Every time I restart my computer, it unchecks the "connect automatically" box. I have to manually connect to my wifi. I go in and check the box agian just to have it uncheck next time I boot up. My wife has the same laptop that I do and hers doesn't do this. I'm guessing it must be a setting somewhere?
View 2 RepliesI have 2 wireless dvd players. In the past they automatically connected to the network on startup.I was making adjustments on the netgear wndr3700 router while experimenting with some cameras.Now I need to use the WPS option on the dvd player and then run to the router and push the WPS button.hen it connects.
View 1 Replies View RelatedRegion : India
Model : TL-WR841N
Hardware Version : Not Clear
Firmware Version :
ISP :
i bought the TL-WR841N a week back. the problem is that the internet connection has a web based login( wherin i have to go the "login.hathway.com" and enter a username and password provided by the service provider). i was wondering if there is anything i can do so that the wifi router on its own can log on to my account automatically every time i connect a device to the router. This would save alot of time for me.
Region : Sweden
Model : TL-WR740N
Hardware Version : V4.20.0
I have a TL-WR740N. If router is on and I turn on my laptop it will not automatically connect to the router. I must turn off the router and then turn on again to get connection to the Laptop. I think I have missed something in configuration of the Laptop.
So my AE1000 adapter doesn't connect to my network after waking my computer up from standby mode. I tried disabling the power management option where it allows you to turn off the device to save power but it still won't automatically connect to my network. I have to manually remove the adapter from the usb port and plug it back it for it to work again. I'm using Windows 7 64 bit,the latest drivers from Cisco's website, and my anti virus program is Microsoft Security Essentials
View 4 Replies View RelatedI have a Dell Inspirion M5110. Windows 7, 64 bit.
When ever I open the lid to the laptop it takes 5-10 mins before it will automatically connect to a network. Diagnose this network does not find anything, nor provides any troubleshooting. Typically if I open the network connections center and disable the wireless, let it sit for 30 secs or so, and re-enable, it will finally connect.
I know it's not my router, as the laptop does the same thing at work, and multiple different friends house.
I've confirmed that DHCP is set to automatic connect. I've also checked Device Manager/Network adapters/ and unchecked the box "allow the computer to turn off this device to save power"
My WRT54G2 v1 does not automatically connect to the internet on computer start-up. The computer will say "Connected, No Internet Access" In order to fix it I have to unplug the router and then plug it back in. This happens to any computer that tries to get online from a cold start-up. The router must always be unplugged, then plugged back in, then it will have internet access (and will generally maintain it throughout the session and even if the computer is restarted, i.e. warm boot). I have downloaded the latest firmware uprade.
View 9 Replies View RelatedWhy doesn't my PC automatically log into my wireless network when I turn it on,it try's to use a BT hotspot which is nothing to do with me so I have to manually select my network and log into it.How on earth do I stop this happening?
View 2 Replies View Relatedhow to connect Hotspot shield automatically on startup of Windows xp By checking the option to show on startup it starts on the tray but doesn't connect Is there a command line or something to do to connect it automatically ?
View 7 Replies View RelatedIve got a wireless router and until just recently my desktop was able to connect to my network automatically. I went into network settings and made sure the "connect automatically" was checked but it did nothing. I have to manually go in and connect every time even though it recognizes that there is a network to connect to.
View 1 Replies View RelatedI have two RV082's connected across the internets using the primary WAN ports. They are both set to Auto Load Balance. Both ends of the VPN are set to "IP Only, IP by DNS Resolved".
If I attempt to access the remote subnet, the VPN won't automatically initiate a connection. However, if I do a "Tunnel Test" connection on both routers, then the remote subnet access works just fine.
Should the router automatically connect the VPN when a remote subnet is attempted? If so, what might I do to make it connect automatically?
I have created individual folders for the different users on the network domain server, but i am having trouble allowing the client to automatically connect to their personal folder.
View 2 Replies View RelatedI have a cisco RV180W with a IPsec tunnel to the head office. The tunnel is working good, but if I reboot the RV180W, the tunnel don’t reconnect automatically, I need to go in the admin interface to IPsec Connections Status and press on Connect.Is there a way to make the tunnel connect automatically?
View 4 Replies View RelatedI am using Scientific Linux 6.2 (Variant of RHEL / CentOS) . Every day at a particular time there is a power outage at my place, and after 1 hour power is restored. My laptop is connected to a network switch, that has no Backup power, and connection is disconnected when power is gone. Laptop keeps running in battery power.
Now when power is restored, the ethernet connection (eth0) is not automatically restored in linux. It only says connection available under wired connection. The same thing happens to the Wireless Network Connections. What can I do to automatically connect to these networks, whenever they are available?
I'm using Fedora 15, in GNOME Shell, my mobile broadband connection was working absolutely fine, until I set the connection type to Connect Automatically using nm-connection-manager. Now, when I start the Fedora, the Top panel network icon shows red exclamation symbol and when I click it, instead of showing me available networks' list, it shows only "Network Settings", and when I open it, it shows GNOME 3's new Network Manager app, and it pops out the dialog saying that, "Current network settings service is incompatible with this version". And after a few seconds of log in, the shell freezes and all I can do is log out using Ctrl+Alt+BackSpace.
I'm facing this problem since I opened old network manager app using nm-connection-manager in the run dialog, and editing my connection to connect automatically.
After logging in to the shell I somehow managed to delete that connection from the same app and created a new one, but the problem still exists. How can I delete all network preferences (by deleting its configuration files from my home directory or something like that) and reset the GNOME 3's network manager to its default state?
I recently went through removing some trojan files and malware on my computer with Kevin over in the Virus and Malware Removal section and my computer but the one thing that is not the same now is my wireless internet connection. I have a Netgear wireless adapter. Before I was using the Netgear utility to connect and now that's not even opening at startup just using the Windows Internet Connection utility, which is fine with me but it just won't connect automatically at startup. I have to go manually hit connect and enter my key for it to connect.
[URL]
I used to have ATT DSL but we recently switched to U-Verse. I have a Trendnet TEW-452BRP 54g wireless router than was handling the PPPoE function. It was set to work flawlessly with my wireless cards. No dropped connections, speed or security issues. It always connected quickly from wake up and on start up. Now we have a 2Wire i38HG wireless router/gateway and it's been difficult to properly set my network up as before. I use the Trendnet behind the 2Wire as my wireless router. Took me a while to figure out what to do, but DHCP is disabled on Trendnet so 2Wire does what it needs to. This option works fine for me. The only problem is that at first my wireless card would not automatically connect to the network through the Trendnet when it is in range like I had it set to do previously. When I would force it to, after 3 times it would magically connect on it's own. I made some changes in the Trendnet (Mainly disabling dynamic DNS and NAT) and that seems to have made a difference. To be honest, I don't know if that is significant or not or if it actually made a longterm difference but it seems like it has. So my problem is now that when I put my laptop to sleep and have it wake up, it does not automatically reconnect. It takes about 2 minutes then it does on its own. I read the event viewer and this is the info it gave me - Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Warning
OpCode - IpLeaseRenewalFailed
Source - Dhcp-Client
Then after 2 minutes -
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Error
OpCode - IpAddressNotAssigned
Source - Dhcp-Client
After this, it connects by itself. I don't believe I have configured the 2Wire or Trendnet properly, so I need some guidance and suggestions on this matter.
Laptop - Intel Core Duo 1.66ghz, 2gb Ram, Win7 Professional with SP1, Intel PRO Wireless 3945ABG
2Wire - 192.168.1.254
Trendnet - 192.168.1.1
- I did not change the IP of the Trendnet and I am not sure if I have to.
From the 2wire - Private Network
Router/Gateway Address192.168.1.254
Subnet Mask255.255.255.0
Private Network DHCP Info
Range192.168.1.64 � 192.168.1.253
[code]....
I want to change router channels to avoid some interference. But do wireless adapters automatically identify the new channel or do I need to change those too?
View 3 Replies View RelatedI've been having a problem with my wireless network connection. Whenever I try and hit the Repair function,it will get stuck on Renewing your IP address for a moment, then change to: Windows could not finishing repairing the problem because the following action cannot be completed: Connecting to the wireless network. I have internet connection on this same computer.Another point to make is that when I click Repair and navigate to the Network Connections window, then hit F5 ( refresh the window ), the wireless connection will quickly refresh and connect normally without error.I won't have to open the Network Connections page and hit F5 anytime I need to repair the connection? Also, as of right now, it's still "Acquiring network address" even though I'm connecting and typing this message.
View 10 Replies View RelatedDoes a RESET automatically re-enable wireless = ON? or is wireless OFF until you go into the config and reenable it?
View 2 Replies View RelatedI've been configuring hundreds of 3602i APs via Prime without incident, but I've encountered 2 APs that get to the ap: prompt and doesn't proceed further. If I type boot, then they'll complete the boot process.
How do I configure these 2 APs so they will automatically boot fully?
I am testing our new wireless network using 1 Cisco 2504 wireless controller with 5 licenses 4 Cisco Air LAP 1142N Access Point I configured it very simple for testing There is only one interface and vlan is untaggetd There is also only one WLAN with one SSID Currently security setting is WPA + WPA2 + PSK (I also tested with no security setup) Wlan session time is diabled and controller user idle timeout is set to 1000000 (Max)AP boot version is 12.4.23.3 and ISO version is 12.4(23c)JA3 Problem is clinet(iphone) does not automatically associate with 1142N Access Point even after it learned network. Phone has to be authenticated again to connect to network same iphone can automatically associate with old 1220 Access point but not with New AP if I urn off and turn back on wifi from iphone, it does see the network but does not connect but I have to manually reconnect to it with password I want iphone to connect known network without reauthentication process after iphone's wifi function is turn on?
View 24 Replies View RelatedI have a WCS, four 5508 controllers, Cisco 3750X switches, and both autonomous Cisco 1200, and LightWeight 3502i in service.The problems I am having, is that some of my Access Point reset for no apparent reason, and I get alerted by my NMS.When I look at the switch port, that connects an access point that reported down, I see the POE switch port went down and back up in 4 seconds, just long enough for the access point to reset.There are no errors on the switch port(s). No cable or speed/duplex issues. Switch IOS: c3750e-universalk9-mz.122-55.se1
There are no other pertinent entries in the switch log. Just that the port went down and then back up. Always in 4 seconds.When a reset happens the WCS reports on the access point: '802.11/b/g/n' interface of AP associated to controller 172.20.0.x is down. Reason: Indicates that while the radio state should be updated on controller, no reset should be reported.But nothing else, except that the radio came back up.
This is happening two or three times a day, and rotates. It seems that it never happens at the same time of the day, or the same access point, or the same switch. (I have over 1000 access points and 500 switches in service)I am curious if the WCS is automatically resetting the access point radios, which is causing the switch port to go down/up?And if so, is it possible to turn off the automatic reset?
We have 2 Cisco 5508 WLCs, each wtih 50 licenses. What I would like to do is split the 50 odd APs between the 2 controllers load balancing the traffic. If a controller goes down or there is a break in the path all APs would failover to their configured secondary controller. So far so good.
However there seems to be no way to 'replicate' the configurations between controllers unless I setup HA , but as I understand it HA is Active /Passive, so essentially, unless you get a failover situaltion, completely 'redundant'.
Is there a way or either replicating between controllers automatically with out HA, or is there a way of making HA Active / Active?
I have a few questions about the Cisco WAP2000 we setup for our customers that I have experienced as of late.
1. The AP is prone to reset automatically; what causes the access point to do this and how can this be prevented?
2. The AP has the SSID and the encryption reset back to factory defaults, however the IP address does not get reset. What would cause this?
3. Is it possible to use 2 of the Cisco WAP2000 as a repeater to increase signal strength of another Cisco WAP2000 that has interference from another stronger signal?
I recently got an E1000 router brand new V2.1 from a friend. Seems to run great, only problem both my Mac Book Pros (running snow leopard and lion) will not reconnect automatically to the wifi after waking up from sleep.
View 1 Replies View RelatedRegion : Spain
Model : TL-WR1043ND
Hardware Version : V1
ISP : Telefonica
I have a shop and retail TP products.I have had in the past 2 days three TD-W8961ND's returned due to internet issues.upon investigation the problem is the same in that DHCP is not enabled on each of the 4x ports.It is the same across 3 customers and occurred last week end.
I log onto other wireless networks the first time by inputting their passwords. My iphone then always automatically reconnects wirelessly to them without have to input the password again. The phone can be asleep for a few minutes or I can be gone for a month. The phone always automatically remembers & reconnects to these networks.However, it doesn't work that way with my d-link system @ home. Everytime the phone sleeps and I wake it up, the wireless connection is lost. There is no automatic reconnection. I have to input the password each time in order to re-establish the wireless link. My printer and laptop seem to stay connected. d-link settings I need to change in order to get my iphone to automatically connect all the time?
View 7 Replies View RelatedWe have a Cisco 5508 controller with 1142 LWAP's running version 7.4.100.We have several Dell laptops which will not associate to the access point UNLESS you stand directly underneath it, power off the wireless, turn it back on then eventually the PC will associate to the AP.Once the PC is associated to the AP and user is authenticated then all is well.
Have tried updating the wireless drivers downloaded from both Dell or INTEL. This does not happen to all of our laptops. However, without making any changes to the WLC or the PC's, we have begun to expirence this problem with laptop which previously did not have this issue.
I have a problem on a 1131ag Access point on recycle it stops and makes me maunually type BOOT at the ap: prompt
----------VVVVVVVVVVVVV----------------
ap: Xmodem file system is available.
flashfs[0]: 282 files, 13 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
[Code].....
I have already performed the ap: set BOOT etc commands a dozen times with the same results. It says: The system is not configured to boot automatically.
I've been trying to get this one going for 4 months now..it was knocked out during a power outage while upgrading it.
After I restored my router to the classic firmware last week I unchecked the automatic upgrade box. This morning I found the box checked again. The router still has the firmware version I rolled back to last week. It appears Cisco has the ability to make changes to my router whenever they want.
View 2 Replies View RelatedI use an internet network via wifi that require username and password. The router for wifi network in my place and i connect my cisco(linksys wrt320n) to the router. Every time i want to connect to internet i have to enter my username and password.I try to configure my cisco modem but there is no result. Is there any way or program to automatically enter the username and password?
View 3 Replies View Relatedtoday I got up and discovered that my WRT160Nv3 router has resetted to factory defaults itself, the name of the Wifi network was "linksys" and all configurations were the defaults...
That's normal? This is the first time it happens.