Wireless :: Wireless And Usb Adapter Connection Failed

Jan 20, 2013

Linksys WUSB300N connected thru powered usb hub frequently freezes with connection failed message

View 1 Replies


ADVERTISEMENT

Enable Wireless Connection Failed

Mar 25, 2011

I manually disabled my wireless network connection and now when I click on enable it says "connection failed"i have windows xp.

View 3 Replies View Related

Linksys Wireless Router :: VPN Connection Failed When Using WRT54GS

Sep 12, 2011

Currently I have Verizon DSL and which supplied me with a Westell 7500 modem/wireless router.  I am also connecting a Linksys WRT54GS (firmware Version: 7.2.08) to the Westell 7500.
 
When I connect via cable or wireless to Linksys WRT54GS I am not able to establish VPN connection. I get the error “Error 619: A connection to the remote computer could not be established. So the port used for this connection was closed”.
 
However, when I connect via cable or wireless to Westell 7500 I am able to connect to VPN.
 
I tried resetting the Linksys WRT54GS to factory settings and reconfigured but no success to VPN.
 
At work we have a Windows 2003 setup with VPN Role on it and on my laptop I am using the built in VPN connection within Windows 7.

View 3 Replies View Related

Netgear WG311V3 PCI Wireless Card - Error Connection Failed

May 29, 2012

So the other afternoon we had a freak power outage, my PC was on and connected to a surge protector. So once the power came back on, literally like 5 minutes later, I rebooted my PC and have had Wireless issues ever since. My PC is custom built with a Netgear WG311V3 PCI Wireless card in it. When I boot up, it tells me I am connectied to our wireless network, but no websites will load. I check for wireless networks but my PC tells me none are in range. I have had this issue before so I goto Network Connections and Disable Wireless Network Connection 2, my wireless card, and then when I goto Enable it I get this error: Connection Failed.

View 9 Replies View Related

Linksys Wireless Router :: Ea2700 Connection To Internet Failed

Dec 31, 2012

went through setup twice, double checked connections, bought new ethernet cable from router to computer, still not connecting. However when i go from my modem to computer i get connected. could i have a faulty router. the router is new from walmart the ea2700.

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Updating Get Failed / Wifi Connection Is Disabled

Jul 14, 2012

The update "failed," due to an "unexpected error."  Wireless connection is disabled, although, as you have probably noticed, I can still connect to the internet (using an ethernet cable from my router to my laptop OSX 10.6.8).  Error Code 3018 is unknown to Cisco's website. Or should I just start over with the installation disk for my E4200 router?

View 2 Replies View Related

Linksys Wireless Adapters :: WUSB54G Wireless Adapter Dropping Connection And Locking Up

Mar 18, 2011

I have a Linksys WUSB54G version 4 adapter.My computer is running Windows XP, Service Pack 3, which is automatically updated at all times. I've been using the adapter for a year with no problems.
 
Suddenly, it's started loosing the connection to the Linksys router and locking up my computer so only a hard re-boot power-down will work.When it comes back up, some or all of my cookies are lost.
 
I've run several different security packages but no virus or other issues have been found.I've uninstalled the adapter and reinstalled it.Last time, following something I read on this site, I installed it without the Linksys software, just the drivers.

View 6 Replies View Related

N Adapter Can't See Wireless N Connection?

Jul 16, 2011

The 802.11n adapter on my sister's computer can't see my 802.11n router broadcast. Sometimes the adapter will see it and then it will connect but then disconnect.

View 18 Replies View Related

PCI Adapter Connection To Wireless N Router

Mar 30, 2011

why i cannot connection my wirekess G PCI adapter to my wireless N router? Is there compatibility issues between B,G, and N equipment? (router and adapter)I have wireless N router, Netgear and Zonet 802.11g wirelss network adapter.

View 2 Replies View Related

No Connection In Windows 7 With Wireless Adapter?

Mar 21, 2012

I have a netgear wna1000m g54/n150 wireless usb adapter. and cannot get it to see my westel at&t network. Adapter is working right in control panel and i can connect to the internet via cat 5 connection but does not see the network with this adapter. Have troubleshoot with netgear and at&t tech's for hours no luck, changed out adapter to a belkin same problem got another gateway and still win7 will not work, something is blocking my connection and gateway checks out and adapter is installed and correcother info to pass on this is very tough and just got the dsl and have not been about to enjoy this desktop with wireless yet hp system bout 7yrs old and working good so any of you have some suggestions that would be beond the norma

View 43 Replies View Related

Wireless Adapter Loses Connection Randomly

Mar 3, 2011

I just bought a linksys AE1000 usb wireless adapter for my desk top computer because there are no phone lines in the room with the computer for me to connect the dsl modem. In the room with the dsl modem there is the Linksys E3000 wirless router. My desktop will randomly lose connection with the router yet other devices that use wifi in the house work fine (ex: ipod touch, android phone, and xbox 360.) i have went through and reset all devices and gave the desk top priority in the network but it hasnt worked. The desktop uses XP.

View 19 Replies View Related

802.11n USB Wireless USB Networking Adapter Keeps Dropping Connection?

Nov 4, 2012

I have an 802.11n USB Wireless Lan card on a desktop with Windows 7 home premium 64-bit. Whenever im searching the web, say i go to NFL.Com to check my fantasy squad, the pages wont load, and i see my connection has been dropped, now every time i click on the signal bars on the bottom right hand corner, it says no connection, but after about 2 seconds of clicking on it, it connects again. So in order for me to get my connection back, i have to click on my signal bar to get it back, which is ridiculous. I have other computers in my home, all of which do not have this problem, so its definitely something in my desktop, i also have about 3 wireless adapters i've tested it on, all of which do the exact same thing on my desktop only. I've also went to power management under configuration for my USB adapter and turned off the ''Allow the computer to turn off this device to save power'', it still drops my connection every 3-5 minutes.

View 1 Replies View Related

DLlink Network Adapter - Wireless Connection Keeps Going On And Off?

Dec 4, 2011

I'm using a dlink network adapter(6 months old) on my pc, have always gotten an excellent signal. Main pc in house is hooked up to dir-615 router & works fine. I had some bsod's recently & decided to reformat xp. I did a reformat back in july because of a bsod from avast antivirus & had no problems till now. An xp repair didn't work this time. Loaded the driver for the adapter, got an excellent signal, but couldn't access the net. The signal shows 4 green bars for about 20 seconds, then all white bars for a few seconds, then back to green. It keeps dropping the signal over & over. The network card shows its working properly. I did an ipconfig, and it says "media state disconnected" & shows no addresses. It has to be some setting somewhere in the pc thats not right & not the adapter thats the problem.The reformat went fine, loaded all the drivers in the right order. I only have IE for a browser which i need to access the net with to load firefox & all other programs plus service pack 3 & other xp updates back on with. When i loaded the driver for the dlink adapter, i used a different workgroup/name than the network name originally used to set up the dlink router if that means

View 3 Replies View Related

PCI Wireless Adapter Constantly Losing Connection?

Jan 24, 2012

Im currently living downstairs from the router. Its in a "secure location." Long story short, the person I live with is very private about the particular room its located in. I know the router is a "N" model Linkys.I installed the software that came with the PCI adapter (NETGEAR N300) and everything seemed smooth, then I constantly kept dropping connection. I then assumed the driver needed updating so I uninstalled the driver and re-downloaded the recommended driver from the netgear website,Things to know:

-I don't do any heavy gaming

-When I disable and reable the PCI adapter driver from device manager I can reconnect to the internet rather quickly.

-When uploading a video to youtube I found the connection to be more stable, but slower. (could of been a coincidence)

Currently I've been running "TCP view" to try to find something in the background taking bandwidth. I searched all the applications that it lists and nothing seems to be abnormal.

View 4 Replies View Related

Wireless Adapter Cannot Find Any Networks - Connection Vanished?

Jul 11, 2011

My internet has been working fine until a few minutes ago, when my connection just vanished. I went to try and reconnect but my Belkin N Wireless USB adapter could not find any wireless networks to connect to. While searching for a connection, the light starts blinking like it is searching, but then it says that it can't find any. Also, when I plug in the adapter, a popup comes up saying that there are wireless networks nearby, but when I click it there are still none.

I've tried reinstalling drivers but still nothing. I'm not sure what else to try because I'm afraid I might mess something up even more.

View 13 Replies View Related

Internet Connection Is Terminated 30 Sec After Installed Tp-link Wireless Adapter

Aug 18, 2011

i just bought and installed tp link wireless G usb adapter TL-wn422G.

i was tring to connect to the internet but after about 30 second the connection to the internet was terminated, and i need to unplug the device and replug it , in order it will work again (for about 30 seconds more).

i have an edimax router and all my other devices are connect perfectly (laptop, iphone , galaxy s)

View 6 Replies View Related

Wireless Connection Connected With Medialink 54mps Usb Adapter Low Packets

May 13, 2011

I had to recently reinstall windows xp, I have upgraded to service pack 3 by pluging into a wired connection downstairs, I was given a media link wireless usb adapter, It was working fine before I had to reinstall. Now it will connect to my network but the packets are low 1-16 and I can not access the internet.

View 13 Replies View Related

Compaq Presario CQ57 - Wireless Adapter Will Not Hold A Connection?

Feb 6, 2012

My wireless on my computer won't hold a connection for any longer than 30 minutes. I've checked the drivers, the wireless router, and scanned for viruses (several times) but nothing seems to work. In the last three months, I think I only had one occasion where the connection remained stable for longer than an hour. It doesn't matter what router I use or where I am. It has to be my computer.

I have a Compaq Presario CQ57 and I have had it for about 6 months.

View 1 Replies View Related

Rosewill RNX N300X Wireless Adapter / Connection Drops To 1 Mbps

Jun 29, 2012

I have a Rosewill RNX N300X wireless adapter that keeps dropping to 1 mbps, and only goes up to about 18 mbps on a good day. How can I force a 54 mbps connection?

- I am running the latest drivers for the card.

- The network is "g", card accepts b/g/n.

- Another computer running RNX N360PC is getting a perfect connection on the same network.

View 4 Replies View Related

Netgear WNDA3100v2 Wireless Network Adapter Will Not Maintain Connection

Sep 23, 2012

I'm using is the Netgear WNDA3100v2.What happens is when I attempt to connect to the internet I have to reset the adapter multiple times before it even recognizes my internet. And then once that happens it takes a few more tries to actually connect. And when I'm connected the speed is fairly decent (around 15-30 Mbps). Problem is, every 5 minutes maybe even less, I disconnect. Then I have to go back through the process of restarting the adapter and whatnot until I reconnect. I've been dealing with this problem for a few months now and have neglected to post about it anywhere because I didn't think it to be this unique.

I have tried just about every other "solution" I could find on the problem and none have worked. Also, if this says anything, I have a laptop setup literally 1 foot or less from my desktop and it connects perfectly well and good using the same adapter. Also I recently purchased another adapter (Linksys AE3000). I figured this might solve my ailment but of course, the same thing happens as the Netgear, except possibly worse. And that adapter works fine on the laptop as well. I also just yesterday completely reformatted my computer hoping it would work, but of course didn't. [code]

View 8 Replies View Related

Gateway NV53 Notebook Lost Connection To Wireless Adapter?

May 15, 2012

My Gateway NV53 laptop has suddenly lost the ability to connect wirelessly to any network. Ethernet connection works fine. Wireless light is turned on, but laptop does not "see" any wireless networks. It is as if the wireless adapter is no longer there. It does not show up in Device mgr.

View 3 Replies View Related

Linksys Wireless Adapters :: WUSB54GSC Adapter Dropping Net Connection

Feb 23, 2011

I'm using the WUSB54GSC on a IBM Desktop computer, not old, but not new by any means.  We have wireless internet through Comcast, and my room is on the second floor.  The router is on the first floor, but it's almost just underneath my room.  The internet seems to connect completely fine, but it will disconnect at some things.  For example, when I tried to go to mapquest, it was like it was flooding, and it dropped the internet connection.  I also play games online, and when I play the actual game itself (GTAA/Online) it plays just fine, no lag, nothing like that, but when I try to connect to Teamspeak, when it's loading the channels after it connects, it just drops the connection..

View 1 Replies View Related

Atheros AR9002WB-1NG Wireless Network Adapter / Laggy Internet Connection?

Jan 27, 2012

Recently the wireless internet connection on only one of my laptops is really laggy. By laggy I mean that usually the connection is ok, 20mbps, but like once in a couple of minutes the connection slows down to like 3mb for a minute or so ( Speedtest.net - The Global Broadband Speed Test) and when it does the connection becomes really slow. This is very annoying when browsing the internet or playing online games, because it causes connection losts, and slows down loading webpages etc. The problem has to do something with my laptop because on my other (wireless) laptops and the wired PC these problems don't occur. The problem also occurs when no other PC is connected to the network.My laptop is an Asus K53SV and my wireless adaptor is an Atheros AR9002WB-1NG Wireless Network Adaptor. My ISP is UPC (The Netherlands).

View 8 Replies View Related

Configure Desktop To Get On Neighbors Internet Connection With Netgear Wireless Adapter?

Nov 13, 2011

How do I configure and set up my desktop to get on my neighbors internet connection with the netgear wireless adapter.

View 3 Replies View Related

Linksys Wireless Adapters :: AE3000 Adapter Network Connection Failure

Feb 27, 2013

I just purchased 2 AE3000 adapters to update my wireless network and cannot get either of them to connect to my wireless network through either of two computers I tried. It hangs for a while looking for address and then I get the 'limited or no connection' note. But yet when I plug in my old AE1000 adapter into either computer I get connected right away. I've looked under the device manager and it shows up there, the LED lights come on and I see my wireless network show up on available networks. I am using the windows wireless manager in lieu of the Linksys one and as such I don't think any specific drivers are being used. I bought two updated adapters to start with is to keep current and NOT have problems.
 
XP Pro SP3
WRT350N Router

View 6 Replies View Related

Dell :: Inspiron 8200 Wireless Connection Adapter Will Not Stay Connected

May 14, 2013

I have a Tenda router and Realtek USB wireless adapter.  My 8200 has XP svce pk3.  The adapter will not stay connected. Some times it shows connected with 100% signal strength and after few seconds drops out.  I cannot find any radio switch on this laptop.  Fn/F2 does not work and there is no mention of wireless in the bios settings.  I feel that the radio is not switched on but how do I do this??  Is my configuration incorrect?

View 3 Replies View Related

Cisco Security :: Dell Latitude D820 - Reason 442 / Failed To Enable Virtual Adapter

Feb 5, 2007

I've installed version 4.8.02.0010 of the VPN client onto a Dell Latitude D820 laptop. When I attempt to connect, I get this message. There are no firewalls running (I disabled the Windows XP firewall) and I'm running under Service Pack 2 with all of the latest security patches from Microsoft.
 
I even tried un-installing the client and using an older version (4.8.00.0440) and it reports a similar error in the Log file.
 
I'd prefer to NOT have to wipe the laptop and reinstall the O/S if I don't have to. This is the only laptop that I've experienced this problem with but it's also the first Dell Latitude D820 that I've attempted to install the client on.
 
Is there a problem with the Dell Latitudes and the VPN Client? Is there another way around this other than a wipe and re-install?

View 3 Replies View Related

Link To Broadband Connection Failed?

Jun 24, 2011

I have problem with my system. my system is Windows 7 STARTER. When i am using internet, every time the message is showing "Link to Broad Band connection failed - reconnect pending............" like that message is comming.

View 2 Replies View Related

Cisco VPN :: VPN Version 5.0.07 Failed Connection

Aug 29, 2011

For quite some time now, we have been experiencing an issue with the Cisco VPN client that will make the client completely unusable. I have noticed that when a specific feature of Symantec Endpoint Protection is enabled, it will (about 25% of the time) cause the following errors to appear when attempting to connect anywhere with the Cisco VPN client. Once this error happens once, the VPN client then becomes useless. 

Error #1
Reason 414: Failed to establish a TCP connection

Error #2
Reason 440: Driver Failure

Error #3
Reason 442: Failed to enable virtual adapter 

It seems that fixing one error will cause the other error to come up.I have tried reinstalling the client with the same version and older versions and the issue still comes up. All users in the company are using Windows 7 64-bit with SP1 installed.The oddest thing about this is that all employees in the company have the same antivirus with the same features enabled, however, it only happens to a small percentage of employees.

View 3 Replies View Related

Connection Failed - Firewall Errors Detected

Jan 14, 2013

Problems connecting to different services and an online game. Examples:

1.) "Connection timed out" in Teamspeak 2. (debug log not really yielding much useful information).

2.) Torchlight 2 reported "Connection failed - Firewall errors detected."

- almost all other online applications work just fine (including voice over ip and games) What I've tried (without any success):

1.) I could connect in either case using my old laptop! Thus it works on a different computer, from the same network, at the same/similar time. Thus I concluded it must be somehow related to this laptop (its a new laptop).

2.) The TS2 server & entered information is 100% working, same applies to torchlight2 - also latest updates installed and of course the game is totally legal.

3.) Windows firewall: all the mentioned programs are on the allowed list. Also check whether its correctly set to "home network". Futhermore I also tried disabling the windows firewall entirely.

4.) No other firewall program in use.

5.) Check all programs I know of which might be related to network traffic (e.g. Qualcomm Atheros Killer Network Manager - disabled it).

6.) Tried both, wireless and ethernet cable connection.

7.) I even tried running the game, torchlight 2, via Tunngle (explained in a layman's words: a program that simulates Lan over the internet).

Some Information about my system:Its a new laptop. Network card is labled as "Killer e2200 PCI-E Gigabit Ethernet Controller.Runs Windows 7 and did start out empty: i.e. I installed every single program running on the machine and as far as I know none of them should have anything to do with network. Virus scanner is the lastest version of AVG free (no firewall included).

View 8 Replies View Related

Cisco VPN :: ASA 5510 Ssl - Connection To Server Failed

Jul 5, 2011

i have an ASA 5510, i configured a ssl portal acces for my company. it used to work. now, it's still half working : 1/ i can connect to the web ssl portal page with the AAA acces (login and psw) 2/ but after, it's no more possible to access at corporate web pages, like intranet, always the same message : "connexion failed - serveur xxx not available". See the attachement.
 
i watched logs, my packets are dropped but i don't know why.

View 0 Replies View Related

Aspire 5315 Laptop Connection To WLAN Failed?

Feb 13, 2011

I have a Aspire 5315-2153 Laptop with windows Vista Home.I cannot connect to my wireless anymore. When tries it says Connecting to 2wire296 please wait -- Then it says Conection to WLAN Failed.I am able to connect with my ethernet wire connection just not wireless.I did IPCONFIG/ALL and here what came up.

Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all[code].....

View 4 Replies View Related

Failed To Query TCP / IP Internet Connection Settings On Laptop

Dec 14, 2012

I have a Compaq Evo N610c with XP Professional version 2002 SP3 that cannot connect to my internet connection. Has error that failed to query TCP/IP of the connections setting.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved