I have a small office where we work over a cable network through our dear old router.Recently, we wired internet, which comes in via a wireless router to avoid another wire. every time one of us want internet to work, we have to disconnect the cable. We're working on windows 7 platform and I haven`tfound how to redirect the internet connection to the wireless.
View 2 Replies
my computer just randomly stopped connecting to the intenet. I checked my other computers and phone and found they were all working fine. I was having internet problems pior to this happening (internet was being very slow and some web pages and some videos wouldn't load. I think the latter had to do with flash player though.) I had also been doing some stupid stuff on my comp that I know can give you viruses. Furthermore I also knew that due to previous virus's I was not able to do a restore. So as you have probably gathered my computer was pretty buggered even before this problem. So decided to restore to factory default using some backup images I made when I first got the comp. That went smoothly however the internet stilll doesn't work unless I plus it in using a ethernet cable.
View 9 Replies View RelatedI have a cable internet.There is no other hardware that connects to the Cable.There is no modem or router.Just the RJ45 cable that I plug in to my laptop and go online.Now,I want to convert this to wifi.what router/modem will I require and possibly with the model number and something thats low in price.I will use only one laptop and no intention of multiple user.I dont intend to use printers either.I am using windows 7.The network adapters that are installed in my laptop are: Intel Centrino wireless N 1030.Microsoft virtual wifi miniport adapter and Microsoft virtual wifi miniport adapter #2,RealtekPCIe FE Family Controller?
View 1 Replies View RelatedI cannot connect my HTC Mozrt via wifi on WAG160N, all other devices work. I am using Firmware Version:V1.00.16.
My router settings in brief: Security Used : WPA 2mixed Radio Band : Standard Wide Chanel: 11 Standard Channel: 7 (2.442 ghz) All Advanced wireless settings page set to Auto ( apart from CTS Protection)
HTC have advised me that the phones channels are between 7-11 , i have tried those channels and i still get router connection unsucessfull, even with no protection on the wifi.
I have a feeling i have to set a IP to the device , but with the HTC Mozart I cannot do this. IOs there a way i can connect a device to the router with Auto IP adress? i have tried everything! from firmware updrades.. resetting it .. different channels..
I have my ipod touch and HTC Hero connected to the wrouter so inkow there isnt anything wrong with the router, even if it is years old!
I'm trying to share my wifi internet from my pc to my old mac ive connected them via ethernet cable, from my understanding the mac has been assigned an ip address, but I can not use the internet on it.
View 1 Replies View RelatedI've been having this DNS problem for 6 days or so. The internet doesn't work with cable nor Wi-Fi and I've tried almost everything, ping, configuring the DNS, IP, disabling everything, enabling everything, nslookup doesn't work, releasing and renewing doesn't work too, and to make things worst.(In the main computer, everything works just fine and the router settings appear to be correct too, my computer also works perfectly fine in other places with WLAN).
View 14 Replies View RelatedI bought used Linksys WAG300N router from my friend. Internet comes from Pirelli DRG-125AG to router. Incoming internet I connect to port 1, outgoing to PC - to port 2. Also I want to share Wi-Fi connection with my linksys router, but I got problem. I enable Wi-Fi, enter SSID, choose password, save changes, my phone connects to router, but says that internet is not available from this Wi-Fi AP. First time I connect Wi-Fi, it works good, but when I reconnect, that sh*t happens. I updated firmware to 1.01.07, restored factory defaults, but nothing changed. AP isolation disabled. Sometimes even after reboot, at first WiFi connection, I get same notification from my android.
View 4 Replies View RelatedI have a huawei 521i router that I recently reset back to factory settings. I have been trying to set up my wifi but something is wrong. I can connect with my ethernet cable but not wifi. I have set up my wireless connection and I can see it in the list.
View 1 Replies View RelatedConnect WAG160Nv2 with another modem / router Wi-Fi?
View 2 Replies View RelatedI have Linksys WAG120N ans ADSL+ Network from Netia (Poland) Internet is working from cable (Ethernet) but in WiFi I have big issue. url...My device who works fine:
-iPhone 4
-iPhone 3G
My device who don't connect to the WiFi network:xbox360 (new edition black with build in WiFin adapter)Asus Eee PC 1000H (Windows 7) witch WiFi.Xbox360 an Eee PC works only when i disable the Wireless Security ;/ i tried plenty option Wireless Configuration manual or Wi-Fi Protected Setup. I tried all Security Mode i works only when i disable.
I have a ADSL modem with a wi-fi router connected to the internet. I want to connect my Belkin F5D8233-4v3 to the router wirelessly and use it as an Access Point to extend the range of my home wi-fi setup. How do I configure the Belkin to connect to the adsl router over wi-fi without running the cable?
View 1 Replies View RelatedI have a problem with my ADSL modem router WAG320N for internet sharing . I want to connect internet cable by RJ-45 port to my modem and receive internet on other WiFi enabled devices. It means I want to utilize my router modem as an access point. Is it possible to use this device as an access point ?
View 1 Replies View RelatedI have an Acer aspire one netbook, model D255 which operates on Windows 7.Having trouble connecting to wifi connections. It worked fine initially, I tried turning the wifi switch on and off, it tells me that there are no wifi connections available, however everyone else Is able to connect via Wifi on their computers and myself without a problem on other devices.On troubleshooting it's says - that an Ethernet cable is broken or not plugged in properly, and is unable to fix the problem, as obviously I am not connected via any cable.I looked in network and it says that the Ethernet cable is unplugged and does not show any available networks.
View 10 Replies View RelatedCurrently have two laptops: one is a MacBook using OS X, the other a Gateway PC running Vista Home Edition. A Dell Inspiron 17R notebook running Windows 7 Home Premium is in process of delivery. Current laptops linked on a home Wi-Fi network with AirPort Express router. Anticipated use of new Dell notebook requires its direct connection to Internet outside of current network configuration. Is it possible to have both accesses available in my setup utilizing my one cable high speed service connection? If so, what are the steps needed to accomplish the required setup?
View 1 Replies View RelatedI have an arris broadband modem combo and the wifi signal in the basement is poor I tryed to connect a netgear n 300 wireless router (wnr2000v3) to extend the wifi with an ethernet cable but the neatgear router does not have an internet connection.
View 5 Replies View RelatedI want to connect to the Internet small office where docsis (internet over tv cable) is used as WAN.For similar tasks but other WANs (adsl, dial-up) I used 800 series. But now I can't find anything in this series to solve my issue. There is 815 but it has no wi-fi.
I can use cable modem that my ISP gave to me: this modem acts as bridge so I can use router with FE-based WAN but it is better to have one device instead of two.
After i reinstall my PC, i can't connect my vaio (VGN-TX750P) to internet through internet cable nothing appears in Control PanelNetwork and InternetNetwork Connections wifi is working fine but I can't connect using ethernet
View 7 Replies View RelatedIn my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
The error message is that the cable isnt plugged in... but it is and i know its not foulty. when i change the networking speed to 100mbs full/half duplex it sort of flickers a bit like its trying to get contact with the router but it never establishes it
View 4 Replies View RelatedWith this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies View RelatedFor some reason, i cannot connect to the internet using my current ethernet cable. I am 100% positive that adapter is working fine, as i had maintenance come into my room and check it out, but my computer won't connect to their internet through my cable. [code]
View 4 Replies View Relatedi went over to my grandma house and got wireless mouse and the mouse uses a floppy disk to put some sort of wizard wireless network thing on my computer but now i cxan use said floppy disk be cause it broke but ever sence i used that i cant conect to the internet
View 1 Replies View RelatedMy aunt called me about her laptop not being able to connect to her wireless anymore. It was working fine until last week and since then, she can't get on. She has a netbook that can connect to the wireless and a desktop that's plugged in from the wireless router. When she tries to connect to the wireless, it says it's connected but shows no internet access in the Network Sharing Center.
I tried plugging it in directly from the router and I get the same message. I've made sure to enable the wireless and have even uninstalled and reinstalled the latest driver for the card. It's an Acer laptop with the network adapters Atheros AR5B95 Wireless adapter and Atheros AR8152/8158 PCI-E Fast Ethernet Controller.
I have even brought her laptop to my house and tried to connect via wireless and a direct cable, but I get the same issue.
My hp mini will not connect to the internet, even with a cable directly from the modem. We downloaded a bunch of games from the internet, and then in removing the junk, may have deleted vital components. My device manager has "other devices" and under that has "ethernet controller" and "network controller," neither of which has a driver. Windows was unable to find a driver when I tried to reinstall the driver (although I'm not sure whether there should be one - the icon next to everything in this category is a yellow question mark). I thought the problem was just a wireless issue until this morning, when I hooked it up with a cable to try to find a wireless driver. It does not connect with the cable either, and now I am really lost.
View 1 Replies View RelatedMy mother has an older Compaq laptop running XP home edition. She hasn't used this laptop for a while and it won't connect to the internet through her cable modem.I know it isn't a modem or ISP problem since my laptop will connect just fine. By the way, we are connecting to the cable modem with a cat 5.
View 5 Replies View RelatedJust got a new modem and it works fine while connected through an ethernet cord but I can't connect wirelessly. My network doesn't even show up in the list of available networks. I'm using Vista by the way. I've downloaded all drivers that seemed to have something to do with my problem. [code]
View 1 Replies View RelatedI recently got Fios installed in my home. I believe there is a box the size of a power box in the back room for the Internet.All my other devices (MAC, iPod, Blueray Player) are able to recieve instant and unbelieveable internet connection except for my Dell. I have a Studio XPS Dell computer with windows 7. I plugged in the ethernet cable in the back of my computer and into the "Fios Box" but i didn't recieve any internet. Then i bought a wireless adapter and I do get internet but it disconnects me like every 5 minutes.
View 3 Replies View RelatedSo saturday, my friend and i build my computer. Everything worked just fine that day. Sunday i had no problem connecting to the internet. Sunday is also the day i set up a password for my admin account.
Now when i came back from work monday, i tried to log in to my computer. As it appears, i forgot my password... (same i use on everything, so i must have messed up inputting my pass)
So i did a windows reset, since i had no CD or USB to reset my pass. I tried installing windows, and it appears 'this copy of windows is not genuine'. I thought, okay, no prob, as long as i have all options.
it looks like this thread hasn't been active for a while Also I did that ipconfig /all command as well and here is what i got
View 1 Replies View RelatedI am in a College dorm and the only access to internet we have is by connecting an Ethernet cable to the connection in the wall and straight to the computer. That is how I have internet as we speak and it works fine. Problem is, that when I plug it in into the xbox it doesnt even connect to the network?
View 1 Replies View RelatedI updrade my wireless router from 54 mpb to 150. Now my pc/router isn't connecting to the modem. How do I correct
View 1 Replies View RelatedI have an hp G60 series laptop but i have trouble connecting to internet using Ethernet cable
View 5 Replies View RelatedWAG160N
S/N: SSH00H406302
MAC: 001D7EB42921
Manufactured 04/2008
I can no longer access the internet, and the internet has been difficult to bring up for one to two weeks.Internet light does not come on. Under Status tab, interface is down, tried refresh and connect but nothing.The IP address can be pinged, 4 packets sent and 4 packets received. Tried resetting defaults and refreshing but no success.Bought this router in September 2008 to replace WAG54G which was constantly turning on and off every few seconds.
