For months now, my ping has been randomly spiking at an inconsistent rate. I can be good for an hour, and down for a week. My usual ping is a solid 15, but it has gone as high as 1000. I've gotten a new modem, and that has changed the problem a little bit(I no longer suffer extreme download and upload loss when my ping drops) but I have yet to find a fix for the problem.
View 1 Replies
I'm really lost with this issue. its been going on for months. here is a copy paste of my ping to yahoo. "ping yahoo.com -t"
View 1 Replies View RelatedI'm renting accommodation, so I don't have direct access to the router etc.It's a Belkin (who I understand to be a pile of ****) router.The ping is mostly 6-8ms, but ~10% of the time it spikes to >100ms.This is way too high for a router right? Surely it should be like, 1ms.Wireless connection.It broadcasts two SSIDs (one is the other but with 5ghz appended).
[code]...
having high ping how to low the rate of ping.
View 1 Replies View RelatedWhen playing multiplayer games online, I will, after some time (15-20 minutes) get horrible lag/disconnects and ping issues, It usually starts sorts itself out when i restart the game in question or just rejoin.This is getting really frustrating, I've contacted my ISP but they just claim that the problem is on my end.
View 1 Replies View RelatedWe have a Cisco 1811 which is running a number of different services. Let me try and explain how everything is working first.
On routed port 0, we have a statically configured fiber connection which routes a public /28. No BGP, etc just default routes. The /28 is divided into a two /29's, once of which is routed to Vlan3.
On routed port 1, we have a PPPoE DSL connection, with a single static IP.
Vlan1 is a 192.168.1.x subnet
Vlan2 is a 192.168.2.x subnet
Vlan3 is a y.y.y.x/29 subnet(the routed subnet)
Vlan1 and Vlan2 PAT the static fiber IP(not the other /29) along with the DSL. The other /29 is used for a few static NAT translations and SSLVPN
There is a zone based firewall in play, as well as a few route-maps to redirect traffic out certain interfaces on the inside.
The problem is, the fiber IP randomly stops responding to ping/ssh, however I can ping the interface IP assigned to Vlan3 from the WAN. DSL never loses connection in this manner.
I can normally reestablish "normal" connectivity by connecting to the DSL and bringing down the fiber and routed vlan in a specific order.
Problem downloading is really slow even for the smallest files it takes forever. For example was downloading a game it said 1 hour 30 minutes after 30 mins it was down to 1 hour but then it started to spike up at one point it was 600 hours, kept doing that until it was downloaded which took about 2 Hours +. Ran the game and the game gives me a ping really low which is good my ping was 17, with the lag spike it reached 330 to the point I would freeze. Then it drops down kept doing that until the game was finished.
View 1 Replies View RelatedI purchased the D-link DWA-131 wireless adapter about 3 months ago. ever since I got it when using it, the connection will spike to 1000 ping (on any server/web address) about once every 2-3 minutes, I think it might be overheating, but i'm not sure What i've tried already: updating the drivers using both windows zero configuration and the utility that came with the d-link product my old adapter still works correctly (on the same pc, using Zero configuration, same USB port)
[Code]...
I have had a WAG160N Wireless router for around 6 months and in the last week the connection has been extremely spikey. While running in cmd "ping www.google.com" the spikes are quite apparent. A lot of the time it is 45-60ms but then it spikes to 1000 or more. I have tried on 3 different laptops in the house and the same issue with each of them. I tried using a wired connection and the problem is eliminated so im assuming it has something to do with the wireless.
View 1 Replies View RelatedI bought a new Toshiba Satellite C660 laptop with Windows 7 on Sept 1st, and had no problems at first with the mobile broadband. However, on Monday 13th I noticed massive spikes in the data usage. After browsing the internet for around an hour I decided to check my usage randomly, and it was at 350mb!Since then, there's times when I don't even have my browser open and in the space of 5 minutes it will reach 150mb of usage. There's also times when it works absolutely perfectly for hours on end (including today, where it was working fine up until around an hour ago!) I phoned the mobile broadband company twice last week, the first time the person told me that it was a computer issue and to go to an IT repair place.
So after sending him screencaps of Windows task manager processes/applications/network he can't see anything that could be doing it. He advised me to do a full antivirus scan, and full malwarebytes and ad aware scans and they've all come up clean.The second time I phoned the broadband company, they told me that there were some wrong settings, and that they've been changed now but if I have any more problems to ring customer care again.So after seeing an offer with a different mobile broadband provider, I decided to buy a new broadband stick and change networks in hoping that would solve the problem.... it didn't.
So there's definitely something about the new laptop that's causing the data usage to spike I don't use any torrent programs, and haven't been watching youtube videos constantly or trying to stream online, like I said there's been times where I don't even have Google Chrome open and it's using up all my data! I don't use Skype or anything like that either (to be honest I have barely any programs on this new laptop)I've turned off all the automatic updates for as many programs as I think can have them. Ii's definitely improved a bit though, but there are still times (like around an hour ago) that the data usage starts spiking randomly.
I have a Dell XPS 17 and I am having trouble with the wi-fi. It always connects and works, but is very inconsistent. It will speed up and slow down for no apparent reason. I ran a speed test and it will go from 40mbps to 2mbps. This does not happen on any other device connected to the wireless in the house. It does not happen when the laptop is connected directly. I also purchased a USB wireless adapter and do not have any problems when connecting wirelessly that way.A new modem and router have not changed the problem.I am 100% sure it is the wireless receiver in the laptop itself.
View 3 Replies View RelatedI have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
I have a fairly large area to cover with wireless, and set up a second router to act as a repeater. The signal works great, other than being extremely inconsistent. Sometimes I get a speedtest of 18 ping and 7 mbps DL to a nearby server, and 10 seconds later it's 300 ping and 2 mbps. There are no problems when using the primary access point without the repeater. Where should I start in troubleshooting? I can't see why there would be such terrible consistency since much of the time the signal strength is fine. It's purely a problem of dropping the connection often.
View 1 Replies View RelatedI have full wi-fi signal and I have a fast broadband connection. Every now and again the connection speed to just one PC drops to a point where there is almost no activity. I get various "connection timed out" and "DNS lookup failed" errors, then after about 10 minutes of frustration everything works again. I know this problem is isolated to just this one PC as I have done Internet speed tests from another computer. I have tried using different wireless cards, resetting the router, changing DNS servers. Nothing has worked.
View 2 Replies View Relatedi have high speed internet from charter(i know they are not the best but more on that later) with actually download speeds tested online around 10-13mbps on average. i keep my computer pretty clean, running smart defrag, cleaning the disk, anti virus, only have programs running in the background that are needed, have increased my virtual memory and also use readyboost with a 4 gb flashdrive that i allow to use all the flashdrive memory as "ram" memory. so i think this has be something below the surface and that i cannot handle on my own. i do not think it is my internet provider because i have to roommates that have computer and they have no problem usually with the internet. when i say usually i mean they have problems sometimes maybe 3-4 times weekly where i have problems at least 2-3 times a day.
View 1 Replies View RelatedI had a power surge caused by the local electrical provider on February 3, 2011. Since then my computer power source was replaced and the computer works okay. Since the power surge my speed to uploading and downloading on the internet is inconsistent. Time Warner, my internet provider, said it was an internet problem and they replaced the modem, and have worked on their lines multiple times and now say it's a computer problem, not with their wiring. Yesterday I could not get an upload or download signal at all. This morning my download was 29.23 and upload 1.91. Some days it will take 4-5 yours to send an e-mail. I don't know what to do.
View 1 Replies View RelatedMy laptop is connected to an Internet cable inside my apartment building for access to a free Internet service provided by the building management.The high speed cable service works okay for a few days but then after say 4 or 5 days it starts to slow down and then on the 6th or 7 day I can no longer connect using the cable. The technician in my building doesnt speak such good English and claims it is a software problem in Windows itself in my laptop ,but I don't know what would cause the software to trigger this condition?The last time the technician told me to go through some steps but I have to admit I have forgotten the very last ones in the " procedure " and how to complete the final steps of the procedure :-
He said to :-
1. Right click on the computer icon on the desktop
2. click on device manager
2. click on " network adapters " these are shown as being " Atheros AR8152/8158 PCI-E Fast Ethernet Controller ( NDIS 6.20 ) and secondly " Realtek RTL8188CE Wireless LAN 802.11 PCI-E NIC "
4. After that he told me to " refresh " the connection but I have forgotten how to do so?The wireless connection is working okay but I have noticed once this fault happens to the cable connection, the wireless connection doesn't work either until I unplug the cable. Then I can connect to the wireless Internet connection. But if I leave the cable in then neither the cable or the wireless works?
My internet, after a few seconds of working right, craps out on me and I cannot figure out why. I am tempted to purchase a new adapter.My ISP is Comcast, I'm using T1, and I run AVG.
Quote:
Windows IP Configuration
Host Name . . . . . . . . . . . . : JamesBoothe-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
we just switched to a DIR-655 from a terrible Rosewill router a few weeks ago. We've been having some problems, and I've been trying desperatly to figure out what exactly is causing them so I can fix it.
Problem:
The router will periodically, and seemingly at random, dive into huge latency spikes. As of writing this, I am running a one thousand ping latency run from CMD, and I've watched response times go from 15ms average to 300ms average. The time of day seems irrelevant, as is what anyone on the network is doing. After a fresh restart of the router, everything runs smoothly for about 10 minutes, at which point everything goes ham.
Details:
I am using a DIR-655 D-Link router with a Cisco DPC3008 modem provided by Comcast.
Router P/N: BIR655ANA....B1
Router S/N: F35F5BC0019A777
Router Firmware: 2.10NA
Connection Type: DHCP
I've run the Modem directly into my PC, the connection is perfect. I've hard resetted multiple times, as well as run it with all of the above settings on/off. Updating the firmware does nothing. I've moved the router/modem apart so as not to cause signal interference.
Things I Can Try
I want to try running the router with wireless disabled to see if some sort of interference is being caused by the other computers on the network, or if one of them is hogging bandwidth.
I want to try running a program that can monitor or analyze each stage of the connection to see where the problem is.
I want to downgrade to an earlier firmware.
My company just bough me another Dell Latitude 6530 with Dell wireless 1540 half card previously I am using Dell Latitude 6520 with Intel Centrino Ultimate N 6300 without any problem
but this new Dell 6530 wifi connection is pretty slow and inconsistent -- I may got burst of high speed / performance for few seconds but pretty much all time is slow.I ran both the old 6520 and new 6530 side by side as I am transferring file and downloading new software, so I can tell for sure that this new 6530 has some issues.
1. Update the drivers for Dell wireless 1540 using this link [URL]
2. Set the power management to high performance, disable power management for the wireless card as well
3. Turn off "Allow computer to save power" in the wireless card adapter settings
Webpages sometimes load quite sluggish and when playing an online game I am experiencing much more lag. However, if I try loading the same webpages a few minutes later, they will being loading fast again. It seems as if my internet is periodically slowing down. Using speedtest.net, it shows 10Mbps download and 9Mbps upload. However, sometimes when I run speedtest again, the download portion will hang and the test won't complete.My internet provider is COX Communications. I do not think I am using a router as it is university provided internet so I connect my Ethernet directly into the wall jack.
View 3 Replies View RelatedI have a linksys wrt54g wireless router and a few weeks ago my wireless connection started to become inconsistent, it would randomly drop service or be very slow, and now it has become very inconsistent and slow, all the while the wireless signal would be 4-5 bars.On my windows 7 desktop, often times the yellow triangle with the exclamation mark pops up over the signal strength indicator when its at 4-5 bars.I've tried changing to 2 different routers and its the same, and the problem is persistent for all computers in the house.I've connected directly via ethernet to the modem and router and service was fine.There are a few wireless networks in the area,some with quite strong signals, but I downloaded the xirrus wifi inspector and it says I'm not sharing a channel (channel 1) and though I'm ~15ft from the router, the signal is ~65dbm, which seems low and is almost equivalent to neighbor's wireless strength.
View 2 Replies View RelatedI have created 7 QuickVPN users on router and on QuickVPN client. They all work except two. Have deleted and reinstalled on router and in QuickVPN to no avail. Changing the user name by one letter works (eg user NameVPN doesn't work, but NameVP does). Somehow router (I think) is not releasing user credentials/policies (which seems to agree with log). I have rebooted router.
View 1 Replies View RelatedI have a problem with my isa570. Ever since I started using it it sometimes takes me two or three clicks to get a website to load. Also connecting to iTunes is almost impossible. It does work sometimes but then very slowly. I have switched off application control.
View 1 Replies View RelatedI've multiple FWSMs running. The funny thing: When I do a "show resource usage" I have one blade showing a "Conns [rate]" and "Syslogs [rate]" values and one blade isn't.
SSH 4 5 15 0 admin
Syslogs [rate] 1 437 unlimited 0 admin
Conns 149 23465 unlimited 0 admin
Xlates 154 2877 unlimited 0 admin
Hosts 154 2877 unlimited 0 admin
Mac-addresses 6 7 65535 0 admin
All modules are running the same software version 3.2(10).And the even more funny thing is: on one blade I have different output for all the contexts on it.What's the reason for that behaviour? A bug?
I have two core switches - 4506E, and i noticed there are frequent cpu spikes on both of the cores switches. As its spikes intermitendly i couldnt able to anlyze the issue. I need inputs on the following,
1) Is there any Free CPU process monitoring tools to identify which process is spiking ?
2) Troubleshooting techniques to identify the issue.
I have two switches claiming to be the root bridge for the same vlans. The 3750-X stack was configured to be the root for vlans present and the 2960S was brought online over the weekend to replace another one. This is the command I used to attempt and make the 3750-X stack the root
spanning-tree vlan 1-2,10,50,101,200,900,999 root primary diameter 4
The IOS converted that to this
spanning-tree mode rapid-pvst
spanning-tree loopguard default
spanning-tree portfast bpduguard default
[code]......
Wireless card is Dell Wirele4ss 1490 Dual Band WLAN Mini-Card
Each time I try to launch the Dell WLAN Utility I get a message:
"Internal configuration is inconsistent. Please restart the machine to resolve the problem."
Restarting does not solve the problem.
The wireless card connects fine with Windows managing the connection. But what about the Dell Utility? What can be done so it will launch and I can let it manage the wireless connections?
I have reinstalled the Driver and utility using R115319.EXE
I have a new 3560G to set up a small network for a remote site. I configured the vlan and an SVI as the gateway. The switch is also the DHCP server for the LAN. I configured Gi0/2 as L3 port, connecting to the nearest neighbor. My network runs EIGRP so i advertised the routes into the EIGRP process. The switch forms EIGRP neighbors and learns all routes in the enterprise network. The problems I'm having now are: 1. The switch learns all routes in my enterprise LAN and can ping devices in the enterprise LAN, but I can’t ping any interface on the switch from the enterprise LAN. 2.
View 5 Replies View RelatedI set this up and I can ping all the gateways but never the hosts. I was hoping I could make these links between 6500's a mix of L2 and L3. Check it out. They are connected in a linear fashion R1--->R2--->R3. I can ping from R1 to R3's SVI4 gateway but I can never ping a host on that SVI4. I was hoping that I could use the port-channels between 6500's as routed links or as trunk links depending on the type of traffic....thought it would ease the migration. I suppose I could always get rid of the port-channels and just make separate L2 and L3 links between the 6500's.
View 3 Replies View RelatedFrom My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
View 25 Replies View RelatedWhen I ping an address from my windows machine, it succeeds, but when I ping to the same IP on my MAC OS X machine, it fails.
1. Why?
2. How to get successful ping on my MAC machine?
I installed window server 2003 in a old Pentium III server as a standalone test server. Now I want to use it as a print server and connected it to the domain. I can ping workstations and other servers from that test svr. But i cannot ping that test server from the work stations.
View 2 Replies View Related
