Billion Router-failure To Reboot?
Sep 12, 2012
Model No.BiPAC 5200S, Firmware: v2.10.1.0(UEO.C2C)3.6.0.0The router was supplied by Tata Indicam nearly 7 years back. Now I tried to configure for Bsnl BroadbandConfiguration is completed as specified in the user manual without any hitchRestarted the system as directed. But rebooting is not fructified. The system did not respond. Hence closed. Later verified the diagnostics and found that the adsl synchronization is failed. I am not a qualified person to analyze the problem.
View 1 Replies
ADVERTISEMENT
Apr 4, 2013
We have several SF-300-48P switches, eveytime there is a power failure the switches need to reboot 2 or 3 times before they are able to route packets again.
View 1 Replies
View Related
Apr 13, 2011
I have a 7800N combined adsl2+ modem/router for about the last 3 months. About 2 days ago I came home from work to find the Wireless Network had dropped, although the green LED on the modem was still on. Since that time I have been unable to connect to the Wireless network, or even have the network appear on the list of connectable networks. I have two laptops a smartphone and the wireless network is not detected by any of these devices.
Nothing has changed with my WLAN setup, no settings were changed by me, no new devices recently connected. My main PC is connected by an ethernet cable and has not been affected, it remains connected to the internet at all times with no issues.
Things I have tried:
* Turning the router off/on
* Unplugging the router for 1 hour
* Changing Wireless Channels (Auto, 1,6,9,13)
* Disabled and Re-Enabled WLAN through modem settings page
* Changing ESSID Name
* Hiding ESSID then Re-Enabling ESSID
* Changing WPA2-PSK Passkey
* Isolating modem on phone line
and finally, Restoring to default settings, and starting all over again.
I live in a small apartment block and typically have 6-8 other low strength wireless networks in the list, and thought something may be conflicting with another device, however after changing channels 4 or 5 times I gave up on this thought.... None of the above resulted in the Wireless network being detected and displayed in a list of connectable networks. The wireless light remains on, and flashes periodically, but for all intents and purposes no Wireless Network seems to exist.
View 2 Replies
View Related
Jan 16, 2012
I am having issues with the wireless on my Billion 7800N My phone and other wireless items were able to detect and use the wireless until recently when now all I do is find it in the list, but when I go to use it, it says failed to connect.
View 1 Replies
View Related
Jul 20, 2012
I recently came home from work to find the safety switch on our house had activated causing half of our house to be without power...including our modem. It wiped all my settings...no big deal...I've entered them all back in again. But now I am no longer able to establish a connection to my laptops... The Wireless WPS light will not come back on the router no matter how many times I turn it off/on or reset it... When I go into the page to establish properties etc for the modem...the WLAN option doesn't even appear anymore. but they were at a complete loss also as to why the option wasn't there..
View 1 Replies
View Related
May 8, 2011
Telkom billion modem want the wifi signal to be 1km
View 2 Replies
View Related
Jul 24, 2012
my family kept having a problem with our Billion 6800n router. (or something like that).Basically we pinned the problem down to it not having the strength to keep several connections running through it. So we upgraded to a Billion 7800n and found it is much more stable and much faster.However it has been having a similar problem to our previous router.
Occasionally the internet light drops from green to orange, and we can't load any more pages until it has gone back to green.Here is a picture of what it looks like when in that status.But the weird thing is the connection bars on the windows toolbar at the bottom of the screen still show full strength.As shown here.Now I thought it might be because it was sharing a power board with other connections going through it,so I transferred it to a smaller two-plug one instead.
View 2 Replies
View Related
May 10, 2011
i have a peak wireless router connected to my desk top or should i say modem, which was security enable with password and used to use my laptop a toshiba which used to automatically connect to my wirelless router i then rebooted router as couldnt remember password as my son wanted to connect with his laptop an xbox from his bedroom . since rebooting the router my son has conection with the xbox and his laptop but my laptop want find my nework
View 1 Replies
View Related
Nov 22, 2011
I had to reset my Linksys WRT300N router because of issues with my internet provider and now I cannot get my Dell Inspiron E1405 to connect wirelessly. I am getting a status of limited or no connectivity with an ip address starting with 169. I have included the following:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, x86 Family 6 Model 15 Stepping 6
[Code]....
View 10 Replies
View Related
Jan 5, 2012
My Internet speed slows down from about 4mpbs to 1mpbs approx until I reboot after which it runs fine until it slows down again.I have a Netgear DGN2000 router, and have tried restoring to factory settings and using it that way - made no difference.
View 1 Replies
View Related
Dec 10, 2012
So I rebooted my router after adding a MAC address to the MAC address filtering scheme, and now it wont get its static IP and broadcast. what have I done and how can I fix it? and before someone says "Turn it off and on again" and "hard reset it", ive done this! it was first port of call!
View 3 Replies
View Related
Jan 31, 2010
is there a way how to reboot DIR 615 using some kind of script?From time to time I need to reboot the router
I also have Dlink DNS 323 and somebody discovered a way how to shutdown it down using Wget:
[code]...
View 1 Replies
View Related
Sep 10, 2012
Can I schedule a weekly reboot with this router?
View 3 Replies
View Related
Feb 18, 2012
I have to reboort my router every day to get back an internet connection? I have a desktop and a laptop plus iPads, etc. The laptop loses connectivity every day about the same time. My only solution so far is to reboot the router. I realize that the client lease time is set to 1 day by default but isn't it supposed to ask the modem for another day of life when this happens?
View 5 Replies
View Related
Aug 20, 2012
I unplugged my router and when I plugged it back in, it stopped working. The 4 port lights and the ethernet light come on immediately when I plug it in instead of the normal boot sequence.
I tried resetting it, leaving it unplugged for long periods, using the power supply from my other router,... nothing works.
View 6 Replies
View Related
Feb 12, 2013
I have a Linksys WR-110 wireless router that has been acting up lately. I have 10mbps cable internet and have my desktop computer hardwired to the router. I notice that after a few days the download speed gets down to the 2mbps range. Verified by { URL}. If you do a hard boot (unplug for 30 seconds) it will go back to 10mbps speed again. But it seems after a few days it slows own again.
I always run speed test to verify, and it always runs back up at advertised speeds once i hard boot.
Why would this be happening?
View 11 Replies
View Related
Jul 24, 2012
seeing very strange behaviour of router router is connected to switch to provide analog when swich configured as trunk the router crash and reboot but when change to access its stable
[code]....
View 15 Replies
View Related
Aug 21, 2011
I recently installed a tp-link router everthing works ok. The problem is when I turn off my pc and disconnect it and all attached devices (modem, router ect) from the electric supply. When I turn it back on I have no internet connection until I reboot the pc a second time.This problem only occurs when I disconnect the router from the electric supply. If I just shut down without disconnecting then I can turn it on and it connects to the internet without any problem.
View 5 Replies
View Related
Sep 29, 2011
I just installed two FPS games.. My router reboot every time those game search for servers list. ( So i can't actually play those games) I have a dir-601 n-150 dlink router. I have successfully played online with another connection. I tried opening some ports, but it didn't work. The firmware is up to date.
View 5 Replies
View Related
Mar 1, 2012
A few weeks ago I noticed that at 9:00am sharp every morning my internet access dropped, and would come back up four minutes later.
The router is connected to a DSL-526B in bridge mode. My first thought was that the modem was playing up, so I factory reset it and reconfigured it.
I checked my ACLS and didn't see any rules that started or ended at 9:00 am so I just lived with it for a week or so until it got so annoying I contacted my ISP to see if they were resetting anything at 9am.
By accident, I saw that my wireless radio was being enabled aat 9:00am, as it had been for the last 2 years, when I first bought the router. But this problem has only started a few weeks ago.
So I changed the wireless schedule to see if that was really the cause for the reset, and sure enough, whatever time I changed the wireless schedule to, the router rebooted at that time.
I've also factory reset the router; twice; the first time I saved/restored my configuration, the second time I recreated all configuration from scratch.
why enabling the wireless radio resets the router, and why disabling it doesn't, and how to correct this behaviour?
View 14 Replies
View Related
Jul 23, 2012
my E1000 will slow down and, as I've done with other routers, I'll typically unplug it for about 20 seconds and reboot it. However, with my E1000, about 9 out of 10 times, after I plug it back in, the four port lights on the the left will dimly flash but I get no activity on the three right blue lights (the wifi, internet and power buttons) and thus no wifi or internet.
For example, this morning I unplugged the router and modem, plugged the modem back in and waited for the modem activity lights to start flashing and then plugged in the router. The four blue port lights on left side flashed very dimly but no other activity. I unplugged it and re-plugged it in about 10 times and finally, the lights on the right side popped on and all was well.
View 1 Replies
View Related
Jan 5, 2013
Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : Ownit
I am having problems with my TL-MR3420 router, it disconnects WIFI all the time. This occur several times a day and is very annoying.
I have quite recently upgraded to the latest firmware but the problem seem not to have been resolved. It also seem that it is mostly the WIFI service that is the problem. The usage of wired routing is working even when the WIFI is disabled.
View 3 Replies
View Related
Jul 13, 2011
I have the Cisco series “Cisco 1700” routers operational at my client site, These router suddenly get reboot with 1 or 2 hrs gap. See the below errors which has been captured in router logs:
============================================================
00:00:09: %SYS-5-CONFIG_I: Configured from memory by console
00:00:11: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(16.1)T, MAINTENANCE INTERIM S
OFTWARE
TAC Support: [URL]
[code]....
View 1 Replies
View Related
Jan 19, 2012
I'm experiencing significant slowness with my E4200V2 that is resolved after a reboot. Here is a pre/post reboot ping:
C:Users
eil>ping www.google.comPinging www.l.google.com [74.125.115.106] with 32 bytes of data:Reply from 74.125.115.106: bytes=32 time=1275ms TTL=52Reply from 74.125.115.106: bytes=32 time=994ms TTL=52Reply from 74.125.115.106: bytes=32
[Code]....
As you can see, the results indicate that the reboot fixes the issue, and the difference is significant and noticeable. I find that I need to reboot the router once every few days. My old router, a WRT54GL, was rock solid with the same ISP (I'm in an apartment and plug a LAN cable directly into the wall. What happens beyond that - I don't know. I think there's wireless involved somewhere, though.).
Clearly, rebooting the router resolves the issue. Since my old WRT54GL worked flawlessly, I suspect it's the router. Because the delay seems to happen between the router and the ISP, the possibilty remains that it's an issue on the ISP side. However, that seems unlikely given the stability I saw with the WRT54GL.
View 2 Replies
View Related
Dec 6, 2011
I have a Cisco 819 WAN Router (C819 Secure M2M GW (non-US) 3.7G HSPA+ R7 w/SMS/GPS).Software: Cisco IOS Software, C800 Software (C800-UNIVERSALK9-M), Version 15.2(2)T, RELEASE SOFTWARE (fc1)
For dialing in at my Provider (T-mobile Germany), I use the following chat-script:
chat-script gsm "" ATZ "" AT+CGDCONT=1 "OK" "AT!SCACT=1,1" TIMEOUT 60 "OK" "ATD*99#" "CONNECT"
Dial-In is successful after Reboot.Now, i want to simulate a conenction fault, e.g. termination by mobile provider.So I used the command "clear int cellular 0".After that, The router can't dial in again.
Debug shows:
Dec 7 11:04:03: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to down
Dec 7 11:04:14: CHAT3: Attempting async line dialer script
Dec 7 11:04:14: CHAT3: Dialing using Modem script: gsm & System script: none
Dec 7 11:04:14: CHAT3: process started
Dec 7 11:04:14: CHAT3: Asserting DTR
[code]...
Is the "clear interface cellular 0" the wrong way to test this, or why can't the Router reconnect?The only solution is a reboot, but that is not the best option. The router should automatically redial.
View 10 Replies
View Related
Feb 6, 2012
I have 2 computers connected to the router (via cable). The problem is that have to reboot the router several times per day because one or both computers lose their internet connection. This happens regardless if one or two computers are turned on.
Router: DIR-615
Firmware version 4.00
Hardware version: D1
Computer1: Win7 64
Computer2: Win Vista 64
View 15 Replies
View Related
Oct 30, 2012
Is it possible to force a reboot of the EA4500 through the Cisco app for the Cloud?
View 2 Replies
View Related
Apr 19, 2010
When connecting wirelessly (5GHz) to the E3000 after a day or so the wireless connection starts loosing speed. I have Comcast and usually get 20-30 MB download connections. After a day or so I start to lose speed (down to 5MB) until I reboot the E3000. Then I resume 20-30MB download connections. My wired connections appear fine and don’t experience the slow down. I'm doing my speed test with [URL]
The wireless slow down seems similar to the old memory leak condition of old Windows OS’s. Called Cisco and they don’t have an idea. They had me change a few settings (channel info) but I’m pretty technical and don’t feel that will fix it.
View 9 Replies
View Related
Apr 1, 2013
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : HNS/Instanet (Cable Internet)
I am using the Router in 3G/4G mode, with WAN only (PPPOE) enabled. I have set a personal SSID in the Wireless > Wireless Settings > Wireless Network Name field.
I do not see the particular SSID on my computer, instead on every reboot / restart of the device a random SSID is generated. see attached screenshot. I can connect and everything works well, but I have to enter the WPA key after each reboot.
View 2 Replies
View Related
May 6, 2013
Region : Netherlands
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.4 Build 110429 Rel.36959n
ISP :
I have a flaky internet connection, and it drops every few days. I've thus far powercycled my router by unplugging and plugging it back in, which fixes the issue.
I'm traveling soon, and would like to be able to have access to my stuff remotely, even after the connection drops.
I have two ideas:Run a script in Windows 7 which would soft reboot the modem - free, not sure if soft reboot is enough though. If that doesn't work, Get a hardware which would powercycle the router - haven't researched if these are readily available and cheap
Is there a way to schedule a soft reboot of my router using Windows system tools? I'd schedule it to reboot every night.
View 9 Replies
View Related
Sep 26, 2011
I need command for Script reboot (linksys E2000)
View 2 Replies
View Related
Apr 28, 2011
I own a lynksis wag54g2 wifi router. I can establish wi-fi connection with my Android phone, Iphone 4, notebook, but after I disconnect the device from the router, I can't reconnect it again until I reboot the router. I tried some othe mobile devices with wi-fi support, the problem is the same. I tried set up different wireless security settings, tried to switch wireless mode to b, g, and mixed, installed new firmware 1.00.19, but the problem is not resolved.
View 1 Replies
View Related
Nov 13, 2012
Yesterday my router was hangs and my services was stuck. I start the router hard booted and it works fine.This was second time i was facing this kind of scenario. The attached are the "show tech support" of the cisco router 2821.
View 2 Replies
View Related
