3548 - Network Connection Lost
Dec 11, 2012
so I work with a debt consolidating company. We have about 300+ users, and som of the issues I get are network issues from random users. The issue is that there is a lost in connection and they are completely disconnected from the network. I look at the port number labeled at their cubicle and check the switch they are connected too and this is what I see on the switch. Which by the way is a dell PowerConnect 3548 switch.URL
After removing from those ports and placing the patch cable into another port it works normally. But after a few days this issue returns only to find it with a different user.
View 6 Replies
ADVERTISEMENT
Aug 5, 2011
my PS3 has recently lost wireless connection to my network, whenever i try to reconnect i get the following error messages. failed to get ip address, or attempt to obtain ip address timed out.i thought i would try to renew ip addresses but when i try to release ip address , via command line (ipconfig/iprelease) i get the following message. this operation cannot be performed on local area area connection while it has media disconnected.
View 1 Replies
View Related
May 11, 2011
I have a laptop running win xp. It was running fine this morning. I then brought it to a Honda dealer. The problem started there ...At first, I got a strong wi-fi signal but not network connection. I tried to repair (by right clicking on wireless network icon on the lower-right corner). The first time it seemed trying to do something but nothing worked. The 2nd time when I tried to run repair, the process hang and the machine could not be rebooted or shut off. I have to hold the power key for a few seconds to turn it off.Now, I am at home using another computer to post this message, which indicates my home lan and my router are working fine. But my laptop still has no connections - neither wired or wireless
View 4 Replies
View Related
Jan 14, 2012
I have wireless internet with a cisco valet router. My problem is that yesterday when I turned on a laptop that I use only once a week or so, now shows the signal strength of the network but I can not gain access to it. The main error message I get when I troubleshoot is that the network connection has come unplugged.Yes, I have the wireless switch turned on, on the laptop. That was the first thing I checked. I uninstalled cisco software on the laptop and reinstalled it and the laptop will not connect to the network.
View 6 Replies
View Related
Feb 13, 2012
my M5010 laptop would not connect to my wireless router. Tried resetting several times and it wouldn't work. Then I clicked on the wireless icon and it said I had no wireless. When I tried to scan for my wireless network, it couldn't find it.
I clicked the F2 button and when I highlight the enable wireless icon, it says something about it can't find Bluetooth.I am able to connect using an old laptop and my Kindle connects wirelessly, so it's not the modem.
View 1 Replies
View Related
Mar 10, 2011
I have been using the WUSB54GSC for several years with no issues until a few months ago. Periodically, it will lose connection to the network. It shows it is connected, but I can not ping the router or do anything else unless I reboot the computer. Thinking it was the WUSB54GSC (I had the Ver 1) I got a new one (a Ver 2). Same thing except now it seems to be happening more frequently (one time, less than an hour after rebooting). I have moved it to other USB ports, uninstalled and reinstalled it, everything I can think of.
View 1 Replies
View Related
May 6, 2011
I am a student pursuing a CCNA certification currently. I recently came across a lot of 3548 xl switches. They power up fine, post with out problem and load flash. The problem I am running into is that the console is password protected. I have found the password recovery procedure for this switch, but it requires the use of the mode button. I have tried this process several times and the flash file is loaded with the startup config file. How do I perform a password recovery on a switch with a broken mode button?
View 1 Replies
View Related
Nov 25, 2011
I am looking to cluster the aforementioned switches using the CLI. All the documentation that I have found all speak to performing the cluster configuration using CMS. I can only get to these switches via remote console so a GUI is out of the question for me. My ultimate goal is to configure these (2) switches for HSRP. Howver, everything that I found leads me to believe that I have to cluster in order to confiure the HSRP on these switches.
View 1 Replies
View Related
Oct 19, 2012
I have a small lab setup and I am trying to implement an IDS/IPS on the network. I have 3 VLANs setup (10, 20, and 30) with the switch and a router allowing for inter-vlan communication. Port FA 0/1 on the switch is setup as a trunk using 802.1Q connected to a single interface on the router.
I want to be able to monitor traffic on the trunk link on the switch and replicate that to the IDS/IPS host. Is there a way I can mirror traffic from FA 0/1 (the trunk link) to a regular access port on the switch which would connect to the IDS/IPS?
I have seen several articles on Cisco.com saying that you can have a source port as a multi-vlan link, but others say it is not possible. I did not have a chance to get into the lab to test this yet or else I would have.
View 2 Replies
View Related
Apr 16, 2002
I have a switched network of C2980 & C3548 switches with multiple VLANs. I would like to understand the difference between Multi- VLAN ports and trunk ports. What circumstances would dictate using one over the other? If I configure the router port as Multi- VLAN, does the router still require sub-interfaces?
View 9 Replies
View Related
Jan 27, 2013
We have purchased two new Nexus 3548 switches. According to documenation the Nexus 3K does support vPC. When trying to enable the feature I get this:
nexus(config)# feature vpc
Error: vPC feature is not supported
nexus(config)#
We are running software version version 5.0(3)A1(1) and it looks like the latest version is 5.0(3)A1(2) so that's not much of a difference.Am I missing something here?
View 4 Replies
View Related
May 13, 2012
Where I can find the visio icons for the cisco 3508, 3524 and 3548. They are NOT on the cisco visio icon download site.
View 3 Replies
View Related
Jul 15, 2011
to play Xbox Live and use my computer at the same time and all of a sudden my connection would be lost. I eventually figured out that my laptops Wireless connection being lost was completely to blame on my Wired Xbox connecting to the internet.
View 1 Replies
View Related
Oct 1, 2011
I'm not working on a computer now. This is just a question of curiosity since I am still learning networking. I did a reinstall for someone. Once they brought their computer back home their Verizon DSL connection was not working. He could not Ping Google.com.
View 2 Replies
View Related
Jun 27, 2011
I had lost power to my apartment and when everything came back on everything was working as normal...until about an hour later when my internet connection was sporadic at best. I called the ISP and they confirmed that the modem is fine. My other computers can connect to it via ethernet cable and wifi so it doesn't appear to be the router.
When I try to ping anything it seems to time out randomly.. (ran "ping Yahoo! -t1" and let it go for a while..times out every 10 requests or so).
I swapped out the ethernet cable but the LEDs on the NIC are Orange(Amber) for both cables. The wifi on the computer works fine. I reinstalled the driver for the NIC.
Computer:
Lenovo H320
Windows 7 64-bit
View 12 Replies
View Related
Mar 1, 2011
When I try to connect to the internet I get IE cannot dislay the webpage. All connections show that they are working fine. I did the repair option for my LAN, it states that it is working & shows that it's connected.I tried to sign into MSN & got no connection. I ran the repair option & got a DNS & Keyports warnings.I am running Windows XP on my home computer
View 2 Replies
View Related
Jan 26, 2011
My computer is part of domain.I have one LAN connection. IP address 172.100.40.70 ,subnet Mask 255.255.255.0, Default Gate Way 172.100.40.1Another is one internet connection through bluetooth PAN IP address 192.168.0.103, subnet Mask 255.255.255.0, Default Gate Way 192.168.0.1.Problem is when I connect to LAN, internet connection is lost. If I take out LAN cable or disable LAN, I get the internet connection. I want to keep both LAN connection and bluetooth PAN internet connection.I must keep LAN IP address without changing.
View 6 Replies
View Related
Sep 10, 2012
How can i lose the connection one particular site while i can connect to other internet sites?
View 1 Replies
View Related
Jan 21, 2011
I have a router with a motorola cable modem connected to my linksys router. In this network I have a windows XP computer wirelessly connected to the router and a networked disk drive wired to the router through a netgear switch.I am trying to move a lot of files from the XP computer to the networked drive.Everything works great as it will move files for as long as everything is up and running. As soon as I attempt to change the status of the modem from on-line to off-line with the push button on top of the modem, my XP computer loses connection to the networked drive.Why is this happening? I would think the xp computer and network drive are below the modem inside the network so losing the internet connection from the modem should only affect the internet connection
View 1 Replies
View Related
Nov 16, 2011
Yesterday after downloading something my internet disconnected from my desktop. However, the internet works fine on any other computer in the house. I'm assuming it's some sort of virus or something...I ran McAfee and it found nothing. When I tried connecting yesterday, it gave me all kinds of different reasons why it wasn't connecting when I diagnosed it. Now however, when I try to connect to it, it says the network key is incorrect, which it isn't.
View 1 Replies
View Related
Apr 28, 2011
i just recently went back to the work force and i needed to get a laptop connected to the office router..but we didnt know the password.4 hours later all we managed to do it get knocked off line on the directly connected pc..i was disgusted with the people...but i also noticed then when the typed in the ip address in the search bar it would not pull up the Admin box..it just pulled up a search result.We changed the ethernet cords back n forth..just a real mess while speaking with them.
View 3 Replies
View Related
Mar 12, 2012
I recently took my laptop (HP Pavilion) running Windows Vista, with me on vacation. I got it to work there but it won't work wirelessly now that I'm home.
View 14 Replies
View Related
Dec 6, 2012
I was trying to browse the internet earlier, and I randomly just lost my internet connection. My homepage loaded up just fine, but then I tried to go to another site. It was taking a while to load. After about a minute a page finally came up that said "Server not found" (I use firefox). I can't get on any websites now and I can't get internet on any of my wireless devices either. When I right clicked my network icon on the toolbar and clicked on diagnose and repair it said "There may be a problem with the DNS. Windows attempted to find the well known host www.microsoft.com using dns. The server responded that the name was unknown." I have Windows Vista. Now I have no idea what I could have done. I didn't do anything out of the normal, just tried to go to a website that I frequently visit with no problems and this happened. This is what I get when I type ipconfig/all in cmd prompt. [code]
View 14 Replies
View Related
Aug 25, 2011
recently I have been using my laptop downstairs where the router is in the same room, and now, when I attempt to connect to the network in my bedroom it connects for maybe a few seconds and indicates an average connection and I can also see other available networks before suddenly all connectivity is lost, I can't even see other available networks. Previously I would be able to get strong signal in my bedroom and I was able to use the internet without any fault.I have tested a family member's laptop in my bedroom, and theirs seems to be working just fine in my room. I can only use my laptop downstairs now and I need to know if this is a fault with my laptop's network adapter or if it's a problem with connection between my laptop and the router.
View 2 Replies
View Related
Dec 16, 2011
I dont have an internet connection through my computer. This one tells me error 106. I have 3 computers hooked through the same router. So, I know I have internet, as I am writing this now. But for some reason, that computer is now telling me I lost the internet connection. I have tried unplugging everything, restarting the computer, and nothing has worked. I dont know how to get the internet back on that computer.
View 2 Replies
View Related
Apr 3, 2011
My wife and I both have Win XP laptops. For some reason, one day we both lost our wireless connection. However, my wife's machine later was able to reconnect - mine wasn't. My machine sees the wireless network, sends the key, and tries to acquire the ip from the router. That's where it gets stuck. The ip address never gets updated.
View 3 Replies
View Related
Aug 18, 2011
Whenever I restart or boot my computer, it loses internet connection (Local Area Connection Unplugged). I need to unplug the cable connecting my pc to the modem and replug it until the green and orange light comes on on the area where I plug the cble to the pc w/c means that there is already internet connectionSystem:Win XP sp3 OSGigabyte S-series motherboard ma74gm-s2Amd Athlon X3 processorMotorola SURFboard SB5101U/SB5101N Cable modem
View 8 Replies
View Related
Apr 9, 2012
I have a 802.1x solution with two redundant ACS 5.2. Network A configuration use like Primary ACS-SJM and ACS-GLX like a secondary for network B configuration use like Primary ACS-GLX and ACS-SJM like a secondary. My solution was working fine about one year ago. but one week ago isn´t working fine. The problem my ACS-SJM lost connectión and user can´t authenticated when the user trye to connect to ACS-GLX either can´t connect. I have to shutdown the ACS-SJM that way can authenticate to the ACS-GLX. I check the log and I didn´t find anything I check the switch.. too where the ACS is connected. but didn´t find anything too.
both ACS have the following IOS version:
ACS 5.2.0.26.4
View 0 Replies
View Related
May 27, 2012
I have the netgear wndr4500 setup on my home theater shelves which are located in the corner of the room. When using my ASus G74sx with the Atheros 9002 wifi I consistently get disconnected. The wifi connection is lost and needs to be re-established.
Interestingly, when I am using the laptop downstairs the disconnects never happen. I have pored over my router's settings, updated to the latest firmware, as well as installed the latest drivers on the laptop. I also tried setting the router to short preamble and changing the channels to 11and automatic.
View 1 Replies
View Related
Jan 4, 2011
My problem: Shared network drive (folder), when accessed over wireless from more than 1 PC (2 or 3) simultaneously, drops everywhere with a "The specified network name is no longer available" (in Windows Explorer), or "File cannot be read" (in a program). And I don't mean accessing the same file; yes, the files I've tried with are in the same folder, but when the connection is lost a)one client is streaming video from one file and b)another client is copying over some other file to the same folder. It even happens, for example, when one client is transferring a file, and another tries to list the folder. The connection for the file transfer is immediately lost.
My setup: Home network. 4 clients (3 laptops - 2 running XP and one running windows 7, and a desktop, running windows XP). 1 server, running windows server 2003 Enterprise Edition, 2Gb RAM, 2.66 Celeron CPU, and with a 1.3 TB Shared drive partition. The idea is to use the server as a NAS. The desktop and the server are connected via 100MBit UTP/Ethernet, to a DLINK DI-604 Router (WAN port of the router used for Internet). To another one of the LAN ports is connected a Wireless router, NETGEAR WGT624 v3. Wireless connection for the laptops is established at 54 Mbits. The share is mainly used for movies and music sharing between the PCs. When using the shared drive from the desktop (or if I use a LAN cable to plug directly to the DI) I have zero connection problems. For the wireless, however, as I mentioned before, the second I do two twings on two different machines that are connected over wireless simultaneously (and I've tried *all* combinations) the connection is lost for 5 seconds, which is not significant, but enough to be annoying if watching a movie or trying to use the "robust" file transfer of Windows.
What I've tried so far: Perfmon was showing that Page Reads were high, so I upgraded the RAM TO 2Gb(previously the server had only 1Gb or RAM). I tried having each client map the drive using its own account, that did not work either. I've been dealing with shared drives a lot (on win 2000-win 2008 servers), but not nearly as bad of behavior. Worst I've had is having to remap the drives every once in a while if not used or a client gets restarted and loses the mapping. However, I've dealt primarily with sharing over Ethernet, and not WiFi. I'm not a rookie by any means (I've covered CCNA and have done quite a bit of sys admin work as a hobby) I've done all of the basic troubleshooting, the problem is very specific and not a general networking problem by any means.
View 3 Replies
View Related
Feb 18, 2013
Implement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly.
I followed this guide [TUT] Setting a static internal IP (Windows and Linux)but what has happened is that now the two machines can't connect to the internet.
View 7 Replies
View Related
Jul 29, 2012
I have just turned my PC on to find that i have lost connection to the internet through my desktop PC. I am using the wired connection to my router, and i also have my xbox connected to the router which is working ok too. My laptop also works when connecting to the router both wired and wirelesly.
My network adaptor on my desktop is a Nvidia nForce, i have tried updating the driver on this to no avail. Next i tried to ping the router but i get PING Transmit faild, error code 1231. I ran IPCONFIG /all and found that i had no default gateway set, and also it was saying that the ethernet adaptor was : Media Unoperational, but since i rebooted both the pc and router the media unoperational tag has gone.
On the network and sharing page it shows i am connected to an unidenfied network but there is a cross through the internet. It also says the access and Connection for the unitentified network are Local only.
View 14 Replies
View Related
Dec 6, 2011
I have a small network: - Domain server - Terminal Server - DB Server SQL 2008 (windows authentification) Usually, user lost connection to the domain.
View 1 Replies
View Related