I got 3 laptops in household, my daughters and sons connect fine wireless but when i want to connect my laptop finds talk talk my internet provider but it says local connection only, Find this a bit strange when the other two laptops are fine.
View 4 Replies
How do I connect to internet using Local Area connection? I only access internet via wireless connection. With Local Area connection, IPv4 and IPv6 do not have internet access[CODE]
View 8 Replies View RelatedMy internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place before the move EVERYTHING worked fine, On my xbox the display says:Network adapter - wired IP address - failed?i'm running windows xp sp 2?
View 1 Replies View RelatedI wasn't able to connect to my modem's Ethernet for a month, before that, i was able to use my Ethernet when connected to PC, but when i threw it away, i tried many time to connect to my modem' Ethernet but all the attempts were a failier.......Is it because of the cable that i must connect or is it the com or modem that is wrong?
View 1 Replies View RelatedI have several devices connected to a homehub at my home.These include smart phones, desktop computer xbox 360 and a laptop.All work fine except the laptop which until the other day (when I uninstalled Norton Security off it) has been unable to connect to the internet.The laptop has Windows Vista SP 2. I searched the forums already for any details of how to rectify this and have seen mentioned the commands netsh int ip reset reset.log (along with Ipv4 and ipv6) and netsh winsock reset catalog? went to add/remove programmes to get rid of Norton and have sinced tried to use the Norton removal tool which every time I copy it across to the laptop from my desktop when I try to run it it says it is corrupt.I was then referred to a uninstall tool called Revo which I used to remove any symantec or Norton it could find.I have also turned off windows firewall and Im still not finding a resolution.
ipconfig/all shows the following information
C:Windowssystem32>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Lizzie-Laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
My internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place so happened before the move EVERYTHING worked fine On my xbox the display says:Network adapter - wired IP address - failed Im sooo so confused with what to do now, anyone got any suggestions?
View 20 Replies View RelatedMy laptop (win7) can connect to wireless, but not Local Area Connection.This is the capture of my device manager, it reported that the driver of ip6 failure.but I do not think ip6 relates.I tried configuring a static IP address, reinstalling network driver, or disabling and enabling network cards.
View 11 Replies View RelatedMe and my girlfriend moved into our new flat in September and since then we've been sharing my laptop as her laptop refuses to connect to our Wi-Fi, we are with Virgin Media and I have had literally no connection problems whatsoever but hers gives us various errors like 'No Internet Access' 'Local Connection Only' and sometimes it will connect for about 4 minutes and then just disconnects again, the only Anti-Virus she has running is AVG. It has also happened with friends who have brought there laptops over.
View 8 Replies View RelatedMe and my family have a PC that runs on Windows Vista service pack one. We have it hooked up to the Internet (Verizon DSL). And knock on well it has a great connection and has never given us any problems.We run a LAN line on this connection. No wireless at all. Yes we are still in the stone age. Well the other day my mother gave my step daughter her laptop ( Dell Latitude D610, it has Windows XP service pack two on it). They had it set up for wireless. So, I disabled that connection and went to the LAN connection that was set up and enabled it. Everything was set to obtain a address. I hooked up a Ethernet cable that went from the DSL straight to the laptop. No connection at all, not even a local one.So then I read the other day that you could type in the IP, Subnet and Gateway address from the working PC into the laptop and things should work. Well, I did this. Yes, I did get a local connection but still nothing on the Internet side. Then I thought, hmm maybe it needs to be done threw a router. I had a NETGEAR (Fast Ethernet Switch) FS 108 so I hooked everything up to that.
My PC connection works great. Very fast. However the laptop still, no luck. I left the IP, Subnet and Gateway address the same on the laptop. At first I got a error message saying that there was two machines on the same network using the same IP address(or something to that effect). So, I went back to the lap top and clicked to obtain a address. And got no connection at all. No local or internet. On the laptop I have released and renewed using the various Ipconfig commands. I have pinged the new address and it was a success. That address is 169.254.181.107. I Pinged the Subnet and it too cam back a success. I tried pinging a web page and no luck at all. I also have power cycled everything. And still the same result. Oh and when I did the Ipconfig /renew to get the address above it never did give me a default gateway. It came up blank.The laptop did have Norton Internet protection on it so disabled it. Or at lest I think I did. I right clicked on it and disabled it. So, I think I did it right. I also disabled the windows firewall and still no luck.The PC connections work great and it's hooked up threw the router as well. Just having trouble with the laptop.I would run the Ipconfig /all cmd on the laptop, but as I said I cant hook it up to the computer nor do I have any recordable CD's or a usb drive.
I have used a few hours today for a friend of us who is here visiting hoping that I will be able to fix her HP laptop.Checked the cmd -> ipconfig and noticed that the default gateway is blank, and it says no connection for the various connections below it.I have tried resetting the WINSOCK entries to installation defaults: netsh winsock reset catalog.Network card: Atheros AR5009. But even when I use ethernet cable it still does not work.I try the various repar and diagnosis but it is still not working.
View 9 Replies View Relatedproblem is that my internet traffic slows down to a stop after 5 minutes or so of activity. It is not a complete stop, sometimes I may get a tiny burst of traffic after 2 minutes or more of inactivity. I am connected via an ADSL wireless routerOther computers on the (windows workgroup) network do NOT have this problem. I am able to communicate normally with other local network computers. I am using Windows XP SP3, there are also Windows 7 computers on the local network[CODE]
View 4 Replies View RelatedI have to connect through VPN for work so that I can RDP into my remote development machine, but their internet speed is painfully slow. Is there any way I can route my general internet browsing traffic through my local connection, while still maintaining the VPN connection to my remote box?
View 1 Replies View RelatedWe've had no problems with our Internet before but yesterday I could only get local access connection. Neither my iPhone, laptop or home computer cud get any further than local connection on wireless.I'v tried the classic turnin it off and on (the router) and I'v tried connection with a cable but still gettin the same connection level! The router is a netgear if that means anything!
View 1 Replies View Relatedi cant get onto internet on my desktop, i checked all the settings i know of, i ran FSS, MiniToolbox and HijackThis
View 8 Replies View RelatedI am now using my dell optiplex 755, with windows xp sp3. The first set up was with wireless ,which works fine, but now I am trying to use the ethernet to netgear switch, to comcast modem, from dell desktop, I get error that says,TCP/IP is not enabled for thisconnection.Can not proceed. I have also tried to repair local connection with the Icon at the bottom, it has error that says ,local area connection.This connection has limited or no connectivity.do I need a new IP address for the this connection? I have tried to run ethernet from modem to computer ( to by pass the switch
View 5 Replies View RelatedI usually acess internet on Wi-Fi, and now I have travelled, and got my laptop with me. The internet here is Local Are Connection, the one with the cable, and it says I am connected, 100 Mbps, but no internet access! I can't browse or open anything that has to do with the internet... However, It works perfectly fine on EVERY other laptop. I've searched a lot of places and I've been told to write commands like ipconfig/ all andd netsh int ip reset.log but when I do that I get "The following command was not found : int ip reset.log" I set the properties in TCP/IP to Automatically detect settings .. but nothing.
View 14 Replies View RelatedHow I can stop a local internet connection from using my computer, or the router? I am using high speed through frontier. I have deleted this local internet connection once before. When they or it connects to my stuff, I cannot get online. It says, Unnamed Network - Unsecured Network.Radio type 802.11g with excellent strength.
View 1 Replies View RelatedI have a Compaq Presario Windows Vista. I currently have a Wireless router. It used to be Netgear. About 2 wks or so, my company changed it and gave me the password. I am currently connected to the one they changed to but local access only and no internet. Under Network and Sharing Center, it says: Unidentified network (Public network) Access: Local only Connection: Wireless Network Connection (perfectv) Under Internet Options, Connections , it shows the following connection: T-Mobile US Standard Modem When I try using the Windows Network Diagnostics, it keeps coming back with the options that havent worked. The options are: - Plug a cable into the network adapter Local Area Connection - Automatically get new IP settings for the network adapter Wireless Network Connection - A problem with your network router or broadband modem might be preventing an Internet connection Note: I am always able to connect to the internet wherever free wi-fi is available. If a password is required all I need is to obtain it and enter it without making any changes in the system. This is the only time Ive had issues getting online, even though I have the password.
View 5 Replies View RelatedMy pc in the LAN can ping the local server but cannot connect ( cannot browse) it.Others in the LAN can connect it. I can also connect Internet but , not the local server. (when I type \192.168.... on my computer browser , answer " window cannot access \192.168.........)
View 11 Replies View Relatedso I have an Acer laptop, and it won't connect to the internet. Whenever I try it says Local Only and won't let me access anything on the web. This happened a few months ago, and I had recently switched to a new router. I know this question has been asked before, but I've tried all the non-specific solutions, and non of them worked.
Also it won't even connect when I use a non-wireless, ie cable, connection.
I can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1.
View 1 Replies View RelatedI have been having some issues with Windows Audio needing to be restarted every time I log on. Also my theme has changed unexpectedly. I also noticed that Wndows firewall isn't started and it won't let me start it it gives me this...Could not start the Windows Firewall/Internet Connection Sharing (ICX) on local computer. Error 3 access is denied.
View 3 Replies View RelatedI have some issue with internet connection and Router WRT54G. There is always "Local Connection" but no internet access. I checked that at two different laptops. One with Windows Vista and the other one with Windows XP. Both the same problem. There is a wireless connection with excellent signal strength but no internet access. I added a screen shut to see the Router setting. If more needed I will add more.
View 6 Replies View RelatedThe wireless network never picks up any signals and when I try to plug in to the modem it doesn't recognize the internet either. Is this a driver issue or what?
View 1 Replies View RelatedI build a local DNS for namming my local network on windows server 2008 , but due to setup local DNS ,when I want to connect to internet from my pc , I can't do it . because my DNS set with a local IP such as 192.168.1.10. What can I do that have an Internal DNS and can use internet with that too.
View 1 Replies View RelatedI have a very annoying problem with my Linksys WRT54G2.When I connect a wireless device (laptop, phone, TV, Ipad) to my wireless network I only see a Local connection, no connection to internet. After resetting the router (power off for several seconds) the internet-connection is available again.I have to do this every 1 - 2 days.
View 7 Replies View Relatedroku player will not connect through verizon router, message
View 1 Replies View RelatedI can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1
View 5 Replies View RelatedI can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1.
More info:
ip config /all
netstat -n
ping&tracert 192.168.1.1
I am on Windows Vista, attempting to share my laptop's internet connection (via 3G Huawei Dongle) with my iphone 4GS (via the laptop's wireless card). The iphone detects and connects to the laptop's ad-hoc connection fine, but when attempting to go online with safari, an alert message says that safari is not connected to the internet. From the Network and Sharing center, the ad-hoc connection's access is "local only". I have already enabled ICS on the dongled connection, so this shouldn't be the case.
View 6 Replies View RelatedI have a Dell desktop with Windows XP Home Edition. I recently restored the computer to factory settings and when I tried connecting to the internet the Local Area Connection wasn't showing in My Network Places. I have been searching through other forums and tried the things that they suggested but nothing worked. I am trying to connect to an AT&T U-verse 2Wire router through a wired connection. I tried connecting both wirelessly and wired to another computer and everything worked fine. I checked the Device Manager and there is an ! mark next to the Ethernet Controller. The properties say that the drivers for that device aren't installed. And of course I can't install them since I can't access the internet. Other forums suggested that I check the network adapters option in Device Manager but that isn't available in the device manager.
View 3 Replies View RelatedI have a computer that when I try to connect to internet using the linksys wireless adapter it says local only connection. It has windows vista OS. What can I do to get it to work?
View 2 Replies View RelatedHave an Inspiron 1150 laptop & have excellent wireless connection. Can receive email but IE will not connect. It connected fine in the past but I upgraded files and now it will not. I went to IE 8 but managed to remove it back to IE 6 but still no connection.
View 1 Replies View Related
