I just bought a Lenovo ThinkPad for my wife and I cannot connect to my router via wifi. I keep getting the message 'Windows was unable to connect to (network name). I tried it with router security disabled and I still get this message.
View 3 Replies
I am not able to connect my HP laptop (Windows Vista) to the internet via a wireless router/high speed internet.My internet service provider confirmed that it is a problem with my HP laptop.I have a Linksys router. My other laptop (Sony) connects fine.I have tried two browsers on my HP laptop to access the internet with no luck.My HP laptop does say that I am connected to the wireless network.
View 9 Replies View RelatedI have Lynksys router WRT54G. I have 3 laptops in house connecting to internet with no problem. A new person has moved in with a laptop that has windows 2000. The new person is not able to get an internet connection.
View 9 Replies View RelatedI have twho Windows 7 laptops that I want to connect to a Time Capsule, I have no problem at all with one of them, but the other laptop is giving me the error in my question
View 1 Replies View RelatedMy laptop is reading a full WiFi signal from my router. I am currently connected to the router via Ethernet on the same laptop. I've been reading tons of old threads to troubleshoot this. I'm at a loss. I have used this current networking hardware for more than a year without any problems. I do have a pretty old router but my iPod connects to the WiFi no problem at the moment. Here's what I've tried so far:
- soft reset of router
- power cycle modem and router
- removed saved network information from the laptop
[Code]......
I've got a Dell laptop with Windows 7 and I'm unable to connect to public wifi. I have a home wireless connection that I'm able to connect to, and I'm able to connect at friends houses. But when I try to connect at a local coffee shop, it doesn't work.
View 4 Replies View RelatedSo i recently just obtained a Vaio Sony Windows 7 laptop. I turned it on and everything was working fine. I used the internet for about a minute then my internet disconnected and was unusable. I opened my desktop computer to see whats wrong but the connection there also stopped. I troubleshooted and it says i cannot communicate with Primary DNS server. It says i am connected but i have no internet access. I am currenty using my iPhone to type this.
View 14 Replies View RelatedI have been trying to connect to the internet with my new adsl2+ wireless internet with dodo, i rang them and they say its my toshiba laptop windows vista that is the problem, it says that i can connect to the internet and from their end it confirms it however when i open a web browser it always comes up with page unavailable, i can connect no issues to the net via the modem connection cable but i need to connect wirelessly asap?
View 7 Replies View RelatedI'm having an HP laptop with windows 7 installed on it, but cannot view available wireless network. under network and settings i can see the wireless network card, which means the wireless drivers has been installed. but can't view my wireless network but other computers are viewing my wireless network.
View 1 Replies View RelatedLast night i was changing some settings of my router(linksys WRT54G) trying to assign a gaming console a static ip. I thought i had succeeded and everything was working fine. 12 hours later, it appears everything can no longer connect. all the regular lights of the router are on, but my desktop pc and my wireless laptop seem unable to connect.
View 6 Replies View RelatedSo, my computer was having some serious issues, but the internet worked just fine. Me and a friend live in the same building and we're sharing a wireless connection and splitting the cost. I had to reformat my computer (it was windows XP SP3), but when I reinstalled windows it's SP2. I installed the wireless drivers and such, and those work great. However, I try to connect to the network 'Cay13' which is the one I'm sharing with my friend but it won't connect. It will just keep saying 'waiting for the network 'cay13' to connect to the network'. It won't come up with an error, it will just stop and refresh the wireless networks. I will then get a bubble that says 'Unable to connect to preferred wireless networks., Windows will keep trying.' etc... My friend's computer connects just fine so it doesn't seem like it's the router, and I've tried every which way from sunday to configure, connect, uninstall/reinstall the wireless drivers, etc.
View 4 Replies View RelatedI have toshiba L675 lap tp trying to connect to wi fi .I have connection but the web page can not connect
View 1 Replies View RelatedI stumbled upon a problem which i cannot resolve, the situation is as folows:
A router (Netgear wgt624v3) is connected to the internet. My smartphone and every other wireless device I tested is able to connect to it but not my laptop. My laptop is able to connect to any other wireless network. I can however get acces to the web using an ethernet cable plugged into the router.
I already installed the newest driver for my wireless network card (Atheros AR5B93 Wireless Network Adapter) and I already upgraded the router to the newest firmware. I also disabled every security including the built in firewall. The strangest thing is that I can actually find the SSID of the network, I just cannot connect to it.
FYI: I use windows 7 64bit, laptop type is Packard Bell LM86
I can not get my new hp pavilion g series laptop to connect to the wireless router that I currently have. What do I need to do?
View 1 Replies View RelatedI have windows 7 on one client and windows xp on seconad client. the problem occure when i share hp 1320 pcl 5 printer on network..when i go to install the error shows " unable to find *.inf file".
View 4 Replies View Relatedi bought an Apple iMac with Airport (an inbuilt router.) I have a desktop computer (Windows XP) in another room, and also a laptop.I bought a TP-LINK TL-WN721N Wireless USB Adapter. On the Laptop and Desktop, the wireless network is working. My network's name is listed, with full strength. However, when the message Detecting Network Type comes up, the message closes with another message - "Windows is unable to connect to the selected network. The network may no longer be in range.
View 11 Replies View RelatedI provide support for a small business network. ISP: Silo Wireless (wireless point to point with ISP) Router: Cisco RV220W Wireless-N Network Security Firewall
The router is configured with two wireless access points with SSIDs: "abracadabra" and "abracadabra-guest". The only difference between these two wireless networks is their passcode. Up until now I have had no problem connecting devices to either wireless network.
My problem lies with an HP Pavilion laptop running Windows Vista Home Premium 32-bit that I'm trying to connect to the "abracadabra" wireless network.
Network and Sharing Center shows "Identifying" for a while and then shows "Unidentified network" with no local or internet access. Wireless network connection status says that Media State is Enabled, Speed is 54Mbps and Signal Quality is Excellent. Network Connection Details shows that DHCP is Enabled but it's getting an Autoconfiguration IPv4 address of 169.254.107.138...
The laptop is running ESET Nod 32 Antivirus 5 and Windows Firewall and I've disabled Windows Firewall on the Wireless Network Connection. I've also tried re-installing the wireless nic driver, it's running the latest from Windows Updates.
what really gets me is that the laptop can connect to "abracadabra-guest" fine and access the internet
I'm using a Windows 7 ASUS laptop, with a Netgear RangeMax Wireless Router model WPN824v2. I can connect to the internet when I am connected directly to the router, but as soon as I take the ethernet cable out, my computer can't detect anything. On device manager, under the network adapter tab, there are two items.Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20) Atheros AR9002WB-1NG Wireless Network Adapter.The wireless network adapter has a small yellow exclamation mark on its icon."Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)" [code]
View 4 Replies View RelatedI have a dell latitude d610 laptop...until last night, I had no problems connecting my laptop to the wireless router...then..I'm not sure what happened, but I can't connect anymore. My daughter has the same kind of laptop and has absolutely no problems with connecting...so, it has to be something with mine. It's like it doesn't know that there is a wireless connection available.
View 2 Replies View RelatedThis was for a WRT160n v3.0.02 I looked up several suggestions online and decided to update the firmware to v3.0.03 This seemed to only make it worse as I could no longer connect, and when I turned the router off and back on it would allow me in for about a minute and drop me right away.I started tweaking with the settings, and came across some posts here such as this one, started tweaking with the channel settings and everything. Nothing. If anything I somehow made it worse since now instead of dropping repeatedly it wouldn't connect at all except for about a minute after restarting router, then it would drop completely (I would either get the limited access notification or I simply couldn't connect and windows said to unplug the access point. I recalled I had another Linksys router that I wasn't using in storage, a WRT54G2v 1.0.01 so I set that up, no problems... at first. All other devices picked it up right away, but once again, my new laptop decides it's too good for the freaking network and drops it repeatedly telling me there's a problem with the access point.
So at this point I'm thinking it might NOT be my network, but my wireless card or something, I uninstalled and reinstalled, updated drivers, (I use a Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC) I even came across this article and disabled browser service and NETBios (including all other devices on my network). It brought back the network on my laptop for a bit, only to smugly come crashing down again.
Have a Compaq laptop and Gateway desktop computer. Laptop has Windows 7, desktop Windows Vista. Got a new Cisco Linksys wireless router, and trying to figure out how to set this up. Do I use the Linksys CD in the laptop or the desktop? Have DSL. Right now, the Linksys is set up on the desktop, and all is well, but need to get the laptop able to connect to internet through router. Do I need to uninstall Linksys on desktop and install it on laptop?
View 5 Replies View RelatedI am hoping to be able to connect remotely to my friend's Vista laptop (connected to the Internet via a dial-up in a developing country) from my own wireless broadband PC (Win 7).
Is there any recommended software that would enable me to do that or is Remote Desktop Connection able to do it, and what information would I need in order to be able to identify her on the Internet? I would have thought that any IP address that she can see under 'Network & Sharing Centre' or through the Command Prompt would only display the generic IP address of her ISP, wouldn't it? And would both of us need the same type of software to allow me to connect?
Windows 7 laptop does not connect to Wiress router WRT160N. It used to connect automatically for years when laptop is booted.Now Windows troubleshooting gives message to reboot wireless router. It connects automatically when the wireless is rebooted. This issue occues when the router is ON for long time ~ 12 hours or more.
View 1 Replies View RelatedI recently changed the configuration of my Aironet 1140 from WEP to WAP2-Enterprise to make it more secure. I am using the WAP as the radius server. After making the change I connected my Blackberry to the wap as well as a Samsung Chromebook. However when I tried to connect my HP laptop it is unable to connect. Watching from the Aironet's console I see that it is processing the association and windows ask me to enter my uid and password. When I do this I get an authentication error. I have tried several times adjusting parameters on windows but it always fails. Here is the configuration of the WAP:
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
[Code]....
I have a Linksys Wireless G Model WRT54G2V1 using WEP encryption. I recently added a laptop. It can access various non-decured netowrks. It can see my home network but is unable to connect despite entering the correct passcode. how to get the laptop and secured network to communicate?
View 1 Replies View RelatedI am attempting to connect to a residential wireless network on a router that was installed up by an engineer this morning.When the engineer was here he connected an HP laptop using XP to the wireless router. At first there was an issue with the connection (seemingly the same error message I am getting now), he did something to the wireless settings on the laptop, which stupidly I didn't see, and it successfully connected.When I attempted to connect my laptop to the same wireless router I got the same error message:'Connection Unsuccessful'.I clicked Diagnose Problem and got this: 'This computer has got limited or no connectivity'.I first selected the 'Automatically get new IP settings for the network adapter' but this didn't solve the problem. I then viewed the Wireless Network Security Settings and as far as I can see they are identical to those on the HP laptop that has successfully connected: [code] I then connected my laptop to the router using the ADSL cable and was able to connect to the internet, but I am still unable to get a wireless connection. When I view the wireless connections I am 'Connected With Limited Access'.
View 3 Replies View RelatedI am having problems connecting to the internet. It has never done this and just started a week ago. I contacted my ISP and they told me it is not the modems fault. I have a modem and then it goes to a Trendnet 100mpbs Ethernet Switch. Then it goes to my primary computer and then to my laptop. They are all hard-wires. I contacted Acer and they said it wasn't a problem with the computer. When I look at the control panel it says "Unidentified Network" and has no other information than that. I already attempted to manually put in the IP I should be receiving from the modem, but that did not work either.
View 8 Replies View RelatedMy laptop is unable to connect to the internet, all I keep getting is that the network cable is unplugged. I have checked all but cannot find the problem, my grandkids want to use the dreaded laptop.
View 1 Replies View RelatedSince recently I am no longer able to connect to my router from one of my laptops. The connection is failing wireless as well as by cable. My other two laptops are having no problem at all so I think it is a problem with the laptop.I check other posts and found I could do a TCP/IP reset so I have done that.If have executed these commands on a elevated command line:
- netsh winsock reset catalog
- netsh int ipv4 reset reset.log
- netsh int ipv6 reset reset.log
I have restared the laptop afterwards but the problem remains: I am unable to connect to the router.This is the output of the "ipconfig /all" command (command is ran while I've had only the adapter with the cable enabled, wireless adapter was disabled): [code]
My laptop can see available networks, but is unable to connect to any of them.I have run Microsoft Security Essentials and the scan comes back fine, ran CC Cleaner as well as Malware Bytes and those scans both come back fine as well.I have also re-seated my wifi card, as well as attempted a TCP/IP stack repair option.However none of these fixed my issue. What could be preventing my laptop from connecting to a network? I have also tried to boot into Safe Mode w/ Networking, and the pc is unable to connect there either.I have also disabled all security on my router, it is just an open network no security, broadcasting the SSID.
View 14 Replies View RelatedMy laptop is failing to connect to the internet
View 2 Replies View RelatedI'm having a big problem with my connectivity. I can connect to the internet (a BT Home Hub router) using my ethernet cable but not using wireless. My computer is searching and finding wireless networks, but when I try to connect to my router, it says limited access/connectivity.
I haven't used my computer in quite a long time (7 months) as it stopped working and is miraculously working again now (huzzah!) but the wireless does not, when it was perfect previously.
I have run IPCONFIG/ALL and the details are below. This is done with the ethernet cable attached.
---------------- Windows IP Configuration
Host Name . . . . . . . . . . . . :
Primary Dns Suffix . . . . . . . :
[Code].....
I have been unable to connect to my wifi on my laptop. I am currently using my moms laptop I know there are 3 wifi hotspots around my house. None of the hotspots show up in my network sharing, yet I'm connected to one of them right now using a dif laptop
View 1 Replies View Related
