Wireless :: Telkom Billion Modem Want The Wifi Signal To Be 1km?
May 8, 2011Telkom billion modem want the wifi signal to be 1km
View 2 Replies
ADVERTISEMENT
Wireless :: Telkom Wifi Router Doesn't Pick Up The 3g Dongle?
Dec 19, 2011I bought the Telkom wi-fi router with A 3G dongle. If I plug the 3G dongle directly into a laptop it picks up immediately but when I plug it into the router it doesn't pick it up at all.
View 2 Replies View RelatedWireless Repeat Wifi Signal Of Cisco Epc3925 Modem?
Nov 1, 2012I am trying to wireless repeat the wifi signal of my cisco epc3925 wifi modem. The router i am using as extender is a netgear wndr3700. i dont have much knowledge about these thing and am losing so much time by trying to get it working. everytime i apply the settings in the netgear i am unable to connect to it (even wired) and have to hard reset it...attached are some screen shots of both devices from last settings I tried.
View 6 Replies View RelatedNo Wireless Detectable - Billion 7800N
Apr 13, 2011I have a 7800N combined adsl2+ modem/router for about the last 3 months. About 2 days ago I came home from work to find the Wireless Network had dropped, although the green LED on the modem was still on. Since that time I have been unable to connect to the Wireless network, or even have the network appear on the list of connectable networks. I have two laptops a smartphone and the wireless network is not detected by any of these devices.
Nothing has changed with my WLAN setup, no settings were changed by me, no new devices recently connected. My main PC is connected by an ethernet cable and has not been affected, it remains connected to the internet at all times with no issues.
Things I have tried:
* Turning the router off/on
* Unplugging the router for 1 hour
* Changing Wireless Channels (Auto, 1,6,9,13)
* Disabled and Re-Enabled WLAN through modem settings page
* Changing ESSID Name
* Hiding ESSID then Re-Enabling ESSID
* Changing WPA2-PSK Passkey
* Isolating modem on phone line
and finally, Restoring to default settings, and starting all over again.
I live in a small apartment block and typically have 6-8 other low strength wireless networks in the list, and thought something may be conflicting with another device, however after changing channels 4 or 5 times I gave up on this thought.... None of the above resulted in the Wireless network being detected and displayed in a list of connectable networks. The wireless light remains on, and flashes periodically, but for all intents and purposes no Wireless Network seems to exist.
Wireless On Billion 7800N Fails To Connect
Jan 16, 2012I am having issues with the wireless on my Billion 7800N My phone and other wireless items were able to detect and use the wireless until recently when now all I do is find it in the list, but when I go to use it, it says failed to connect.
View 1 Replies View RelatedHow To Boost A Wireless Modem Signal
Sep 16, 2011how can boost my wireless 3GModem signal?
View 1 Replies View RelatedWireless :: Cannot See Wifi Signal
Jan 20, 2013I want to connect myself on my friend router by wifi but i cannot see the network what should i do ,what usb receiver anntena is the best or what i nedd to buy and is working 100 % maybe is 400 meter is the distance but sure is not 1 mile
View 1 Replies View RelatedLinksys Wireless Router :: WRT160N Won't Hold Connection After Comcast Sent Signal To Modem
Aug 9, 2011Comcast had us unplug our modem in order to upgrade to their new faster speed. now our wireless router won't work. We've reset the router twice. we can set up the wireless network but we cannot connect to it. The connection last for about 5 minutes and then we get an error, cannot read IP address. Comcast says it is not their problem and linksys says they can't assist either.
View 1 Replies View RelatedBillion Router-failure To Reboot?
Sep 12, 2012Model No.BiPAC 5200S, Firmware: v2.10.1.0(UEO.C2C)3.6.0.0The router was supplied by Tata Indicam nearly 7 years back. Now I tried to configure for Bsnl BroadbandConfiguration is completed as specified in the user manual without any hitchRestarted the system as directed. But rebooting is not fructified. The system did not respond. Hence closed. Later verified the diagnostics and found that the adsl synchronization is failed. I am not a qualified person to analyze the problem.
View 1 Replies View RelatedWireless :: Get Wifi Signal To House 200 Ft Away Through Metal Building
Sep 9, 2012Have two desk top pc's in metal building office they are operating by way of DSL modem my provider is Century Link. I purchased a WRT 54Gl linksys wireless router hoping I would be able to get a WIFI signal to my house. I have no live phone lines in my home just the one in my metal building , how can I get a signal through the metal building to my home in order to use wifi on my Ipod and Iphone . Keep in mind I am 200 ft from my home and have a wooden shop and another metal building to go through to get to my home.
View 25 Replies View RelatedWireless :: Extending Signal Range Of Wifi Network
Feb 8, 2013Sending WiFi signal about 1/4 mile from my home to where my daughter lives so she can use her Samsung Galaxy2 Tablet on WiFi.There are homes, condos and trees in between us, so it is not a clear path.So far this is what I have done.I am using a modem and a Netgear WNR834B Wireless N Router.I connected a Hawkins Laptop Extender (HWREN Wireless 150N Mini Extender * single antenna outlet) into the router and connected a WiFi cable from the Hawkins to my tower outside above my roof and have attached a 10 dbi gain Trendnet antenna (omnidirectional) to the cable.But still the WiFi signal doesn't seem to be very strong at all when I test with my phone.And obviously, my daughters tablet does not see my router when she has her tablet search for WiFi.I also tried a 14dbi WIfi ASUS directional antenna and basically came up with the same outcome... she could not see the WiFi signal..My daughter lives in a condo and is not capable or allowed to install any outside antenna system whatsoever.
View 2 Replies View RelatedWLAN Option Missing From Billion 7800N?
Jul 20, 2012I recently came home from work to find the safety switch on our house had activated causing half of our house to be without power...including our modem. It wiped all my settings...no big deal...I've entered them all back in again. But now I am no longer able to establish a connection to my laptops... The Wireless WPS light will not come back on the router no matter how many times I turn it off/on or reset it... When I go into the page to establish properties etc for the modem...the WLAN option doesn't even appear anymore. but they were at a complete loss also as to why the option wasn't there..
View 1 Replies View RelatedLinksys Wrt54g - Supply 3 Pc's With One Wifi Signal From Usb Wireless Adapter?
May 15, 2011My cable went out and my neighbor and I have decided to split her at$t broadband, the phone/modem/router is a 2wire.
I have 3 windows 7 computers but only one wireless g usb wireless adapter from tenda. I also have a linksys wrt54g wireless router that I can use.
I have tried to set up the router as a wireless bridge by loading a DD-WRT bin on my linksys but it seemed way buggy -results - I was only able to get 2 of 3 online and if I restarted any of them I lost the connection completely.
Went back to stock firmware and tried to set up a lan between the 3 towers with the linksys then just bridge the two connections on the main pc - results -no internet at all on 2nd and 3rd pc... and when the connection to the wifi network is started I loose my networking to the 2 pc's on the linksys.
Im not sure if im not setting these up correctly as im just following guides and such but since im fairly good with computers this is making me crazy...to be able to set three computers up on 1 good clear wifi should be an easy task but it's just not working out..
Wifi Signal / Noise Hasn't Improved By Switching To Wireless-n?
Sep 13, 2011I have just replaced my 54Mbps Wireless-G router (Sky Broadband/Netgear - black, looks like a SkyHD box) with a 300Mbps Wireless-N TP-Link TD-W8960N router, I have also upgraded the the standard 3dBi antennas with a pair of TP-Link ANT2408CL 8dBi high-gain anetnnas.
However when using various WiFi analysis apps I'm getting a signal strength averaging -35dBm and noise of -96dBm when in the same room as the router. But the main bit confusing me is that this is in ALL configurations - with my old Wireless-G router, with the new Wireless-N w/ 3dBi antennas, and with the new Wireless-N w/ 8dBi antennas.
Am I misunderstanding the signal/noise thing or is this Wireless-N router not giving me a better signal at all? I plan on installing an identical setup in a property with patchy Wireless-G coverage next week and I was hoping this exact kit would be the solution.I have tested with two laptops and I am getting 130Mbps link with both, but I understand this is typical of laptop hardware. I don't have any devices with a certified 300Mbps card installed to test with.
Linksys Wireless Router :: E1000 Weak Wifi Signal
Jul 20, 2011Got a new e1000 after a RMA. The new unit has a very weak wifi signal. I've tried all different channels. It is running in mixed mode. No microwave, blue-tooth or other noise. 4 feet from the router and the signal is down to -90db. Take a few more steps away and the connection is lost.
View 2 Replies View RelatedLinksys Wireless Router :: Can E3000 Be Used To Boost Wifi Signal
Nov 24, 2012I have Att internet services and the modem I received from them has WiFi with it. The signal that it produces is very weak. I was curious if there is any way to use my E3000 to boost or repeat the signal so WiFi will extend through out the house.
View 4 Replies View RelatedLinksys Wireless Router :: Week Wifi Signal On Iphone 4 With E4200?
Nov 1, 2011all other devices have excelent signal
View 5 Replies View RelatedLinksys Wireless Router :: Ea4500 Wifi Signal Disappearing For Few Seconds
May 6, 2012My new EA4500 works fine all day, both wireless and wifi, on both bands, but nearly every evening, the wifi signal disappears, as shown on a wifi app for my smart phone, but not on Issid on my laptop, strangely, and my PC laptop and iPad both disconnect, then reconnect. Smart phone disconnects too. It isn't like the signal drops in strength, it just goes away! I have tried various settings on modes, and bandwidths, I am using different SSID's on each band, WPA2 security with a long non-dictionary passphrase and MAC filtering. The hardwire connection works great at 30+ Mbps even when the wifi is disappearing from the wifi scanner and the wifi connections are dropping. In other words, the cable connection/modem is working fine, but the wifi radio signal stops or the SSID drops off the signal. I really can't tell, but I know it is becoming very frustrating. The old WRT54GS works fine if I put it back on-line in the evening when these things start to happen.
I have turned off everything I can think of in the house that transmits or might transmit, in case it is an interference thing. I have tried disabling the 5 GHz side, since I can't see what is happening on that band, and the last thing I tried was changing the MTU from 1500 to 1400. So far, the past evening, it was okay, but I am not confident it will stay that way.
Linksys Wireless Router :: Wrt54gs Wifi Signal Weaker Than Befw11s4?
Aug 5, 2006I've had a LinkSys BEFW11S4 wireless router for several years now -- ever since it first came out (this is a version 1, not even a version 2).
View 3 Replies View RelatedLinksys Wireless Router :: Ea4500 Wifi Signal Weaker Than Old Wrt54g
Aug 27, 2012I recently bought the top end ea4500 hoping its "high end" claims would get a better wifi signal in my bedroom(on my iphone 4s) than what i was getting with my WRT54G.The end result is it constantly drops signal completely or shows my network but when I try to connect says "cannot connect to wireless network" even though it's staring me right in the face. When I hook my WRT54G up, I get a signal.. all be it weak, but at least it doesn't drop out on me.Did I just waste almost $200 on a high end router that can't push a signal out stronger than my almost 7 year old WRT54G? or am i missing some setting that will make this EA4500 worth its claims? settings info:everything is pretty much on "default" aside from the SSIDs for the different bands and the corresponding WPA passwords.
also another problem, it seems like the router itself craps out every 60-120 minutes, no leds lit up on the router and my modem (Cisco DCP3010) shows no "link". Yet when hooked directly to the PC there is a "link", so pretty sure its the router and not the modem.
Linksys Wireless Router :: E4200 Low Wifi Signal / Maximum Performance
Apr 19, 2011I've bought a E4200 router because of it's "maximum performance". With the normal settings i have a wireless range of maximum 10 m in the building. after 5m I've got a low signal.I tested a cheap Netgear-router, which had the same range as the E4200 a 125 Euro.Is my E4200 broke or is it just a bad buy? The settings are standard (that shouldn't be the problem, I guess!?)
View 9 Replies View RelatedBillion 7800n Internet - Light Drops From Green To Orange?
Jul 24, 2012my family kept having a problem with our Billion 6800n router. (or something like that).Basically we pinned the problem down to it not having the strength to keep several connections running through it. So we upgraded to a Billion 7800n and found it is much more stable and much faster.However it has been having a similar problem to our previous router.
Occasionally the internet light drops from green to orange, and we can't load any more pages until it has gone back to green.Here is a picture of what it looks like when in that status.But the weird thing is the connection bars on the windows toolbar at the bottom of the screen still show full strength.As shown here.Now I thought it might be because it was sharing a power board with other connections going through it,so I transferred it to a smaller two-plug one instead.
Access Point Or Wifi Signal Booster / D-link Wireless N Gigabit Router
Jan 2, 2013Got 1 Linksys WRT54G Router on the ground floor which uses PTCL DSL Internet and 1 D-Link Wireless N Gigabit Router on the first floor which uses World Call Cable Internet of my house. So yeah we have two internet connections.Getting weak signals from both of the routers in my room on the far left side of the house and little to no signals in the basementSo what I want to ask is that should I purchase better routers or should I go with a signal booster of some sorts like an Access Point or a Range Extender?Also is there such a device which would catch signals from both of these differently configured routers ( different internets, different wireless security keys etc ) and then boost them throughout the house if placed in an area where both the router signals are strong?
View 5 Replies View RelatedTp-link 300mbps Wireless :: Tl-wr1043nd / Wifi Shows Good Signal But No Internet?
Apr 18, 2013Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP : HughesNet
I received this router today, I have a MacBook Pro and a iPhone. The router came with a very small cd, I was very disappointed because , when I purchased this router from amazon , the discription read that this router is Mac compatiable. But that is not true if the cd is not compatiable! My problem is I get a good signal for wifi, but I can not open any websites with my Mac or my iphone.
Tp-link 150mbps Wireless :: Use Tl-wr700n Router To Share Wifi Signal In Hotel
Dec 28, 2012Region : Canada
Model : TL-WR700N
Hardware Version : V1
Firmware Version : latest
ISP : various
What would seem to be an ideal way to share a hotel wifi signal with other devices, would be:
Laptop signs into hotel/resort wifi and completes sign-in page. Share wifi signal with TP router via an ethernet cable. TP router acts as hotspot for connection by other devices. This is the method this Apple based article suggests:
[URL]
I have tried this with Windows 7 using a bridge between the laptop wifi and lan adapters. But I must be doing something wrong.
The other option is to use ICS, but not sure then if the hotel's system would see additional devices. (we are limited to 4 where we stay, but exceed that when family visits!)
Linksys Wireless Router :: E2500 - Send Stronger Wifi Signal / Dns Settings
Dec 1, 2011I just upgraded from a WRTG 54 version 2 wireless router to the Linsksys E2500. The reason for the change is to send a stronger wireless signal strength further in my house. Setup was easy to my laptop and XBox 360 but my Samsung Internet TV is another story. I can get my tv to get the wireless signal but when I click on an app nothing but error messages. Often times it will say to check my dns settings but I am not that tech savvy and don't know what to do.
View 9 Replies View RelatedConnect Tata Photon Modem To Bsnl Wifi Modem Via Usb Port?
Jan 16, 2013I want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies View RelatedAsus Eepc Seashell/ 1015pem Netbook - Wifi Connects Only Near To Wireless Router With Full Signal
Apr 13, 2011I have Asus EEPC Seashell/ 1015PEM netbook. The wi-fi connects only near/ so close to the wireless router with full signal. Just next room, blocked by a wall it disconnects, but full signal still exists. Is it anything to do with driver or hardware incompatibility- netbook has 802.11n adapter. Wireless router/DI624+ is 802.11g.
View 8 Replies View RelatedLinksys Wireless Router :: E4200 Connection Will Drop / Windows Display Yellow Triangle On Wifi Signal
Feb 6, 2013I have several E4200 routers deployed in our library district. In one branch, we have been having sporadic problems with computers not being able to maintain a connection. Typically the computer will connect and then the connection will drop and Windows will display the yellow error triangle on the wifi signal strength display.I have swapped the router with another brand new E4200 with the latest firmware but am still having this problem.
View 6 Replies View RelatedAdding A Second Modem To Increase Signal In A Part Of House
Feb 5, 2012I initially had a laptop and a desktop with one Telkom router, running both wireless and wired (Ethernet cable)pics removed for security purpose.My daughters got laptops, and I bought a Netgear Wireless N300 Router/Modem for a better signal.The signal is good, but at the extremes of the house poor.I found on the internet a plan of a Windsurfer and built one. The results were not that impressive.So I thought to incorporate the first router (the Telkom router/modem) somewhere in the LAN for a boost.I changed the first (Telkom) router to a booster, but struggled (used advice from the internet) and stopped the exercise. Some settings were changed on the Telkom modem. So this was the situation for the past 2 years.
View 1 Replies View RelatedComputer Forces Modem To Lose DSL Signal Repeatedly
Jun 24, 2012So i have AT&T dsl internet. but whenever i connect my computer wirelessly to the modem and get on the internet it repeatedly loses dsl connection every some odd minutes. the dsl light on my modem turns off, then blinks red, then fixes itself for five or so minutes until the cycle restarts. ive tried 2 wireless usb adapter and 1 internal wireless card. none have worked at all. but if its wired with an ethernet cord it works fine. we also have 2 other laptops that connect wirelessly and work fine. i dont understand what would cause this solely on my computer. ive also had AT&T come to my house and look at it and they said its fine, the issue is somewhere in my computer messing with the modem.
View 1 Replies View RelatedLinksys Cable / DSL :: WAG160 Windows Detects Modem / No Signal At All
May 26, 2011 I cannot get wireless collection to work up stairs with the WUS600N Adaptor at all,and with the modem 20 feet from from my laptop downstairs i am only getting 3 BAR SIGNAL STRENTH.Just had Replacement WAG160N ALEX A V2 as my other one died ,(did not have a problem with the one sent back for replacement) Have the latest firmware 00.20 installed model serial No is SSH10JA11079.WUS600N V1 latest drivers for windows 7 .03.10.Windows detects the modem ok, but there is no signal at all up stairs and with the modem downstairs even the wireless on the laptop (15 feet from the modem) is only 3 bar signal strength ,did have this problem with the one I sent back. I have gone through all the wireless channels setup in the set up page with customer support (5 hours!)
View 2 Replies View RelatedAny Way To Boost Wifi Signal?
Feb 20, 2011I have a wireless router that rests across the house next to the modem. The signal is too weak to reach to the other side of the house. Is there a way to boost the signal so I can get wifi from across the house or any other way to get an internet connection without several fifty foot wires going across the house?
View 1 Replies View Related