I have a home PC Windows 7 desktop and a Linksys WRT120N wireless router for another computer currently. I need to add a VPN and a desktop work computer (XP) to the above.
View 2 RepliesI have an HP SR2170NX desktop set up via DSL and cable to an ATT gateway router that enables wireless for my roaming with my laptop. The laptop works wirelessly even when the cable between the router and desktop is unplugged and the desktop turned off. I would like to equip the desktop with a Cisco-Linksys WMP54G Wireless-G PCI Adapter or similar PCI-card to allow for elimination of the cable between the router and the computer.
View 2 Replies View RelatedI just installed an older router (WRT120N). Purchased an adapter for desktop and wireless connection for destktop works. Cannot get other devices to use the wifi (iphone, ipod, android phone...). I am at a loss. Saw some suggestions about disabling a Upn or something under the router's LAN properties
View 1 Replies View RelatedAt home, I have two desktops (bedroom and living room), a bedroom printer, and a WRT120N router. The bedroom desktop is connected to the WRT120N route and the printer is connected to the bedroom desktop. The living room desktop is connected to the WRT120N route. I can print from the bedroom desktop, but cannot figure out how to print from the living room desktop.
How can I print on the bedroom printer from the living room desktop?
I have a WRT120N and have been trying to set up priorities using the QoS under the tab Applications and Gaming. Everytime I "Save Settings" it does not save. It refreshes the page and deletes everything I just set up.
I did Live Chat and they told me it was my router. I returned it and got another one... Same problem
Putting this router back in service, I reset (10 and 30 sec hold) until lights flashed. Unplugged it. Came back and connected to computer. Used default u/n = blank and p/w = admin -- doesn't work, can't get to control screen. Tried various combinations and still won't work. How do I get router to respond?
View 9 Replies View RelatedI have a Desktop wired to my WRT120N. With this router being a wirless one, we have other devices (2 laptop and 2 iPads) conected to the internet via WiFi.The thing is, whenever I play an online game (specifically, League of Legends) my ping skyrockets whenever they use the internet.Is there a way for my PC to take priority in bandwidth over theirs? Or at least some way for my game to take priority over theirs?
View 4 Replies View RelatedWhen I start my torrent client (deluge) in short time computer disconnect from router. My I need to configure some settings on my wrt120n?
View 6 Replies View RelatedBefore, I can access admin panel of router via 192.168.1.1 on any computer, be it wired or wireless.This time, I can't anymore.This time, I can only access admin panel on 1 computer only. The computer in which it's directly connected to the router, wired. All other computers, connected to a switch, which the switch is also connected to router, can no longer access admin panel.I can still open 192.168.1.1 with a username/password prompt but I can't log in. It's like it's always wrong password. Same with accessing from laptop (wireless).Before, I can access admin panel from any computer (wired), even from laptop (wireless). There are times that I have to restart router in order to fix my internet connection. Only this time, I have to access it from the computer that's directly connected to router (wired).How do I revert it back so that all computers will be able to connect to admin panel of router?I have just finished upgrading firmware from 1.0.05 to 1.0.06 but I still have the same problem.
View 5 Replies View RelatedI just bought a WRT120N and at different times it will randomly restart and disconnect all the computer on my network I have 4 wired devices and 4 Wireless devices.
View 9 Replies View RelatedI have DSL on my computer which runs windows 7, using verizon's Westell model 7500. My wife's desktop computer in another room runs windows XP. I purchased a new Linksys USB adapter model N600 which includes an installation disk for her computer. My question: How do I get them to work together so she also has internet connection for her email, etc???
View 2 Replies View RelatedFirst time VPN newbie. I need to set up vpn for a friends small business using RV082 so, as a test, I set it up here at my home using a very basic config. The network topology looks like:
cloud => cable modem => RV082 => DIR655 => win7 PC
At a remote site, I fire up QUICKVPN, enter necessary data and successfully connect. Bring up Remote Desktop and put in the IP of my home pc and the logon username and, after a minute or two, it says "unable to connect to the computer" (or words to that effect). My home PC has been configured to allow remote desktop connections and this has occured in the past but not since the RV082 installation. There is nothing in the PC's logs nor in the RV082's logs.
I have a new E1200 router. I VPN from home to my work computer just fine. since I can remotely access the router from work...what setup section of the router would I need to utilize to go backwards and access my home PC thru remote desktop? NAT? if so what are the instructions to do so.
View 1 Replies View RelatedI have a Cisco WRT120N Router and a Cisco Valet AM10 wireless adapter. Almost every time the computer reboots, I loose my network and I have to redo the AM10 setup. The AM10 is the only device that loses the connection, my lap top and printer do not lose the connection.
Problem 2: Everytime I upplug and replug the AM10 a window pops up saying I need to check the drive for errors but none
are found.
Problem 3: I downloaded the AM10 install program, Downloadable.Setup.AM10.1.2.10148.2. It does not work. If I try to run it Iget an error message that the setup canot be completed and to call in for support.
Problem 4: When I can get it working is shows that it is Wireless Connection 5. Why 5 and not 1? Where are the other 4?
<script id="overlay_tmpl" type="text/html">// <div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> // </script>
I bought a Linksys E1000 wireless router a year or so back. it was loaded onto a computer that no longer works. i have the router and the box but no disc or manual. My laptop and ipad are working fine with the router but i can't get my iphone hooked up and dont think i have the correct password. I dont have any software on my laptop to even figure it out. What can i do to get my phone to use the router?
View 1 Replies View RelatedHave just been trying to install Remote Desktop between two XP pro laptops When I try to log on I get a black screen with the connection bar at the top with the name of the remote computer and after about thirty seconds it drops the connection. The remote laptop comes up with logon screen but it isn't visible on the on host machine.I have followed all the instructions including file sharing enabled remote accesss etc, Both machines show up on network map and can ping each other.
View 2 Replies View Relatedi have just brought a tp-link 5 port desktop switch my p.c works but my ps3 dont
View 1 Replies View RelatedSo, my desktop, running windows 7, can no longer connect to the internet. It has no problem connecting to the router, but it will not receive packets. I double checked my connection using my laptop and it works with wireless and wired connections, so I know it's something with my desktop. I would really like to avoid doing a reinstall, I don't have anywhere to back my data up to.
View 5 Replies View RelatedI can't get a wireless adapter to work on my newly purchased desktop. Tried 2 different brands, same result: After installing drivers, resetting wireless router etc. the wireless connection sometimes shows up but can't be connected to. I used:
1) TP link wireless adapter
2) Netgear N600 wireless dual band usb adapter.
The netgear one I'm using right now just says, "scanning" constantly. Here's diagnostics:
Host Name: MININT-SNNBPV2
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
[Code]....
I own a dell demension 8300 OS Windows xp Professional. What would be a compatiable wireless adapter for my desktop pc?
View 1 Replies View RelatedI have been having a peculiar problem lately with my wireless set-up. I have a very simple and standard setup.My main desktop pc is connected to my TP Link TL-WR841ND wireless router and that is connected to my issued Time Warner cable modem. In my room I have a desktop pc with a TP Link TL-WN722N wireless adapter and my brother has a PlayStation 3 in his room.For months I have had flawless wireless internet connection between my desktops and PlayStation 3, but for the past few days I noticed that when the main desktop is on it prevents my adapter and PlayStation from making wireless connections to the router.
The only time my desktop with the adapter and PlayStation 3 is able to connect is only when the main desktop is turned off or physically disconnected from the router. Now, I have tried uninstalling and reinstalling the Ethernet driver, resetting both the modem and router, and setting everything up from square one to no avail. I know it has to be something simple but I'm hoping I won't have to format my main desktop PC.
When I log into the routers configuration page through internet explorer and check the Wireless Statistics page showing the currently connected wireless stations and packets, I have noticed that very few packets are being sent out, like the adapter and PlayStation 3 are being blocked by the desktop. I had Norton installed on it a week or two ago just to do a quick scan, then I uninstalled it.
I have a current issue with my 2008 R2 machine.I cannot get Remote Desktop to work. Client machine is Windows 7 Ultimate, windows firewall on the Server machine is disabled, Telnet to port 3389 works (as in, it doesn't error out it gives me a blank screen), the account I'm trying to login to is the only account on the machine (Administrator). Remote Desktop service is installed and set to allow connections on the less secure mode.
View 19 Replies View Relatedi have a hp cpu and i want to use my Clear wfif to connect to the internet. I was told that I need an adapter for a CPU to use the Clear signal. I was told that the wifi is really for laptops with built in adapters that cpu's don't have. best adapter to use for my application.
View 1 Replies View RelatedI'm trying to use RDC to connect to my home PC from work. I've tested everything on my laptop from another network and the connection works fine but the same settings don't seem to work when I'm at work.
I'm pretty sure I have everything set up correctly. Using the default port forwarded to the desired computer.
Have wireless laptop and have belkin router.problem is desktop computer is not wireless.what do I need?
View 1 Replies View RelatedA couple of days ago I bought a new desktop PC (Here is the link if anybody wants info on the PC [URL] but anyway, I'll get to my problem. My wireless router is downstairs in the living room and my desktop PC is upstairs in the bedroom. Theoretically, My PC's wireless card should be able to reach the router perfectly, being as I have several other PC's in the house that I use from my bedroom and the connection is 'Very Good' to 'Excellent'. Although with this new computer the connection's strength is very weak and it's so slow using the internet or trying to download things. It's internet is almost unusable. I've tried swapping the wireless card, but to avail. The connection is still awful.
Or of a way to boost the signal of my wireless card?
I am trying to use my computer running Windows XP Home to remote desktop into my computer running Windows 7 Ultimate over the internet.The computer I am trying to connect to is listening on port 3389, has all sort of firewall exceptions sorted and is enabled to accept remote connections. The computer I am trying to use to connect has no firewall currently (I have disabled it just to get this working).
And yet when I try and connect using the ip address of the host computer I receive the message "remote desktop cannot connect to the remote computer for one of the following reasons"... and so on.
My computer says it has built in Wi-Fi. Do I just need to buy a wireless router or do I need a wireless card? Also my son wants to buy a small laptop. Do I need to let my cable company know I am going wireless? If I have wireless in my home will he be able to connect to internet. New to this wireless thing.
View 1 Replies View RelatedHow to Connect a Laptop to desktop computer With LAN?
View 1 Replies View Relatedi cannot connect belkin to my desktop computer...
View 1 Replies View Relatedi put the dlink disk in the second computer to install the router and i followed the instructions and i connected the computer to number 2 on the router cause my other computer is connected to number 1. when i tried to sign onto the internet nothing happened and i got a message on the toolbar at the bottom of the screen saying something like local network cable unplugged.
View 14 Replies View RelatedI just got a new internet connection after going for 2 years or so without one here at home, now that i have it and got the router installed and all my main computer a desktop (HP Pavilion a6655f Desktop PC) has not been able to connect online using my laptop i've had no problems but would really like to get my desktop online as well, I have tried the windows diagnostic tool tried resting the adapter but that has not worked.
View 9 Replies View RelatedI seem to suddenly be completely unable to access the internet on my desktop computer.
View 14 Replies View Related