Is it possible to schedule to have a router automatically remove a CLI command and add another one its place at a specific date and time? Router platform is Cisco 871.
I need to have an access-list ACE to be removed and another one put in its place. I need this to occur in the early morning but would prefer the router do it if it can be scheduled to do so automatically at a specific date and time.
I scheduled a periodic job (for example the compliance check job) on week basis and I specified one user's device group for this job (for example the branch_routers group). All is working, but when new devices are added to this group (the branch_routers group), the scheduled job is not provided for these new devices. Is it the default behaviour? Can I change it?
View 1 Replies View RelatedWhy below simple PBR is not implemented in H/W knowing the Copp is not configured
NPE-1#sh ver | i image
System image file is "bootdisk:c7600rsp72043-advipservices-mz.122-33.SRE0a"
NPE-1#sh run int GigabitEthernet1/1
interface GigabitEthernet1/1
ip address 11.0.0.1 255.255.255.0
ip pim sparse-mode
[code]...
Is there a way to have the router reboot every day automatically? Every few days no one on the network is able to use the internet until the router gets rebooted (which has to be done by unplugging it at that point, since I'm by then unable to connect via the web interface), and having it automatically reboot every day at a time when everyone is usually sleeping would be very convenient.
View 9 Replies View RelatedI have a TP-Link TL-WR720N wireless router, and I am trying to set it up so that it limits the times that my kids can access the internet. I have included screenshots of all of the programming pages, so you can see exactly what I am looking at. Here is what I have done so far:
Schedule: I created several schedules for different days, weekdays, weekends, start at 1900, end at 2100, etc.
Host: I created a host name titled "All", and set it for 192.168.0.3 ~ 192.168.0.199. The router assigns from 192.168.0.2 thru 192.168.0.199. I assigned my computer's MAC address as the "Parent PC", and bound it to 192.168.0.2, through the "IP and MAC Binding" function. In this manner, I hope to limit the kids access, while allowing the parent PC to access it at any time.
Rules: I selected the option to "Allow" passing of packets during these hours. I then created rules, assigning the host "All" to the different schedules that I created. I set the target as any, and did not set up any targets in the target section, because I do not want to control what sites they visit (yet, anyway). I generally don't worry about the sites they visit, I just think they spend too much time on the internet.
Here is what happens. I use my laptop (not the parent PC) as a test machine. When trying to access the wireless, i have verified that the router does give me an IP address within the specified range I created in the schedule. If I set the Access Rule to "Allow" the packets to pass through the router, and try to connect during the time it is set for, it will not allow my laptop to even connect. The weird thing is, if I set it for "deny", I can connect, but I have no internet access. Either way, if I have any of the rules enabled, I cannot access the internet at all. Thinking maybe there was some sort of conflict with schedules, I tried enabling only one of the rules instead of all of them, with no change.
What am I doing wrong? Do I need to set targets? If so, does this mean I have to set one for every site I want them to be able to visit? Can I set a target as the IP address of the router? If so, what ports do I use?
I config LMS to manage many network devices with the same credential. However, only the Nexus 7000 fail to be archive configuration. LMS log said during telnet, the authentication fail 3 times. (I didn't use any authen server. The username and password are local. and in DCR page, i only configure " Primary Credential"l, nothing in "Auto Update Credential")Then i do a CAD check and fail also. I open the RME/CAD log, comparing with those successful log, there is one line different:[ Mon Mar 05 16:04:27 SGT 2012 ],WARN ,[main], com.cisco.nm.rmeng.inventory.cda.CdaFacade,getCdaHandlerIf, 163,CdaAG is not implemented for the device145.240.152.1 What does it mean "CdaAG is not implemented for the device?
View 1 Replies View RelatedMy quickvpn setup has been working great for a few years but it stop working recently with the following error message in wget_request_error.txt: HTTP request sent, awaiting response... 501 Not Implemented 20:10:10 ERROR 501: Not Implemented.quickvpn hangs on the dreaded verifying network stage.Checked VPN router logs and also quickVPN client logs and confirmed the tunnel has been created successfully. However the ping was unsuccessful.I look through the forum and confirmed that my quickvpn user account and password only contains alphanumeric characters.
View 1 Replies View RelatedI have used stack wise 3750 for a long time. Now,I have a new stack of 3750. Both of them are trunking together. If I have a VACL running in the old stack, do I need also implement in the new one.
View 1 Replies View RelatedAfter a storm in my neighborhood my wireless router was reset. It is a wrt54g purchased in 2007. I had to reinstall the Easy Link Advisor from the net because the disk I had did not work with Windows 7. Everything went OK, however, I am not able to add a password. I keep getting the following error message: Error Updating Devise The Method or Operation is not Implemented. How do I get around this issue and install some sort of security for my home network?My wireless network was named genesis50 now it went back to linksys. How do I change the name back? The hard wired system still shows as genesis50.
View 2 Replies View RelatedHow to configure Belkin N (F5D8636-4) Client IP Filtering so that a range of client IP' deny access to the internet using the following blocked time ranges e.g. Mon 5:00pm to Tues 2:00pm, Tues 5:00pm to Wed 2:00pm, Wed 5:00pm to Thur 2:00pm, Thur 5:00pm to Fri 2:00pm, Fri 5:00pm to Sat 10:00am, Sat 1:00pm to Sun 10:00am, Sun 1:00pm to Mon 2:00pm - BTW - this access regime is to deny internet access for my teenage son?
View 3 Replies View RelatedHow to set up time automatically in DI-624. I know that is old, but I need to syncro with an NTP.
View 3 Replies View RelatedMy bootvar is set to boot up images from disk0. The 6500 series switch has two redundant supervisors.Each supervisor has a PCMCIA card with the exact same IOS images in the 0 slot. The secondary supervisor is given the disk name slavedisk0 and the primary is simply disk0
View 2 Replies View Relatedis it possible that a public IP can be automatically routed to another public ip.For example I have two routers A and B. router B has a LanB in 10.0.0.0 network and the public ips are in the x.x.x.0 for internet access. router A is located at a remote location and has a public ip of y.y.y.0 network.
View 8 Replies View RelatedHow can I configure the CiscoWorks to automatically update the config files when a configuration change occurs.
Like in LMS 2.1:
Resource Manager Essentials > Administration > Configuration Management > General Setup
Change Probe Setup
Listen to Syslog Messages
i am getting around 12 emails a day returned mail demon and i havent sent them my friends are gatting sick of this every time they log on
View 1 Replies View RelatedWhy doesn't my PC automatically log into my wireless network when I turn it on,it try's to use a BT hotspot which is nothing to do with me so I have to manually select my network and log into it.How on earth do I stop this happening?
View 2 Replies View RelatedI have 2 wireless dvd players. In the past they automatically connected to the network on startup.I was making adjustments on the netgear wndr3700 router while experimenting with some cameras.Now I need to use the WPS option on the dvd player and then run to the router and push the WPS button.hen it connects.
View 1 Replies View Relatedsometimes the ethernet led is not glowing even if the cable is plugged in. how can i resolve this?
View 1 Replies View RelatedI have a 24Mbps (my bandwidth) connection, what I need is that all the computers in my network have the same bandwith. Let's say I have 12 computers so I want the 24 mbps divided across the 12 pc, but if I shut down 4 of those computers , I want some sort of software that would be capable of detecting that activity so my 8 remaining Pc will have more bandwith. I don't know If I was clear enough?what I need to know is:
-is the bandwith will automatically divised between computers?
- at least is this scenario possible?
just as information if I want to create a client/server with one server and 12 clients, and the initial bandwidth= 24Mbps, theoretically, how to devise the bandwidth between all clients, and if one client is shutdown, the bandwidth attached to it, will it redistributed between the other clients? if no, what happen with it?
I use CISCO VPN 5.0.07.0290 to connect to my office Network from the wireless internet connection at home. Whenever i Cisco VPN client, my internet is getting disconnected automatically within few minutes. This is happening only when i tried to connect from my home.
View 2 Replies View RelatedA client of mine is using a Cisco 877w wireless router, they have one IP phone connected to one of the RJ45 ports on the back of the router and their main desktop is also plugged directly into the router - this all functions perfectly.However, the router is in a private house and as such it provides connectivity for all other wireless devices such as iPhones, Ipads and Xbox Live etc. The problem is that the router only allows 5 devices to be connected at any one time and when a sixth attempts to connect to the router the first device (the IP phone) is diconnected automatically.
So my client can be using the IP phone for an important call and his son walks in with Iphone and Xbox, friends etc etc and the IP phone is immediatley disonnected from the router. I beleive that the router should allow more than 5 devices to connect and would hope there is a way of stopping the IP phone constantly being disconnected.I have already paid for "Cisco Engineers" to attend this site but they cannot get it working.
i have a problem with a 4006 switch, when the poer goes out and comesback, the switch doesn't boot, you have to get in the console and type boot, the config register is 0x102, i try to change it but it did not let me, said somethong like usage, what can i do to configure the booting automatically
View 1 Replies View RelatedIs there a way I can get the ACS (5.3) to email some of it's reports on a schedule?I'm hoping to send automated summaries of failed logins to the service desk each Monday morning.
View 3 Replies View RelatedI have an ACS 5.4 which is integrated with AD and a RSA. Is there any possibility to Stop the ACS Application automatically if either of these devices are down.
View 2 Replies View RelatedI have two RV082's connected across the internets using the primary WAN ports. They are both set to Auto Load Balance. Both ends of the VPN are set to "IP Only, IP by DNS Resolved".
If I attempt to access the remote subnet, the VPN won't automatically initiate a connection. However, if I do a "Tunnel Test" connection on both routers, then the remote subnet access works just fine.
Should the router automatically connect the VPN when a remote subnet is attempted? If so, what might I do to make it connect automatically?
Facing a unique problem in my cisco Router (2811) .. Router is well configured but suddenly it stops working , when logged in using console the configuration register is observed to be 0x2142.
How does it automatically changes register value during operation?
I have cisco router C1700. Interface FastEthernet0 is connected to ISP and obtain public IP and DNS via dhcp.On interface FastEthernet1 is connected private network. On router is configured dhcp pool that assigns addresses to private network connected on FastEthernet1. Is there configuration that automatically add the DNS servers from my ISP into the DHCP pool?
View 5 Replies View RelatedBefore nearly four years we have purchased 4 Cisco ASA 5500 Device for our organization.Out of these four device currently two are active in field and other two we kept as a spare.Now, in one active device we are facing very rare and strange issue.
The device automatically soft reboot once in nearly 60 days and we do not have any pre or post symptoms of this incident only server logs providing us this information.The device itself located in very controlled environment in a data center where physical tampering or temperature waviness is not possible.
We also asked one Cisco Expert from data center but still issue is not solved.Before two month, using remote syslog service we also started log redirection to a server so that when such incident occurs we have something to analyze but it is worthless log has nothing to tell us.
My questions are
1. "It is a hardware fault or software issue?"
2. "Is it possible with Cisco 5500 that automatically it reboots due to some internal hardware/software issue, if yes how we can trap or monitor it?
[code]...
I've been configuring hundreds of 3602i APs via Prime without incident, but I've encountered 2 APs that get to the ap: prompt and doesn't proceed further. If I type boot, then they'll complete the boot process.
How do I configure these 2 APs so they will automatically boot fully?
I have installed LMS 3.2 on a Win Server 2008, with 160 GB HDD. But it seems that it is running out of space after some times.So actually we managed to add another server, with a HDD of 500 GB capacity, and maped this HDD as a network drive.Now my question is: is it possible to enable LMS to automatically save all syslogs and collected data from the actual 160 GB HDD, to the new one 500 GB HDD?
View 8 Replies View RelatedCisco Rv042 (obtain an ip automatically) problam ?,Firmware Version : v4.1.0.02-tm (Sep 16 2011 18:40:48)
DHCP Server Working, but Cisco Rv042 can't obtain an ip address autimatically on WAN Ports.
Automatically some client ptr record vanishes from dns where as host (a) record exists, how can i verify from client side or how can i see logs files in client machine for the same.
View 1 Replies View RelatedEvery time I restart my computer, it unchecks the "connect automatically" box. I have to manually connect to my wifi. I go in and check the box agian just to have it uncheck next time I boot up. My wife has the same laptop that I do and hers doesn't do this. I'm guessing it must be a setting somewhere?
View 2 Replies View Related
