How To Reboot Modem
Mar 31, 2011
My modem decides to lose connection at odd hours/times, resulting in the need to restart it. So far my only solution is to manually do that. But, the modem is located in my roommates room who has different sleeping hours than I do. We have tried relocating it but it really doesn't connect then. Anyway, I have my laptop (Windows 7) and access my Netgear router to my Motorola modem supplied by Time Warner Cable. Under normal conditions I can connect to the Surfboard page for the modem and reboot it that way. But, when the connection is dropped, I can not access the modem page via 192.168.100.1. How can I 'remotely' reboot my modem so as not to disturb my roommate?
View 6 Replies
ADVERTISEMENT
May 21, 2013
I currently have a problem where I have to constantly reboot my ASA whenever my cable modem reboots. The ISP (Pen Tele Data) is setup so that my ASA has to obtain its' static IP using dhcp (ip address dhcp setroute) on the outside interface. Now, I also have another location with a cable connection (Comcast) that does NOT experience the same problem. However, the difference is this ISP allows me to assign my static IP directly on my outside interface. What can I do so that I don't have to reboot my first ASA everytime modem reboots.
View 6 Replies
View Related
Oct 21, 2012
Nearly every morning/evening I have to re-boot my router to get internet access. Netgear N300 ADSL2+ modem router Model DGN 2200 (had about a year), Windows 7 64bit Home premium Laptop connected wirelessly, Windows 7 64Bit Home Premium desktop connected by LAN cable. ISP BT Internet. Until recently this set up has been working OK with occasional loss of interent access and need to re-boot router. The internet light has been showing red on those occasions. Over the last two weeks I have found that when I turn one of computers on although all lights on router are green I have no internet access. I have to re-boot, then all is OK until the next day when I have to re-boot again. My phone line appears OK with no noise on line, no reported problems on BT broadband staus. The thing that puzzles me is that the lights are all green on the router yet my networking icon on the pc shows an exclammation mark and 'no internet access' and I do not have access to net.The wireless connection is OK with excellent strength.
View 7 Replies
View Related
Jul 16, 2011
when i install a 3modem broadband, it appear im my pc, uninstall and reboot&restart your computer
View 1 Replies
View Related
Jun 16, 2012
While i was vaccuming today i accidently touched the power outlet so that the modem and router got restarted. Ever since that the intenet stopped working, it does however connect to the wireless network.On the dlink dir-600 the interet lamp is glowing orange.We have restarted it countless times waiting 10 sec - 1 hour before plugging it back in.
View 8 Replies
View Related
May 24, 2011
After every restart pc release ip address.
View 4 Replies
View Related
Jul 11, 2011
I've got 3 computers (2 desk 1 lap) all running Windows 7. I have 2 network printers. The printers are wired to one of the desktops and the other 2 computers connect via network. The printers work fine once I add them to each computer, but once I restart, the printers appear offline on the other 2 computers even though they work fine on the desktop to which they are wired.I've had this setup for a while and only recently this started happening. It looks like Win7 is messing with the IPs of the printers. I'm not an expert on how to find the IP addresses of the printers though and set them to static (if this indeed is the problem)
View 12 Replies
View Related
Jan 25, 2012
I have an update package that I need to launch at 1130 p.m., the problem is I don't know how to add in a reboot command so that once the update package is installed, the computer reboots. How could I force the computer to reboot once the update package has been installed, w/o any manual intervention?
View 1 Replies
View Related
Jun 7, 2011
i'm running xp sp3, but it is not completely updated. (i was offline for about 8 months and missed tons of updates, still slowly getting things up to date but not there yet.) i install new programs all the time, but none that seem to coincide with this particular problem.
starting a few days ago, my internet randomly goes out. when i try to "repair" my connection through network connections, it says windows cannot renew the ip address. going to command prompt and trying ipconfig/release or ipconfig/renew gives a message about RPC not available. however, a simple reboot fixes everything. for a few hours or so.
i haven't been able to pinpoint exactly when the problem occurs. i often leave utorrent and peerblock running when i go to work - no other programs running - this is what first alerted me to the problem, coming home to find that at some point my internet went down and downloads didn't finish. just this evening i was surfing the web, watching youtube videos, when suddenly my connection went out. this time, only firefox was running, so not a problem with utorrent or peerblock. something else is causing the problem.
View 8 Replies
View Related
Sep 3, 2011
I use windows 7 pro 64, and just in this last month (which makes me think a windows update is responsible) I got a problem where restarting my pc or any bootup causes the internet to break. By that, I mean that all of my devices are recognized and peripherals such as phones & ps3 can use the internet, but my PC has broken functionality.In the prompt at left, I have run ipconfig twice. The first time is immediately after a restart. The second time, about halfway down, is after manually reinstalling my realtek ethernet drivers. It does not matter which version I install, only that it is done manually: then the internet works: It appears that every reboot sets my default gateway to 0.0.0.0, which is of course incorrect. How do I stop this from happening?
View 5 Replies
View Related
Mar 10, 2013
I have 2 PC's. Main and 2nd. I share my media folder from Main to 2nd PC.I also have 3 users on the main PC and after each reboot, any user I choose has lost it's sharing settings.So I end up recreating the sharing with my 2nd PC every time again and again.I use Win7 64 bit with latest updates.
View 7 Replies
View Related
May 10, 2011
i have a peak wireless router connected to my desk top or should i say modem, which was security enable with password and used to use my laptop a toshiba which used to automatically connect to my wirelless router i then rebooted router as couldnt remember password as my son wanted to connect with his laptop an xbox from his bedroom . since rebooting the router my son has conection with the xbox and his laptop but my laptop want find my nework
View 1 Replies
View Related
Jul 15, 2012
I have a cisco 1841 router which isn't able to boot properly from its IOS. it always prompt me on ROMMN.
Here it is:
System Bootstrap, Version 12.4(13r)T8, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 2008 by cisco Systems, Inc.
PLD version 0x10
[Code]....
View 3 Replies
View Related
Nov 22, 2011
I had to reset my Linksys WRT300N router because of issues with my internet provider and now I cannot get my Dell Inspiron E1405 to connect wirelessly. I am getting a status of limited or no connectivity with an ip address starting with 169. I have included the following:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, x86 Family 6 Model 15 Stepping 6
[Code]....
View 10 Replies
View Related
Nov 23, 2012
I have 2 XP machines, both connected to a network switch which connects them to a print server attached to a printer. The last print server recently died and has been replaced, but the problem remains. I've downloaded the driver from the printer manufacturers website and installed on both XP machines, one functions fine but after each reboot the printer is grayed out on the other. Removing it and adding again fixes this until the next reboot.I am aware of some networking issues at this site which result in a few dropped packets between sites but shouldn't be an issue here since they are all attached to the same switch.
View 13 Replies
View Related
Jan 5, 2012
My Internet speed slows down from about 4mpbs to 1mpbs approx until I reboot after which it runs fine until it slows down again.I have a Netgear DGN2000 router, and have tried restoring to factory settings and using it that way - made no difference.
View 1 Replies
View Related
Sep 12, 2012
Model No.BiPAC 5200S, Firmware: v2.10.1.0(UEO.C2C)3.6.0.0The router was supplied by Tata Indicam nearly 7 years back. Now I tried to configure for Bsnl BroadbandConfiguration is completed as specified in the user manual without any hitchRestarted the system as directed. But rebooting is not fructified. The system did not respond. Hence closed. Later verified the diagnostics and found that the adsl synchronization is failed. I am not a qualified person to analyze the problem.
View 1 Replies
View Related
Dec 7, 2011
I am running Windows XP. The machine used to be on a Domain, but I took it off. Now, when I reboot the machine, the Server service is gone, and I have to get it back buy Uninstalling then Reinstalling Microsoft File and Printer Sharing in the internet connections dialog. Is there some security policy or something that prevent the Server service from running at boot?
View 7 Replies
View Related
Dec 10, 2012
So I rebooted my router after adding a MAC address to the MAC address filtering scheme, and now it wont get its static IP and broadcast. what have I done and how can I fix it? and before someone says "Turn it off and on again" and "hard reset it", ive done this! it was first port of call!
View 3 Replies
View Related
Apr 2, 2012
Reboot an acer laptop 5517
View 1 Replies
View Related
Feb 9, 2011
We are running about 75 computers in a network. We have a server here where all the clients have a shared folder that we map for them, but as soon as they restart their laptop, the map drive disappears. We are running a script that we tested on a network where the laptops were linked with a cable, but as soon as you switch over to wireless it disappears.
View 1 Replies
View Related
May 4, 2010
I have a DIR-601 and I'm trying to play the IOQuake3 game Urban Terror (UT). Every time I try to get a list of servers the DIR-601 stops and reboots.What is that? Flood protection? Something else?
View 4 Replies
View Related
Jan 31, 2010
is there a way how to reboot DIR 615 using some kind of script?From time to time I need to reboot the router
I also have Dlink DNS 323 and somebody discovered a way how to shutdown it down using Wget:
[code]...
View 1 Replies
View Related
Dec 13, 2011
I have a Cisco 1841 router which stops functioning sporadically. You have to manually go do hard reboot on the router before it starts working properly.When it goes down, you cannot ping its internal interface (from the LAN side) not its public interface, it seems to go down quite regularly.Where do i start to diagnose, is it hardware failure, or config issue. Nothing has changed as far a the config goes lately.
View 1 Replies
View Related
Feb 11, 2011
In my test lab I have a CISCO VPN3002 that I would like to connect automatically C1841 after a power down. Unfortunately , when I do the setup , it works and connect directly (3 GREEN LED's).But after a power down , when I look back in the config , I have :
GROUP = 3000client Password=xxxxxxxx Verify=xxxxxxxx
USER = cisco Password= Verify=
Both Password and Verify are empty ?
View 2 Replies
View Related
Aug 3, 2011
I have CISCO 7206 router with NPE-G2 and 2 gig of memory. There's a vpn and pppoe servers on this unit and it hold maximum of 250-300 simultaneous connections. Periodically (1-5 times/hour) router suddenly reboots with lots of messages in console:
IPFLOW: Warning: V5 overfill -Traceback= 0x14975E4z 0x1A133F4z 0x1A16CC0z 0x1A17754z 0x1A17870z 0x3337874z 0x28F80Cz 0x66A704z
*** System received a Software forced crash ***
[Code].....
I googled about first "V5 overfill" but no luck, i analyzed crashifo's with cisco tool and it said - it is ios problem, but if i change ios - problem lives again, no matter which ios i use.
View 6 Replies
View Related
Aug 23, 2011
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies
View Related
Jan 16, 2013
I want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies
View Related
Feb 28, 2013
i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
View 1 Replies
View Related
Mar 6, 2013
When my Toshiba Satellite notebook first begins booting up, the ethernet cable "connected indicator" light is ON, but somewhere around the halfway booted-up point, the light goes out. Once booting is completed, I get the message "Network cable is unplugged". The cable is definitely plugged in, as I also have Ubuntu Linux running on this same machine (dual-boot), and use this cabled-connection ALL THE TIME (for both LAN and Internet access)
View 8 Replies
View Related
Aug 5, 2011
I have acer laptop with xp and must do enable my lan card to open conection in devices manager.every reboot the lan conection is disabled.for information I delete a virus pum bad proxy with malwarebytes before I have a problem know ervery thing is ok without virus.
View 6 Replies
View Related
Nov 26, 2012
It seems like my internet connection constantly disconnects and I have to restart my computer to get it to work again. I don't think its the internet connection because I've lived in 4 different apartments and this has happened. I'm having to restart my computer at least 4 times a day.Another thing I wanted to add is that it especially happens when I do something that is 'internet intensive' such as youtube or when I am using skype or msn video call.
View 1 Replies
View Related
Jun 6, 2011
I have a network with a Western Digital NAS. Several computers are on the network, some connected via ethernet cable and some via wireless. The NAS has several shares that are password protected so that only certain users can map to them - each PC has its own private share used for backup.
The problem device is a Fujitsu Seimens Amilo laptop with Vista as the OS. When trying to display a map of the full network it is unable to display one - I have tried all of the solutions described by the Vista help but none of them work.When using Map Network Drive and trying to browse for the NAS, nothing is seen - the only computer showing on the network is the Vista laptop. If I type in the share name using \nas_nameshare_name it won't connect but if I use the IP address, such as \192.168.0.101share_name, then it does connect. I enter the password, select Reconnect at logon and the drive is mapped.
If I put the laptop to sleep the drive is still mapped when it wakes. The drive remains mapped for as long as the laptop is on but if I reboot it then the drive is lost. In fact, there are two mapped drives, one with a password and one without. After a reboot the drive with the password is still showing, but as a disconnected drive (double clicking brings up the password entry screen, and then the drive will be mapped). The drive without the password just isn't there at all.
View 9 Replies
View Related
