I have a new SRP 541W with v. 1.2.4 firmware.
Daily, (random times) I have to do a hard reset in order to get the wireless up and running. It works great and then with no warning, no other issues, the wireless just stops. The wired connections still work just fine.
Everything comes up perfectly fine after it reboots, until the next day when I have to reboot it again.
I just bought a RV220W. One of the features I need to setup is a daily wireless plan, i.e. parental control: my wireless connection needs to be open at different times depending on the day, for 2 specific wireless devices, while others wireless devices have continuous access. Unfortunately, the wireless schedule only lets me set up one start/stop time only (i.e. the same one every day).
I noticed that I could possibly set up a firewall access rule with a specific schedule, but I have no idea if this would work, and how to set it up. My basic idea was then to open the wireless SSID I want to control from 7.30am to 11pm every day, and then add a firewall rule that would close the access to the said devices (using their MAC address) from say 10-11pm on given days... But I am not quite sure how to set this up.
I recently purchased the RV220W to upgrade by good, but aging RV042. I'm running the most recent firmware (1.0.2.4 as of this writing) and have noticed this router reboots daily. I'm guessing it's locking up and rebooting as it occurs as different times of the day. Compared to the RV042, this was a bit of a pain to setup especially with regard to port forwarding. I'm hesitant to reset and start over again especially since this is brand new.
View 2 Replies View RelatedI recentlydeployed a RV220W and got it mostly working for the environment. One issue: remote users connecting from different locations. I set up QuickVPN to accomodate them, which seems to 'kinda' work. 'Kinda' because I have to reboot the RV220W each day before the clients can connect succesfully. The clients run a mix of WinXP-32, WinVista-32 and Win7-64. All other settings in the QuickVPN client have been verified for each user. They each have the latest verion of QuickVPN and the RV220W firmware is at the latest version. The networks at the remote locations are not numbered the same as the host location.
The clients work several times a day, but the RV220W needs to be rebooted every morning. Is this a known problem with a work around? Is there a better solution for VPN access from Vista-32 and Win 7-64?
I have a RV220W setup with SSL VPN users, authenticating to an internal Active Directory. Maybe 5 ports forwarded and 8 external IP addresses. Besides this i have 1 data VLAN and a voice vlan on my network.
The reboots are on different times on a day, even on Sundays at 7 AM when noone is logged in to the network.FW is at 1.0.4.17.
Every day around the same time the SSID for my wireless network disappears. I'm using a Netgear wnr2000v3. Prior to this I was using a Linksys router, which did the same thing... only more frequently (2-3 times a day).Between smartphones and laptops, there are about 6 devices connected to the network. They all lose their connection and cannot find the broadcasted SSID when this happens.Because it happens around the same time each day, it makes me think that it has something to do with the DHCP lease, which is 24 hours. Just a thought, as I don't really know how that works.
View 4 Replies View RelatedI have an Access Point Cisco AP541N, working great, except that every 1 or 2 weeks, clients cannot connect anymore to it. I need to reboot it.
I recently updated the firmware to the latest version (AP541N-K9-2.0(0)), but that didn't work.
Is there a way on cisco access points to automate a daily reboot?
My issue occurs on ALL of my home computers (MacBook and iMac using wi-fi) and ALL of my browsers (Safari, Firefox, Chrome).The problem:- Security Certificates: They pop up daily for Facebook mostly, but also Twitter. I will click Continue, which takes me to...- 404 Error/Page Not Found Error: After the Certificate error mentioned above, this happens. Mostly to YouTube. It will stay like this for a few hours. I've cleared cache, rebooted, etc. etc. Nothing works.- Images turn into little blue boxes with a question mark in them. **When this happens, it's an indication that a Certificate box will pop up out of the blue.- Even on Google.com, it will say: Invalid URLThe requested URL "/", is invalid.Reference #9.df260e6b.1336506889.420cf4fSo what can I do? It happens on both my Macbook Pro and iMac - both connected wirelessly to a Linksys router/cable modem. The router is Wireless-N Broadband Router WRT160Nv3 with Firmware Version: v3.0.02.
View 1 Replies View RelatedI recently replaced an old Linksys with a Cisco E3200. All our devices get "stuck" periodically and can connect to the E3200 but not the internet. We power cycle the E3200 and all is fine. But only for a period of time, then we need to power cycle again. The range is less than my 4 year old Linksys was also, devices maybe 30 feet lose their connection even more quickly, forcing more frequent power cycling.
View 2 Replies View RelatedRegion : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
ISP : Comcast
TP-LINK WDR4300 750N Dual-Band router issue.
I started having a problem with a VONAGE V-Portal VoIP adapter losing connection to the Vonage server. I Unplugging the adapter and waiting doesn't solve the problem. The only way I can temporarily fix the issue is to reboot my TP-Link router. Once the router is rebooted the adapter can connect to Vonage. After a few hours it loses connection again. I have set the adapter to use a static IP outside of the DHCP reserved pool. This didn't fix the issue.
I have had vonage for many years and this router for the last 10 months and not had a problem until the past two weeks. Nothing only my local network changed. All of my PC's have no problems with internet access during the time that the Vonage adapter gets an Error 004 (lost connectivity). I still have connectivity with my ipod touch and other internet enabled devices as well. I was using 8.8.8.8 as my DNS server in the router DHCP configuration as well as the static value when I tried using a static IP with the V-Portal. I then switched all system to the ISP (Comcast) preferred DNS servers. The problem still exists. The only way to get the Vonage adapter back to running is to reboot the router.
I should mention I have Motorola Cable modem to a TP-LINK WDR4300 750N Dual-Band router. I have two Vonage vportal adapters plugged into the a couple of the LAN ports on the TP-LINK router. One vportal is my roommates, one is mine. Everything has been working fine for the last 6 months and now one or the other Vportal loses communication through the router, but the other vportal doesn't lose connectivity. It only happens to one of them and it varies as to which one will ERROR out.
My wireless cuts out randomly, sometimes every 5-10 mins and others can be on for hours. I have to go to the network connections, disable the wireless then enable it again for it to work.The wireless icon sometimes has a yellow triangle with a ! in it and sometimes has a red cross over it. This happens when I'm sitting next to the router. I have my PS3 and WII set up to it too and they work fine and they are further away from the router so dont think its that.
View 14 Replies View Relatedim on widows seven and it is a lenovo laptop. It cuts out every minute or so. it say not internet access in my network connections. my router is netgear swell i think. its security type is WPA2-PSK. It mainly happens when i go to play an online game called roblox but also happens when i open up any normal pagge as well. I looked for the WZC but I coudnt find it.
View 1 Replies View RelatedI've been having this problem for several months now and I've tried most of the "solutions" on this forum and many others to no success. This casually varies from day to day and even over the course of a day, sometimes I can go a week at a time without any problem and then other times I'll spend an entire weekend not getting any luck. Essentially my wireless connection will randomly cut out with severely different periods of time inbetween, can happen every few hours or every 10 minutes and as said on different days. Most of the time I have to restart my PC or power cycle to get it to start to work again but also some times It'll automatically reconnect after 5-10 seconds or a few minutes.
As I'm sure you've heard a thousand times this is extremely frustrating when browsing the web or trying to download a large file and constantly being interrupted. My kids who live downstairs and have their own PC's in their room don't have this problem, one is using a wired connection and the other a wireless. As I've stated it only started a few months ago and I've had this PC for a year and a half and the router nor the PC have not changed position in the house or had any drastic changes to either of them.
[code]...
My wireless signal cuts out, but to be clear it doesn't disappear altogether. Instead the signal drops to the point where the connection is useless. I found out by accident that if I disconnect, the signal suddenly shows at full strength; if I reconnect, it works fine, for anywhere between a few minutes and several hours.
View 7 Replies View RelatedI have a wrt160n v3. This is the 3rd one - both the first 2 were defective. I have spent approximately 8 hours troubleshooting the other 2 only to be told they're defective. So, I got a new one. Now, this one keeps cutting in and out. I want as my iPhone constantly switches from 3G to wifi on and over every minute. It really ticks me off! What can I do to fix this? This is a different issue than the original one (very slow) and 2nd (no signal). It's disappointing for a $90 router to do this. I also see the wireless icon on the router flash.
View 6 Replies View RelatedWRT54G v6 router suddenly cuts out several times each day, using it with wired connection on two computers. No problem when direct wired to the modem. Is this router failing? How to fix it?
View 4 Replies View Relatedmy internet connection cuts in and out so my computer cant connect to the router and it wont show up. I am on a windows 7 toshiba laptop and i have comcast as my internet service provider.
View 1 Replies View RelatedTelefonica router (this my internet provider) --> WRT12N --wireless/eth--> my laptop
With that configuration I get a 1Mbps band with But in this configuration Telefonica router (this my internet provider) -- wireless/eth--> my lapto I get 7Mbps.Using always the same port of my telefonica router.Why the WRT120N is not providing the whole bandwidth? Is there any option in the router that divide the whole bandwith (7Mbps, almost 8Mbps) among the four ports of the wrt120n (giving 1Mbps per port)
I purchased this computer earlier today and was excited to get it home and get it up and running. It seemed to run fairly well for the first hour or so but a little while after i began to download League of Legends and games through Steam, the wireless connection became nigh un-usable. It cuts out constantly, and when it is online the speeds are ridiculously slow.
I am typing this from my 4 year old laptop, which is having no issue at all with my connection, roughly 6 inches from where my brand new Dell is, so location surely isn't the issue. I tried closing Steam and just letting LoL finish downloading, but that had no effect. I have turned my laptop off but it made no difference. I have of course tried restarting the router - nothing. I'm very disappointed, since online gaming is the number one reason I chose this PC.
I have two laptops in front of me, running continuous pings to my gateway (router) and to google. One computer pings both targets fine and doesn't time out. The other computer, an Asus G73JW laptop, occasionally times out. This makes browsing annoying because loading websites sometimes times out, network operations (like file copying) times out, etc.
Screenshots:
I've updated my wireless card drivers. During this test, I'm sitting beside my router to minimize distance.
My computer is a HP Laptop Model Number DV2815EA running windows vista 32 bit. Its a few years old. Recently i have had problems with my wireless adapter turning itself off whenever i watch videos online. It doesn't happen all the time, but if i am watching something for more than an hour it will cut off. There is a blue light and a switch on the front of the laptop, and when the wireless adapter is off, the light changes to red.
The light will change to red sometimes whilst watching video, and the only way i can turn the wireless back on is if i restart the system. Even if i activate and disable the wireless adapter using the external manual switch, or the internal controls using the wireless assistant. Also, not sure if this is relevant but i can no longer either watch videos on full screen as the image gets jolty.
Things i have tried:
1) restoring the system to a previous restore point - i tried this but for some reason the only restore points i could find were ones dated after i started noticing the problem.
2) reinstalling the wireless adapter driver and video card driver.
3) running a full 6 hour antivirus scan - I am using Eset NOD32 antivirus and also i scanned using comodo cleaning essentials.
I just signed up for Charter's Ultra 100Mbps internet service. We confirmed it worked at that speed by connecting my Lenovo T520 laptop directly to the Motorola Cable modem. I acheived just over 102Mbps throughput down.Next, I plugged in the e4200 (v1) router to the modem, and the computer directly to that (wired), and the max performance I could see was right around 52Mbps. Wireless performance on wireless-n, 5Ghz, maxes out at around 42Mbps.I am concerned about the throughput dropping from 102Mbps to 52Mbps while directly WIRED to the router. That tells me that the router is definitely capping my throughput. I have turned off QOS, found the optimum MTU of 1468 (used the ping -f -l 1440 [url]...) to find the largest MTU that didn't spit out a fragmented message, and added 28 to that.
I am a bit baffled that this top of the line router which some have claimed to see >100Mbps performance over wireless alone, isn't able to achieve any higher than 52Mbps wired. I do have other devices plugged in, but none actively transferring. What could be capping the throughput? The router worked fine on 25Mbps service, but it seems unable to handle 100Mbps service.
I've got a problem with my new Linksys E1200 (v1) router. It cuts the bandwidth of my PPTP connection with ISP (which is 50 Mbps) down to about 12 Mpbs. My firmware is the latest one (v1.0.03 build 4). I've done some reading and found out that it's pretty common problem between Linksys E-Series routers and ISPs that use PPTP/L2TP.
View 4 Replies View RelatedI did a test to check the speed of my connection with my PS3. First I checked the speed straight from my internet providers modem and I get 18.9 Mbps. Then checked it through the Valetplus router and the speed results are 8.5 Mbps. Both tests were wired in with same cable. Why this happens and if that is common with wifi routers?
View 2 Replies View RelatedIf I connect wire directely to the PC Ethernet port the Internet speed is about 400 Mbit/sec (speedtest.net)When my PC is connected through the Linksys E4200 Internet speed is not above 90 Mbit/sec.
View 1 Replies View RelatedI have a cordless phone which broadcasts on 2.4ghz - when the phone is being used it cuts out the wifi. I thought that with the E2500 being a dual band - I wouldn't have this issue as I thought the router would switch to the 5 Ghz frequency if there was interference on the lower band. Maybe I am not understanding how the dual band works.
View 3 Replies View RelatedI have wrt610n that i have wd 1 tb drive hooked to usb port and when i try to copy large folder/files to it, i get the dreaded- cancel, try again skip and it locks up solid. i have treied all settings in these and other forums. i have tried two different brand size hard drives, i have tried wireless and wired and nothing. is there a fix for this. i have latest firmware on everything, i have everything set tweaked best as they can and not one things makes a differance. all i get from linksys is try this try that. is there a way to copy large files to hd first via the pc then hook back to the router to see the files?
View 1 Replies View RelatedWe are seeing daily erros on our ACS5.4 server like below:
View 1 Replies View RelatedIs there a way to have the router reboot every day automatically? Every few days no one on the network is able to use the internet until the router gets rebooted (which has to be done by unplugging it at that point, since I'm by then unable to connect via the web interface), and having it automatically reboot every day at a time when everyone is usually sleeping would be very convenient.
View 9 Replies View RelatedI have observed a situation where one of our cisco switch 3560 is rebooting daily at periodic times.We have checked the power cables and source everything is fine and still clueless whats causing the issue. [code]
View 13 Replies View RelatedI am running two ASA 5520 routers synched up with eachother. I had a massive connectivity issue this weekend that I am investigating. Now I have figured out how to get the live logging but I need to know how to get the old logs from my router.Also I am looking to set up a log dump that could happen daily or perhaps weekly.
View 1 Replies View RelatedI have a Linksys X3000 router. While it is running, connection latency will gradually increase over about a day until eventually it just stops working at all and I have to power it off and back on again.
Ping times to a local website slowly increase from 30ms immediately after restarting the router, to about 100ms about an hour before it will need to be restarted, then rapidly increase to over 1 second before it drops out completely. When this happens, no connections through the router will work, I cannot even ping it or connect to its configuration web page.
I upgraded the firmware to see if that would work but it didn't. I have had the exact same problems with the 1.0.0 and 1.0.01 versions.
Can I get it replaced? And in the mean time, is there some way to make the router automatically restart at a scheduled time?
What is the best email service that puts a high priority on privacy yet is still easy to use on a daily basis?
View 2 Replies View Related