. Obviously, the design of 14 switches in a ring network is dumb, not here to debate that. Unfortunately, it HAS to be a ring. I've been researching the best way to configure RSTP for this. From everything I've read all I really need to do is configure Primary/Secondary root bridge in the center, and change the Maximum Age field to at least 16 seconds? From what I've read you want a minimum of 3 second buffer + 1 second for each hop due to message age being added by each switch hop?
View 8 Replies View RelatedCisco Switches :: Configuring ESW-520-48P For VoIP / Ring Central
Apr 26, 2011I am looking for a Best Practices or a few places to pay attention to in the Cisco ESW-520-48P switch I have. My VoIP solution is RingCentral, and while they are Cisco phones, I've been hestitant to setup VLANs etc. the way I am used to. Plus setting up Auto QoS seems different than what I am used to with a 3750 switch.
Right now I've left the Smartports Wizard alone, and none of the ports are configured. There are no VLANs or QoS on the LAN currently.
What I was running into were calls cutting out where one side wouldn't hear the other anymore, but the call would remain connected. However, this has happened in this small 15 person office, when there is only one employee here after hours, talking on the phone. There isn't any heavy network traffic, because I have network monitoring showing me low usage (no streaming music, videos, or anything else).
This switch has a Gb connection to a Linksys SR2024 (the server switch), which is also set at Factory Defaults. I mention that because I recently bypassed the ESW-520-48P, and plugged one phone into that switch and the RingCentral phone worked fine for outside calls.
Is there something besides QoS that I should look at in the ESW-520 switch that might be causing a checkpoint of some sort, or interrupting VoIP traffic that I need to configure or disable?
And are there any Best Practices or scenario guides for this switch? I found the Admin Guide, but it really just explains every option in the GUI for the switch. And it seems all of my CCNA training isn't working with going in and quickly troubleshooting this switch besides knowing that something in it could be hanging it up.
D-Link DCS Network Camera :: Focus On 920 By Adjusting Black Ring Around Lens
Aug 30, 2012Just discovered I can change the focus on a DCS-920 by adjusting the black ring around the lens. It can be focused from very close, just inches, to infinity. I don't see this in any of the DLink documentation.
View 2 Replies View RelatedCisco Firewall :: Polycom HDX 7000 - Video Calls Through FWSM Ring But Cannot Answer
Dec 26, 2010Running FWSM Firewall Version 3.1(4)
The problem is that calls originating from the outside of the firewall to the inside will ring but you cannot answer. The internal video conference server is a Polycom HDX 7000. There are ANY/ANY rules to/from this server and the default application inspection policy is set for h323/ras/h225 as follows:
[code]...
Cisco Switching/Routing :: IE2000 Industrial Ethernet Device Level Ring Support
May 3, 2012Have a potential customer that is looking at the IE2000 series switch and at the Rockwell Allen Bradley switch
Question is does it support Device Level Ring (DLR) capability. I do not see this specifically mentioned in the Data Sheets but it talks about a
Resilient Ethernet Protocol (REP) and I am wondering if this is the same thing?
Network Topology IP Addresses And Vlan's?
May 28, 2012i create a network topology ( i attached picture) and i don't know what exactly IP addresses should be assigned to routers and switches + there should be five VLAN's created and just one vlan (vlan 2) must see others vlans (for management purposes) and others vlans should not see each other. So i need that: 1) What IP addresses should be on routers and switches 2) How to create a 5 vlans, that they should not see each other, but one should see all, for example where i have to put "tagged" ports where "untagged" or "not member" ports etc.
View 1 Replies View RelatedGetting Network Topology IP Addresses And Vlan's?
May 28, 2012i create a network topology ( i attached picture) and i don't know what exactly IP addresses should be assigned to routers and switches + there should be five VLAN's created and just one vlan (vlan 2) must see others vlans (for management purposes) and others vlans should not see each other. So i need that: 1) What IP addresses should be on routers and switches 2) How to create a 5 vlans, that they should not see each other, but one should see all, for example where i have to put "tagged" ports where "untagged" or "not member" ports etc.
View 4 Replies View RelatedHow To Connect Two LANs With Same Network Topology
Apr 27, 2012how can i connect two offices in the same town.these two offices are separated by two kilometres.each office has ten rooms.how can i provide a secure intranet between the two offices ,what media can be used and hardware to provide a secure intranet via the two offices.
View 2 Replies View RelatedCisco :: LMS 4.2 Topology Data Collection
Mar 20, 2012i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen".Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
View 9 Replies View RelatedCisco :: LMS 4.2 - Devices Not Connected To Topology
Nov 26, 20121)i have problem in LMS 4.2 , he shows most devices not connected to topology sitting lonly even though the have cdp enable , how to force these to join the topology
2)why some devices are shown unreachable , even though i can ping them from lms server and gets reply, also they have community and cdp configured
Cisco :: LMS 4.0.1 - Telnet From Topology Services Map
Dec 19, 2011On a LMS 4.0.1 :I want to know what is the right way to change the telnet program on the campus mgr map (topology services map), when right-clicking a device icon and selecting telnet.I would like to use a tool of mine, and not to launch a telnet command from the IE browser.I changed the default telnet of Windows in the registry, but the program is still launched as a telnet URL in the browser and this is not what I would like to do.
View 2 Replies View RelatedCisco :: LMS 4.1 - WAN Links In Topology View?
Mar 12, 2012The regular problem with the LMS topology and WAN Links when you see the branches are disconnected from the HQ BUT in my case the branches are already connected via Layer2 links but unfortunately some intermediate layer2 modem/switch exist in some branches which prevent CDP discovery but you will find both HQ and branch router in the same subnet .
View 1 Replies View RelatedCisco :: 2960 LMS 4.1 Did Run Topology Service
Jun 20, 2012i have only 1 switch 2960 POE at customer enviroment.i did run topology service and checked on the right side POE CAPABLE Devices
it shows me that i have 4 switch POE while actually there is only 1 switch POE in real enviroment.
Cisco :: Cannot Open Topology Service LMS 4.1
Feb 4, 2012have ether-channel across 2 switches?i am new in cisco LMS . now i am in client site installing cisco LMS 4.1 in UCS server-rack version. we did it well for the installation, and the LMS working properly until i cannot open topology service.
i attached the error message
Cisco :: Does Disabling CDP Affect LMS 4.0 Topology
Feb 14, 2012I have a customer who wants to disable cdp on all switches for securtity reasons. The same customer has also LMS 4.0 installed.
When disabling cdp, does it affect the topology services on LMS? Can you still see the topology tab on device manager or the topology map of the entire network?
Cisco :: EIGRP / Static Route In Same Topology?
Oct 13, 2012I config the routers with EIGRP and also write Static route between two PC before remove the link between router0 and router1 , destination is reachable , but when remove this connection , packet from pc1 to pc0 will drop in a loop and never reach to destination , is it possible to have a Link state routing protocol and static route at the same network like this scenario , how to prevent loop in this topology static route is configure as bellow :
router0 <==> router 1 <==> router2 <==> router3 <==> router <==>pc1
Cisco :: LMS 4.2.1 - Tunnels Missing In Topology View
Jun 12, 2012I have problem with topology view in LMS 4.2.1, it doesn't show the tunnels connecting branches, though both devices are shown in sh cdp neighbour command output. If I choose Show Devices in Admin > Collection Settings > Data Collection, it is showing cdp neighbours correctly.
View 4 Replies View RelatedCisco :: Bandwidth Utilization On Topology Diagram Of LMS 4.2?
Feb 12, 2013I am running LMS 4.2 , using that i am monitering some switches . I am using topology services also. In that i am getting veiw of all connected devices with links. But bandwidth utilization is for those links are not showning in topology veiw .
Is there any settings to be done in LMS 4.2.2 or any configuration changes to done on my switches ? to find the traffic flow bandwidth utilization.
Cisco :: LMS 4.0.1 Topology Services Not Running On Windows 7?
Sep 19, 2011I installed LMS 4.0.1 and every module works from the local server. Http login from a remote system, topology services does not start, complains about java version. I followed the link to install the java version, it then complains about some Ansiserver stuff.
the client os is win7 64 bits, eplorer version is 7.
Cisco :: LMS 3.2 Devices Appear In Topology And Reports By IP Not Hostname
Jun 14, 2012i have a problem that i see the devices by ip not hostname in devices report and topology and i checked in device discovery to appear by hostname
View 2 Replies View RelatedCisco :: Unable To Launch Topology Services LMS 4.0
Nov 7, 2011When i try to launch topology services in LMS 4.0 i get prompted to install a java plugin. When i install this it tells me to restart the browser but nothing is changed, it asks me if i want to install the java plugin again.
View 7 Replies View RelatedCisco Routers :: Possible To Use RV042G For Attached Topology
Mar 24, 2013I'm trying to make an attached topology. This router should be attached to 2 different ISPs on both WAN interfaces (ISP1 with IP address - A.B.C.D, and ISP2 with IP W.X.Y.Z) and I want to use DMZ, too. My idea is to make a L2/L3 segmentation with 2 VLANs - Vlan RED for DMZ (private network 192.168.1.0/24) and vlan BLUE for Internal network (network 192.168.2.0/24). I checked in the manual that vlans are supported, but I can't see anything about 802.1q, can I use one trunk port or I should use 2 physical cables?
There should be inter-vlan routing and basic stateful firewall, so PCs in Vlan Blue should be able to initiate connections to DMZ servers, but the opposite should be denied. Router should make a port forwarding on its both WAN interfaces and forward incomming traffic (from Internet) to DMZ servers (with NAT). Both DMZ servers and internal PCs should have an internet access with NAT over both WAN uplinks.
Can I use RV042G for this setup and if not at all - are there any cisco SMB device which can do this?
Cisco :: LMS 4.1 Topology View N7K Missing Links
Oct 17, 2011I work with the topology view in LMS 4.1. I can see all the links between the differrent switches (N7K, 3750, 3040).I miss only the links between the different N7K's. This links have one special thinks: they are configured as " rate-mode dedicated force" In the N7K cli this interfaces are displayed with the SN too.
sw-bb13# show cdp ne.The links to sw-bb11 and sw-bb21 are not painted in the topoloyview.