Windows Xp - Command Prompt Appears And Disappears?

May 19, 2012

Windows XP sp3 home edition.On login in when the PC open the desk top the icon opens and a command prompt flash and desappears

View 1 Replies


ADVERTISEMENT

Wireless :: PS3 MAC Address Through Command Prompt On PC?

May 30, 2011

My PS3 recently got stolen. I was informed that the detective assigned to my case can contact Sony with the serial# and MAC address to track it down.I realize that there is this way:" If all you have is the serial number SCEA would need the MAC address, and only SCEJ has the "master list" of serial number to MAC address comparison. All SCEA would need from your local PD is an affidavit request / warrant (whatever their specific agency prefers to use or call them) asking SCEA to acquire said information."However, I also realize that I can find my MAC address through command prompt on my windows. However, there are more than one MAC addresses (or physical address as referred on the command prompt). My Question is, how do I know which one is the same as my PS3 MAC address?
There are these choices:

Wireless LAN adapter Wireless Network Connection 2:
Wireless LAN adapter Wireless Network Connection 2:
Ethernet adapter Local Area connection
Ethernet adapter Bluetooth Network Connection

View 2 Replies View Related

How To Send A File Using Lan / Command Prompt

Aug 17, 2012

how to send a file using command prompt ?

View 1 Replies View Related

Send A File Using LAN / Command Prompt?

Jul 21, 2012

i there any way to send tje file using command prompt option for sending a file if we have the ip address of the person to whime we want to sand the file

View 1 Replies View Related

Command Prompt To Show Devices On Network?

Jan 30, 2013

I am running windows 7 HP. We have about 10 devices in one office and 5 devices connected thru a VPN..... When i hooked everything up 4 weeks ago I could see all the devices in the main office and the remote office connected thru the VPN (In the Network Folder that lists everything connected). Now I only see like 4 device and they are all in the main office.

I did some research a couple weeks ago and found a command prompt that "refreshed" all the devices that were connected, but now They are gone again and I cannot remember the command prompt!

View 1 Replies View Related

Find Wifi Password Through Lan Or Command Prompt?

Dec 4, 2012

How to find the password through lan or cmd

View 2 Replies View Related

Broadcast A Message On Network Using Command Prompt?

Aug 10, 2011

how do i broadcast a message on my network using command prompt?

View 2 Replies View Related

Cisco Wireless :: Getting Command Prompt On AP 3502i?

Jul 16, 2012

I have AP  which is not connected to switch.I console it and it gives error unable to to get  IP from WLC.Need to know is there any way that i can go to command prompt of this AP without getting IP from WLC? I tried control + c etc it does not go to command prompt.

View 8 Replies View Related

IP Address Displays A Question Mark On The Command Prompt

Mar 15, 2011

When I went to the cmd prompt and typed in ipconfig/all I got...

Ethernet adapeter Wireless Newtork Connection 4:
Description- Dell Wireless Mini Card
Physical Address-00-1E-4C-05-99-B3

[Code].....

View 1 Replies View Related

Command Prompt Suddenly Appeared Copying Files?

Nov 18, 2012

I was using my laptop - working in MS Word and hadn't even opend a internet browser and suddently a command prompt appears and all i managed to see before closing it from the task manager (which had it running through internet explorer i think) was that it was copying files.Its a work laptop so i would like to know if it was remote access from IT which seems doubtful on a Sunday or if i need to be concerned about security. Is there a relatively easy (considering i have zero programming experience) way for me to check if anyone logged on with remote access and who and what files were copied?

View 2 Replies View Related

Linksys Cable / DSL :: Upload HTM File To WAG200G Using Command Prompt?

Feb 9, 2011

is it possible to upload a htm file to the router using a command prompt? the page is located at [URL] I want to change the option of Allow All to Restrict Access at 8pm every night?

View 3 Replies View Related

Windows XP SP3 - Wireless On Desktop Disappears

Apr 16, 2011

I have a Windows XP SP3.I bought this machine used not too long ago, it came with a legit fresh install of XP and all the drivers. And it's been running in great shape until this. I'll retrace my steps as best I can.I was on the internet and my connection was still connected (Completely, not limited) but my browser wouldn't surf. I naturally restarted my router, nothing changed. So I restarted my computer. When it came back on the Wireless didn't boot up like it used to. I checked my internet, it was fine. My laptop was running fine on it.Now as I try to figure out whats wrong, my "Wireless Network Connection" is gone completely from my computer. AND the Wireless isn't on my device manager anymore?? I installed another USB wireless stick (which I used on my old desktop) and it's working ok but I feel like my connection used to be so much better which the ASUS wifi instead. I un-installed the driver, and re-installed. [code]

View 10 Replies View Related

Windows 7 Appears To Be In Safe Mode?

May 26, 2011

For some reason when I switched on this evening wireless won't work and the screen appears to be in safe mode. I can connect using the cable but wireless seems to gone.

View 1 Replies View Related

I7-2700K Network Adapter Disappears From Device Manager In Windows 7

Apr 30, 2012

I have an i7-2700K system with MSI Z68A-GD80 MB running on Window 7. Awesome system. Only one issue. The Network Adapter section keeps disappearing from Device Manager, causing my ethernet to fail, no lights on either of the RJ45 ports with cable plugged in. All of the latest drivers are installed. I've Googled it and see others with the same problem and have followed the "temporary" solution - shut down the system, unplug it from the power supply, yank the memory out, press the power button with PSU unplugged to "bleed" the caps (or use the pwr/reset button on the MB before shutting it down), let it sit for several minutes (it takes mine at least an hour, so I'm thinking the system needs to be completely cooled down) and then put it all back together and turn it on. Network Adapter section shows up again, Ethernet lights return, internet works again.

This works until the next time the system shuts down and then I have to do this all over again. Extremely annoying problem. I'm not sure if it's a faulty MB or if there's an actual permanent fix.

View 2 Replies View Related

Servers :: Configuring Windows 2008 Server To Get Password Prompt

Jan 12, 2011

How do configure win2008 server to bring up a password prompt box when access via a workgroup pc on lan.

View 1 Replies View Related

Broadband :: Windows 7 No DOS Command To Fix Network?

Feb 27, 2011

windows 7 won''t go into DOS commands and having problems with network. Often does not get a Local Area Connection, no IP Config, DNS Server Config not responding

View 2 Replies View Related

2 NIC Cards With Windows XP3 Using Route Command?

Jun 9, 2011

1 computer (Computer A) has 2 NIC cards. 1 NIC card is on the LAN which connects out to the internet.1 NIC card is connected to another computer (Computer B) via crossover cable.

Assume Computer A NIC #1 IP:
1.1.1.2
Assume Computer A NIC #2 IP:
1.1.1.3

[code]...

Computer A and B can ping each other on their connected NICs. But Computer B cannot ping Computer A's network/LAN facing NIC card.Also Computer B cannot connect to the network. I cannot use Microsoft ICS due to company policy. I think I can use the route command and have a persistent route that would allow computer B to connect to the company's network. Also the bridge command also seems disabled (even when I select both connections at once).How should I configure the route command? Should I have a default route?I assume from Computer B the default route would something like this:route add 0.0.0.0 mask 0.0.0.0 1.1.1.3Does the network connection from Computer A to B need a default gateway?Are there any extra commands aside from the default route which would allow full connectivity? I'm trying now just to be able ping Computer A interface #1 to/from Computer B. But no luck. I want to statically configure Computer B with the same DNS settings, and bring it up on the domain.

View 14 Replies View Related

Route Add Command In Windows 7 Professional?

Aug 20, 2012

Each time I try to add a new route(route add 172.24.0.0 mask 255.255.0.0 172.21.0.4). I get the following error message: The requested operation requires elevation.

View 1 Replies View Related

Wireless :: Linux Command Iwconfig For Windows XP?

Apr 26, 2011

Hoy-hoyIs there exist any tool like iwconfig (linux tool, I think), but working in windows XP?civ-civ

View 3 Replies View Related

Uploading FTP / Slow Speeds Via Windows Command

Nov 7, 2011

First this is my setup, i have a 100x100 mb fiber pipe at a location i am working at. i am comming out of a cisco fiber router to ethernet. i am coming straight from the fiber switch to the computer at a 1gb connection. So my problem is when i try to upload to my ftp server via windows explorer i can never get about 1.5mb, but if i upload via command prompt it goes at about 60mb upload, so the pipe is good. So you say why dont you just use the command prompt, well i have specialized gear here that run xp emmbedded and it does this via the windows explorer. I have tried 4 other computers and they all do the same thing. I tried a UDP video stream and worked at over 10mb stream. but all the ftp uploads cap out at 1.5mb.

View 3 Replies View Related

Dell Inspiron 4010 With Windows 7 Ultimate - Run Command To Switch On Bluetooth

Aug 26, 2011

I am using Dell Inspiron 4010 with Win7 Ultimate installed in it. what is run command to switch on the bluetooth?

View 1 Replies View Related

LAN Disappears When Using Docking Station

Aug 19, 2012

I'm using an HP Elitebook 6930p with Windows XP and an HP EN488UT docking station. When I use the computer by itself the Network Connections shows "Local Area Connection 3 Connected Intel 83567LM Gigabit Network Connection" and I can connect to the internet. When I am in the docking station, I can also see this connection, as long as my notebok is open when I start up. However, if i start the computer with the lid closed (I just want to use the external monitor, not the notebook monitor) that network connection does not appear and I cannot connect to the intenet.

[code]....

View 5 Replies View Related

Wireless Network Disappears Overnight?

Mar 24, 2012

I have a pretty old Linksys WRT160Nv3. I tried support from them but I was told my router is too old to receive free support. My router is connected to a comcast modem (Motorola).

Two days ago I tried to connect to the internet with my iPod and had no luck, the same went for my phone and my roommate's laptop. When I went on to the computer with with the router I was it was connected to Network 4 our local network and couldn't find any other networks. Our router came with 'Network Magic' so I opened that to see if our existing network showed up there, but only it's settings were there...it's like the computer tried to erase our network. I reset the router and re-made the network and this solved the problem for the day and most of yesterday.

Yesterday evening, I came home to the same problem. I did the same thing I ddi the first time, but instead of reseting the router before I did anything I skipped to re-installing it. I'm here because this happened again this morning, and before I go and set up the network again, I'd like to know what I'm doing wrong and what I should do. I even got a new anti-virus because I was afraid there might be a virus on the the computer making it act weird but I haven't been able to complete a full scan yet.

View 3 Replies View Related

Mapped Drive Disappears After Reboot?

Feb 9, 2011

We are running about 75 computers in a network. We have a server here where all the clients have a shared folder that we map for them, but as soon as they restart their laptop, the map drive disappears. We are running a script that we tested on a network where the laptops were linked with a cable, but as soon as you switch over to wireless it disappears.

View 1 Replies View Related

ASUSTeK- Wireless On Desktop Disappears

Apr 13, 2011

I have a Windows XP SP3. My motherboard is this one. ASUSTeK Computer Inc.I bought this machine used not too long ago, and it's been running in great shape until this. I'll retrace my steps as best I can. I was on the internet and my connection was still connected (Completely, not limited) but my browser wouldn't surf. I naturally restarted my router, nothing changed. So I restarted my computer. When it came back on the Wireless didn't boot up like it used to. I checked ) and it's working ok but I feel like my connection used to be so much better which the ASUS wifi instead.

View 2 Replies View Related

Cisco Routers :: RV220W Just Disappears

Jun 23, 2012

Having a strange problem that just started this week and got worse this evening. I have a RV220W that is feeding my network. The RV220W sits behind a broadband modem and acts as the DHCP for the network and those computers access the internet that way. Anyway, tonight started an issue where the the RV220W just disappears. Becomes unpingable. I recycle power, and within anywhere from 5 to 10 minutes, it's gone. No longer pingable.  Even if I plug a latop directly into it.If I power cycle the RV220W it comes back and I can ping it and access it and its settings. 5 to 10 mins later, I again lose it. Nothing was done. Its been working fine for a few weeks. Had a similar outage last Tuesday, but a recycle of everything brought everything back into line. After I lose connection to it, the lights I expect to be lit remain lit.

View 1 Replies View Related

Computer Loses Connection And Network Disappears?

Jun 24, 2011

I'm currently using a Lenovo V360 and my issue is that my computer, which connects via wi-fi, disconnects from the network randomly. The network will be completely removed from the list of available networks. The other networks available will still be visible. I tried turning off the wi-fi button on my laptop and turning it back on, but the list of available networks still does not include the network I was recently connected to. The only way to see the network on my Lenovo is to restart the computer. The connection works perfectly after I restart. It is definitely not the network's problem because I am still connected to the same network with my other laptop. If necessary, my laptop runs Windows 7, my router is a D-Link, and the encryption is WPA.

View 5 Replies View Related

Wireless Router Disappears From List Of Connections?

May 30, 2011

Every day or two my landlord's router just seems to disappear altogether . just seems to turn itself off randomly. Unplugging to reset results in good, clear signal for a while, but the problem always comes back. It affects all connected machines (not sure if it makes any difference if a macnine is connected via wire.)

View 4 Replies View Related

Network Disappears From Computer - Requires Restart?

Sep 29, 2011

I've been having this issue where my wireless network completely disappears from my computer and it requires a restart to fix.I know for a fact that it is not my modem/ISP as my iPad still connects just fine to the network.My network disappears about after 10-20 minutes of being logged on.

View 1 Replies View Related

Computer Disappears From School Network - Cannot Reconnect To Printer

Mar 10, 2013

win xp I work at a junior high school. A lot of the computers are part of a work group so they can share printers.

I'm having problems connecting to a printer. It has worked for a long time, it's still my default printer, but when I try to access it, it gives me a spooling error.

Now here's why I think it's a network problem.I can't access the main computer's network location (the one hooked up directly to the printer). All the other computers come up on the networkjust fine. And the one in question is only able to access very few computers in the network browser. let me simplify:

computer A/ brother printershared computer B/no longer sees A on network A/ sees only a small portion of other computers on network B/ sees all computers but A

Again, I don't think it's a spooler problem. It probably gives that error because it's a default printer with a lost connection.

View 10 Replies View Related

Wireless Netgear SSID Disappears Daily At Same Time?

Dec 18, 2012

Every day around the same time the SSID for my wireless network disappears. I'm using a Netgear wnr2000v3. Prior to this I was using a Linksys router, which did the same thing... only more frequently (2-3 times a day).Between smartphones and laptops, there are about 6 devices connected to the network. They all lose their connection and cannot find the broadcasted SSID when this happens.Because it happens around the same time each day, it makes me think that it has something to do with the DHCP lease, which is 24 hours. Just a thought, as I don't really know how that works.

View 4 Replies View Related

Cisco Wireless :: 1552 Outdoor AP Disappears From WLC5508

Dec 30, 2012

My problem ist that i have 4 air-cap-1552e APs witch are powerde trugh Power Injectors. They worked fine for a few days but then the controller (7.2.111.3) lose connection to them. Right now i have only one Joined AP. The other 3 are status not joined. I can Ping all 4 Aps and wifi clients are connected through them.

View 8 Replies View Related

Computer Appears To Be Configured

Apr 7, 2012

I am running Win 7 32-bit for my OS. I am on a desktop PC. I have a Internet modem only without the router. I have a Motorola SurfBoard SB5101.When I go into the Network Connections and do a diagnose. I get the following message. I tried doing netsh int ip reset reset.txt, and restart my PC, but it doesn't fix the error.Your computer appears to be configured, but the device or resource (DNS Server) is not responding.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved