Where In Windows Xp Registry Is Wireless Network Key
Apr 26, 2011trying to find in the registry of xp the wireless network key
View 2 Replies
ADVERTISEMENT
Disable Changing IP In Windows XP From Registry?
Mar 1, 2011I want to disble changing IP in windows XP from registry so users can not change their IP adress. I use a workgroup and don't want to switch to Domain.
View 3 Replies View RelatedChange The Mac Address By Registry Editing In Windows?
Jul 25, 2012I found how to change the mac address by registry editing in windows for ethernet but can`t find a mac address for wlan... even in linux i m not able to change mac address for wlan using macchanger?
View 2 Replies View RelatedSpeed Up Internet Connection Through Registry?
Jun 12, 2011how to speed up my internet connection through registry or any other easy way to increase speed?
View 1 Replies View RelatedCannot Access HKEY_LOCAL_MACHINE With Registry Remote?
Apr 17, 2012I want to use registry remote to edit registry of another computer in my network,But I can't access HKEY_LOCAL_MACHINE(It's say I have no permission ) I use administrator (built_in) user,But i can't change permission by registry
View 7 Replies View RelatedTweaking Registry For Faster Internet?
Nov 14, 2012Tweaking registry for faster internet?
View 9 Replies View RelatedCisco WAN :: C2600 Config Registry / Password Recovery?
Mar 24, 2012I am studying for the CCNA and have my own lab. Several months ago I setup the lab and hand things running well, and decided to put it all away for a while. Alas, now that I have brought it all out again, I don't remember the passwords I used and have since destroyed my documentation, so this is perfect practice at password recovery/config maintenance type of stuff.
I am working on a 2610XM. When I power on the router, I see all the information pasted below. I have tried the password recovery processes described in the cisco knowledge base where we use the rommon prompt to load 0x2142, reset, then enable secret <password> and followed the remainder of the instructions, but when I reload the router after the process, the new password I've set still does not work.
Some things that are not consistent from the documentation that I am seeing are the messages Slot is empty and WIC is empty.
I am wondering if my router does not use 0x2102 for it's load, but it will not show what it is using and I can't run show version because of the password. I am connecting through the console port and using putty to access and configure. Below is a paste of the startup messages after the router decompresses it's image.
Processor board ID JAD070709N9 (1997350087)
M860 processor: part number 5, mask 2
Bridging software.
[Code].....
Cisco Routers :: Unable To Get Registry Key For Protectlink In RVS4000
Aug 11, 2011Just a few weeks ago I purchased a rvs4000 router. On that small business device is a product called protectlink. To get an activation key, you need a registration key first. That is normal in the package. However, my wify like to cleanup up and throws stuff away that she should not do. So, I lost the registration key.
It is impossible to key a new registration key. The webstore does not have them. They are in the package and will not open an other one. Cisco (if you can get passed the ...you don't have a support contract...go away statement) does not even know that they have this product. Registration keys, never heard of it. But you get the normal ... go to the webstore or trendmicro.... And that after the statement, we don't know that product. How do you know that this is a trenmicro piece of software.....
getting a registration key for a cisco small business router rvs4000 to obtain an activation code for the cisco/trensmicro protectlink product.
Windows 7 Laptop With Atheros AR9285 Network Card Can't Connect To Wireless Network?
Aug 21, 2012This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View RelatedWireless Network Of Windows 7 And XP?
Jun 5, 2011I am trying to wirelessly network two computers. The main computer is running Windows 7; that's the computer which runs the show. The second computer is running XP. I tried to install the LLTD Download from Microsoft on the XP computer and it gives me an message telling me that "Setup has detected that the Service Pack version of this system is newer than the update you are applying. There is no need to install this update". I also pinged the computers and they pinged but I still cannot get them successfully networked. What else should I try??
View 1 Replies View RelatedWireless :: Set Up Windows 7 Network Without HomeGroup?
Apr 12, 2012How do I set up a Windows 7 network to wirelessly share printer without using HomeGroup?
View 2 Replies View RelatedCannot Connect To Wireless Network (Windows 7)
Oct 27, 2012Do mind that it has been able to connect in the past. My wireless network card (Atheros AR5B93) will detect my wireless network, but after trying to connect to it, it'll come up with a Windows can not connect error. I'm kinda lost here since in the past it's been able to connect without a problem. I know that this isn't all to much information to go off of
View 14 Replies View RelatedWindows 7 Won't Connect To Wireless Network
Jan 27, 2011just got an hp g62 laptop but after connecting the first time time to my wireless network all i get now is "windows was unable to connect to virgin". i know that the wireless network is functioning correctly because i can connect to it via blackberry or iphone. i have been on the phone to the isp for hours changing settings and removing and replacing the network connection without any success. i have also reset the router (netgear wgr614v7) but nothing seems to work.
View 13 Replies View RelatedIP Conflicts On Wireless Network Using Windows 7?
Mar 23, 2011I'm on the road traveling and am having trouble with receiving an ip conflict error message shortly after connecting my windows 7 laptop to this particular hotels wireless network. Shortly after connecting to the correct access point is when the msg appears. I've checked my wireless adapters IPv4 TCPIP properties and ensured Use DHCP is enabled and that IPv6 is disabled. I've done a release and renew on the address after connecting as well (ipconfig /release and renew)to still no avail. Oddly enough, my internet connection works great in the morning at this hotel but has this problem at night time. Are there any known issues with 7 or such a thing as a Windows 7 "unfriendly" wireless router? I don't have this problem at home on my Linksys wireless router. Works fine.
View 1 Replies View RelatedUse Windows To Configure Wireless Network?
Jan 6, 2012I can not find the option "Use windows to configure wireless network."
This is what I have done so far:
Control Panel> Network and Internet Connection> Network Connections> Right-click Wireless Network Connection> Properties and a window with two headings opens: General and Advance. There is no "Use windows to configure wireless network" option.
Windows 7 Can't Find Wireless Network?
Jul 25, 2012my computer has been playing up the last couple of weeks not finding my network, even though ive had it about a year now without any trouble before. my laptop and iphone still pick up the wifi with no problems.i decided to format the computer as i wanted to do a clean install anyway, which has not made any difference. i have even tried bringing the desktop downstairs now and placed it directly next the the router to see if it would pick it up then, which it hasnt.
i have used an edimax wireless usb receiver ever since the computer was new which worked fine up until now, i also purchased a wireless pci card to see if that worked (wasnt sure if my my edimax usb had broken), which still doesnt work. the drivers for both the pci card and the usb receiver are up to date.i have tried logging into the routers firmware and changed the channel from 'auto' to channels 1-12. with no luck. i have now had to plug my computer into the router via the ethernet port to get the internet working.
i also run ubuntu on a dual boot, which for some reason also doesn't pick up the wireless network. (however my laptop runs ubuntu and does pick up the wifi)
Windows 7 Can't Identify Wireless Network
Nov 16, 2011I use windows7. Previously i had a normal internet connection (i use wireless) and few days ago my computer cant identify my network. It shows that im connected but it cant identyfy.
View 1 Replies View RelatedCan't Find Wireless Network On Windows 7
Jun 15, 2012I have a dell, running windows 7. I can see and connect to other networks, just not my work network. I can see my work network and connect to it from other devices. However I can't see it on the dell and I can't manually connect to it.
View 3 Replies View RelatedWindows 7 - Wireless Network Disappeared
Feb 12, 2013I have Windows 7. I was using my wireless network fine but all of a sudden it disappeared. I don't even see it in the list of available wireless networks, even though other networks are showing. I have to use the ethernet cable to connect to internet.
View 3 Replies View RelatedWindows Cannot Connect To Wireless Network
Feb 22, 2012I just recently had to do a clean install of my operating system. I have Windows XP SP3, currently updated. Before the clean install I could properly use the wireless internet connection from the linksys wireless network. I can currently connect to the internet via broadband when connecting it to the router in my house. However my pc, recognizes the wireless network linksys but it cannot connect to the network.
[code]....
Windows 7 Is Not Recognizing Any Wireless Network
Jul 28, 2011my win7 is not recognizing any wireless network
View 1 Replies View RelatedConnecting To Wireless Network Windows CE
Dec 31, 2012How to connect a windows CE notepad on a wireless broadband?
View 1 Replies View RelatedWindows Cannot Use Wireless Network Adapters
Feb 25, 2013I have a weird issue with my daughter's laptop. It will connect to the wired network, and give internet access, but it won't allow any connections via a wireless network adaptor.The laptop is on Windows 7 Home Premium 64 bit.In device manager it says the wireless adaptor is working properly. The drivers are the latest. Down in the notification area it says "not connected - no connections are available". She has a wifi switch (Fn+F3) on the laptop, but switching it makes no difference. I have an old desktop pc that connects via a USB wifi dongle, so I plugged the dongle into the laptop. It installed without problems, but in the notification area it says the same thing, "not connected - no connections available" So now I'm thinking, "what sits between the network adaptors and Windows? How come it will connect on wired, but not wireless?"
This all started when I updated her Atheros wifi driver. From that moment on it wouldn't connect using wifi. I thought I had somehow physically broken the wifi adaptor hardware, so I bought a new one (a Killer n1202), but installing it made no difference. It's as though I have somehow altered the way that Windows communicates with any wireless adaptor.When I go to the command line and type "ipconfig /all", there is no entry for "wireless LAN adaptor wireless network connection", as there is on my other laptop.
Windows 7 Can't Find Wireless Network
May 31, 2011I have Windows 7 and suddenly my home router isn't showing up on my list of networks.
View 1 Replies View RelatedWindows 7 No Internet Access On Wireless Network
Feb 29, 2012my primary source of internet at my house for the passed year is an at&t 3g usb modem (sierra wireless lightning), becuase i live in the middle of nowhere (only other option is satellite). Up until now i've been using a wireless ad hoc network to share the connection with multiple computers. I just purchased a cradlepoint router that is compatible with my usb modem so I can have a "real" wireless network in my house. I set it up yesterday and so far its working great, I have a wii streaming netflix, an android tablet, an iphone and two laptops (running vista, and win7 respectively) currently connected. The problem is my 3rd laptop, also win7. It is my primary computer that I use for business and absolutely essential that its connected to the internet. It (seems) to connect to the wireless network just fine, but gives me a "no internet access" error.
This laptop will connect to other wireless networks: it always connected to the ad-hoc, it will connect to my wifi at work and the network at my boyfriends house, also i just tried it with the verizon 3g mobile hotspot app on my droid and it connected right away. It also works just fine with a wired connection to this router (ethernet). I'm not sure where to start since every other device in my house is working with this network and this laptop will connect to other wireless networks.
ps/ Going through the windows onscreen troubleshooter it will either tell me "there is a problem with your broadband modem" or "There is a problem communicating with DNS server" (but it wont fix it)... and after going through endless google searches, i've done everything thats been suggested so far (making sure dhcp is enabled, powercycling the router/modem, updating drivers, ipconfig release/renew, disabling the firewall).
Windows 7 Wireless Network (Limited Access)
Jun 23, 2012My windows 7 desktop computer is giving me a "Limited Access" notice when i try to connect to my network. My laptop on the other hand can connect to it easily. I've tried several solutions that I found online, but nothing has worked yet. When I run command prompt ipconfig I get
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersJeffrey>ipconfig
Windows IP Configuration
C:UsersJeffrey>ipconfig /all
[code]...
Wireless :: Windows Xp Can't Find Network Printer
Feb 15, 2011i have 3 laptops, 2 are running vista and 1 with xp, the xp os will not recolonize the wireless network printer while the other 2 computers work fine. I cannot add a printer?
View 2 Replies View RelatedCannot Enable Wireless Network Connection In Windows 7
Jan 5, 2012I am working on a friends HP laptop that suddenly lost it's ability to see any networks at all. When I try to enable it in network and sharing it stays disabled. Just to be sure it wasn't hardware related I ran a ubuntu live cd and was able to connect with no problems. I tried updating the drivers,installing and reinstalling the network card with no luck. I also tried letting windows repair it but it says there may be driver problems.
Laptop-
HP G72 Notebook
Win 7 64bit
4 gig ram
Connecting IPad To Windows Wireless Network?
Dec 28, 2012When trying to connect my ipad to my windows wireless network it asks for a passwordIs this the same thing as my network key?
View 4 Replies View RelatedHook Up Printer To XP And Windows 7 Wireless Network
Sep 2, 2011I have a wireless network with an older model HP printer connected to an HP XP desktop computer. I also have an HP laptop running Windows 7. How can I get the printer to work on the laptop?
View 1 Replies View RelatedWindows 7 Shows Wireless Network But Can't Connect
Nov 6, 2012I recently build a Frankenstein desktop, or at least that's what I'm calling.I started out replacing the motherboard in a HP Pavillion p6130y desktop.After some research I found that the stock motherboard as pretty outdated so I decided to go aftermarket.I wanted to replace as little as possible but now the only original parts are the dvd drive and network card.The network card has to screws on the back to attach an antenna and is a PCI1x card.
I now have a problem where after installing the card and Windows 7 Professional , I can see the list of available wireless networks including my own.But, I cannot connect to any of them even though my own network has full signal strength.
Limited Access For Wireless Network On Windows 7?
Jun 17, 2011From one day to another my internet stopped working, instead of connecting automatically it shows limited access. I tried typing in cmd and IPCONFIG/ALL but that doesnt work either. using non-technical language, I am really bad with computers.
View 2 Replies View RelatedWindows 7 Computer Will Not Connect To Wireless Network?
Feb 7, 2013I changed my ISP to "Clear.com" and now one, seldom used, Win7 computer will not connect to the wireless network. I have two other desktops hardwired and two laptops on the wireless that work fine. The two laptops are in the same room as the Clear 'modem/router', while the Win7 box is not, if that matters. The Win7 box worked in that location when I was on the cable and had a separate wireless router.The box that will not connect, does show that the wireless connection is availableand the adapter shows to be working properly in Device Manager.
View 3 Replies View Related