Customer wants a network set up for an Internet cafe business..Broadband line is active, 1 Server + 9 PCs are waiting to be used, 2 switches have been ordered and of course cabling.If all computers are identical I will install and configure it with all that is need then clone the drive to the other PCs (I know what needs to be done in terms on the PCs e.g XP Pro/Office 2007/AntiVirus)I will be using this free Net cafe software, if you know a better and easier one to use that would be great:Internet cafe software by CyberCafePro
So my mine concern is the the networking configuration itself I know that the PCs have to given workgroups that's easy but in terms on the netgear router will it router the connection automatically as will the switches?Like I said its the small things that will be a pain, I know the job of switches is to automatically router the data.
i was able to network my window xp pcs with easy. I control my cyber cafe with handy cafe and it wporks on my xp pc using a switch.(Dlink) My challenge is now how to network window 7 OS pcs that are directly connected to a wireless router for internet. All the systems browse wirelessly via the router but i can't share filesMy major problem is our to use handy cafe to control the systems(15pcs)
Recently returned from a holiday where thee were various free wifi hotspots. Some needed a password which the cafe just gave you if you asked, others were open. My laptop connected without any problems at all these places except one. Other people at the same cafe did not have any problems but mine would not connect - kept receiving messages about certificates. The cafe owner even tried and could not connect to my laptop. My laptop found the signal okay..
I've been watching my PC-s HDD for months and I saw that something takes up way to much space, yesterday I checked and Windows said that I have 160 GB Free / 883 GB But when I selected all files in my E: even hidden files and checked their properties / size, it said its only 440 GB. So I was missing another 283 somewhere in this partition. I used the windows cleanup tool and it gave me back some of the space, but it wasnt 283 GB. I checked and checked, then I found a program called WinDirStat which shows you how much space you have and stuff, then I found this: [URL]Then I found out that WinDirStat cannot access the System volume informations and this unknown is that. Then I googled stuff up again and found this:
Code:
1. To see the space allocated and used for SVI:
- Open Command Prompt with �Run as Administrator� option
- Type in: vssadmin list shadowstorage
- You will see Used Space, Allocated Space and Maximum Space for SVI
2. To see the restore information stored therein:
- Use in the same console command: vssadmin list shadows
3. To resize the maximum allocated space:
- Type in command: vssadmin resize shadowstorage /on=[here add the drive letter]: /For=[here add the drive letter]: /Maxsize=[here add the maximum size]
- You can check the status again using the command discussed in point 1 above
4. Just to get rid of the space already consumed, but sticking to the same size of max-size as before:
- Do actions as per point 3 to set the max-size t, say, 1GB
- If you check now, most likely you�ll see that used space is now 0KB
- Do the resize again and set it back to what it was before
- Check your disk space availability in Windows Explorer, you should see the reclaim is done!I did what this guide said and it deleted the system volume information from my E: drive and I had my 440 GB back. BUT!At this part I HAD internet connection. I shutdown the PC, went to eat and do stuff, then I came back and got a blue screen right after the win7 logo (before the log in screen)I couldnt read what it said, because the PC restarted itself (even tho it is set NOT to restart so I can read the errors...wierd!)Then it started repairing itself, restarted, asked for a chkdsk, fixed millions of errors then restarted and I logged in just fine.But in the bottom right corner I seen a big ugly red X over my network connections, so naturally I went out my room, restarted modem and router then came back. Waited some mins, checked the modem and router again but they had internet. I started my sisters PC and her PC had internet.I checked everything I could, but I couldnt revive the internet, I cant join to any network (home, private, work) and I cant even see any. I only see dial up connections, hamachi and tunngle.Then I tried to resintall the driver. Deleted driver, restart PC, win automatically installed the nvidia driver for me, but still no internet. Then out of couriosity I started my Virtual PC (win xp) to check if it has internet connection or not. And it has! I am writing from the Virtual PC now.So the network card is working perfectly, no hardware damage.I googled stuff up again to find a solution and then I found this thread: Loopback Pseudo-Interface 1I did what it said there and my result was different:
I have a set of 5 IP cameras running on a server at my shop, I am using the AXXON software to run it. When I install the Axxon Client software on my laptop on connect wirelessly while in the shop, it automatically sees the server and connects.
However, when I bring my laptop home it does not connect (obviously). Instead of the servers name (which is what it looks at while on the network) I can input an IP address instead.So I input the IP of the WAN the server is on (found via IPChicken.com) and try to connect... it does not.
I have successfully setup the camera at home, that I can use the mydlink website to view. But when I go to work and open my IE to view, it does not connect to the camera. Do I know to do something at the router to make it unblock or some sort?
I'm newbie in Networking. I want to establish a small WLAN network where all the laptops (6 laptops) can use WiFi Internet and also can print via a network printer.I have these hardwares:1: DSL Modem2: A Belkin F5D8233-4 300 Mbps router3: A Network printer (with RJ45 ethernet port, Not wireless printer)4: LAN Cable (if needed)5: Finally 6 Client Laptops
I have a Dell switch setup with 2 Vlan's. Vlan 1 is to the network. Vlan 20 is going to be for wireless access to the internet. How do I configure the switch/router so that Vlan 20 only connects to the internet and not the network? I will later want to have a 2nd SSID that I want to connect to both the internet and network.
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
Can the N150 be set up so that it just runs a private network - not connect to the internet? The auto-setup doesn't seem to work without a modem attached to it and I don't want it to be hooked up to the outside world, just a few computers and a NAS device on a private net.
Was told by a HP technician that I could setup a .wireless home network for the purpose of having my iPad and iPhone 4 connect to my D100 HP printer. Installed the disc that came with my router and can't get passed the point that requires a password. All my devices recognize the router but everything requires a password which I am able to provide. Can this router be setup without having Internet access if so then how?
Region : India Model : TL-WR740N Hardware Version : V4 Firmware Version : ISP :
how to setup an adhoc network using TPLINK WR740N without using any internet connection?I want to setup a WLAN connection between my Desktop and 2 other Laptops for file transfer and sharing.... how to search and connect to other available wifi networks using my router?
I want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..
i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
I am having problems setting up a network, recently bought a used linksys router and had to restore to default settings. Now I am trying to set it up but I cant go to the ip 192.168... it times out, but when I go online and do the same thing I get a FW-1 at checky: Access denied. error. This is obviously my first time setting up a network using a router. what am I doing wrong? I checked drivers and I have tried plugging the cat5 into both internet and the 1st and 3rd port with little success, either a timed out connection or an error.
I have been started one cyber cafe with 8 computers and my net connection is Bsnl FTTH fibre optics line ok.my network is assigned by dhcp from bsnl that means dynamic ips.my net connection is like this internet-->Modem-->Hub(8 ports)-->8 computers.i want to make one pc as server and controlling other all pc's.i know little about windows 2003 server in dynamic ips can i make this or not or how to use static ip for my network.
We want to set up VPN network. What are the first few steps I should follow? Should I need to contact first my ISP if they provide VPN server details? Or should I need to set up VPN server myself?
I have a Time Warner Cable business class service with no static IP, with a wireless modem which is plugged to a CAT5 distribution panel. On the jacks (2 other rooms on the house) I have a Linksys E3000 and a Linksys Valet router for signal boost and gadgets usage (TV, cameras, etc).The main router (TWC) has it's own external IP which TWC assigns to me and internally distributes via DHCP the range 192.168.0.x. With that said:
- The E3000 has a 192.168.0.6 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address - The Valet has a 192.168.0.7 IP -- this is fixed setup on the TWC router (ubee brand) by MAC address - The main router has the 192.168.0.1 as the gateway and web-interface
Whenever I connect something to the E3000, it is distributing the 192.168.1.x range and the valet 192.168.2.x range.That works perfectly for my home based business until I decided to use more stuff on the network such as a IP printer, IP cameras, etc.
- The IP cameras are connected to the E3000 due to signal strength and I have manually assigned them the 192.168.1.15 and 192.168.1.16 IPs and ports 9001 and 9002.
- The printer is connected to the E3000 and I have manually assigned the IP 192.168.1.30.
Issue 1: Port forwarding On the main router (TWC - UBEE) I have tried to setup a port forwarding by informing the Local IP as 192.168.0.6 (E3000 IP), Internal Port 0, Public Interface IP (0.0.0.0), Ext Start Port 9001, Ext End Port 9001, Protocol - Both, Enabled Yes. On the E3000 I did the same config (screen shot attached e3000.png).This is not working properly. I can't get into the camera.
Issue 2: Printer/ The printer is only accessible if I connect to the E3000 (because it is on the 192.168.1.x network)
Issue 3: How to configure all the devices on the same subnet? If I want everyone to be on the 192.168.0.x network, how to configure properly the E3000 and the Valet? I have tried to force them into the same network but it would not work properly. It would not get an IP from the UBEE router (main).
We currently have a company network set up with a PC acting as a shared resource containing shared folders for everyone to access (approx 30 users)The network is comprised of a business internet connection to a 5 port router which is then connected to a 5 port switch connecting to 4 computers and another switch which is connected to another 4 computers and again to another switch - this continues for approx 30 - 35 computers.We have 2 shipping databases connected to the first switch (2 of the for first computers mentioned) and about 15 of the 30 clients need to access these. Because there is this many people on the network we are running really slow and losing access to the databases/shared files on the network.We do not have the expertise or time/money to set up a true server/client network.We are moving to a bigger building and potentially hiring 10-20 more people.We are thinking about having a small (5port router) and branching it off to 2 24 port gigabit switches and the business folder and having one switch contain the 2 databases and all the users who need to access it and the other switch containing all the other users.
How I should be setting up visualization on my network. Will be using one HP Proliant ML350 G6 server with 2 processors and 24GB of RAM, will use Hyper-V for visualization.The setup I was going to go for is as follows:Physcial server: VM host, not on domain, not fulfilling any roles, just hosting the vms.VM1: AD DC, hosting network shares, DHCP, DNS. This will do the bulk of the work on the network so will allocate 12-14GB of RAM to this server.VM2: Dedicated SQL database server only. This will do far less work so will allocate around 6GB of RAM to this server.This setup will leave around 6GB of RAM to the physical server.My questions are as follows:
1. Not being extremely experienced with visualization, am I going about this all wrong?
2. I have used a very similar setup before but on an ML360 G7 server which has 4 NICs, allowing me to assign a physical connection to all 3 servers present. This server only has 2. Am I going to be able to do the above on this server? What happens when I need to update things on the host that requires a network/internet connection? Is there a practical solution to this? Is this server not really suited to visualization of this sort?
3. Would I be better off just putting the roles of VM1 on to the host directly and not even using a vm for that? Thereby only having VM2 (which would become VM1 if you know what I mean) as a virtual server for the dedicated sql database? The reason I designed the setup as above is because I often have to perform tasks on the sql database server during the day and it then needs a restart, which is fine for the small number of users that use that database, but I would not be able to put the sql databse on the main server as it would then disrupt the rest of the network during daytime restarts. Like wise, if the above VM1 roles were on the physcical server and not virtualised at all, in the event of that server needing a restart it would obviously disrupt my sql server.
4. If I were to actually go for a design as above with one physcial host and 2 vm's on that host, would the host actually need 6GB of RAM or would it get along fine with less considering it only has to boot up and then allow the other 2 hardware virtualised servers to take over? Or does it still require a large amount of RAM?
It is the size of a 3 story townhouse but it actually has 5 floors, they aren't straight up I guess. The walls and floors are concrete so signal seems to be an issue for wifi connectivity. Right now my configuration is as follows:
Fritzbox 7390 - DSL Modem/router/N and G wifi located on 3rd floor
WRT160N - WAP/wired router in basement connected to Fritz box via G wifi and wired to PC and printer as well as a LAN over Power line
LAN over power line - only connected to Xbox at the moment on3rd floor to stream media from PC
I also have an Apple tv 2g on the 5th floor connected via fritz N wifi so I can stream iTunes media to a tv. The connection to the apple tv worked for a few days but now it seems to fail all the time. I tried streaming media to the Xbox as well as a PS3 over wireless but it always times out, that I why I am trying the LAN over power. I also tried sing a E3000 as a WAP but couldn't seem to get DDWRT to cooperate so it isn't being used right now.
how I can get this house better connected so I can have a reliable network throughout the house without breaking the bank? I am currently stationed in Germany, but am originally from the US so if I were to buy anything it would need to have an English interface, I am already having enough problems with the fritz box since it is only on German.
I have a DSL line and a Cable line. Cable line is 30mb, DSL is only 6 mb.MY PC has 2 NICs:cable modem is connected to ethernet NIC, DSL is connected via wireless nic.So, my question is, when I have both NICs enabled, which one does windows use ?does it use both via load balancing ? When I do a speed test with BOTH NICs enabled: My speed is 15 mb. When I do a speed test with ONLY ethernet NIC (cable). my speed is: 30 mb.So, what gives ?
