I have problem with my system. my system is Windows 7 STARTER. When i am using internet, every time the message is showing "Link to Broad Band connection failed - reconnect pending............" like that message is comming.
View 2 RepliesSetup and Hardware D-link DSL-502T Belkin N Wireless Router (No wired connections) Computers on wireless Connections
No.1 Connected to the Belkin & Internet working
No.2 Connected to the belkin & Internet NOT working Tenda W322P Wireless PCI adapter installed OS - XP SP2
When I attempt to connect to the internet on computer No.2 it will not connect.
1. Belkin setup page shows both computers in the DHCP client list
2. Tenda shows connection to the personal network
3. No internet connection icons in the tool bar. There is an internet connection icon on computer No.1 showing two computers and a bubble.
4. No icons in 'Network Connections'
5. In 'My Network Places' there is a Belkin Icon but when properties is clicked it says "This item is not currently on your network".I may have accidentally deleted icons from network connections or some of the associated folders.
I have internet thru Century Link (DSL). I also have a Netgear N-300 wireless router. My computer is 4 years old and is an HP with a G wireless adapter buit-in. Until yesterday, my provided internet speed was up to 7mbps. I received the same speed regardless of whether my computer was plugged in directly to the modem (1), plugged directly into the router (2), or wirelessly. We just upgraded our internet to 40mbps. Now, I get the 40 mbps when my computer is plugged into the modem or router, but wirelessly I only get about 4 mbps, 1/10th of what I get with wired.
View 3 Replies View RelatedHalf of the time i have to stay at hotel due to business trip. The hotel i stay will provide free internet broadband with cable but no WIFI. Can i set up WIFI if i have router?
View 2 Replies View RelatedHow to share reliance broadband connection between two pc's using hub or direct line in one computer have windows 7 ..
View 1 Replies View RelatedI'm trying to set up my DIR-835. I keep getting "Authentication failed".
View 4 Replies View RelatedWhen I try to log-in to my D-Link DIR-835 Router using IE9, I get an 'Authentication Failed' error. FireFox & Chrome work just fine. what I need to change or fix in IE9 so it will also log-in to my router?
View 13 Replies View RelatedBought a new DIR-655 Rev B a few weeks ago.It's web admin interface has failed in some way. The device is still passing all user traffic in both directions, but attempts to connect to the admin interface with my web browser, from both the wired inside and the WAN outside fail. I can telnet to the actual tcp port number that it's configured for and establish a connection, but I can't get any response from it. At this point I'm expecting the only way I'm going to clear the condition is to power cycle the device when I get home from work. It is to note I have the device configured for https for the admin interface. Perhaps that's the more 'advanced' feature that's newer and is exhibiting some kind of bug, I wonder. I'm running the latest firmware available from D-Link.
View 5 Replies View RelatedI manually disabled my wireless network connection and now when I click on enable it says "connection failed"i have windows xp.
View 3 Replies View RelatedFor quite some time now, we have been experiencing an issue with the Cisco VPN client that will make the client completely unusable. I have noticed that when a specific feature of Symantec Endpoint Protection is enabled, it will (about 25% of the time) cause the following errors to appear when attempting to connect anywhere with the Cisco VPN client. Once this error happens once, the VPN client then becomes useless.
Error #1
Reason 414: Failed to establish a TCP connection
Error #2
Reason 440: Driver Failure
Error #3
Reason 442: Failed to enable virtual adapter
It seems that fixing one error will cause the other error to come up.I have tried reinstalling the client with the same version and older versions and the issue still comes up. All users in the company are using Windows 7 64-bit with SP1 installed.The oddest thing about this is that all employees in the company have the same antivirus with the same features enabled, however, it only happens to a small percentage of employees.
Hardware version: A4, Firmware version: 1.35NA.
The device is working just fine but I just want to change the password but it failed. I opened my web browser enter 192.168.0.1 then logged into the admin account then put in the new password for both admin and user, clicked save setting...it asked for rebooting the device I let it rebooting. Everything went fine. I was able to log in both the admin and user acc with the new password. The only problem is that my PC can still connect to the network using the old password? I expect that the PC will need to use the new password to access the network but this is not the case.
Problems connecting to different services and an online game. Examples:
1.) "Connection timed out" in Teamspeak 2. (debug log not really yielding much useful information).
2.) Torchlight 2 reported "Connection failed - Firewall errors detected."
- almost all other online applications work just fine (including voice over ip and games) What I've tried (without any success):
1.) I could connect in either case using my old laptop! Thus it works on a different computer, from the same network, at the same/similar time. Thus I concluded it must be somehow related to this laptop (its a new laptop).
2.) The TS2 server & entered information is 100% working, same applies to torchlight2 - also latest updates installed and of course the game is totally legal.
3.) Windows firewall: all the mentioned programs are on the allowed list. Also check whether its correctly set to "home network". Futhermore I also tried disabling the windows firewall entirely.
4.) No other firewall program in use.
5.) Check all programs I know of which might be related to network traffic (e.g. Qualcomm Atheros Killer Network Manager - disabled it).
6.) Tried both, wireless and ethernet cable connection.
7.) I even tried running the game, torchlight 2, via Tunngle (explained in a layman's words: a program that simulates Lan over the internet).
Some Information about my system:Its a new laptop. Network card is labled as "Killer e2200 PCI-E Gigabit Ethernet Controller.Runs Windows 7 and did start out empty: i.e. I installed every single program running on the machine and as far as I know none of them should have anything to do with network. Virus scanner is the lastest version of AVG free (no firewall included).
i have an ASA 5510, i configured a ssl portal acces for my company. it used to work. now, it's still half working : 1/ i can connect to the web ssl portal page with the AAA acces (login and psw) 2/ but after, it's no more possible to access at corporate web pages, like intranet, always the same message : "connexion failed - serveur xxx not available". See the attachement.
i watched logs, my packets are dropped but i don't know why.
Region : Egypt
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_120523
ISP : Etisalat Egypt
TL-MR3420 failed to detect " ZTE MF190S " Egypt Etisalat USB Dongle, and the file for the attached model can't be found on the 3G Modem Bin File Center.
I just downloaded and tried to apply the latest Firmware update to my dcs-930l. It failed or timed out. Now the camera is unusable. I tried the hard reset, several times, holding it in for 10 seconds after 3 seconds did not work. I held it in for 3 seconds, waited 1 minute, and just got a flashing red light. I did the same thing after holding reset in for 10 seconds. I have unplugged and replugged in the network cable on both ends several times and turned the power off and on on the router and camera several times. The camera only blinks with a red flashing light. Is it a brick now? Is there any other magic tricks to try?
View 7 Replies View RelatedISP Virgin Media who ship DLINKS without any assistance for custom options, I seem to be having no end of trouble trying to get my DLINK615 and Xbox to play fair.In order to allow me to play my Xbox without any technical problems, or problems with other players I had to open up a few ports, been there resolved that. But, I only want to open them on one IP I want to always be assigned to the Xbox360. This IP being 192.168.0.100
I added that into the DHCP Reservation list, only to find that the Xbox failed to reconnect after being turned off and back on, I believe this is a problem with the DLINK Router, unless I am very badly mistaken.
I have a Aspire 5315-2153 Laptop with windows Vista Home.I cannot connect to my wireless anymore. When tries it says Connecting to 2wire296 please wait -- Then it says Conection to WLAN Failed.I am able to connect with my ethernet wire connection just not wireless.I did IPCONFIG/ALL and here what came up.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all[code].....
I have a Compaq Evo N610c with XP Professional version 2002 SP3 that cannot connect to my internet connection. Has error that failed to query TCP/IP of the connections setting.
View 1 Replies View RelatedCurrently I have Verizon DSL and which supplied me with a Westell 7500 modem/wireless router. I am also connecting a Linksys WRT54GS (firmware Version: 7.2.08) to the Westell 7500.
When I connect via cable or wireless to Linksys WRT54GS I am not able to establish VPN connection. I get the error “Error 619: A connection to the remote computer could not be established. So the port used for this connection was closed”.
However, when I connect via cable or wireless to Westell 7500 I am able to connect to VPN.
I tried resetting the Linksys WRT54GS to factory settings and reconfigured but no success to VPN.
At work we have a Windows 2003 setup with VPN Role on it and on my laptop I am using the built in VPN connection within Windows 7.
We saw this syslog on ASA5585 with version 8.4(1). I have two HA firewall pairs (contains 4 ASA5585, active/standby), and I saw this message on the standby ones.
Jun 7 07:36:26 10.99.96.32 last message repeated 4 times
Jun 7 07:36:26 10.99.96.32 :Jun 07 07:36:26 HKST: %ASA-ha-3-210005: LU allocate connection failed
[Code]....
I have a Studio Xps435MT connected to the internet through a 2Wire DSL modum using an ethernet cable. Installed a new hard drive last week after drive failure, Reinstalled Dell drivers and utilities using disc, then operating system, software, updated drivers, installed SP2.
Internet connection worked fine since then. Yesterday and from then on, Windows and modum will not recognize network adapters so not internet availability although device manager shows them working. Modum does work with my laptop so I can access internet through that.
Network and sharing shows unidentified network and limited connectivity IPv4 and 6, on IPv4 no default gateway or DNS server identified, no IPv6 gateway. Tried reinstalling modum but shows no network adapters identified.
Windows system info shows that intel 82567LF 2GB connection installed and reset today, default IP gateway not available.
Customer is running ASA 5550 with software 8.2.5 version.
They continously get the below messages
%ASA-3-210005: LU allocate connection failed
%ASA-3-210007: LU allocate xlate failed
I have already searched in the forums and also BUG toolkit, These issue has either been resolved in prior relases or in 8.4 .x train. I didnt find any bug which says that it has been found in 8.2.5 release.
I have also run "show conn count" and "show xlate count" I see these is difference in count output.
From Standby
COGINBLRMBPB1INTF1# show conn count
6097 in use, 17220 most used
COGINBLRMBPB1INTF1# sh xlate count
[Code].....
I am having Cisco 3845 series router with c3900-universalk9-mz.SPA.151-4.M2.bin IOS . I want to install new Licence on it for DATA. When i am trying to install licence on it i am facing the error "% Error: License installation failed with error: XML parsing failed".
View 4 Replies View RelatedI've tried to upgrade firmware through chrome, but chrome abruptly shut down during upgrade.Since that, I have not even loggin set-up menu which should be shown up putting 192.168.0.1 to make it back. Amber light is just blinking on Power lamp.
View 2 Replies View RelatedWhen i tried to play back my video this error message appear:
Get data from database failed.i have a few date in my database. I can only playback the video for half of them which is the older one.How to repair them?
Region : Hongkong
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : 123
In order to use public IP provided by the ISP, I have to enter the specific APN.It's however no matter what I type in the field of the APN, the router is still connected to the default APN settings from ISP.I have tried typed wrong string in the field of APN, the router is still connected to the default APN successfully.
first one had to get rid of because just wouldn't work with a 3CX server, anyway, I have a DIR-655 A4 factory shipped with 1.32NA I am trying to update the firmware to 1.34NA but it will not let me. It keeps saying Code:
View 6 Replies View RelatedRegion : UnitedKingdom
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : 3-14-4 to 3-15-4
ISP : Primus Saver
I had it all working fine, then I wanted to upgrade the firmware. The original firmware was 3-14-4. I downloaded and applied the 3-15-4 firmware. Now when it powers on the power light is on all the time. Immediately the sys, 4, 3, 2, 1, Internet, usb and wps lights flash once. Then about 5 seconds later the 4, 3, 2, 1 & Internet lights flash once, then a second later the cycle starts again. When I connect it to the PC it starts to make a connection on the NIC, but then the router resets. Model: TL-WR1042ND, Ver 1.3 . Is there a way to reset the firmware or get it working again?
I upgraded the firmware per one suggestion, but no difference.I am going thru the setup wizard with ethernet cable attached. I want to use them wirelessly so I clicked wireless setup, and entered my network info. At that point I get an error message saying it failed to save settings. I know the ID and password are correct.I have tried exiting the setup wizard and accessing the camera thru the web interface. All wireless settings are correct. The camera works FINE on web browser, myDlink, and even my iPhone app as long as the ethernet cable is attached.Other wireless devices have no trouble connecting to my router. Is there some setting on the router that can be preventing the connection? I've done some trial-and-error changes, like different ports and enabling/disabling UpNp on both camera and router.Oh and almost forgot to mention.I did call tech support, which was a joke. Some foreign lady was reading off a script that told me to reset, unplug, reboot everything. Then she gave me a case# and said upgrade the firmware.
View 11 Replies View RelatedHad just purchased a new DCS942L unit and had it setup fine. Registered it on the web and the web stated that it needed a firmware update. Connected with hard line and started update. After 5min webapp said device timed out. When I went to rest camera could no longer get a connection of any kind.
View 1 Replies View RelatedSo the other afternoon we had a freak power outage, my PC was on and connected to a surge protector. So once the power came back on, literally like 5 minutes later, I rebooted my PC and have had Wireless issues ever since. My PC is custom built with a Netgear WG311V3 PCI Wireless card in it. When I boot up, it tells me I am connectied to our wireless network, but no websites will load. I check for wireless networks but my PC tells me none are in range. I have had this issue before so I goto Network Connections and Disable Wireless Network Connection 2, my wireless card, and then when I goto Enable it I get this error: Connection Failed.
View 9 Replies View Relatedwent through setup twice, double checked connections, bought new ethernet cable from router to computer, still not connecting. However when i go from my modem to computer i get connected. could i have a faulty router. the router is new from walmart the ea2700.
View 1 Replies View RelatedRegion : Italy
Model : TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP : Alice (Telecom)
I bought some days ago Tp-Link Wireless Router (Model TL-WR740N - 150 Mbps - Ver 4.23) but I couldn't install it: when I do Easy Setup Assistant, the network status test always fails because of absence of connectivity. I can see that there are some problems by the lights of the router: the WLAN light switches on, as the WAN light and the LAN light, instead of being flashed. I tried to do the installation without cd but, clicking on 192.168.1.1, I didn't find the page to access to web console but the Telecom page of the status of my connexion (nb: it reports that ethernet is unplugged).