Wireless Netgear SSID Disappears Daily At Same Time?
Dec 18, 2012
Every day around the same time the SSID for my wireless network disappears. I'm using a Netgear wnr2000v3. Prior to this I was using a Linksys router, which did the same thing... only more frequently (2-3 times a day).Between smartphones and laptops, there are about 6 devices connected to the network. They all lose their connection and cannot find the broadcasted SSID when this happens.Because it happens around the same time each day, it makes me think that it has something to do with the DHCP lease, which is 24 hours. Just a thought, as I don't really know how that works.
View 4 Replies
ADVERTISEMENT
Jan 1, 2013
My 'main' Wifi SSID will just disappear and you can't connect to it. the guest account will still show up. computers/devices that are already connected will stay connected and will work fine, but anybody reconnecting will not be able to. Only solution I've found so far is to unplug and replug in my router
View 1 Replies
View Related
May 6, 2013
I'd like to set up a 2.4Ghz and a 5Ghz SSID at the same time, using one Cisco AP541N-E-K9. But I can't figure out any way to do so.
View 1 Replies
View Related
Mar 11, 2011
how to block a dynamic wireless IP address or the SSID of a wireless connection from accessing my router?
I have 2 people that have somehow managed to get access and i wish to discard them so they cannot reconnect. My wireless router is a Netgear WPN824 and i am running Windows XP.
View 3 Replies
View Related
Oct 22, 2011
I have to reconfigure the wifi connection everytime a new laptop comes into my house -- and we can only use one computer at a time with this router...huge problem with a big family..
View 1 Replies
View Related
Dec 23, 2012
what the ssid password is netgear 600
View 3 Replies
View Related
Apr 13, 2012
I have a Netgear N150 Wireless ADSL2+ Modem Router(DGN1000) which i need to connect for wireless access..My internet connection is a wireless one(antenna connected on roof) connection available to only one computer with an RJ45 LAN.Is it possible for me to connect the router to this LAN cable and get internet on more than one computer at a time?? I have the following information
IP :
Subnet :
Default Gateway :
Primary DNS :
Secondary DNS :
MAC of the Registered Computer :
View 2 Replies
View Related
Dec 30, 2012
N900, WNDR4500, works fine as long as broadcasting SSID on 2.4, but if broadcasting SSID is turned off neither of wireless computers (windows 7 & 8) will reconnect.
View 1 Replies
View Related
Jul 7, 2011
I have basically the following setup: It's a home network, running with a Netgear WNDR3700 wireless router.
Wireless Devices on the Network:
Google Nexus One: 802.11 b/g/n
iPhone (Original): 802.11 b/g
Main Workstation Laptop: 802.11 a/b/g
"Beater/Other" Laptop: 802.11g b/g
Ethernetted devices on the network:
Logitech Revue: CAT-5e
I'm running both the 2.4 GHz and the 5.0 GHz networks over the same SSID. The goal, obviously, is to get everything over to N if possible. I've heard that wireless N has much better signal and transfer rates, is this true? Also, is running the two different frequencies with the same SSID problematic? It's kind of strange, because my Nexus One is having a difficult time staying connected to the network in my office while the main workstation laptop in the same room is getting a much better signal.
[Code]....
What's interesting is that both are running on the 2.4 GHz networks, essentially both not on the wireless n network, which kind of defeats the whole purpose of things. Is it bad to run both the 2.4 and 5.0 GHz networks with the same SSID? If using a network repeater, is it bad to rebroadcast the original network with the same SSID as the source network? It seems that the 5.0 GHz network is getting "clobbered" by the 2.4 GHz network. Is it really necessary for me to broadcast using different SSIDs?
View 1 Replies
View Related
Mar 24, 2012
I have a pretty old Linksys WRT160Nv3. I tried support from them but I was told my router is too old to receive free support. My router is connected to a comcast modem (Motorola).
Two days ago I tried to connect to the internet with my iPod and had no luck, the same went for my phone and my roommate's laptop. When I went on to the computer with with the router I was it was connected to Network 4 our local network and couldn't find any other networks. Our router came with 'Network Magic' so I opened that to see if our existing network showed up there, but only it's settings were there...it's like the computer tried to erase our network. I reset the router and re-made the network and this solved the problem for the day and most of yesterday.
Yesterday evening, I came home to the same problem. I did the same thing I ddi the first time, but instead of reseting the router before I did anything I skipped to re-installing it. I'm here because this happened again this morning, and before I go and set up the network again, I'd like to know what I'm doing wrong and what I should do. I even got a new anti-virus because I was afraid there might be a virus on the the computer making it act weird but I haven't been able to complete a full scan yet.
View 3 Replies
View Related
Apr 16, 2011
I have a Windows XP SP3.I bought this machine used not too long ago, it came with a legit fresh install of XP and all the drivers. And it's been running in great shape until this. I'll retrace my steps as best I can.I was on the internet and my connection was still connected (Completely, not limited) but my browser wouldn't surf. I naturally restarted my router, nothing changed. So I restarted my computer. When it came back on the Wireless didn't boot up like it used to. I checked my internet, it was fine. My laptop was running fine on it.Now as I try to figure out whats wrong, my "Wireless Network Connection" is gone completely from my computer. AND the Wireless isn't on my device manager anymore?? I installed another USB wireless stick (which I used on my old desktop) and it's working ok but I feel like my connection used to be so much better which the ASUS wifi instead. I un-installed the driver, and re-installed. [code]
View 10 Replies
View Related
Apr 13, 2011
I have a Windows XP SP3. My motherboard is this one. ASUSTeK Computer Inc.I bought this machine used not too long ago, and it's been running in great shape until this. I'll retrace my steps as best I can. I was on the internet and my connection was still connected (Completely, not limited) but my browser wouldn't surf. I naturally restarted my router, nothing changed. So I restarted my computer. When it came back on the Wireless didn't boot up like it used to. I checked ) and it's working ok but I feel like my connection used to be so much better which the ASUS wifi instead.
View 2 Replies
View Related
Jul 17, 2012
I have a new SRP 541W with v. 1.2.4 firmware.
Daily, (random times) I have to do a hard reset in order to get the wireless up and running. It works great and then with no warning, no other issues, the wireless just stops. The wired connections still work just fine.
Everything comes up perfectly fine after it reboots, until the next day when I have to reboot it again.
View 5 Replies
View Related
May 30, 2011
Every day or two my landlord's router just seems to disappear altogether . just seems to turn itself off randomly. Unplugging to reset results in good, clear signal for a while, but the problem always comes back. It affects all connected machines (not sure if it makes any difference if a macnine is connected via wire.)
View 4 Replies
View Related
Apr 27, 2013
I just bought a RV220W. One of the features I need to setup is a daily wireless plan, i.e. parental control: my wireless connection needs to be open at different times depending on the day, for 2 specific wireless devices, while others wireless devices have continuous access. Unfortunately, the wireless schedule only lets me set up one start/stop time only (i.e. the same one every day).
I noticed that I could possibly set up a firewall access rule with a specific schedule, but I have no idea if this would work, and how to set it up. My basic idea was then to open the wireless SSID I want to control from 7.30am to 11pm every day, and then add a firewall rule that would close the access to the said devices (using their MAC address) from say 10-11pm on given days... But I am not quite sure how to set this up.
View 2 Replies
View Related
Dec 30, 2012
My problem ist that i have 4 air-cap-1552e APs witch are powerde trugh Power Injectors. They worked fine for a few days but then the controller (7.2.111.3) lose connection to them. Right now i have only one Joined AP. The other 3 are status not joined. I can Ping all 4 Aps and wifi clients are connected through them.
View 8 Replies
View Related
May 15, 2012
My issue occurs on ALL of my home computers (MacBook and iMac using wi-fi) and ALL of my browsers (Safari, Firefox, Chrome).The problem:- Security Certificates: They pop up daily for Facebook mostly, but also Twitter. I will click Continue, which takes me to...- 404 Error/Page Not Found Error: After the Certificate error mentioned above, this happens. Mostly to YouTube. It will stay like this for a few hours. I've cleared cache, rebooted, etc. etc. Nothing works.- Images turn into little blue boxes with a question mark in them. **When this happens, it's an indication that a Certificate box will pop up out of the blue.- Even on Google.com, it will say: Invalid URLThe requested URL "/", is invalid.Reference #9.df260e6b.1336506889.420cf4fSo what can I do? It happens on both my Macbook Pro and iMac - both connected wirelessly to a Linksys router/cable modem. The router is Wireless-N Broadband Router WRT160Nv3 with Firmware Version: v3.0.02.
View 1 Replies
View Related
Aug 1, 2011
I have an Access Point Cisco AP541N, working great, except that every 1 or 2 weeks, clients cannot connect anymore to it. I need to reboot it.
I recently updated the firmware to the latest version (AP541N-K9-2.0(0)), but that didn't work.
Is there a way on cisco access points to automate a daily reboot?
View 3 Replies
View Related
Dec 29, 2012
I am having a setup problem with the RE1000. When I plug it in, my laptop is able to see it, and I'm able to access it and attempt to set it up. However, once I tell it how to connect to my main wireless router, and it attempts to log onto my wireless network, the RE1000 disappears from my list of networks. My blu-ray player also cannot see it.
View 5 Replies
View Related
Jan 1, 2013
I recently replaced an old Linksys with a Cisco E3200. All our devices get "stuck" periodically and can connect to the E3200 but not the internet. We power cycle the E3200 and all is fine. But only for a period of time, then we need to power cycle again. The range is less than my 4 year old Linksys was also, devices maybe 30 feet lose their connection even more quickly, forcing more frequent power cycling.
View 2 Replies
View Related
Feb 28, 2013
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
ISP : Comcast
TP-LINK WDR4300 750N Dual-Band router issue.
I started having a problem with a VONAGE V-Portal VoIP adapter losing connection to the Vonage server. I Unplugging the adapter and waiting doesn't solve the problem. The only way I can temporarily fix the issue is to reboot my TP-Link router. Once the router is rebooted the adapter can connect to Vonage. After a few hours it loses connection again. I have set the adapter to use a static IP outside of the DHCP reserved pool. This didn't fix the issue.
I have had vonage for many years and this router for the last 10 months and not had a problem until the past two weeks. Nothing only my local network changed. All of my PC's have no problems with internet access during the time that the Vonage adapter gets an Error 004 (lost connectivity). I still have connectivity with my ipod touch and other internet enabled devices as well. I was using 8.8.8.8 as my DNS server in the router DHCP configuration as well as the static value when I tried using a static IP with the V-Portal. I then switched all system to the ISP (Comcast) preferred DNS servers. The problem still exists. The only way to get the Vonage adapter back to running is to reboot the router.
I should mention I have Motorola Cable modem to a TP-LINK WDR4300 750N Dual-Band router. I have two Vonage vportal adapters plugged into the a couple of the LAN ports on the TP-LINK router. One vportal is my roommates, one is mine. Everything has been working fine for the last 6 months and now one or the other Vportal loses communication through the router, but the other vportal doesn't lose connectivity. It only happens to one of them and it varies as to which one will ERROR out.
View 2 Replies
View Related
Mar 12, 2012
One of my laptops is having a connection problem. I have 3 other laptops that can connect perfectly with my router, and normally there's only 1 laptop that is connected to my router. The laptop with the slow connection (takes 5 HOURS to load a website, sometimes will not even load), i re-installed the OS, and installed all the drivers needed, and it still wont work. it shows strong connection to me, and im sure the password for the router is right. below is the ipconfig/all information. Having this problem for 2+ weeks now!!! I think this problem started when i restored my router to factory setting, my router is Netgear WGR614v6.
View 14 Replies
View Related
Mar 1, 2013
I have an Asus Model U56E. Recently the wireless has been disappearing whenever I turn off my laptop. What I mean is that when I turn on my laptop, the wireless doesnt seem to exist. I go under device manager and all I have is the eternet and my bluetooth device. About 85% of the time, when I go under "action" and click on "scan for hardware changes" the my Intel(R) Centrino(R) Wireless-N1030 will show up along with the Microsoft Virtual WiFi Miniport Adaptor and I'll get my wireless back. However, when my laptop turns off, the same thing happens.
In addition, my fn F2 button no longer seems to work. I'll press on it and majority of the time my light that signals that the wireless is working does not turn on. Most of the time it stays off whether or not I am connected to the wireless
This is what I already attempted to fix it, based on googling for answers:
1. Under the properties of my wireless and miniport adapter, I went under power management and unchecked the box that says "allow the computer to turn off this device to save power"
2. I went to my laptop's power plan and changed all my wireless adapter settings "power saving mode" to maximum performance for both battery and cord
3. I went to the intel website, had it look at my laptop wireless system and followed their recommendation of installing an updated wireless software thing. All that happened was that it told me to disable my old wireless and then install it. However, even though I followed their instructions, it continued to repeat the same message. I had to perform a system restore to get my old wireless back
4. I disabled wireless console 3 (by Asus) under programs and it seemed to work. My laptop was getting connected whenever I turned it on. However, the next day my laptop updated itself (b/c of my system restore) and I am back to the same situation except my wireless console is still disabled.
View 19 Replies
View Related
Mar 1, 2012
In order to feed my netgear dgn1000 adsl modem/router with a rca roadrunner modem with ethernet single jack do I enable NAT or not on Netgear router and do I use router as DHCP or not?
View 2 Replies
View Related
Oct 26, 2011
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies
View Related
Jul 8, 2012
I just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
View 5 Replies
View Related
Jan 10, 2012
AI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies
View Related
Sep 1, 2011
i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
View 5 Replies
View Related
Aug 19, 2012
I'm using an HP Elitebook 6930p with Windows XP and an HP EN488UT docking station. When I use the computer by itself the Network Connections shows "Local Area Connection 3 Connected Intel 83567LM Gigabit Network Connection" and I can connect to the internet. When I am in the docking station, I can also see this connection, as long as my notebok is open when I start up. However, if i start the computer with the lid closed (I just want to use the external monitor, not the notebook monitor) that network connection does not appear and I cannot connect to the intenet.
[code]....
View 5 Replies
View Related
Jun 19, 2011
Is there a way to have the router reboot every day automatically? Every few days no one on the network is able to use the internet until the router gets rebooted (which has to be done by unplugging it at that point, since I'm by then unable to connect via the web interface), and having it automatically reboot every day at a time when everyone is usually sleeping would be very convenient.
View 9 Replies
View Related
Feb 9, 2011
We are running about 75 computers in a network. We have a server here where all the clients have a shared folder that we map for them, but as soon as they restart their laptop, the map drive disappears. We are running a script that we tested on a network where the laptops were linked with a cable, but as soon as you switch over to wireless it disappears.
View 1 Replies
View Related
Jun 23, 2012
Having a strange problem that just started this week and got worse this evening. I have a RV220W that is feeding my network. The RV220W sits behind a broadband modem and acts as the DHCP for the network and those computers access the internet that way. Anyway, tonight started an issue where the the RV220W just disappears. Becomes unpingable. I recycle power, and within anywhere from 5 to 10 minutes, it's gone. No longer pingable. Even if I plug a latop directly into it.If I power cycle the RV220W it comes back and I can ping it and access it and its settings. 5 to 10 mins later, I again lose it. Nothing was done. Its been working fine for a few weeks. Had a similar outage last Tuesday, but a recycle of everything brought everything back into line. After I lose connection to it, the lights I expect to be lit remain lit.
View 1 Replies
View Related
Feb 3, 2012
I have a Linksys X3000 router. While it is running, connection latency will gradually increase over about a day until eventually it just stops working at all and I have to power it off and back on again.
Ping times to a local website slowly increase from 30ms immediately after restarting the router, to about 100ms about an hour before it will need to be restarted, then rapidly increase to over 1 second before it drops out completely. When this happens, no connections through the router will work, I cannot even ping it or connect to its configuration web page.
I upgraded the firmware to see if that would work but it didn't. I have had the exact same problems with the 1.0.0 and 1.0.01 versions.
Can I get it replaced? And in the mean time, is there some way to make the router automatically restart at a scheduled time?
View 2 Replies
View Related
