Accessing Files Through Remote Desktop?
Mar 18, 2011
I seem to be having a real hard time getting the hardware for my scanner to be networked and i am trying to think of some different ways to do it and i think this might work.So our server is off site and we all access the server via remote desktop on our individual computers. ie) there is one computer that we all access with our own computers.We need our scanner to send the files to the server so that anyone logged on to the server can access it.But our server is off site and we cant connect our scanner to it.But since we have many computers here, I was wondering if there would be a way to plug the scanner in to MY computer at the office, have the offsite computer use the same remote connection to access my computer so that everyone else logged on to the server can access the folder where the scans are sent to.I know that there are ways to make my local hard drive accessible while im logged on to the server. So is there a way to allow everyone else on the server to access my local hard drives?
View 8 Replies
ADVERTISEMENT
Apr 3, 2013
I have an ASA 5505 and have a problem where when I connect through VPN I can RDP into a server using its internal address but I cannot RDP to another server using its internal address.The one I can connect to has an IP of 192.168.2.10 and the one I cannot connect to has an IP of 192.168.2.11 on port 3390.Both rules are configured exactly the same except for the IP addresses and I cannot see why I cannot connect to this one server.I am also able to connect to my camera system with an IP 192.168.2.25 on port 37777 and able to ping any other device on the internal network.I've also tried pinging it and telneting to port 3390 with no success.
Here is the config.
ASA Version 8.4(4)1
!
!
interface Ethernet0/0
switchport access vlan 3
!
interface Ethernet0/1
[code]...
View 11 Replies
View Related
Sep 2, 2012
I have mapped the attached hard drive to my EA4500 on my PC and can access folders and files on my LAN PC. However, when I come in through the Internet via an iOS device, I can see folders but when I try to enter the folder, all I get is a message that displays "|Folder|Enter Into Folder|Select|. There is no click-through capability other than "Return to Upper Folder", which takes me back to folders.
View 8 Replies
View Related
Mar 9, 2011
On wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.
View 1 Replies
View Related
Jun 6, 2012
Laptop does not work and wondering if there is any way to access the hard drive using my desktop
View 2 Replies
View Related
May 23, 2011
My aunt wants to use her laptop at the house and access her computer at the office. How do I do this? Laptop has windows 7 and office has Windows xp.
View 13 Replies
View Related
Feb 5, 2011
I got a new laptop for Christmas and set up a new router which is working fine but now I can't access the laptop via the desktop. When I click on the laptop icon on the desktop network area windows asks for a username and password which I never set up and have no idea what the are. Any step by step guide to set up my network properly so I can transfer files back and forth.
View 6 Replies
View Related
Sep 29, 2012
Don't know if in right place and not sure how to use this stuff i',m 61 and not real computer literate and don't type very well but i would like to know how to get 2 of my programs that are on my desktop and use on laptop but want to get on there with all the info in there so i don't have to retype it all again.
View 10 Replies
View Related
Jan 20, 2013
I have a laptop PC with WiFi, so I download a bunch of stuff on here. Then I have my beast/monster desktop gaming PC with a kick-ass geforce gtx 650 Ti, and an i7 processor, etc etc.... The thing it DOESN'T have is WiFi, or any internet capabilities at all (until I get a WiFi card in it or something).I have some 4 GB movies in my laptop, and so far what I been doing to transfer those movies to my desktop PC is saving it in a USB memory stick from my laptop, then taking the memory stick to the desktop PC and saving it there. I have regular Ethernet cables, would that work? What do I need to do to transfer files from my laptop to my desktop PC more efficiently and fast?
View 5 Replies
View Related
Mar 21, 2011
I have a small home network set up: desktop, wireless router, printer, netbook, two set-top boxes, visiting(!) laptops. Until recently, it worked fine, then two things happened.
1 - everything on the Internet went VERY slow and call to my ISP resulted in a new router.
2 - I also subscribed to McAfee Home Protect through my ISP rather than ther free AVG.
Since then, I have been unable to share the files on my desktop with my netbook; it can not see them on My Network Places.
View 1 Replies
View Related
Aug 31, 2011
I have a Toshiba Win 7 laptop and a custom-built (JNCS) XP desktop. Both access the Internet thru a D-Link router. I would like to be able to access the working files on each computer from the other. I have changed the workgroup name on my Win 7 laptop to the same name as the workgroup on my XP desktop. I have gone thru the instructions Microsoft gives you, but they are FAR from clear because things don't happen or choices are not available that they reference.
View 7 Replies
View Related
Aug 5, 2011
I have been trying to share drives between my dekstop and laptop using a router. I have connected both PCs to the router and has made changes to the file sharing enability to both. However, when I changed the ip address to 192.168.1.1 and 192.168.1.2 respectively, the one using the ip add 192.168.1.2 could not access internet. And if I set both to default networks, my laptop failed to see the shared drive.
View 3 Replies
View Related
Jan 19, 2012
how to transfer files from Desktop (XP) to Laptop (XP). I am using a Netgear Wireless G router WGR614 v9
View 1 Replies
View Related
Apr 2, 2012
Trying to figure out how to configure the VPN client side to access a remote LAN.
Lan A - 172.16.17.0 - ASA5505 8.2(3)
Lan B - 200.200.0.0 - ASA5510
Cisco Client - V5
At present there exist a VPN tunnel between LAN A and LAN B. The client has a VPN tunnel to LAN A to run software package X on the LAN A server. The client also needs to run software package Y which needs access to a database on LAN B. The computers on LAN A have no problem using package Y since a VPN tunnel exist between LAN A and LAN B. How can I get the Client to also access LAN B on the same tunnel created when the client connects to LAN A? I can't seem to get packets that are directed to LAN B to cross the Client tunnel to A which would then hopefully move onto the LAN A/ LAN B tunnel.
View 2 Replies
View Related
Apr 19, 2011
Recently my laptop, which is successfully connected to the wireless network, has failed to recognize shared folders on my desktop and the external hard drive connected to it. Laptop running 7, desktop running XP Pro. 2 days ago it was working fine. Yesterday it stopped working. I have made no changes that I can think of. All of the folders on the desktop and external drive that I want shared are set up for sharing. So, my question is, what do I need to do to again be able to read and write to these folders, especially the ones on the external hard drive. I believe the adjustment has to be made on the desktop, either in the network connections or the file sharing, but the laptop may need adjusted as well.
View 14 Replies
View Related
Sep 7, 2011
I can't access my wireless laptop files from my wired desktop. I have tried to set up a homegroup, and it actually worked for a week or two, but now we are unable to access the homegroup or the printer.
View 1 Replies
View Related
Nov 25, 2011
I got a strange incident happening to my work computer. Whenever i step away from my desk and come back only to find Icons of files mapped to other network drives other than my local drive have disappeared from desktop. I have to restart my computer to get these back. It only happens when i have walked away from my PC and I have verified that no one has sat at my desk to use my computer while I'm away. The other PC are also networked to the same servers as mine and theirs are not affected at all.
View 1 Replies
View Related
May 16, 2013
i have router 2911
pub ip: 121.97.65.61-74
interface gigabitethernet 0/1
ip address 121.97.65.61/28
[Code].....
and other ip will drop/kick/disconnected automatically
how to implement this on access list
View 6 Replies
View Related
Aug 8, 2012
how I may be able to delete files beyond recovery from a remote computer.
View 7 Replies
View Related
Mar 28, 2013
I recently installed a couple of Cisco Aironet 3600 Series Wireless Access Points at a remote site. While I was at the site everything seemed OK, The clients were able to get connected to the access points, the guest network worked fine, I could SSH into the access points, and I could ping them. The problem is when I went back to my home site I tried to SSH into the access points through an ASA IPSec VPN Tunnel and it couldn’t find it. When I try to ping the access points they “time out”. I can ping and connect all other addresses (via RDP, HTTP, etc..) on the same subnet which should rule out an access list problem. A couple of notes to be aware of:
The WAP’s have the Autonomous IOS installed (Version 15.2(2)JB) The WAP’s are connected to Dell PowerConnect 5724 (Not by choice.. We are a Cisco shop, these were already there and have plans this year to replace)
I can ping and SSH with Putty to the WAP’s from the local subnet I cannot ping or SSH from a remote subnet to the WAP’s. I can access all other IP’s and Computers from a remote subnet.
View 12 Replies
View Related
Feb 12, 2012
I'm accessing a NAS server remotely through VPN (Netgear FVG318). I can connect to the NAS server but it is very slow when opening and saving documents. When accessing the network drive I am connected to the Internet through wireless connection. When I connect to the Internet through Ethernet cable opening and saving documents is much quicker. Is there anyway I can make the remote access quicker when accessing it through a wireless connection?
View 1 Replies
View Related
Jan 2, 2012
Have just been trying to install Remote Desktop between two XP pro laptops When I try to log on I get a black screen with the connection bar at the top with the name of the remote computer and after about thirty seconds it drops the connection. The remote laptop comes up with logon screen but it isn't visible on the on host machine.I have followed all the instructions including file sharing enabled remote accesss etc, Both machines show up on network map and can ping each other.
View 2 Replies
View Related
Jan 7, 2012
To use Remote Desktop Connection, is it really this easy:Open up remote desktop connection on your Host PC --- type the IP of the computer you want to access, then click connect --- As long as "Allow Remote Desktop" is enabled on the PC you are trying to connect to, your attempt will be successful
View 1 Replies
View Related
Nov 20, 2011
i want give the dos printing from remote desktop to local computer on anotherlocation
View 2 Replies
View Related
Mar 8, 2013
We have a server which in addition to other services is used to stream live hi-def video from our building during special events.We use a software video/audio production mixer which works very well. But we now would like to make a change in the system.Is it possible/practical to use Remote Desktop via the second - as yet unused - LAN in our server. We really would like to put the operators in a different location where they have both video and in-person view of the event being streamed. But we don't want to use more bandwidth on the LAN...the production mixer handles a *lot* of uncompressed video and tends to be a bandwidth hog.
View 4 Replies
View Related
Sep 20, 2011
Can i build a Server through Remote Desktop using VPN, how will be the performance? Is it advisable ?
View 1 Replies
View Related
Feb 14, 2012
Is to possible to connect to someone's computer via remote desktop connection w/o them finding out what my ip is?
View 4 Replies
View Related
Dec 28, 2011
I have a home network and I routinely connect from my laptops to my wired desktop via Remote Desktop. Routinely, that is, until I replaced my old wireless router with a D-Link Wireless N router. But now, after the change, I can no longer remote desktop in. I *am* able to ping and file share with that computer, just no remote desktop.
View 3 Replies
View Related
May 19, 2011
The other computer running XP connects to the server through remote access but the one running windows 7 does not
View 1 Replies
View Related
Jan 15, 2012
We use Nortel VPN and the problem is that it's set so when you connect to it, you can only access company resources so no Internet. To mitigate that we use vmware and run Windows XP at the same time as our Windows 7 systems. I'd love to be able to use remote desktop though and connect to a system located elsewhere even another office computer and have that one on the VPN, but of course as soon you connect the remote desktop connection goes down with it.I'm just wondering if there's any ways around this. I'm assuming not, but I'm not sure how VPN fully works. Like if I had 2 network cards in the remote system, when I VPN in does it block connections from all network cards? Ideally I'd like to use something like Amazon Web Services since their Windows Server tier has the free option which is good, or will use another VPS type system running Windows Server.
View 3 Replies
View Related
Apr 5, 2011
I opened a computer in other network via remote desktop(because I forwarded port in router)....and tried to access other computers in the network via remote desktop again from that computer but after I done, I don't know how to close the secondary remote desktop. There was one close button on the top, but if "close" it, whole rdp connection was closed. The secondary rdp connection is still open in the computer.
View 1 Replies
View Related
Feb 7, 2012
I have a PC behind a DSL router. In my PC (WinXP SP3) I have a virtual machine also running WinXP SP3. I would like to access the VM via remote desktop. Since I have a dynamic IP, I use the(url)tool to solve the problem. I installed the no-ip sync tool in the VM. Now when I write my no-ip address in the remote desktop from my office, I will access my host system, and not the hosted VM. Does any knows how I should configure things in order to get access to the virtual machine and not to the host machine
View 5 Replies
View Related
Feb 10, 2012
I have some iMacs that I manage for, in addition to my primary PC computers, such as my Toshiba Windows 7 laptop, which is what I am currently most concerned with. What I would like to do, is Remote Desktop Control (I'll abbreviate that as RDC) these mac computers through the network from my Windows PC. I am aware that this is possible with either Google Chrome, or by checking an OSX setting that will allow for VNC applications to connect, but I would prefer it if there was some way to RDC these iMacs from my Windows laptop without needing to change their settings or install software-something like how Mac-Mac RDC connections work, where I can just select a computer from the network, type a password, and go.
View 1 Replies
View Related
