While i was vaccuming today i accidently touched the power outlet so that the modem and router got restarted. Ever since that the intenet stopped working, it does however connect to the wireless network.On the dlink dir-600 the interet lamp is glowing orange.We have restarted it countless times waiting 10 sec - 1 hour before plugging it back in.
View 8 RepliesIt seems like my internet connection constantly disconnects and I have to restart my computer to get it to work again. I don't think its the internet connection because I've lived in 4 different apartments and this has happened. I'm having to restart my computer at least 4 times a day.Another thing I wanted to add is that it especially happens when I do something that is 'internet intensive' such as youtube or when I am using skype or msn video call.
View 1 Replies View RelatedI have 2 computers connected to the router (via cable). The problem is that have to reboot the router several times per day because one or both computers lose their internet connection. This happens regardless if one or two computers are turned on.
Router: DIR-615
Firmware version 4.00
Hardware version: D1
Computer1: Win7 64
Computer2: Win Vista 64
A few weeks ago, I noticed that my Internet connection had slowed down to a crawl. I waited a few days hoping it would go away on its own, but it didn't get better. So I asked this question about how to make it faster.
The problem went away after I updated to the latest firmware, so I didn't follow up too carefully. But every few days since then, my Internet has slowed down again. Unlike before, all I have to do to fix it is open the router administration page and press the "Reboot" button. Nothing else seems to work, though I'm sure there are options I haven't tried.
If it makes a difference, my girlfriend and I both transfer large amounts of data fairly routinely for school (videoconferencing, downloading entire recorded lectures).
The router is a Cisco/Linksys WRT160N v3 that's about a year old. Most of the time, it deals with just two standard Windows 7 laptops.
What could be causing these slowdowns, and how can I get rid of them?
I installed dd-wrt on my router, and I seem to be getting higher and more consistent speeds. Perhaps more importantly, my memory use is fairly constant.
My E3200 (firmware 1.0.04) loses access to internet every week or so and OK again when reboot.
View 6 Replies View RelatedI have the latest flash installed. I am making use of all the options available to this router. USB drive set up as a file server, both radio bands have devices which attach. All wifi security is wpa2 with a complex key string. Also have pc’s attached to all lan ports. I also have all the wireless devices registered on the mac address filter for access set to enable/allow. I have a total of 9 mac address in the list. One lan device is on the DMZ. One address is reserved. Not sure what other details you need.Router is used for online gaming, video streaming, and typical internet browsing.
View 1 Replies View Relatedwhen i install a 3modem broadband, it appear im my pc, uninstall and reboot&restart your computer
View 1 Replies View RelatedMy modem decides to lose connection at odd hours/times, resulting in the need to restart it. So far my only solution is to manually do that. But, the modem is located in my roommates room who has different sleeping hours than I do. We have tried relocating it but it really doesn't connect then. Anyway, I have my laptop (Windows 7) and access my Netgear router to my Motorola modem supplied by Time Warner Cable. Under normal conditions I can connect to the Surfboard page for the modem and reboot it that way. But, when the connection is dropped, I can not access the modem page via 192.168.100.1. How can I 'remotely' reboot my modem so as not to disturb my roommate?
View 6 Replies View RelatedAfter every restart pc release ip address.
View 4 Replies View RelatedI've got 3 computers (2 desk 1 lap) all running Windows 7. I have 2 network printers. The printers are wired to one of the desktops and the other 2 computers connect via network. The printers work fine once I add them to each computer, but once I restart, the printers appear offline on the other 2 computers even though they work fine on the desktop to which they are wired.I've had this setup for a while and only recently this started happening. It looks like Win7 is messing with the IPs of the printers. I'm not an expert on how to find the IP addresses of the printers though and set them to static (if this indeed is the problem)
View 12 Replies View RelatedI have an update package that I need to launch at 1130 p.m., the problem is I don't know how to add in a reboot command so that once the update package is installed, the computer reboots. How could I force the computer to reboot once the update package has been installed, w/o any manual intervention?
View 1 Replies View Relatedi'm running xp sp3, but it is not completely updated. (i was offline for about 8 months and missed tons of updates, still slowly getting things up to date but not there yet.) i install new programs all the time, but none that seem to coincide with this particular problem.
starting a few days ago, my internet randomly goes out. when i try to "repair" my connection through network connections, it says windows cannot renew the ip address. going to command prompt and trying ipconfig/release or ipconfig/renew gives a message about RPC not available. however, a simple reboot fixes everything. for a few hours or so.
i haven't been able to pinpoint exactly when the problem occurs. i often leave utorrent and peerblock running when i go to work - no other programs running - this is what first alerted me to the problem, coming home to find that at some point my internet went down and downloads didn't finish. just this evening i was surfing the web, watching youtube videos, when suddenly my connection went out. this time, only firefox was running, so not a problem with utorrent or peerblock. something else is causing the problem.
I use windows 7 pro 64, and just in this last month (which makes me think a windows update is responsible) I got a problem where restarting my pc or any bootup causes the internet to break. By that, I mean that all of my devices are recognized and peripherals such as phones & ps3 can use the internet, but my PC has broken functionality.In the prompt at left, I have run ipconfig twice. The first time is immediately after a restart. The second time, about halfway down, is after manually reinstalling my realtek ethernet drivers. It does not matter which version I install, only that it is done manually: then the internet works: It appears that every reboot sets my default gateway to 0.0.0.0, which is of course incorrect. How do I stop this from happening?
View 5 Replies View RelatedI have 2 PC's. Main and 2nd. I share my media folder from Main to 2nd PC.I also have 3 users on the main PC and after each reboot, any user I choose has lost it's sharing settings.So I end up recreating the sharing with my 2nd PC every time again and again.I use Win7 64 bit with latest updates.
View 7 Replies View Relatedi have a peak wireless router connected to my desk top or should i say modem, which was security enable with password and used to use my laptop a toshiba which used to automatically connect to my wirelless router i then rebooted router as couldnt remember password as my son wanted to connect with his laptop an xbox from his bedroom . since rebooting the router my son has conection with the xbox and his laptop but my laptop want find my nework
View 1 Replies View RelatedI have a cisco 1841 router which isn't able to boot properly from its IOS. it always prompt me on ROMMN.
Here it is:
System Bootstrap, Version 12.4(13r)T8, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 2008 by cisco Systems, Inc.
PLD version 0x10
[Code]....
I had to reset my Linksys WRT300N router because of issues with my internet provider and now I cannot get my Dell Inspiron E1405 to connect wirelessly. I am getting a status of limited or no connectivity with an ip address starting with 169. I have included the following:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, x86 Family 6 Model 15 Stepping 6
[Code]....
I have 2 XP machines, both connected to a network switch which connects them to a print server attached to a printer. The last print server recently died and has been replaced, but the problem remains. I've downloaded the driver from the printer manufacturers website and installed on both XP machines, one functions fine but after each reboot the printer is grayed out on the other. Removing it and adding again fixes this until the next reboot.I am aware of some networking issues at this site which result in a few dropped packets between sites but shouldn't be an issue here since they are all attached to the same switch.
View 13 Replies View RelatedMy Internet speed slows down from about 4mpbs to 1mpbs approx until I reboot after which it runs fine until it slows down again.I have a Netgear DGN2000 router, and have tried restoring to factory settings and using it that way - made no difference.
View 1 Replies View RelatedModel No.BiPAC 5200S, Firmware: v2.10.1.0(UEO.C2C)3.6.0.0The router was supplied by Tata Indicam nearly 7 years back. Now I tried to configure for Bsnl BroadbandConfiguration is completed as specified in the user manual without any hitchRestarted the system as directed. But rebooting is not fructified. The system did not respond. Hence closed. Later verified the diagnostics and found that the adsl synchronization is failed. I am not a qualified person to analyze the problem.
View 1 Replies View RelatedI am running Windows XP. The machine used to be on a Domain, but I took it off. Now, when I reboot the machine, the Server service is gone, and I have to get it back buy Uninstalling then Reinstalling Microsoft File and Printer Sharing in the internet connections dialog. Is there some security policy or something that prevent the Server service from running at boot?
View 7 Replies View RelatedSo I rebooted my router after adding a MAC address to the MAC address filtering scheme, and now it wont get its static IP and broadcast. what have I done and how can I fix it? and before someone says "Turn it off and on again" and "hard reset it", ive done this! it was first port of call!
View 3 Replies View RelatedReboot an acer laptop 5517
View 1 Replies View RelatedWe are running about 75 computers in a network. We have a server here where all the clients have a shared folder that we map for them, but as soon as they restart their laptop, the map drive disappears. We are running a script that we tested on a network where the laptops were linked with a cable, but as soon as you switch over to wireless it disappears.
View 1 Replies View RelatedI have a DIR-601 and I'm trying to play the IOQuake3 game Urban Terror (UT). Every time I try to get a list of servers the DIR-601 stops and reboots.What is that? Flood protection? Something else?
View 4 Replies View Relatedis there a way how to reboot DIR 615 using some kind of script?From time to time I need to reboot the router
I also have Dlink DNS 323 and somebody discovered a way how to shutdown it down using Wget:
[code]...
I have a Cisco 1841 router which stops functioning sporadically. You have to manually go do hard reboot on the router before it starts working properly.When it goes down, you cannot ping its internal interface (from the LAN side) not its public interface, it seems to go down quite regularly.Where do i start to diagnose, is it hardware failure, or config issue. Nothing has changed as far a the config goes lately.
View 1 Replies View RelatedIn my test lab I have a CISCO VPN3002 that I would like to connect automatically C1841 after a power down. Unfortunately , when I do the setup , it works and connect directly (3 GREEN LED's).But after a power down , when I look back in the config , I have :
GROUP = 3000client Password=xxxxxxxx Verify=xxxxxxxx
USER = cisco Password= Verify=
Both Password and Verify are empty ?
I have CISCO 7206 router with NPE-G2 and 2 gig of memory. There's a vpn and pppoe servers on this unit and it hold maximum of 250-300 simultaneous connections. Periodically (1-5 times/hour) router suddenly reboots with lots of messages in console:
IPFLOW: Warning: V5 overfill -Traceback= 0x14975E4z 0x1A133F4z 0x1A16CC0z 0x1A17754z 0x1A17870z 0x3337874z 0x28F80Cz 0x66A704z
*** System received a Software forced crash ***
[Code].....
I googled about first "V5 overfill" but no luck, i analyzed crashifo's with cisco tool and it said - it is ios problem, but if i change ios - problem lives again, no matter which ios i use.
When my Toshiba Satellite notebook first begins booting up, the ethernet cable "connected indicator" light is ON, but somewhere around the halfway booted-up point, the light goes out. Once booting is completed, I get the message "Network cable is unplugged". The cable is definitely plugged in, as I also have Ubuntu Linux running on this same machine (dual-boot), and use this cabled-connection ALL THE TIME (for both LAN and Internet access)
View 8 Replies View RelatedI have acer laptop with xp and must do enable my lan card to open conection in devices manager.every reboot the lan conection is disabled.for information I delete a virus pum bad proxy with malwarebytes before I have a problem know ervery thing is ok without virus.
View 6 Replies View RelatedI have a network with a Western Digital NAS. Several computers are on the network, some connected via ethernet cable and some via wireless. The NAS has several shares that are password protected so that only certain users can map to them - each PC has its own private share used for backup.
The problem device is a Fujitsu Seimens Amilo laptop with Vista as the OS. When trying to display a map of the full network it is unable to display one - I have tried all of the solutions described by the Vista help but none of them work.When using Map Network Drive and trying to browse for the NAS, nothing is seen - the only computer showing on the network is the Vista laptop. If I type in the share name using \nas_nameshare_name it won't connect but if I use the IP address, such as \192.168.0.101share_name, then it does connect. I enter the password, select Reconnect at logon and the drive is mapped.
If I put the laptop to sleep the drive is still mapped when it wakes. The drive remains mapped for as long as the laptop is on but if I reboot it then the drive is lost. In fact, there are two mapped drives, one with a password and one without. After a reboot the drive with the password is still showing, but as a disconnected drive (double clicking brings up the password entry screen, and then the drive will be mapped). The drive without the password just isn't there at all.
Is there a way to have the router reboot every day automatically? Every few days no one on the network is able to use the internet until the router gets rebooted (which has to be done by unplugging it at that point, since I'm by then unable to connect via the web interface), and having it automatically reboot every day at a time when everyone is usually sleeping would be very convenient.
View 9 Replies View Related