Wifi Network Setup For 200 Users

Jan 2, 2013

I want to setup a wifi network in my office that can support 200+ users at a time. I'm trying to but I have very limited knowledge about networking. We currently have 2 5MBPS internet leased lines. The total office area is around 2000sq ft, all open, separated by glass walls only. I'm thinking about buying a powerful load balancing router and a switch, then connected 4-6 wireless router to this switch and give single wireless SSIDs to all routers. I want to keep one single network for all the users. Is this the right way to do?

View 7 Replies


ADVERTISEMENT

D-link Dir-615 :: Setup Wifi Users With Limited Time Connection

Dec 29, 2011

I have DIR-615 Cx (bought in Taiwan) Hardware C2 ver. I reflashed with DIR-615 firmware from Singapore to get English interface. I connect to a internet through another router on which I setup D-Link on DMZ with port forwarding.  Router works fine, I have internet connection.  So the question is: I have small cafe and want to offer customers WiFi connection.  I want to setup a time limit and allow them to browse only internet not internal network. (When I connect laptop to D-Link Wifi I can see my NAS on different subnet connected to cable modem/router) And if its possible to limit bandwidth.  Can I do it with DIR-615 and how to configure such a setup?

View 1 Replies View Related

Setup A Network With 30 Users Mostly Using Windows?

Oct 6, 2011

I'm looking to setup a network with 30 users mostly using windows. Would you recommend me getting a router and then a switch to hoook up all those LAN connections ?

View 4 Replies View Related

Office Wireless Network Setup - 50 Users?

Nov 1, 2012

I presently have a fiber internet connection to my office with about 40 wireless users on a single AP. The connection keeps dropping. Probably due to too many users on a single AP?

1. My question is similar to aniketchitale's, can get another wireless router, create a different SSID (eg. router1 and router2), but both wireless routers still connected to the same fiber connection. In other words, I would like to segregate the first 20 users to router 1 and the next 20 users to router 2.

2. By having 2 wireless routers each with their unique SSID, will all the users still be able to access to the same printer in the office?

View 12 Replies View Related

Setup Of 20 Users Small Network Description?

Mar 10, 2013

How to setup a 20 -30 computer network.

Requirement:
- All systems can be accessed from network and should be connected.
- Data storage in a centralized device and accessible from all device.
- Should be connected to internet.

View 1 Replies View Related

Setup Of 20 Users Small Network Description

Mar 21, 2012

setup of 20 users small network description

View 1 Replies View Related

Possible To Setup Powerline And Wifi Network?

Nov 29, 2011

I have a duplex home in an urban setting that seems too vast for a single wifi router. Additionally, it seems that there is significant speed degradation through wifi. According to my speed tests, I can lose up to 70% of my contracted internet speeds (of 15 mbps) via the router (which I am hoping that the Apple TC can fix although I'm sure that sometimes it's the cable co's fault!)I have read that if I can add a wifi router to the second floor that would work with the signal, however that speed would be the same degraded one.So, I have been doing lots of reading on the Powerline devices and I'd like to know if I can do the following and if so, how:

1. Connect the wifi router (soon to be an Apple TC) to the cable modem, as I do now, but then run the ethernet cable through the TC to the Powerline and Powerline network that way.

2. Connect my iMac to the internet via Powerline

2a. Can I then use Powerline fo Home Sharing, Air Play, and so on?

2b. Back up my iMac to TC?

3. Connect my internet ready TV via Powerline (currently conencted via wifi).

4. Connect a second wifi router on the second floor via Powerline and it be on the same wifi network as if I am using the second router as an extender.

5. There is a tenant on the 3rd floor who receives a separate electric bill. Can I assume that they would be shut out of my Powerlined network?

6. Lastly, connect my iOS devices to wifi?

View 2 Replies View Related

Setup A Proxy Server For Wifi Network?

Feb 6, 2012

I have a wireless router and own net work at my office I would like to be able to set up a proxy server in order to prevent certain users from reaching specific sites.

View 1 Replies View Related

Setup A Home Wifi Network With Windows 7?

Jan 8, 2012

how to setup a home wifi network with windows 7?I want to access internet of the main laptop (has internet using a dongle)for my other laptop which has no direct internet connection at the moment, but wifi enable.

View 2 Replies View Related

Dir-615 Dlink Router - How To Setup Wifi Home Network

Oct 13, 2011

I have a dir-615 D-link router. It is well installed with my main computer that is an old XP windows system. I tried to create a network to give acces to my friend laptop when he comes home(he has a mac). I setuped a network with a name and a password. So my friend could find the network name and i gave him the password, but it never works. Another friend of mine also came with an older iBook laptop and the same thing happens.

View 5 Replies View Related

How To Setup Wifi Network In Large Campus Building

Apr 26, 2011

How to setup a WIFI Network in a large campus building.

View 5 Replies View Related

Setup A Wired Network Between Computers But Leave The Wifi On Them?

May 5, 2011

I'm sort of new to networks so I'm not sure if this is even possible but what I'm trying to do is set up a wired network between computers but leave the wifi on the computer as how it connects to the internet. I'm using two computers connected through a lynksys router(not connected to the internet) and ethernet cable, and one of the computers has a wireless card that connects to another router that is connected to the internet. i can set up a network between the two computers but then the one can't connect to the internet(even though it says it is connected the network with internet),

View 2 Replies View Related

Home Network :: Wifi Internet And Wlan Setup With Printer?

Sep 18, 2012

I'm newbie in Networking. I want to establish a small WLAN network where all the laptops (6 laptops) can use WiFi Internet and also can print via a network printer.I have these hardwares:1: DSL Modem2: A Belkin F5D8233-4 300 Mbps router3: A Network printer (with RJ45 ethernet port, Not wireless printer)4: LAN Cable (if needed)5: Finally 6 Client Laptops

View 4 Replies View Related

Home Network :: How To Setup Same Wifi Ssid Over Large Area

Jul 2, 2011

I'm trying to setup my wifi at home and want to cover all the areas under same SSID and allow roaming cross since one router can not cover 20000 sq ft over 3-4 levels.I anticipate at least 8 if not more to cover everywhere.How do I setup a WLAN network for myself. I have a cat6 cable running in quite a few rooms.Basically my end game is have uninterrupted wifi access everywhere in the house Possibly run a SIP based PBX over wifi wherever possible, close to 24 extensions.I also laid down cat6 in most rooms to allow to setup my own central media server with that as well but that's a different topic and forum I guess.Can I use the cat6 coming into the rooms, connect it to the wifi router and provide Internet access over wifi and use the router as a hub to connect a cat6 from the router for the media player and another one to a sip based Pbx extension or have the Pbx extension be on wifi?Damn sorry for such a confusing and loaded sentence.

View 18 Replies View Related

How To Setup Home Server And Restricting Users

Feb 20, 2013

I am a networking student so have access to a free copy of Windows Server 2012. I want to setup and get experience with AD, DHCP, and DNS, among other services. Right now I have a Netgear router attached to a Cisco switch. (studying for CCENT cert) I have my desktop and server plugged into switch. I want my desktop to connect to the domain for testing and messing aroudn with. My wife has a netboook, smartphone, and wireless ipod. I'd like her 3 devices to get an IP from the DHCP server without having her authenticate to the server. Will the Netgear router allow this since wirless access is on? Or will she need to authenticate with the server to get a DHCP IP? I am gonig to disable the router's DHCP service.

View 3 Replies View Related

Cisco AAA/Identity/Nac :: Setup ACS 5.2 With An ASA V8.3.2 To Lock Users Into VPN Groups?

Jan 18, 2011

I'm trying to setup ACS 5.2 with an ASA v8.3.2 to lock users into VPN groups based on a users AD group.  I've tried various combinations but the group lock isn't working.  I've done steps 1 & 2 ...
 
1) Network Devices and AAA Clients -> Define VPN

2) Users and Identity Stores -> Setup AD and Directory Groups, test connection
  
Policy Elements:
 
Q1) Policy Elements - Do I need an authorization profile for each group:

Q2) What RADIUS attributes should I use to match my ASA tunnel-groups?
 
RADIUS-IETF attribute 25?RADIUS-Cisco VPN 3000/ASA/PIX 7.x 85 (Tunnel-Group-Lock)?Other?
 
Access Policies:
 
Q1) Do I need to enable and use group mapping?

Q2) Do I need a Network Access Authorization Policy for each group?

View 8 Replies View Related

Cisco Routers :: RV180 - Setup VPN To Allow Users Accessing Via IOS Devices?

Mar 29, 2013

I want to setup a simple VPN to allow users to access the office via the iOS (iPad/iPhone) devices.  I assume I do this through:
 
VPN>IPsec>Basic VPN Setup
 
BUT, what do I enter for the "Endpoint Information" and "Secure Connection Remote Accessibility"?

View 1 Replies View Related

Cisco Routers :: RV220W Rebooting Daily / Setup With SSL VPN Users

Dec 3, 2012

I have a RV220W setup with SSL VPN users, authenticating to an internal Active Directory. Maybe 5 ports forwarded and 8 external IP addresses. Besides this i have 1 data VLAN and a voice vlan on my network.
 
The reboots are on different times on a day, even on Sundays at 7 AM when noone is logged in to the network.FW is at 1.0.4.17.

View 1 Replies View Related

Cisco VPN :: 5520 - Setup Environment That Allows Users To Use Dameware To Connect

Feb 23, 2012

I have been tasked with attempting to setup an enviroment that allows users to VPN from home and use Dameware to connect, from home, to another machine in another users home that is VPN'd into the same network. Is this possible?
 
We are using 2 5520 ASA's and CiscoAnyConnect.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: 7000 Setup Switch To Be Able To Authenticate Users With Tacacs+

May 2, 2012

I have a cisco nexus 7000 switch and a cisco ACS 5.2. I would like to setup the switch to be able to authenticate users with tacacs+ using RSA secureid tokens when they try to logon to the switch.

View 1 Replies View Related

How To Remove Users From Wifi

Aug 5, 2011

I have a dynalink RTA 1025W ROUTER AND WANT TO REMOVE USERS THAT NO LONGER LIVE WITH ME FROM MY WIFI NETWORK. COULD THEY POSSIBLY CAUSE A SLOW DOWN OR CONNECTIVITY

View 1 Replies View Related

Does Number Of Users On Wifi Affect Speed

May 16, 2012

Can i connect about 12 devices (laptops and mobile phones) to a 8 mbps or 16 mbps wifi router?

View 1 Replies View Related

Protocols / Routing :: How To Control Wifi Speed And Data Usage For Users With Java

Oct 30, 2012

How to control the speed and datausage for different users in wifi using java.

View 3 Replies View Related

QoS On 150 Users Network / How To Set It

Oct 19, 2012

i have 2 ISP, each ISP is 20Mbps internet speed.. and i connect this 2 ISP to mikrotik router,so this network will have 20Mbps + 20Mbps line and this network have 150 users..any idea how to set the QoS? i don't want the user using p2p application will use the Full bandwidth then affect the others user become slow browsing and i want reserve some bandwidth for some user for gaming.

View 3 Replies View Related

Way To Share Certain File To Some Network Users

Aug 27, 2012

I am using Compaq Presario CQ41. OS Windows 7. I am connected to other PCs via LAN. My computer name is "Compaq" and the ones that I connected to are named "NEXT" and "TESTING". I am able to access data to "NEXT", "TESTING" and vice versa which means that the LAN is working. I want to share a certain file to "NEXT" but I want that file not to be shared by "TESTING".

View 10 Replies View Related

Sharing :: How To Boot Users Off The Network

Oct 24, 2012

I would like to know how i can boot other users off of the wifi network temporarily. How can i do this? Ive tried adding their mac address to the router admin, not sure if ive done it correct though, its a dlink login.Failing that is there any programs that can do this?? Ive come across one called wifijam but its only available for mac.

View 1 Replies View Related

Building A Wireless Network For 130+ Users?

Apr 8, 2011

designing a wireless network for an apartment complex. The complex is shaped like like an rectangle, fairly small, maybe 100 feet on the ends and 300 feet long on the sides. There are 130 people that we are assuming may have about 3 devices each that they will connect to the wireless network, potentially simultaneously, as this is in a college environment. We have plenty of bandwidth and down/up speed. We are running 30 megabit down and 10 up. I am planning on having a router with two access points centrally located in an apartment and extending the network out with antennas in each direction from the access points with Omni directional antennas. The Access points that I am planning on using are Cisco WAP200 with maybe a Linksys router, as the router should not have more than 10 connections on it. I need something that will not crash after 10-15 users connect to it because it jams up from overload.

View 3 Replies View Related

How To Setup New Wifi

Oct 20, 2011

Can i set up a new wi-fi?

View 1 Replies View Related

Using Bandwidth Of Multiple Users On A Proxy Network?

Jan 22, 2011

My college hostel has a broadband connection in each room, with individual servers, all of which are connected to a central server.Each hostel has a unique ip range(eg 10.3.14.1-10.3.14.255, and others like this, and students are allotted random ips). Each hostel has a particular proxy address that allows us to access the internand by low i mean, quite lowet, and each user has a fixed bandwidth(which is low). My question is, is there a way for one user of a particular hostel to use the bandwidth of multiple users of the same hostel(such that they are in the same ip range, and have the same proxy server for accessing the internet).i.e Is there a way for me to increase my bandwidth by using the bandwidths of other non allocated ips within the range of my hostel, such that with a single broadband connection, i can utilize the the unallocated bandwidth.

View 1 Replies View Related

How To Stop Unknown Workgroup Users On Network

Feb 13, 2011

How I can stop the unknown workgroup user on my network?

View 1 Replies View Related

Network Connection Timeout For Some Users In Windows 7?

Jul 6, 2011

I have a network set up with file sharing. I use a Windows 7 PC to host files that are shared with around 8 other PCs - some on Windows 7, some on Windows XP. The file sharing works but sometimes some users are unable to get access to the files. The error message is something like PCNAME is not accessible...

View 2 Replies View Related

How To Get Recognize Wifi Setup

Oct 18, 2012

I have a toshiba satellite p25-s520 and running windows xp sp3 and I cant figure out how to get it to recognize a wifi setup?? I called toshiba and went through explaining and she said it was a configuration issue and she was going to put me through to her tech so he could fix this remotely and last minute she said i had to purchase a warranty, i said ill figure it out on my own,

View 5 Replies View Related

Wireless :: Network Log Off Current Users When New Clients Logs In?

Feb 19, 2012

Whenever new clients logs on to the network, the network tends to kick out users already logged on to the network.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved