how can i check if my netgear N300 adapter wna3100 is compatible with apple tv device I was told that I needed a dual band router to play HD movies from itunes (ipad)
View 2 Replies
OK, so what is going wrong, I just bought this new HP computer windows 8 on Sat, have hooked up my net gear N300 WNA3100, and still can't get on line, and it was working fine on my windows XP machine, but it was 7 years old, and giving me trouble, and my WNA is less than 9 months old, so where do I go from here,
View 1 Replies View RelatedI bought a Netgear WNA3100 wireless adapter today but when connecting, it says limited access after entering the SSID and the passphrase. I currently have windows 7.
View 2 Replies View RelatedI'm trying to connect a latop (Packard Bell - Easy Note) onto a Netgear N300 wireless router (WNR2000v3).I have already connected a separate laptop which is working fine but the Packard Bell (about 6 years old) wont connect, it will detect my wireless network but then asks for a "Network Key".I'm assuming this the same password that I set up when I configured the router but when I enter it I get the following message:The network password needs to be 40bits or 104bits depending on your network configeration. This can be entered as 5 or 13ascii characters or 10 or 16 hexadecimal characters".
View 3 Replies View RelatedI built my first computer today (woot!) but I'm having issues using my netgear N300 usb adapter to access the internet.
I am using a DLink router but for some reason I am getting some weird issues.
First of all, after using the netgear usb adapter, my mac address is something like E0-xx-xx-xx-xx-xx with the xx being the other numbers. Is having a macaddress starting with E0 wrong? All the other 5 devices on my router have mac addresses starting with 00.
Secondly, I am getting a 169.xxxxxx ip address. This is really starting to bother me because I can't set it up using DHCP.
My desktop was connected to wireless router by ethernet cable but it seems the ports on the router are now US. Bought netgear N300 USB adapter and installed. Had problems getting "limited connectivity etc" messages 'cos wasn't getting IP address allocated. Have now manually allocated IP address and connection status is now "Connected" (with no warning about limited connectivity etc). However I can't connect to the internet.
View 12 Replies View RelatedWhat I need is a net gear n300 wireless usb adapter driver that works for linux, windows 98, windows 982nd edition and windows xp because i'm switching this computer to windows xp and i need a solid internet connection throughout the entire process or a way to switch my computer to windows xp with out the internet conection like a download of the windows xp instalation file.
View 2 Replies View RelatedI have a Netgear Wireless USB Adapter (WNA3100) for my PC. The router is in the other room (approx 5-6 meters away) connected to my flatmates laptop. The adapter worked fine for almost two months, but at the past 2 weeks it keeps disconnecting in every 2-15 minutes, for 1-3 minutes. I have Windows 7 and I'm not familiar with networking issues so the only thing I did was to reinstall the driver and update it, but this didn't work.
View 6 Replies View RelatedInternet connection seems like it drops and comes back up every couple of seconds. Not just little drops, wont load a web page and lag me out of games drop. Usefully only for a few hours at most. But its been a full day this time. Ive been searching all all over the place and nothing is working. So with that I have a Netgear WNA3100 picking up wireless from my land lords up stairs. Not sure their router Id but Im pretty sure the problem is on my end. Ive downloaded and reinstalled updated driver, and I have "excellent" connection all the time, according to windows and netgears software. Ive tried pinging and I only lost one packet once (at yahoo.com) out of probably 100 pings, literally Ive been sitting here for a while, to the ip and some sites.
View 1 Replies View RelatedI am trying to install the adapter for wireless however my PC (Packard Bell Imedia MC H1519) does not read the adapter. Blue light comes on but immediately turns off. Have tried adapter in another PC and light stays on.What can I do to allow my PC to accept the USB cable?
View 1 Replies View RelatedI just bought the Seagate FreeAgent GoFlex Home, 1TB network hard drive for my home network and I cannot put files on the hard drive. The hard drive is connected to my Apple Extreme Airport router, and I can see the hard drive when I go to network on my Windows 7 computer, but when I try to put something in/open it, it gives me "error code 0x80070035 The network path was not found." Im not sure if it is my router
View 1 Replies View RelatedIf the Belkin Surf N300 (Model No F9J1002v1) is CN21/ADSL2 compatible? It doesn't mention it on the box and try as I may I can't get through to tech support UK as I keep getting cut off and the J model router is not recognized on the UK website only the K
View 1 Replies View RelatedI had a Linksys BEFSR41 router with AppleTV 1stGen with 0 problems.Now I have a DIR-655 Vb1 2.00NA firmware and itunes now cannot find the AppleTV as a device. I have tried resetting the AppleTV to factory defaults re-installing latest firmware and reinstalling itunes, powering down all devices etc., and no way can itunes find the appleTV although the appleTV is on the net and seen by the router.I have gone to a wired connection to the router too because the router kept dropping the wireless connection to the router too. Of course I got the DIR-655 for wireless
View 15 Replies View RelatedYesterday, myself and local support team has been engaged to perform troubleshooting the issue of some web site accessing .Mos of this case is cased by MTU issue, So, I've tried to configure the following configuration on interface tunnel 0.Device: Cisco 7609 with IOS s72033-adventerprisek9_wan-mz.122-18.SXF8.bin
I've tried to figure out what the supporting command after 'ip tcp' in tunnel 0 and following likes..ip tcp ?compression-connections Maximum number of compressed connectionsheader-compression Enable TCP header compression.there is no such command about 'ip tcp adjust-mss.So, my questions is that what is the replace command for 'ip tcp adjust-mss' ? Is this only support on Router? such as Cisco 7200. or not, to take effect same functional on C7609, what is the command for that?
I have a netgear router. I just got a iPod from a friend. I am having problems trying to figure out how to get wifi on the iPod.
View 1 Replies View RelatedAnyway, I am looking for a way to discover host names of Apple devices (namely iPods and iPhones) that are on our network. I've tried a number of programs like Nmap, Advanced IP Scanner, and LanSpy to name a few. All of them will report back the MAC address with no problem but no dice on resolving the host name.
My goal is to use the host name to identify the device, and ultimately the person with the device. Any thoughts on how I can go about this? Is there a setting in Nmap I'm missing or perhaps a better program to use?
I have wireless N router and just got wireless G usb adapter... but i dont get it to work.... can i manage to get it working or i need another adapter?
View 2 Replies View RelatedThe first time i had to set dmz i had free tech support from the company. no my free tech support has expired and they want money for tech support now.I would like to know what ip to put in my dmz setting, my ip is supposed to be static, but it changes every few months anyways.I'm aware that having dmz open is a risk, but i have a software firewall.i have my router setup so my 360 and my pc so i need dmz, , if i did not have dmz i would be setting up forward ports for quite some time, as i play multiple pc games.
View 6 Replies View RelatedI have netgear router WNR 1000 v2. I'm not able to connect to Apple ipod. The password is not been accepted.
View 2 Replies View RelatedI recently got an older dell laptop that doesnt have automatic availability to wifi i had purchased a netgear n300 usb internet thing and it still will not connect to my home wifi how do i fix this?
View 1 Replies View RelatedMediacom is my cable provider. They came out a few months ago and thought the problem was their Motorola modem. They replaced it with an RCA (Thomsen) which worked great for about 3 months.Now (3/13) I am losing my connection at least once a day.I started to download the new Netgear Firmware update, but in the middle of that, you guessed it, the connection dropped. So now my router is useless. There's probably a way to reset it, but I haven't found that yet. And so far the Netgear phone # is locked inside the router somewhere! I'm hard-wired to the RCA modem now, so we'll see. I have a feeling, after reading the previous thread, that my connection will be fine.I have my own cable modem, needed for a previous cable provider, and a new Netgear N600 2-frequency router.
View 2 Replies View RelatedI have an old compaq running windows 98. I just bought a netgear n300 wireless usb adapter, knowing there might be compatibility issues.
View 2 Replies View RelatedI am using a EA4500 and use Linksys Smart Wi-Fi to manage the device. In the household we have multiple Apple i devices. Somehow the Linksys Smart Wi-Fi combined two separte i devices (iPhone 5 and a 4th generation iTouch) to one user.The devices actually have different names, but the Smart Wi-Fi is combining them into one device. So I can't use Parental Controls on one of the devices.
View 8 Replies View RelatedI just got digital cable, phone and internet and when I try to use the digital phone and internet at the same time, the internet wouldn't work. Its connected through Netgear N300. The wireless connection will not stay connected.
View 1 Replies View RelatedChild at college having significant connections issues with Sony VAIO VPECB trying to connect to Netgear N300 wireless router. Upped the bandwidth - no impact. Other MACs in the house have no issue.
View 1 Replies View RelatedI just bought a new Netgear N300 router to go along with the Mediacom cable internet I just signed up for. I can plug the ethernet cable straight from the modem into my computer and get internet. Unfortunately this only works after I run the windows diagnostic to correct the errors that wont allow me internet access (unable to connect to IP address, lack of DNS server) but eventually I get access. The instruction then tell me to run the ethernet from the modem to the router and then another cable to my computer from the router. When I do this, I lose all internet access. I thought I just had to instal the router using the provided disk but it never gets past the internet connection test.I have tried to provide the correct IP address, subnet mask, default gateway and dns servers like requested but clearly I am messing something up.
View 5 Replies View RelatedMy linksys never dropped a wireless signal in four years of use, this one has dropped 3 days straight.Dunno about the wireless part of the router; Terry, etaf, any input on the quality of this router?
View 2 Replies View RelatedI have recently purchased a netgear N300 Dual Band router. I am getting some problems with it! I replaced my bog standard belkin 54g router (which never dropped out, never lagged), you just plugged it in, stuck your isp settings in and away you went. Not the same story with this netgear, it promises to give you a better connection in game, but since installing it, all games lag, my laptop is slow browsing, it is getting to the point where we cannot game at all and I am giving up waiting for websites to load! My xbox is connected with ethernet my laptop is wireless, but both lag. Is it to do with the router settings? I am running windows 7 on the laptop, windows xp on another desktop pc, 2 xboxes, one wired one wireless and a wii wireless. All lag!
View 6 Replies View RelatedI set a password and everything on my n300's Netgear Genie, but every time I go to routerlogin or 10.0.0.1, it just shows me the full control panel and never prompts me to log in. Isn't security a bit too lax over there? I even click log out and it says i logged out, then I re-visit and I'm always automatically logged in.
View 3 Replies View RelatedCurrently, I have 2 Apple Airport Extremes, and 1 Wireless Netgear ADSL Router. The 2 AAEs are connected separately to the router, and this allows us to get coverage in most part of the house (it's a large house with concrete and granite walls). I also have a HP Officejet 8500 'wireless printer' that is wired to the router as you can only print to the printer when it's in standby with a physical connection to the router (that's a different story). So my goal is to replace everything as the router is slowly dying and as a result of this, I want to be able to access the Internet wirelessly throughout the house, and be able to print from any where in the house without anything connected via cables. And as a bonus, I would like the Internet to be accessible 100 yards/metres down the garden (workshop is there). Basically, blanket coverage!
View 3 Replies View RelatedMy Netgear DGN2200 (Name NetgearCS) won't check for firmware upgrade because it says no connection to internet so unable to connect to the Netgear Servers - Yet this laptop I am currently using (wireless connection is turned off on laptop but not router) is wire connected to this same Netgear router and I have internet connection because I am able to post this enquiry. Note the Netgear DGN2200 router gets its internet connection from my Sky Router and is connected by wire to this Sky Router. FYI my iPhone is connected wirelessly to this Netgear DGN200 router (NetgearCS) and is able to connect to the internet. Do you know why my Netgear DGN2200 cannot check for firmware updates?
View 1 Replies View RelatedI got 3 windows 7 pc's at home. IP V6 and IP 4 are enabled. I setup my wireless system and it worked 100%. After 3 months I add a LAN cable to two of my PC's. This is when it all started. My internet browsing became very very slow. When i shutdown the one machine it become fast again. I did the following. Pulled the LAN cable and it was still slow. I then put the cable back and disabled the Wi-Fi and it still was very slow. I rested the defaults and restored my old backup and it still slow. Now I can get any access to the internet any more. I the disconnected the netgear router and take a cheap router with only LAN ports and it work 100%. All the above i did with many router and server reboots.
View 1 Replies View Relatedhave an unknown mac address listed in my router's connected devices pane. There is no ip address or device name listed. I know the mac addresses of the machines I have put on the internet, and i don't recognize that one. Router: Netgear N300 WNR2000v
View 2 Replies View Related
