Linksys Cable / Dsl :: Wag300n Internet Is Not Available From Wifi Ap
Nov 15, 2012
I bought used Linksys WAG300N router from my friend. Internet comes from Pirelli DRG-125AG to router. Incoming internet I connect to port 1, outgoing to PC - to port 2. Also I want to share Wi-Fi connection with my linksys router, but I got problem. I enable Wi-Fi, enter SSID, choose password, save changes, my phone connects to router, but says that internet is not available from this Wi-Fi AP. First time I connect Wi-Fi, it works good, but when I reconnect, that sh*t happens. I updated firmware to 1.01.07, restored factory defaults, but nothing changed. AP isolation disabled. Sometimes even after reboot, at first WiFi connection, I get same notification from my android.
View 4 Replies
ADVERTISEMENT
Mar 27, 2011
Have been using the Router for four years, recently its started to lose "memory" re. my user name and password. Switching off overnight, I'm not able to connect to the internet until I login and fill in the two boxes for my ID & PW.
View 5 Replies
View Related
Feb 12, 2011
I have a problem with my ADSL modem router WAG320N for internet sharing . I want to connect internet cable by RJ-45 port to my modem and receive internet on other WiFi enabled devices. It means I want to utilize my router modem as an access point. Is it possible to use this device as an access point ?
View 1 Replies
View Related
Apr 23, 2013
With this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies
View Related
Sep 6, 2011
I have a cable internet.There is no other hardware that connects to the Cable.There is no modem or router.Just the RJ45 cable that I plug in to my laptop and go online.Now,I want to convert this to wifi.what router/modem will I require and possibly with the model number and something thats low in price.I will use only one laptop and no intention of multiple user.I dont intend to use printers either.I am using windows 7.The network adapters that are installed in my laptop are: Intel Centrino wireless N 1030.Microsoft virtual wifi miniport adapter and Microsoft virtual wifi miniport adapter #2,RealtekPCIe FE Family Controller?
View 1 Replies
View Related
Jan 5, 2013
I have a small office where we work over a cable network through our dear old router.Recently, we wired internet, which comes in via a wireless router to avoid another wire. every time one of us want internet to work, we have to disconnect the cable. We're working on windows 7 platform and I haven`tfound how to redirect the internet connection to the wireless.
View 2 Replies
View Related
Apr 27, 2013
I'm trying to share my wifi internet from my pc to my old mac ive connected them via ethernet cable, from my understanding the mac has been assigned an ip address, but I can not use the internet on it.
View 1 Replies
View Related
Jul 26, 2011
I've been having this DNS problem for 6 days or so. The internet doesn't work with cable nor Wi-Fi and I've tried almost everything, ping, configuring the DNS, IP, disabling everything, enabling everything, nslookup doesn't work, releasing and renewing doesn't work too, and to make things worst.(In the main computer, everything works just fine and the router settings appear to be correct too, my computer also works perfectly fine in other places with WLAN).
View 14 Replies
View Related
Feb 9, 2013
my computer just randomly stopped connecting to the intenet. I checked my other computers and phone and found they were all working fine. I was having internet problems pior to this happening (internet was being very slow and some web pages and some videos wouldn't load. I think the latter had to do with flash player though.) I had also been doing some stupid stuff on my comp that I know can give you viruses. Furthermore I also knew that due to previous virus's I was not able to do a restore. So as you have probably gathered my computer was pretty buggered even before this problem. So decided to restore to factory default using some backup images I made when I first got the comp. That went smoothly however the internet stilll doesn't work unless I plus it in using a ethernet cable.
View 9 Replies
View Related
Jun 3, 2012
Currently have two laptops: one is a MacBook using OS X, the other a Gateway PC running Vista Home Edition. A Dell Inspiron 17R notebook running Windows 7 Home Premium is in process of delivery. Current laptops linked on a home Wi-Fi network with AirPort Express router. Anticipated use of new Dell notebook requires its direct connection to Internet outside of current network configuration. Is it possible to have both accesses available in my setup utilizing my one cable high speed service connection? If so, what are the steps needed to accomplish the required setup?
View 1 Replies
View Related
Mar 23, 2012
How can I turn off the wi-fi on WAG160Nv2?Upon entering it I find no option that says Disable Wireless.
View 5 Replies
View Related
Mar 24, 2011
I just bought a macbook and want to connect with my WAG320N. I have no problem to connect on 54mbs what tells me that I'm on Wifi G. The settings in my router was on b/g/n so I changed it to just N but then it won't connect. I don't get error or nothing. I just doesn't connect. I tried all different kind of settings but no luck.
View 8 Replies
View Related
Nov 27, 2012
I've bought X3000 modem recently & the only issue is pops up for me is wifi signal is too low. I've got 2 routers with me. My old linksys router WAG200G has got no issues with wifi signal. I kept both routers at the same place & compared with same standard channel yet what astonishing me that WAG200G has got more stability than X3000 regardless inspite changing to wireless -N. Is there a way to solve it. Btw, I tried all the standard channels yet it doesn't make any difference.
Firmware Version: v1.0.01.
View 7 Replies
View Related
May 23, 2011
Let's say, an antenna like that Should I open the modem and therein there could be a slot for it to be plugged in? Because on the back side of the modem none of the slots will suit such plug.
View 2 Replies
View Related
Mar 11, 2012
I have a existing WiFi ADSL router and I have a WAG120N lying spare in my closet. I recently shifted to my room a floor above. I wanted to amplify signals as the current router is not able to beam signals that far. Hence I wanted to set this up as a WiFi repeater to have a complete coverage. I tried N number of ways but could not succeed.
View 1 Replies
View Related
Apr 20, 2011
I cannot connect my HTC Mozrt via wifi on WAG160N, all other devices work. I am using Firmware Version:V1.00.16.
My router settings in brief: Security Used : WPA 2mixed Radio Band : Standard Wide Chanel: 11 Standard Channel: 7 (2.442 ghz) All Advanced wireless settings page set to Auto ( apart from CTS Protection)
HTC have advised me that the phones channels are between 7-11 , i have tried those channels and i still get router connection unsucessfull, even with no protection on the wifi.
I have a feeling i have to set a IP to the device , but with the HTC Mozart I cannot do this. IOs there a way i can connect a device to the router with Auto IP adress? i have tried everything! from firmware updrades.. resetting it .. different channels..
I have my ipod touch and HTC Hero connected to the wrouter so inkow there isnt anything wrong with the router, even if it is years old!
View 2 Replies
View Related
Feb 4, 2013
I have a WAG354G that i would like to use to extend the range of my WiFi. First Question is - is it possible, and the second is how do i do it?
View 3 Replies
View Related
Apr 6, 2011
I'm going to buy a WAG320N router modem.I've read the manual but I haven't found an answer to the silly question: is it possible to completely disable wifi, and surf in internet using the 4 lan port only?
View 2 Replies
View Related
Mar 13, 2013
I recently bought an x1000 modem/router and found that after 2/3 days of staing active and properly functioning, it does not allow me to login to wifi connection with none of my devices (tried iPhone, iPad and 2 windows pc).Firmware version is v1.0.00 build 018 Sep 04, 2012
View 4 Replies
View Related
Mar 26, 2012
Like the title says, the wifi on my wag120n stopped working. It happened suddenly, nothing was changed in the settings. It stopped showing when i'm searching for wireless connections (SSID is still enabled).
View 3 Replies
View Related
Feb 11, 2011
I'm facing a strange problem here with my WAG54G2 gateway. I've got a very bad connection when the signal strength is 2 out of 5 or less. I tested the DL and UL speed via url...and gives me hardly 1 Mb/s even though I have 10Mb ADSL connection. With wired and wireless connection with 3 out of 5 or more I got 8.7 Mb DL from the mentioned website.
View 1 Replies
View Related
Oct 22, 2012
I try to connect my mac via WiFi I got connection timeout; with my android it keeps trying to connect without success (I didn't change passwords or anything these days).If I choose to connect via guest network everything goes fine.The only way to make it work as expected is to reboot the router.it's a X2000 with latest firmware (2.0.3)?
View 4 Replies
View Related
Feb 9, 2011
I replaced my old separate modem and router yesterday for a Linksys WAG160N. Basically , my next door neighbor is paying their ISP a fortune and hardly uses their internet at all. Ive offered for them to share mine (With both of us providing full consent , i'm not doing anything dodgy!) as i have a very big download quota and it would save them some money.
Now the 2 houses are separated by an alley but distance from the router to their computer is about 6m. Strangely , my WAG160N doesn't reach that far as my wireless network doesn't even appear when they in their house on their laptop!So after reading up on wireless bridges / wireless range extenders and all sorts of things i'm now very confused.
Im basically looking for the most cost effective way of extending the signal from my WAG160N , possibly through the use of a second router in my garage) to allow the neighbor to get a good signal. I cannot reposition my modem/router from its current location and also cannot connect a second router using an Ethernet cable , it must be done wireless. So , is there a way i can wireless connect my WAG160N to another wireless router in order to extend my signal for my neighbor to use? I was looking at the Netgear WN2000RPT and the WRT160N as someone else had previous success with using this as a repeater.
View 4 Replies
View Related
Mar 5, 2012
after few years without problem with wifi connection at my home, four month ago began wifi lost connection.
4 iphone with assigned ip address;
3 Portable PC (2 with dhcp and N band, 1 with assigned ip with G band)
Router is not too far from wifi equipment
the wifi is protected with WPA-PSK
Often during day, on pc and iphone we have lost connection, we can see in settting the SSID of my wifi lan, but if we try to connect recive message:Unable to connect to casa(casa is my ssid), on router the wifi led is green fix (not blinking) and only after a few minutes or many try wifi return aviable (for all equipments at the same time and the wifi led blinking)If I want quick connection, without attempt, i simply power off router and after power on, the wifi connection begin aviable!
1. changed SSID, very different from other SSID of my neighbors;
2. changed class of ip address (from 192.168.x.x. to 10.16.x.x);
3. wifi with no protection;
4. tried with & without mac address filter;
5. tried with only 1 wifi connection.
View 3 Replies
View Related
Feb 10, 2011
I need to connect 4 pc together and to the gateway (only one pc has wifi). i would know if it's possible to use one device like a router where i can wired the 4pc to put them in lan and use also this router to connect all the client to one gateway WAG320N.
View 3 Replies
View Related
Mar 28, 2012
For a few weeks now, my router has been dropping WiFi connections, seemingly at random. When trying to watch BBC iPlayer is terrible, as it keeps dropping every 5 minutes.
Tonight my iPod Touch (iOS5) was connecting okay, while my son's iPod Touches (iOS3 and iOS4) would not. My MacBook Pro would not connect either.
The only to get things working again, is to turn the router off for a few minutes and turn it on again.
I have router wireless settings as follows:
Network Mode: mixed
Radio Band: Wide - 40MHz channel
Wide Channel: 9
Standard Channel: 7 - 2.442GHz
SSID: Disabled
Router Firmware Version:V2.00.20
My wired connection is running well:
Speed DownSpeed Up
15734.10 Kbps ( 15.4 Mbps )1012.05 Kbps ( 1 Mbps )
View 7 Replies
View Related
Dec 20, 2011
There is a Linksys WAG54G2 firmware v1.00.19. If you try to configure access to wi-fi on the list of MAC-address get the error "The MAC address can not be broadcast address" for the MAC address - 5c: XX: XX: XX: XX: XX, for mobile phone Sony Ericson Neo. Safety on the modem is turned off. Laptop computer and connect to Wi-Fi without any problems. Prompt a possible solution. Which parameters can be set?
View 3 Replies
View Related
Jul 10, 2011
Just got a WAG120N modem/router , everything is set up and works fine.But I am very disappointed with its wifi range.After using an iPhone and a PSP , I found that, its range is 1,80 meters only, in empty room.Is it faulty ? I cant believe its range is too short although I know that its not "enhanced speed & range" as typed on box.I tried all combination of channels/protocols with no success and it's already flashed on latest version. I really cant connect to my wifi devices.
View 2 Replies
View Related
Jan 31, 2013
The X3000 functions as a router/gateway between the ADSL network, its wireless network (WPA2) and its wired network. After a cold start, factory reset and restore of the config file everything works fine. I have interconnection between all three parts of my network. However after ± 24 hour there is no connection possible anymore from the wired to the wireless network and vice versa. A normal power off - power on will not work. The only thing that works is running the factory reset procedure as discribed above. I changed the MTU to manual 1400 as was suggested on this forum, but that does not work. Apart from this issue, ADSL is hicks sometimes. From my ISP I heard that at certain times my router issues ten's of DHCP requests within one minute, while the connection (modem) remains perfect. I have the impression that after such a DHCP request storm to my ISP, the interconnection between my X3000 wireless network and my X3000 wired network is lost.
View 4 Replies
View Related
Mar 25, 2012
My ISP recently upgraded my line to ADSL2+. I am still only getting 1.36Mbps download speed across WiFi but if I connect my laptop to the router with ethernet cable I get 8.59Mbps. Why is the router slowing down my connection so much?
View 1 Replies
View Related
May 14, 2011
Connect WAG160Nv2 with another modem / router Wi-Fi?
View 2 Replies
View Related
Feb 11, 2012
I have problems with my wifi router linksys wag200g.we have 2 pc in my home, and every time the other one connects to internet i lose almost 80-90% of speed connection.can i do something to limiting the speed of the other computer?
View 1 Replies
View Related
Jul 31, 2011
I have a WAG120N, its nearly dead,I tried resetting it many times, it still wouldn't work. The WiFi LED blinks continuously and uniformly. There is no WiFi, no access to router, the only thing that is working is the switch.
View 4 Replies
View Related