I have a Thomson TG789vn v2 router and a weird way ISP (ASK4, UK) wants me to use it. They are telling me to connect their cable to Ethernet 1 slot and disable DHCP on the router.
When I do that some magic happens and the router no longer shows up in my Ethernet connection details, instead there is a 10.x.x.x address, I can no longer access neither the router nor the network share I had on it, when I try to ping either of those I am getting a "Destination host could not be reached" reply from the 10.x.x.x gateway. ISP also requires to register every newly connected device under my account on their portal. When I plug their cable into the WAN port I end up on an error page on their web server when I try any kind of connection. So how do I go about it to have my network share working?
I'm currently looking for a way to change all of our Laptop & Workstation (Approx 250+ machines) BIOS passwords using a remote tool if possible. The majority of laptops are Latitude and the workstations OptiPlex although most of the laptops have BitLocker activated. We also use Empirum software to push out software.
I have been looking around and into using the Dell Client Configuration Utility and also the OpenManage tool although I'm not too sure if they would work for us due to us using BitLocker.
In the bios from 745, 755, 760 and 980 is a option remote wake up: enable with boot to nic.On the bios from 990 this option is gone.Does some know how ik kan wake up my computer and start pxe.
I have a business class dell laptop that I have not used for a year or so (Dell support has expired). Last time I used it I had no problem conecting to our business/office linksys. I took the laptop home and tried to conect to a new cisco linksys e1000 wireless router (was not able to connect). As far as my laptop goes, what hardware (internal wireless adapter/etc) needs to be updated with latest drivers. Does the BIOS need to be updated? I am running Windows XP Pro. Other than the service pack (I am not at home so I can verify current service pack) what else needs to be brought up to date (hardware/software)? I have played with this for days and am done doing so until the laptop is totally made 'current". I will hard wire laptop to router to do these updates.
I have a lenovo v570 with 6gb of ram installed running windows 7 sp1 64 bit along with an intel centrino wireless-n 6150 card. After multiple fresh installs of windows 7 I have been unable to get my wireless card to work until I flashed the bios. After I start windows again I am able to use wireless, that is until I reboot. I get an error that the device cannot start (code 10). I thought there was something wrong with the hardware itself yet every single time I perform a bios flash the wireless works just wonderfully and never disconnects. I kept my laptop on for 3 days and wireless worked fine until reboot. I also noticed that it shows 6gb of RAM is available and then after the reboot I only noticed 5.92gb of RAM available. I don't know if this is a clue as to what is going on but I am investigating this matter myself now. I have yet to find any fixes and I am just looking into the matter personally as there is no reason to use an external wireless card if the internal will work properly. I refuse to be defeated by such issues. I am going to attempt to do a bios flash where I know wireless will work and use older drivers and systematically go down the line to see if a reboot makes the wireless fail on any other supported drivers. Currently Lenovo and Intel has numerous drivers and all tested have been failures so it's time to back to something older and even potentially another models drivers entirely. I would also like to point out that my bios does give me an option to enable/disable wifi as well as a switch on the laptop. I checked to see if either one of these are faulty and neither seem to be. I did notice a bug that the bios update supposedly fixed which happened to be where the boot order made a difference on whether the wifi worked or not. It seems that if the cd was in the boot order first it would prevent the wifi from working.
After installing a WMMP600N on an HP Pro 3410 (BIOS 7.04) the computer "freezes" after booting or doesn't boot at all. On the other hand, installing the same board on an HP (Compaq) DX2390 (BIOS 5.3) doesn't cause any problem: both the machine and the board work nicely together. Both machines run on Windows 7 Ultimate, with the latest driver from Linksys.
I have a problem with my thomson tg585 v7 router wich is that I can't gain access to it, each time I enter the default username and password (admin ; admin) it automaticly brings me back to the previous page.
The problem i'm having is that i'm using a 100gb capped internet plan, but after 1-2 weeks it gets all used up. After checking to see who's accessing the internet there's 2 unknown mac addresses who are constantly accessing the internet. Whenever this happens, the internet becomes considerably slower (i'm guessing they're torrenting or downloading off our internet).
I've even tried changing the wpa password but they're somehow still accessing the internet. So i've been looking for a way to ban mac adresses but i can't seem to find the option on the router.
Here's a screenshot:
YES, i know there's an option that says "Allowed on WLAN", but i cannot un-check the box for some stupid reason.
I really don't know what to do! Is there some kind of command i can type in the command prompt or something to ban mac address manually?
Ok I know you have had this question asked before but I think mine is slightly different. So, I have my Thomson wireless router for 2 years now and I've been using it with no problems at all. Suddenly I got dissconnected two weeks ago and it would not let me connect with anything. I could SOMETIMES see my home network in the list but I couldn't connect to it, although I could easily connect to other wireless networks. I tried reseting the router, changing the encryption to WEP and all that few days ago and after several tries I managed to access it (I don't know what happened) but after less than a day the same problem occured and since then I've been trying to reconnect. Yesterday I took it to the local ISP representative and he "fixed" it although I'm sure he just reseted it and changed the ancryption type and the WPA-PSK encryption key(something which I did MANY times before). When I came home I had the same problem with a slight improvement, now I could see my network in the list of wireless networks at all time. When I try to connect, the window "Windows can not connect to .....Diagnose the problem..." pops up.
It automaticly connected few times but once I tried opening the router access IP or any other webpage it just disconnected me. I tried accessing the network with my mobile(wifi) phone and I still couldnt, which made me think in the beggining that the problem is not in my computer. The router is close to my laptop and my laptop is working just fine and can connect to other networks. I've never had such problem before and I'm using the router for 2 years.
I installed the thomson router, the process was sucessfully completed however the laptop could not automatically renew the IP address and the DNS server address???
A Thomson TG585 v7 (Modem + WiFi Router) receiving a DSL connection and Providing internet access on two interfaces connection : 1- WiFi : to connect portable devices at my home. 2- 4 Ethernet ports : to connect my desktops. One of these ports on my Thomson is connected to a D-link unmanaged switch to provide extended wired connections. From this unmanaged 4 ports switch one port is connected to my neighbors in another building through UTP, and connected to a D-link DIR 605-L WiFi router, the IP address of the DIR 605-L is 192.168.1.77 and the IP address of my local Thomson is 192.168.1.254 which means they are in the same network. I need to access the DIR 605-L WiFi router from my my home where I am connected directly to Thomson router through UTP cable, I am not able to do that !! , while also I can't even ping the DIR 605-L IP 192.168.1.77.
My old router recently died and my ISP was kind enough to offer this Thomson one free. But ever since I got it, my PCs cant see each other on the homegroup. They can all get onto the internet - and by using programs like Dropbox or Teamviewer I can share info from one to the other- but I'd like to get my homegroup working again, Both my PCs are running Win 7, connecting wirelessly to the network. When trying to tracert from one to the other it gives this message: Tracing route to GLaptop.lan [192.168.1.79] over a maximum of 30 hops: 1 GDesktop.lan [192.168.1.82] reports: Destination host unreachable. The problem persists when firewalls on both PCs are disabled, and I've attempted to delete the homegroup on both PCs and re-create it.
i have configured my wireless router.But im having problems. I can connect to the the internet using a lan cable which is connected to the router. but when im using the wireless connection i do not have internet connectivity.
I have cable internet with 12 Mbit download and 1.25 Mbit upload speed. I'm using Thomson TGW850-4 router and I'm sharing the connection with my brother. Each of us have our own PC, of course.
Problem is, my brother downloads torrents while I play online games which completely screws up with my ping (from 40-80 to 350+) which makes them pretty much unplayable.
Is there a way to split the connection in two so that each of us gets 6 Mbit download and 0.625 Mbit upload at all times so that his torrents don't interfere with my online games?
I've noticed recently that my laptop keeps disconnecting from the internet via my router (Thompson Speedtouch ST585v6sl.)The light on the router that shows the connection turns red or sometimes it doesnt light up. However all the other lights stay on, it's just the internet light.It only happens for around 5-10 minutes and then after troubleshooting, disconnecting and reconnecting it's back up.I've scanned my computer for viruses and malware and nothing has come up, this is happening reguarly now about every 30-45 minutes when i'm on my pc.
I purchased a computer which has a GA-B75M-D3H motherboard in it.I have been attempting to connect it to the internet with little success. I have a Thomson TG782T modem hooked to the computer by ethernet cable. The computer does not recognise the modem and the modem does not find the gateway on the computer. I have discussed the problem with Telstra and as far as they are concerned its not their problem due to the cable showing green and amber light into the back of the computer and the modem is working. The computer guys are saying that the computer is fine as they utilised the net to load the computer.
Our ISP provided a Thomson dwg855 at installation of our service.We need greater coverage.Is is possible to use the output port on the modem to connect to a wireless router or other wired device?
I have a home network with 3 machines. In switch mode "residential gateway" I can connect to MySql on local network, but not remotely (internet). In "cable modem" I can connect to local both network and Internet, with the MySQL server, but I can only use one machine on the network.
I have opened port 3306 in Windows Firewall and the moden-router and redirected to the IP of the machine that has MySql Server. I have dynamic IP, but my ISP gives you the same IP by sector, so I can do testing.
How to get my connection to work well on local network and the Internet, using the mode "residential gateway"?
I currently have a Thomson speedtouch router that i have yet to connect to my pc as i am waiting for the adaptor for it.I use AOL adsl line aol have goiven me instructions to connect the router to my PS3 either wireless or ethernet cable.I go through all the instructins but when i finally check connection it finds ip address but the internet connection has failed ie timed out 80028E02?
I have a "Thomson TG585 v7" router I reset it and the default username is "user" and password is "admin". So after the restart I want to configure again the router so I click the "Set Up" option I click "Next" and then show me to enter again the username and password but they are not the same as the router username and password. What can I do?
I have Thomson Tg585 v7 router, when trying to add new game application to set the ports for GW2 my router just restart by it self, and i can't add the application even if i do it fast it won't take any name i try for it,even tho i did add ports for BF3 like 2months ago and it worked fine.
Life was great with my DIR-615 and Motorola Surf Board SB-5100 cable modem, but my D-Link refuses to recognize the Internet signal from the Thomson. The Comcast guy spent an hour trying to get it to work, but I'm stuck watching MLB.tv on a 24" monitor in a stiff office chair in my study, instead of on a 47" LCD in my living room. How can I force the DIR-615 to accept the Thomson ACG905? If you advise me to check settings or manually change them, please do not "assume" that I know how to access those settings.
I connect to the internet through a Thomson TG585 v8 modem. When I log in to the modem's IP (192.168.1.254?) through a browser, I only get one task available, that is "Check connectivity for this internet service". As far as I know, I should have some management options, like for example to block websites, to limit internet service for certain devices etc... Does anybody knows why I don't have these options? Could it be a restriction from the Internet Service Provider?
I have a problem.My wifi disconnects randomly sometimes and I have to restart my router every time it happens.Besides me the wifi is used by my mother and father on they're own computer.My router is Thomson ST780.
I have a thomson speedtouch ST585 router hooked up to my DSL line. I am trying to replace the wifi AP of the thomson with my linksys router (running dd-wrt). So far I have connected the linksys router (from the internet port) to the thomson router, and turned the thomson's wifi off. But, now I can't connect to the internet though the linksys router...I have tried disabling DHCP with no success?
Update:I can now connect to the internet through the linksys router, the problem now is that I cannot access the linksys's routers setup page. I can access the speedtouch's though.[URL] I would like to be able to manage all the forwarding (and the ip's) though the linksys router NOT the thomson (I want to make the linksys router the core router). I just need the thomson for my DSL line, I don't want it to do anything else but provide internet to the linksys router.
AOL are a complete waste of time and space in my opinion as for one you cannot understand what there tech support is saying and even when you email there tech support they seem to answer with a totally different answer to my questions.I have just installed a pci card ethernet connection on my pc windows xp now all I want to now do is connect and configure my router on the internet, I currently use aol dial.bb broadband adsl connection so far there are no connections from the router connected to my pc as i am still using a bt voyager 105 modem.When i did connect the ethernet cable to my pc and into the router also i connected the adsl cable into the back of the router but aol have not explained how to connect to the internet to configure this router and get it to work.
I am using a Thomson ST516 v6 DSL Modem, through which I have connected a Tenda W311R+ Wireless Router. There's two laptops, one running Windows 7 Sp1, the other running Windows Xp Sp3, and an Android based phone using this connection. I should mention that the problematic laptop had Windows 7 before switching to Xp and ran without any issues.
