Can't Setup Network / Internet Connection

Nov 13, 2012

I've been watching my PC-s HDD for months and I saw that something takes up way to much space, yesterday I checked and Windows said that I have 160 GB Free / 883 GB But when I selected all files in my E: even hidden files and checked their properties / size, it said its only 440 GB. So I was missing another 283 somewhere in this partition. I used the windows cleanup tool and it gave me back some of the space, but it wasnt 283 GB. I checked and checked, then I found a program called WinDirStat which shows you how much space you have and stuff, then I found this: [URL]Then I found out that WinDirStat cannot access the System volume informations and this unknown is that. Then I googled stuff up again and found this:

Code:

1. To see the space allocated and used for SVI:

- Open Command Prompt with �Run as Administrator� option

- Type in: vssadmin list shadowstorage

- You will see Used Space, Allocated Space and Maximum Space for SVI

2. To see the restore information stored therein:

- Use in the same console command: vssadmin list shadows

3. To resize the maximum allocated space:

- Type in command: vssadmin resize shadowstorage /on=[here add the drive letter]: /For=[here add the drive letter]: /Maxsize=[here add the maximum size]

- E.g., vssadmin resize shadowstorage /on=C: /For=C: /Maxsize=4GB

- You will see a prompt confirming resize done

- You can check the status again using the command discussed in point 1 above

4. Just to get rid of the space already consumed, but sticking to the same size of max-size as before:

- Do actions as per point 3 to set the max-size t, say, 1GB

- If you check now, most likely you�ll see that used space is now 0KB

- Do the resize again and set it back to what it was before

- Check your disk space availability in Windows Explorer, you should see the reclaim is done!I did what this guide said and it deleted the system volume information from my E: drive and I had my 440 GB back. BUT!At this part I HAD internet connection. I shutdown the PC, went to eat and do stuff, then I came back and got a blue screen right after the win7 logo (before the log in screen)I couldnt read what it said, because the PC restarted itself (even tho it is set NOT to restart so I can read the errors...wierd!)Then it started repairing itself, restarted, asked for a chkdsk, fixed millions of errors then restarted and I logged in just fine.But in the bottom right corner I seen a big ugly red X over my network connections, so naturally I went out my room, restarted modem and router then came back. Waited some mins, checked the modem and router again but they had internet. I started my sisters PC and her PC had internet.I checked everything I could, but I couldnt revive the internet, I cant join to any network (home, private, work) and I cant even see any. I only see dial up connections, hamachi and tunngle.Then I tried to resintall the driver. Deleted driver, restart PC, win automatically installed the nvidia driver for me, but still no internet. Then out of couriosity I started my Virtual PC (win xp) to check if it has internet connection or not. And it has! I am writing from the Virtual PC now.So the network card is working perfectly, no hardware damage.I googled stuff up again to find a solution and then I found this thread: Loopback Pseudo-Interface 1I did what it said there and my result was different:

Code:
Windows IP konfigur�ci�
�llom�sn�v. . . . . . . . . . . . : Dezix-PC
Elsődleges DNS-ut�tag . . . . . . :
Csom�pontt�pus. . . . . . . . . . : Hibrid

[code]....

View 19 Replies


ADVERTISEMENT

TP-Link 150Mbps Wireless :: Setup Adhoc Network Using TL-WR740N Without Using Internet Connection?

Feb 21, 2013

Region : India
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :

how to setup an adhoc network using TPLINK WR740N without using any internet connection?I want to setup a WLAN connection between my Desktop and 2 other Laptops for file transfer and sharing.... how to search and connect to other available wifi networks using my router?

View 3 Replies View Related

Home Network Setup - Speed Up Connection?

Feb 10, 2012

I have connected my Vista laptop to my old XP laptop using a network cable so that I can share files, printers, etc freely.I have forgotten the correct proceedure for doing this, although the two computers eventually, after a long time link up and I am able to share files. I have done nothing else. I have not entered numbers or anything. The number spaces are blank.I do not understand why it is working at all, but how do I speed up the connection?

View 14 Replies View Related

Network Setup When More Than One Website On Same Vdsl Connection?

Mar 26, 2012

I am trying to design a network for our block of 20 apartments. The WAN supplies Ultima at up to 40 mb/s and the takeup on LAN is anticipated to be modest. However I have been told that two residents operate non commercial web sites currently on stand alone adsl with ddns. The netgear router supplied by the ISP obviously has port forwarding but how do I differentiate for traffic on port 80?

View 1 Replies View Related

Error - Windows Could Not Setup Internet Connection?

Mar 14, 2011

I m facing Internet sharing problem in windows 7, when I m creating wireless adhoc network, so that on other(wi-fi enabled) system, I can use internet, At that time error like' Windows could not setup internet connection sharing' appears...

& after pressing ok... when I m doing it mannually( By going to the Properties of local area network-> then in Sharing tab option ] when I m selecting checkbox for internet sharing at that time error comes like' An error comes while internet connection sharing was being enabled The dep[endency service/group failed to start '

View 2 Replies View Related

Setup Wifi At Home With No Internet Connection?

Jan 29, 2012

How do I set up wifi at home if I don't have internet at home? would the mifi from virgin mobile work?

View 1 Replies View Related

How To Setup Wireless Internet Connection On Dell 630

Sep 22, 2011

I have purchased a second hand dell 630 that has been wiped clean, I have installed the set up disk, but cannot connect to the internet

View 1 Replies View Related

Two Internet Connection (same ISP) To A Single LAN (8 Computers With Server Setup)

Aug 9, 2012

I have 2 internet connection with the same ISP, SmartBro 2mbps.We have 7 computer unit plus 1 unit that will serve as the server.Is it possible that we combine the two internet connection into just one LAN so that all PC's will see each other. Mainly for network gamesBTW, we don't have any routers or switch yet.

View 5 Replies View Related

Home Network :: Setup A Remote Desktop Connection For 3 Computers?

Apr 28, 2011

i want to setup a remote desktop connection for 3 computers on the same network to connect to remotely. Originally i was going to port forward the original windows RDP port and run the windows rdp service but learnt that XP Home Edition doesn't support this feature. I want to be able to log onto these computers at any time remotely with the need of accessing the computer before i connect.

View 2 Replies View Related

Westell 7500 / Setup An Internet Connection To My Directv Hd Receiver?

May 30, 2012

I have a Vizio smart tv with built in wifi. I have Centurylink dsl service with a Westell 7500 gateway. All of my wifi devices, including my tv can access the internet appropriately. I also have a wii connected to my tv which can access the internet via wifi. My question is---is there anyway to setup an internet connection to my directv hd receiver using the wifi connection through my tv or wii? I really do not want to buy anymore equipment and I only have one phone line run with dsl service.

View 1 Replies View Related

Linksys Wireless Router :: Cannot Setup E4200 - No Internet Connection

Aug 9, 2011

I just purchased e4200 from a friend of mine. Got an issue with setup of this device. I use a model from internet provider. Have 2 computers at home. One is pc with cable, another one mac with wireless.SO my issue is that i can not connect none of them. I was trying to use cd that comes with router but he can not locate a router. When I connect cable directly from modem to computer everything works fine. As soon I connect cable to a router I can not see a router and I can not connect to internet.

View 1 Replies View Related

Linksys Cable / DSL :: WAG320N / Setup Connection Between Routers Over Internet?

Apr 26, 2011

Is it possible to setup a router to router connection over the internet with fixed IP Addresses with two WAG320N?

View 3 Replies View Related

Broadband :: Setup Internet Connection For Every System With BSNL DHCP Modem?

Jul 3, 2011

I have 3 systems in my office, LAN connected. how to setup internet connection for every system with BSNL broadband DHCP modem.

View 2 Replies View Related

Linksys Wireless Router :: WRT54GC - When Run Setup CD Cannot Locate Internet Connection

May 6, 2009

When I run the setup CD the router cannot locate the internet connection.  I'm using a Motorola Surfboard modem. My local PC works fine on the internet.  My remote wireless PC shows limited or no connectivity.  I have switched out the Ethernet cables with no luck

View 5 Replies View Related

Dell :: Dimension 5150 - After Windows XP Reinstall Cannot Setup Internet Connection

Oct 15, 2012

Recently, I re-installed windows XP on a newly formatted hard drive.  I tried to use the network setup wizard to create an internet connection via  a cable plugged into back of pc but the wizard says that it can not detect network hardware.  I believe the network card is built into the Motherboard. I tried to isntall drivers from the Dell Cd that came with the system but it fails to detect a modem. My system is a Dell dimension 5150?

View 3 Replies View Related

How To Setup A Network For IP Cameras Through Internet

Oct 19, 2012

I have a set of 5 IP cameras running on a server at my shop, I am using the AXXON software to run it. When I install the Axxon Client software on my laptop on connect wirelessly while in the shop, it automatically sees the server and connects.

However, when I bring my laptop home it does not connect (obviously). Instead of the servers name (which is what it looks at while on the network) I can input an IP address instead.So I input the IP of the WAN the server is on (found via IPChicken.com) and try to connect... it does not.

View 3 Replies View Related

Network Setup For An Internet Cafe

Aug 20, 2011

Customer wants a network set up for an Internet cafe business..Broadband line is active, 1 Server + 9 PCs are waiting to be used, 2 switches have been ordered and of course cabling.If all computers are identical I will install and configure it with all that is need then clone the drive to the other PCs (I know what needs to be done in terms on the PCs e.g XP Pro/Office 2007/AntiVirus)I will be using this free Net cafe software, if you know a better and easier one to use that would be great:Internet cafe software by CyberCafePro

So my mine concern is the the networking configuration itself I know that the PCs have to given workgroups that's easy but in terms on the netgear router will it router the connection automatically as will the switches?Like I said its the small things that will be a pain, I know the job of switches is to automatically router the data.

View 3 Replies View Related

Linksys Wireless Router :: Reset WRT300N To Default Settings To Setup Internet Connection

Mar 29, 2012

I've just managed to reset the WRT 300N to default settings and have setup the internet connection etc and home network ... BUT no matter how I've fiddled with the wireless settings I cannot get any of the laptops or mobile phones to connect wireless to the network.The Windows software on the laptops 'finds' the router OK but for some reason the router seems unwilling to supply an IP address.I've checked ALL of the settings that I can think of, and all are correct ... well, all are exactly the same as my old router which worked perfectly.

View 4 Replies View Related

D-Link DCS Network Camera :: How To Setup 920 To View From Internet

Mar 12, 2011

I have successfully setup the camera at home, that I can use the mydlink website to view. But when I go to work and open my IE to view, it does not connect to the camera. Do I know to do something at the router to make it unblock or some sort?

View 1 Replies View Related

Home Network :: Wifi Internet And Wlan Setup With Printer?

Sep 18, 2012

I'm newbie in Networking. I want to establish a small WLAN network where all the laptops (6 laptops) can use WiFi Internet and also can print via a network printer.I have these hardwares:1: DSL Modem2: A Belkin F5D8233-4 300 Mbps router3: A Network printer (with RJ45 ethernet port, Not wireless printer)4: LAN Cable (if needed)5: Finally 6 Client Laptops

View 4 Replies View Related

Setup 2 Network Cards In Server 2008 R2 To Access Internet For Lan?

Sep 2, 2012

My Windows Server 2008 r8 has 2 network card

1st card I have connected to Internet Router

2nd card I have set up the LAN to access the database application from server with 2 clients.

Question

1) Currently 2 clients can't access the internet

2) How to setup the 2 clients to be able to access to internet?

View 1 Replies View Related

Routers / Switches :: Setup A Vlan To Access Internet Not Network?

Nov 7, 2011

I have a Dell switch setup with 2 Vlan's. Vlan 1 is to the network. Vlan 20 is going to be for wireless access to the internet. How do I configure the switch/router so that Vlan 20 only connects to the internet and not the network? I will later want to have a 2nd SSID that I want to connect to both the internet and network.

View 5 Replies View Related

Linksys Wireless Router :: E1000 - Home Network Setup Without Internet?

Dec 25, 2011

Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?

View 2 Replies View Related

Belkin Routers :: Can N150 Setup To Just Run Private Network / Not Connect To Internet

Nov 5, 2012

Can the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.

View 1 Replies View Related

Linksys Wireless Router :: Home Network E1000 Setup Without Internet Access?

Aug 3, 2011

Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?

View 3 Replies View Related

Sharing :: Change Network Settings So Internet Connection Appeared As Public Network

Jan 25, 2011

I use my desktop for streaming media throughout the house. I found it was causing lag for gaming most likely because it was taking up all the bandwidth for the router. We had a 2nd router laying around as well as a 2nd wireless adapter so we set up a 2nd network that was not connected to the internet for strictly media streaming.I attempted to change the network settings so the internet connection appeared as a public network so that streaming of media was hopefully diverted to the non internet wireless adapter.I want a faster way of transferring large video files from my laptop to my desktop. I recently bought a crossover cable to do this through direct connection.Both use the same user name and password as well as run the same win 7 pro however the desktop is the 64 bit version. I set up both ipv4 with the same addresses.When it has worked I am only getting a connection speed of just over 10mb and once I connect the crossover cable between the computers it knocks out my internet connection on the wireless card.

View 5 Replies View Related

Can't Connect To Any Internet Connection And My Own Network Is Down

Nov 1, 2012

My wifi is enable but I can't connect to ANY internet networks and my own network is down. There is a cross through the symbol.I have even tried looking and checking my network through the control panel and instructions but no avail.

View 1 Replies View Related

No Internet Connection Over LAN - Unidentified Network

Aug 2, 2012

Hardware info:

Computer: Dell Inspiron 14R SE
Ethernet card: Atheros AR8161/8165 (NDIS 6.20)
Cable is a CAT cable plugged into a wall socket.

Symptoms: No internet access, and network is displayed as "Unidentified Network".

Steps taken:

1. MAC address for the Ethernet LAN adapter given to sysadmin
2. TCP/IP reset. Winsock reset. DNS flush.
3. Uninstalled/reinstalled device drivers
4. Disabled ipv6
5. Complete system wipe, restore factory image
6. Checked device manager, all running properly.
7. Repeated steps 1-4 after wipe. No firewall, Windows Firewall is off.

Sysadmin checked the system, nothing out of the ordinary- it should be connected but it isn't. DCHP etc enabled. Said the sniffer on his end not picking anything up.

ipconfig/all:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Users
v92>ipconfig/all

[code]....

Since I can tether the laptop to my Android smartphone through WiFi with no problem I am contemplating setting up a wireless router to solve the problem.

View 1 Replies View Related

No Internet Connection And Unidentified Network?

Mar 17, 2011

I am also running Vista with Avast and 3 days ago it just stopped connecting to the internet and told me there is an unidentified network / local area connection only

I have actually restored to a point a long time back now, before I had avast and the problem still persists.

In device manager I have the 6to4 adapter with a yellow triangle next to it with an exclamation mark. Not sure if this is relevant as many posts I've seen elsewhere seem to say that you can ignore that, as the 6to4 is not what is used in connecting to the internet

View 14 Replies View Related

Can't Get Internet Connection Over Wireless Network?

May 3, 2011

i came home today to find my laptop has no internet connection, but it easily connects to my wireless network, i called my isp custommer support and i find that the only way i get a connection is a directly wired one from my modem, wich is pretty inconvenient, its not just my laptop that cant connect, as my other one cannot either, i have tried resetting my router as well as trying a completly different wireless router and i have the same issue with both, is something scetchy going on with my computers? or am i really that unlucky to be in possesion of 2 routers that broke down at the exact same time o.o

View 1 Replies View Related

Vista No Internet Connection And Unidentified Network?

Mar 13, 2011

My Computer has been working perfectly fine, the connection super and the network perfect. But for some reason I go to sleep everything's fine and now zilch. It say's im connected to my network but that it's unidentified and I can't get on to my Internet. It's just that computer though, everything else like this laptop can connect to the network and the internet. No changes were made so i'm really not sure what has caused this. Nothings new either. My signal strength is excellent as well. Password Protected sharing has been off, has this compromised me?

View 6 Replies View Related

Internet Connection Drops But Still Connected To The Network

Dec 13, 2011

no matter what device is used to connect to our Linksys WRY54G v2.0 Router, whether it be CAT6, internal wireless card (Intel Wireless LAN (802.11a/b/g/n), or USB wireless card (Linksys AE1000), she drops connections at random and frequent times and has to disconnect the device and reconnect to get internet back. She is still connected to the network though. The issue has been becoming more and more frequent the past few days and has been ongoing for a few months. We are at wits end with the issue. I looked on Linksys' website for updated firmware for the router AND the AE1000, no new firmware and same driver that is installed for the AE1000. We have tried to enable Multimedia Environment, Disable 802.11, unchecked "Automatically turn off device to save power", changed router channels from 6 to 1, have uninstalled ALL third party firewalls and AV/Spyware/Malware/Adware removal programs (but not before scanning the system), and lastly tried the DHCP Braodcast Flag Fix.

View 19 Replies View Related

Broadband :: Having Two Internet Connection On Single Network?

Oct 6, 2012

i have a BSNL Broadband connection (1st Connection- input via RJ11-telephone line) thru ADSL2 + modem and now i have another Internet connection provided by another ISP(2nd Connection input via DSL - RJ45) thru Asus RT-N10E WireLess router for backup in case 1st ISP fails. now when 1st fails i have to switch to 2nd one manualy.s there a way by which my computer could switch over automatically to 2nd or visa versa to have a seemless connection.2nd issue related to it is that i have my n/w sharedrive and n/w printer connected (Wired) thru 1st Connection. when i switch to 2nd Connection i can only access internet connection but the n/w printer and shared drive are not available.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved