DLink 4500 - Scheduling A Daily Reboot?

Jun 19, 2011

Is there a way to have the router reboot every day automatically? Every few days no one on the network is able to use the internet until the router gets rebooted (which has to be done by unplugging it at that point, since I'm by then unable to connect via the web interface), and having it automatically reboot every day at a time when everyone is usually sleeping would be very convenient.

View 9 Replies


ADVERTISEMENT

Cisco Routers :: RV220W Needs Daily Reboot To Work

Mar 21, 2013

I recentlydeployed a RV220W and got it mostly working for the environment. One issue: remote users connecting from different locations. I set up QuickVPN to accomodate them, which seems to 'kinda' work. 'Kinda' because I have to reboot the RV220W each day before the clients can connect succesfully. The clients run a mix of WinXP-32, WinVista-32 and Win7-64. All other settings in the QuickVPN client have been verified for each user. They each have the latest verion of QuickVPN and the RV220W firmware is at the latest version. The networks at the remote locations are not numbered the same as the host location.
 
The clients work several times a day, but the RV220W needs to be rebooted every morning. Is this a known problem with a work around? Is there a better solution for VPN access from Vista-32 and Win 7-64?

View 6 Replies View Related

Cisco Wireless :: AP541N Access Points To Automate A Daily Reboot?

Aug 1, 2011

I  have an Access Point Cisco AP541N, working great, except that every 1  or 2 weeks, clients cannot connect anymore to it. I need to reboot it.
 
I recently updated the firmware to the latest version (AP541N-K9-2.0(0)), but that didn't work.
 
Is there a way on cisco access points to automate a daily reboot?

View 3 Replies View Related

TP-Link Dual-Band Wireless :: Have To Reboot WDR4300 Router Daily To Keep Vonage

Feb 28, 2013

Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
ISP : Comcast
TP-LINK WDR4300 750N Dual-Band router issue.

I started having a problem with a VONAGE V-Portal VoIP adapter losing connection to the Vonage server. I Unplugging the adapter and waiting doesn't solve the problem. The only way I can temporarily fix the issue is to reboot my TP-Link router. Once the router is rebooted the adapter can connect to Vonage. After a few hours it loses connection again. I have set the adapter to use a static IP outside of the DHCP reserved pool. This didn't fix the issue.

I have had vonage for many years and this router for the last 10 months and not had a problem until the past two weeks. Nothing only my local network changed. All of my PC's have no problems with internet access during the time that the Vonage adapter gets an Error 004 (lost connectivity). I still have connectivity with my ipod touch and other internet enabled devices as well. I was using 8.8.8.8 as my DNS server in the router DHCP configuration as well as the static value when I tried using a static IP with the V-Portal. I then switched all system to the ISP (Comcast) preferred DNS servers. The problem still exists. The only way to get the Vonage adapter back to running is to reboot the router.

I should mention I have Motorola Cable modem to a TP-LINK WDR4300 750N Dual-Band router. I have two Vonage vportal adapters plugged into the a couple of the LAN ports on the TP-LINK router. One vportal is my roommates, one is mine. Everything has been working fine for the last 6 months and now one or the other Vportal loses communication through the router, but the other vportal doesn't lose connectivity. It only happens to one of them and it varies as to which one will ERROR out.

View 2 Replies View Related

Keep Getting Disconnected From Dlink DGL-4500 Router?

Oct 5, 2011

Our router is a Dlink DGL-4500. Over the last 15 minutes I've been disconnected and reconnected about 5 or 6 times. This happens every so often. But even without it I get disconnected several times per day.I need to be able to stay online and for some certain programs to run, if they get disconnected I will have to reconnect manually and I can't do this if I am not near my computer.I think the problem is specific to my laptop. Most of the time I stay online ok, except for the lapses I've mentioned. I asked someone else in our house if they have been getting disconnected and they say they haven't. Here's an IPconfig and in the next quote box, I did an IPconfig/all>C:esults.txt, which I've posted the content of[CODE]

View 14 Replies View Related

DGL 4500 DLink Router - Accessing Computers / Printers On Other Side Of Bridge?

Oct 13, 2011

I have a DGL-4500 D-Link router as a base. And a DAP 1522 Ethernet Bridge I use to connect 3 devices and another router I am looking to host a media Server for the house(on the bridge).

View 5 Replies View Related

Cisco :: LMS 4.0 - Job Scheduling And Device Group

Jan 24, 2012

I scheduled a periodic job (for example the compliance check job) on week basis and I specified one user's device group for this job (for example the branch_routers group). All is working, but when new devices are added to this group (the branch_routers group), the scheduled job is not provided for these new devices. Is it the default behaviour? Can I change it?

View 1 Replies View Related

Cisco WAN :: 871 Scheduling A CLI Command To Be Implemented Automatically

May 15, 2013

Is it possible to schedule to have a router automatically remove a CLI command and add another one its place at a specific date and time?  Router platform is Cisco 871.
 
I need to have an access-list ACE to be removed and another one put in its place.  I need this to occur in the early morning but would prefer the router do it if it can be scheduled to do so automatically at a specific date and time.

View 7 Replies View Related

Home Network :: Scheduling Access With TP-Link Router?

Jan 8, 2013

I have a TP-Link TL-WR720N wireless router, and I am trying to set it up so that it limits the times that my kids can access the internet. I have included screenshots of all of the programming pages, so you can see exactly what I am looking at. Here is what I have done so far:

Schedule: I created several schedules for different days, weekdays, weekends, start at 1900, end at 2100, etc.

Host: I created a host name titled "All", and set it for 192.168.0.3 ~ 192.168.0.199. The router assigns from 192.168.0.2 thru 192.168.0.199. I assigned my computer's MAC address as the "Parent PC", and bound it to 192.168.0.2, through the "IP and MAC Binding" function. In this manner, I hope to limit the kids access, while allowing the parent PC to access it at any time.

Rules: I selected the option to "Allow" passing of packets during these hours. I then created rules, assigning the host "All" to the different schedules that I created. I set the target as any, and did not set up any targets in the target section, because I do not want to control what sites they visit (yet, anyway). I generally don't worry about the sites they visit, I just think they spend too much time on the internet.

Here is what happens. I use my laptop (not the parent PC) as a test machine. When trying to access the wireless, i have verified that the router does give me an IP address within the specified range I created in the schedule. If I set the Access Rule to "Allow" the packets to pass through the router, and try to connect during the time it is set for, it will not allow my laptop to even connect. The weird thing is, if I set it for "deny", I can connect, but I have no internet access. Either way, if I have any of the rules enabled, I cannot access the internet at all. Thinking maybe there was some sort of conflict with schedules, I tried enabling only one of the rules instead of all of them, with no change.

What am I doing wrong? Do I need to set targets? If so, does this mean I have to set one for every site I want them to be able to visit? Can I set a target as the IP address of the router? If so, what ports do I use?

View 1 Replies View Related

Belkin Routers :: F5D8636-4 / Parental Control / Client IP Filtering / Internet Access Time Scheduling

Mar 11, 2013

How to configure Belkin N (F5D8636-4) Client IP Filtering so that a range of client IP' deny access to the internet using the following blocked time ranges e.g. Mon 5:00pm to Tues 2:00pm, Tues 5:00pm to Wed 2:00pm, Wed 5:00pm to Thur 2:00pm, Thur 5:00pm to Fri 2:00pm, Fri 5:00pm to Sat 10:00am, Sat 1:00pm to Sun 10:00am, Sun 1:00pm to Mon 2:00pm - BTW - this access regime is to deny internet access for my teenage son?

View 3 Replies View Related

Setup 2 Routers DLink DIR-655 / DLink DI-524 On Same Network?

Apr 25, 2012

I have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.

Network Setup

Router 1 is a D-Link DIR-655
Router 2 is a D-Link DI-524

I need to know how to setup Router 2 so it basically become just a wireless access point

View 6 Replies View Related

Wireless Netgear SSID Disappears Daily At Same Time?

Dec 18, 2012

Every day around the same time the SSID for my wireless network disappears. I'm using a Netgear wnr2000v3. Prior to this I was using a Linksys router, which did the same thing... only more frequently (2-3 times a day).Between smartphones and laptops, there are about 6 devices connected to the network. They all lose their connection and cannot find the broadcasted SSID when this happens.Because it happens around the same time each day, it makes me think that it has something to do with the DHCP lease, which is 24 hours. Just a thought, as I don't really know how that works.

View 4 Replies View Related

Linksys Cable / DSL :: X3000 Requires Daily Restart?

Feb 3, 2012

I have a Linksys X3000 router.  While it is running, connection latency will gradually increase over about a day until eventually it just stops working at all and I have to power it off and back on again.
 
Ping times to a local website slowly increase from 30ms immediately after restarting the router, to about 100ms about an hour before it will need to be restarted, then rapidly increase to over 1 second before it drops out completely.  When this happens, no connections through the router will work, I cannot even ping it or connect to its configuration web page.
 
I upgraded the firmware to see if that would work but it didn't.  I have had the exact same problems with the 1.0.0 and 1.0.01 versions.
 
Can I get it replaced?  And in the mean time, is there some way to make the router automatically restart at a scheduled time?

View 2 Replies View Related

Cisco Routers :: SRP 541W Wireless Cuts Off Daily

Jul 17, 2012

I have a new SRP 541W with v. 1.2.4 firmware.
 
Daily, (random times) I have to do a hard reset in order to get the wireless up and running.  It works great and then with no warning, no other issues, the wireless just stops.  The wired connections still work just fine. 
 
Everything comes up perfectly fine after it reboots, until the next day when I have to reboot it again.

View 5 Replies View Related

Cisco AAA/Identity/Nac :: Daily Errors With Code 32603 On ACS 5.4

Feb 18, 2013

We are seeing daily erros on our ACS5.4 server like below:

View 1 Replies View Related

Cisco Routers :: RV220W Auto-reboots Daily?

Oct 12, 2011

I recently purchased the RV220W to upgrade by good, but aging RV042. I'm running the most recent firmware (1.0.2.4 as of this writing) and have noticed this router reboots daily. I'm guessing it's locking up and rebooting as it occurs as different times of the day. Compared to the RV042, this was a bit of a pain to setup especially with regard to port forwarding. I'm hesitant to reset and start over again especially since this is brand new.

View 2 Replies View Related

Security / Firewalls :: Best Email Service For Privacy / Daily Usage?

Jun 30, 2011

What is the best email service that puts a high priority on privacy yet is still easy to use on a daily basis?

View 2 Replies View Related

Cisco Switching/Routing :: 3560 Switch Is Rebooting Daily

Feb 12, 2013

I have observed a situation where one of our cisco switch 3560 is rebooting daily at periodic times.We have checked the power cables and source everything is fine and still clueless whats causing the issue. [code]

View 13 Replies View Related

Cisco WAN :: ASA 5520 / Setup A Log Dump That Could Happen Daily Or Perhaps Weekly?

Nov 4, 2012

I am running two ASA 5520 routers synched up with eachother. I had a massive connectivity issue this weekend that I am investigating. Now I have figured out how to get the live logging but I need to know how to get the old logs from my router.Also I am looking to set up a log dump that could happen daily or perhaps weekly.

View 1 Replies View Related

Cisco Routers :: Setup A Daily Wireless Schedule RV220W

Apr 27, 2013

I just bought a RV220W. One of the features I need to setup is a daily wireless plan, i.e. parental control: my wireless connection needs to be open at different times depending on the day, for 2 specific wireless devices, while others wireless devices have continuous access. Unfortunately, the wireless schedule only lets me set up one start/stop time only (i.e. the same one every day).
 
I noticed that I could possibly set up a firewall access rule with a specific schedule, but I have no idea if this would work, and how to set it up. My basic idea was then to open the wireless SSID I want to control from 7.30am to 11pm every day, and then add a firewall rule that would close the access to the said devices (using their MAC address) from say 10-11pm on given days... But I am not quite sure how to set this up.

View 2 Replies View Related

Cisco Routers :: RV220W Rebooting Daily / Setup With SSL VPN Users

Dec 3, 2012

I have a RV220W setup with SSL VPN users, authenticating to an internal Active Directory. Maybe 5 ports forwarded and 8 external IP addresses. Besides this i have 1 data VLAN and a voice vlan on my network.
 
The reboots are on different times on a day, even on Sundays at 7 AM when noone is logged in to the network.FW is at 1.0.4.17.

View 1 Replies View Related

Linksys Wireless Router :: WRT160Nv3 - Security Certificate Pop Up Daily With Errors

May 15, 2012

My issue occurs on ALL of my home computers (MacBook and iMac using wi-fi) and ALL of my browsers (Safari, Firefox, Chrome).The problem:- Security Certificates: They pop up daily for Facebook mostly, but also Twitter. I will click Continue, which takes me to...- 404 Error/Page Not Found Error: After the Certificate error mentioned above, this happens. Mostly to YouTube. It will stay like this for a few hours. I've cleared cache, rebooted, etc. etc. Nothing works.- Images turn into little blue boxes with a question mark in them. **When this happens, it's an indication that a Certificate box will pop up out of the blue.- Even on Google.com, it will say: Invalid URLThe requested URL "/", is invalid.Reference #9.df260e6b.1336506889.420cf4fSo what can I do? It happens on both my Macbook Pro and iMac - both connected wirelessly to a Linksys router/cable modem. The router is Wireless-N Broadband Router WRT160Nv3 with Firmware Version: v3.0.02.

View 1 Replies View Related

Linksys Wireless Router :: E3200 Loses Connection To Internet Weekly / Daily

Jan 1, 2013

I recently replaced an old Linksys with a Cisco E3200.   All our devices get "stuck" periodically and can connect to the E3200 but not the internet.  We power cycle the E3200 and all is fine.  But only for a period of time, then we need to power cycle again.  The range is less than my 4 year old Linksys was also, devices maybe 30 feet lose their connection even more quickly, forcing more frequent power cycling. 

View 2 Replies View Related

Talk Talk Router - Connection Is Suffering Idle Timeouts Daily

May 21, 2012

I've got an aol engineer visiting Thurs.to examine connection loss (since last Weds). But I'm convinced the problem is with the router. But from the tone of the aol tech questions I suspect he's already briefed his engineer to do his best to represent the problem as being either with my computer or positioning of router/filters/condition of wall-sockets - usual getouts.The talktalk router is neww, issued Feb 12, after my original router, speedtouch, started suffering idle timeouts every day.

View 3 Replies View Related

Broadband :: How To Reboot Pc

Jul 16, 2011

when i install a 3modem broadband, it appear im my pc, uninstall and reboot&restart your computer

View 1 Replies View Related

How To Reboot Modem

Mar 31, 2011

My modem decides to lose connection at odd hours/times, resulting in the need to restart it. So far my only solution is to manually do that. But, the modem is located in my roommates room who has different sleeping hours than I do. We have tried relocating it but it really doesn't connect then. Anyway, I have my laptop (Windows 7) and access my Netgear router to my Motorola modem supplied by Time Warner Cable. Under normal conditions I can connect to the Surfboard page for the modem and reboot it that way. But, when the connection is dropped, I can not access the modem page via 192.168.100.1. How can I 'remotely' reboot my modem so as not to disturb my roommate?

View 6 Replies View Related

No Internet After Reboot?

Jun 16, 2012

While i was vaccuming today i accidently touched the power outlet so that the modem and router got restarted. Ever since that the intenet stopped working, it does however connect to the wireless network.On the dlink dir-600 the interet lamp is glowing orange.We have restarted it countless times waiting 10 sec - 1 hour before plugging it back in.

View 8 Replies View Related

IP Address Lost After Each Reboot?

May 24, 2011

After every restart pc release ip address.

View 4 Replies View Related

Printer Offline After Reboot?

Jul 11, 2011

I've got 3 computers (2 desk 1 lap) all running Windows 7. I have 2 network printers. The printers are wired to one of the desktops and the other 2 computers connect via network. The printers work fine once I add them to each computer, but once I restart, the printers appear offline on the other 2 computers even though they work fine on the desktop to which they are wired.I've had this setup for a while and only recently this started happening. It looks like Win7 is messing with the IPs of the printers. I'm not an expert on how to find the IP addresses of the printers though and set them to static (if this indeed is the problem)

View 12 Replies View Related

To Reboot The Computer After Update

Jan 25, 2012

I have an update package that I need to launch at 1130 p.m., the problem is I don't know how to add in a reboot command so that once the update package is installed, the computer reboots. How could I force the computer to reboot once the update package has been installed, w/o any manual intervention?

View 1 Replies View Related

Can't Renew Ip Address Until Reboot

Jun 7, 2011

i'm running xp sp3, but it is not completely updated. (i was offline for about 8 months and missed tons of updates, still slowly getting things up to date but not there yet.) i install new programs all the time, but none that seem to coincide with this particular problem.

starting a few days ago, my internet randomly goes out. when i try to "repair" my connection through network connections, it says windows cannot renew the ip address. going to command prompt and trying ipconfig/release or ipconfig/renew gives a message about RPC not available. however, a simple reboot fixes everything. for a few hours or so.

i haven't been able to pinpoint exactly when the problem occurs. i often leave utorrent and peerblock running when i go to work - no other programs running - this is what first alerted me to the problem, coming home to find that at some point my internet went down and downloads didn't finish. just this evening i was surfing the web, watching youtube videos, when suddenly my connection went out. this time, only firefox was running, so not a problem with utorrent or peerblock. something else is causing the problem.

View 8 Replies View Related

Reboot Sets Gateway To 0.0.0.0

Sep 3, 2011

I use windows 7 pro 64, and just in this last month (which makes me think a windows update is responsible) I got a problem where restarting my pc or any bootup causes the internet to break. By that, I mean that all of my devices are recognized and peripherals such as phones & ps3 can use the internet, but my PC has broken functionality.In the prompt at left, I have run ipconfig twice. The first time is immediately after a restart. The second time, about halfway down, is after manually reinstalling my realtek ethernet drivers. It does not matter which version I install, only that it is done manually: then the internet works: It appears that every reboot sets my default gateway to 0.0.0.0, which is of course incorrect. How do I stop this from happening?

View 5 Replies View Related

Sharing Is Lost After Reboot?

Mar 10, 2013

I have 2 PC's. Main and 2nd. I share my media folder from Main to 2nd PC.I also have 3 users on the main PC and after each reboot, any user I choose has lost it's sharing settings.So I end up recreating the sharing with my 2nd PC every time again and again.I use Win7 64 bit with latest updates.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved