WLAN Option Missing From Billion 7800N?
Jul 20, 2012
I recently came home from work to find the safety switch on our house had activated causing half of our house to be without power...including our modem. It wiped all my settings...no big deal...I've entered them all back in again. But now I am no longer able to establish a connection to my laptops... The Wireless WPS light will not come back on the router no matter how many times I turn it off/on or reset it... When I go into the page to establish properties etc for the modem...the WLAN option doesn't even appear anymore. but they were at a complete loss also as to why the option wasn't there..
View 1 Replies
ADVERTISEMENT
Apr 13, 2011
I have a 7800N combined adsl2+ modem/router for about the last 3 months. About 2 days ago I came home from work to find the Wireless Network had dropped, although the green LED on the modem was still on. Since that time I have been unable to connect to the Wireless network, or even have the network appear on the list of connectable networks. I have two laptops a smartphone and the wireless network is not detected by any of these devices.
Nothing has changed with my WLAN setup, no settings were changed by me, no new devices recently connected. My main PC is connected by an ethernet cable and has not been affected, it remains connected to the internet at all times with no issues.
Things I have tried:
* Turning the router off/on
* Unplugging the router for 1 hour
* Changing Wireless Channels (Auto, 1,6,9,13)
* Disabled and Re-Enabled WLAN through modem settings page
* Changing ESSID Name
* Hiding ESSID then Re-Enabling ESSID
* Changing WPA2-PSK Passkey
* Isolating modem on phone line
and finally, Restoring to default settings, and starting all over again.
I live in a small apartment block and typically have 6-8 other low strength wireless networks in the list, and thought something may be conflicting with another device, however after changing channels 4 or 5 times I gave up on this thought.... None of the above resulted in the Wireless network being detected and displayed in a list of connectable networks. The wireless light remains on, and flashes periodically, but for all intents and purposes no Wireless Network seems to exist.
View 2 Replies
View Related
Jan 16, 2012
I am having issues with the wireless on my Billion 7800N My phone and other wireless items were able to detect and use the wireless until recently when now all I do is find it in the list, but when I go to use it, it says failed to connect.
View 1 Replies
View Related
Jul 24, 2012
my family kept having a problem with our Billion 6800n router. (or something like that).Basically we pinned the problem down to it not having the strength to keep several connections running through it. So we upgraded to a Billion 7800n and found it is much more stable and much faster.However it has been having a similar problem to our previous router.
Occasionally the internet light drops from green to orange, and we can't load any more pages until it has gone back to green.Here is a picture of what it looks like when in that status.But the weird thing is the connection bars on the windows toolbar at the bottom of the screen still show full strength.As shown here.Now I thought it might be because it was sharing a power board with other connections going through it,so I transferred it to a smaller two-plug one instead.
View 2 Replies
View Related
Jul 19, 2012
A couple hours ago, I set up a temporary AdHoc to share or "tether" the internet connection from a laptop (which got its internet from a router), to my iPod Touch. It worked fine and everything, in fact I was pleasantly surprised by the speed of it. Since it was a temporary AdHoc, I disconnected, and the network was deleted as expected. After a while I wanted to do it again, but when I tried to make the AdHoc, the option to "Share Internet Connection" has disappeared. I'm really puzzled as it worked just a while back, and now even the option is gone. Did some research on it and found out that it's some weird bug that had never been addressed. It had to do with the LAN and Wireless network adapters apparently and one of them had to have the ICS option checked and the other one didn't (something like that). Here are the screenshots of those settings on both my network adapters. Both adapters are enabled, except the LAN isn't "connected" since my primary way of getting internet is through a router connected to another computer.
View 2 Replies
View Related
Jan 13, 2013
Recently I bought RV220W router and found out that PPPoE connection option or profile do no have service name field at all. Unfortunately, my ISP requires this to be able to connect. I had done some research before buying this router by going through online device manager demos on cisco website. RV220's interface is not available, but RV215 is and I checked out some of the common features between both routers. Surprisingly RV215's PPPoE connection settings has service name option.
I suppose, unless there is new firmware update (my current router is already running the latest available firmware), this option cannot be added in the interface. What I want to know is, is there any way to configure the router to use the service name in PPPoE option or in PPPoE profiles? I don't think RV220W can be accessed via terminal/SSH or maybe even terminal.
View 8 Replies
View Related
Feb 27, 2012
ACE 4710 software A3(2.7) [code] Why is the fail-on-all option missing from the serverfarm that is of type redirect? This option is something that I would actually need in a certain situation.
View 1 Replies
View Related
Jan 26, 2011
I Echolife 520b, can not enable wireless network in the menu Basic Wireless LAN option is missing
View 1 Replies
View Related
May 7, 2012
I have Compaq 620 laptop...due to some problems I reinstalled my windows ..previously I had windows & ultimate N 32bit, now I installed windows & ultimate 32bitversion.the problem is that after reinstalling windows my laptop does not show WLAN option ..previously i have been using internet through WLAN but now may be driver problem it does not show WLAN option.
View 1 Replies
View Related
Sep 12, 2012
Model No.BiPAC 5200S, Firmware: v2.10.1.0(UEO.C2C)3.6.0.0The router was supplied by Tata Indicam nearly 7 years back. Now I tried to configure for Bsnl BroadbandConfiguration is completed as specified in the user manual without any hitchRestarted the system as directed. But rebooting is not fructified. The system did not respond. Hence closed. Later verified the diagnostics and found that the adsl synchronization is failed. I am not a qualified person to analyze the problem.
View 1 Replies
View Related
Dec 8, 2012
I recently picked up a Billion 7800N home router to replace my old netgear which was dropping signal alot.I seem to have develpoed a problem accessing my work network through the VPN client. I am able to connect the Cisco VPN client to the network ok but I don't have any access to the server and exchange email. I have tested the client settings on my old Netgear and it is working fine. This points me to the direction of the router....I don't have any packet filtering on and I have set up profile from my fixed internal home ip to the work ip to allow any protocol and any port.I have also port forwarded 500, 4500 and 10000UDP to my internal ip address.
View 4 Replies
View Related
May 8, 2011
Telkom billion modem want the wifi signal to be 1km
View 2 Replies
View Related
Feb 23, 2012
I was just checking my router's firewall log and I noticed a couple of entries which appear somewhat suspicious, amongst all the 'normal' background radiation of (mainly) Russian and Chinese IPs: [code] The source IP for these 'attacks' is/was unused on my internal network.
My router is a Billion BiPAC 7800N running 1.06e firmware. There are a number of devices permanently connected to the internal network and a number which are connected at other times (e.g. desktops, laptops, mobile/cell phones, games consoles). Some are wired, some are wireless. Some have static IPs (none of which are listed in the above 'attacks'), some have dynamic IPs (assigned by DHCP by the router in a range not listed above). The WiFi is secured with a strong key on WPA/WPA2-PSK, AES (no WPS). Web Access Control for the router is disabled. Block WAN PING (and Block WAN (IPv6) PING) are both enabled.
View 2 Replies
View Related
Jun 10, 2013
I would like to setup a 2504 to have one Guest WLAN and one Staff WLAN with a controller port for each WLAN connected to different devices.
I would prefer to connect the WLC Guest port to an ASA 5510 and the WLC Staff port to an internal 2960S switch. Will this work? I haven't setup a 2500 series controller previously.
View 4 Replies
View Related
Jun 29, 2011
I have a lap top that someone else uses, is there anyway I can set some setting that erasing the history is not an opinion?
View 1 Replies
View Related
Apr 22, 2011
I can't have found toolbar option in my computer. How can I find tool bar option on my computer?
View 1 Replies
View Related
Oct 10, 2011
I can't access the internet through my home pc. I can't setup a new connection because I'm missing the network icon. It was fine a few days ago but somehow somewhere I've lost the icon. I have tried to restore but couldn't bo back that far.
View 1 Replies
View Related
Jan 27, 2011
I was using my little PC laptop and it fell, and suddenly the internet doesn't work.It doesn't show me any wireless option at all (in bottom right corner. or in control panel)and in "Network Connections"there isn't the wireless option as there used to be.Now it only has 'LAN or high speed internet"I've tried looking at old threads but haven't found anything suited.Is there a way to reactivate? I've tried everything I can think of! (laptop has no CD drive)
View 2 Replies
View Related
Aug 14, 2011
I have an adsl router and windows 7 ultimate. The connction status sometimes show's limited connectivity when I click on disconnect and connect again it prompts for troubleshoot connectivity problem, on clicking this it runs a few checks and brings up a window saying connectivity has been fixed and then my internet work's fine. This problem sometimes does not occur all the time. Sometimes after i switch on the router and then the wifi switch it connects just fine.
View 1 Replies
View Related
Sep 2, 2011
I just spilled water on my companies Dell Latitude D630 and it didn't start. On the D630 I signed onto a domain. When I put the hard drive from the D630 to a Dell D620 the domain option is grayed out. The only option is to log onto locally. Is there anywhere to get the domain option back?
View 8 Replies
View Related
Mar 4, 2013
I'm looking to replace my Thomson router with a router capable of being programmed so it can turn wireless off at a certain time.
View 8 Replies
View Related
Apr 18, 2011
I have an old computer (xp circa 2005) and I would like to connect to my n router wich is using wpa2. The old computer doesn't seem to have wpa2 as an option, is there anything I can do?
View 1 Replies
View Related
Mar 25, 2012
Any problem while using SFTP option in ACS5.3.I am trying ot use host-key sync command but giving below error.
ACS/admin(config-Repository)# host-key sync
% Error: First character must be a letter
% Error: Invalid ip address or hostnameSOK-S12-ACS-1/admin(config-Repository)# host-key sync% Error: First character must be a letter% Error: Invalid ip address or hostname
As per documentation this command needs to be added directly.
View 3 Replies
View Related
Jul 4, 2012
Does the two listed POE switch ports on the 880 series routers are active out of the box (default) or is configuration or extra parts required as internet pictures appear to show what looks like a power connector new to the POE ports?
View 8 Replies
View Related
Feb 7, 2012
In one of our regional office I want to terminate 2 Internet links on a single 2811 Router and use both the links as primary and backup to enable site to site VPN. This also gives redundancy option if primary link fails. The Router has total 3 FE ports.
Current setup is terminating one internet link only on the router and establish site to site VPN to our HQ
ISP_Router--------------ASA_Firewall---------------------L3_sw_3560--------------------users
View 1 Replies
View Related
Mar 11, 2011
My D-Link DIR-628 is at the far end of my house (next to my desktop and cable modem) and my PS3 and laptop are at the other end of the house in my living room. I'm not sure what's in my walls but it is NOT WiFi friendly!
[code]....
So I was thinking about buying a cheap N router and flashing it with DD-WRT and putting it in the living room.
I'd like this 2nd router to:
(a) Plug into the PS3 thereby "upgrading" it's crappy wireless card to something faster
(b) Have it act as a WiFi repeater to boost coverage on the far side of the house.
So is this going to work the way I'm describing it here? That's my current understanding based on what I've read, but I want to make sure I'm not missing something before I order the hardware.
View 1 Replies
View Related
Nov 24, 2011
I have installed cisco lms4.1, seems to berest all working fine. But am not finding a option to enable email seetings options to send reports. I have already set smtp servers, through whihc threshold alerts are trigering, but am unavle get best practice reports. as per document, email setting option is available under Reports>reports settings. But I cant see email setting option under report setting, only 'set report path' is available.
View 1 Replies
View Related
Apr 16, 2013
I had purchased Dell Studio 15 in 2009-2010 and before few days back i had formatted my system and installed Windows 7 ultimate SP1. Now i am not able to get the option of Bluetooth. i am sure the issue is with driver of it. Some way to reinstall the driver or make it working properly.
View 2 Replies
View Related
May 8, 2011
I see the WS-SVC-AGM-1-K9 was EOL Jan 2010 ,What is the suggested Product Migration Option? Also if any is using this WS-SVC-AGM-1-K9 I would like some feedback ,Our problem is listed below and we are wondering of the WS-SVC-AGM-1-K9 will work ?
Looking at the best option to detect attempts at cracking our SIP servers. We see connections from scanners on the internet trying to brute force SIP passwords reasonably often, and would like to be alerted to them happening. Essentially we see hundreds of SIP registration attempts or Invites from the same IP, and this is how we know it is dodgy.
View 1 Replies
View Related
Sep 4, 2012
As per me 24x7 network monitoring service is one of the best technique.Even we can protect large scale or enterprise level network with unwanted attacks or virus. Alternative better option of Network Monitoring Service
View 1 Replies
View Related
Nov 24, 2012
My laptop is not showing the option to connect wirelessly . i was using the internet wirelessly two days ago but now the only option that shows up is connect via broadband ethernet cable. if i go to the control panel and open network and sharing center and i pick connect to the internet the only option i get is broadband. and if i click show a list of options i dont have it only shows dial up connections
View 1 Replies
View Related
Sep 10, 2012
Trying to create a wi fi zone in my apartment from my Virgin cable installation. Following their instructions on how to do this I can't succeed as the "view available Wireless networks" option does not appear on Windows XP
View 1 Replies
View Related
Jan 18, 2012
Has anybody gotten the FTP option to work with this camera? And if so how did you set up the path to point to the ftp share. The instructions say one thing but that one thing doesn't work. FTP is setup locally on my NAS box which does work. Or is this another one to add to the Firmware which list?
View 4 Replies
View Related
