Cat5e / 6 Can Use The Same Network
Jul 4, 2011I have the existing network all cat5e cables. can I add one more node using cat6 cable.
View 1 Replies
ADVERTISEMENT
How To Run Telephone Line And Network In 1 Cat5e
Jan 25, 2012Can i run a telephone line (UK BT) and a network connection in 1 x cat5e, this is to work a uk sky tv/internet box which requires a telephone line and an internet connection for its on demand side?
View 5 Replies View RelatedBelkin Cat5e Network Cable Won't Work
Jan 12, 2013I just purchased a Belkin prepmium CAT5e networking cable and plugged it into an internet wall jack and hooked it up to my ps3 and the connection won't work. Does it have to be hooked up to a router? Is a CAT5e cable the same as ethernet? or will I need to buy a different cable?
View 3 Replies View RelatedConnect CAT5e Cable From Laptop Connected To Wireless Network To Desktop
Feb 6, 2013Can I connect a cat5e cable from my laptop connected to my wireless network to my desktop and receive internet on the desktop?
View 17 Replies View RelatedCat5e How To Identify All Runs
Jun 28, 2011I have purchased a new home where cat5e was run from several locations throughout the house to the basement. Unfortunately, the runs were not marked. I know you can short one end of each cable and measure (voltage resistance?) at the other end in the basement to identify it. I need the process and equipment required so I can wire my home. The cables are not terminated.
View 11 Replies View RelatedCan Use CAT5e Wall Sockets
Dec 27, 2010I'm wiring the house with CAT6 solid cable. Can I use CAT5e wall sockets?
Are there actually any differences between CAT5e rated sockets and CAT6 rated sockets, aside from the latter being vastly overpriced?
How To Set Up Router / Have A Jack In Wall Says Cat5e
Dec 14, 2011SO I am not a computer wiz... but I have this outlet in my upstairs wall which has a phone and Cat5e Jack. I would like to set up my wireless router up there but where does the modem go? there is no jack for the cable.
View 1 Replies View RelatedConnect A CAT5E Printer To A USB Port?
Mar 18, 2013I have an interesting and frustrating problem...Is there any way to connect a POS printer with a CAT5E input to the USB port on a computer?
View 7 Replies View RelatedNew Home With Cat5e Only Wired For Phone
Mar 12, 2011I have CAT5e running through out the house. They all start at a 4x10 telecom punchdown module and end with non standard jacks. When I unscrewed a few wallplates, only the orange, white orange, blue, white blue are connected. The greens and browns are snipped off. I don't much care if I have a telephone or not (my cell phone is my only phone), I'm thinking of pulling all the cat5e off the module and attaching RJ45 plugs on them. Seeing that only the wires I mentioned above are connected at the wallplates, do I need to terminate all the wires on the RJ45 plug or only those four?I'm not planning on going up to a 1gb connection right now because I only have 20mb service anyways. Also, will I still received data only using those four wires?
View 9 Replies View RelatedCat5e Detects Phone But Not Ethernet?
Oct 19, 2011I have a house with a Leviton Enhanced Infraestructure Platform that distributes cat5e wiring to multiple outlets throughout the house. The problem is: Some cables will not transmit the Ethernet (internet) signal, but when I connect a phone line to it, it works. So the cable integrity is fine, but somehow connecting the internet router to it will not make it work.
View 2 Replies View RelatedCan Cat5e Be Connected To Cat6e In Series
May 29, 2012The Ethernet Cable in the Control Panels are Cat 5 or 5E. where as The ethernet cable from the PLC to the Control cabinet is Cat 6/6E. Is it Ok to patch to connect them in series?
View 1 Replies View RelatedBroadband :: Difference Between RJ11 And Cat5e RJ45?
Apr 25, 2011I want to connect 2 desktop computers by wire to my broadband. The inlet is 20 metres downstairs. Should i use RJ11 to reach the Router upstairs, then connect with 5 metres RJ45, OR run two RJ45 cables 25 metres with Router near socket downstairs.? Would there be any degredation in either cable.?
View 5 Replies View RelatedCat5e Or Cat6 Cable For Outdoors / Underground Use?
Jun 30, 2012Just about to run about 30 metres of Ethernet cable underground from one building to another. I know there's quite a few forums like this which suggest to go for cat5 mostly for the price, not sure when these were advised but cat6 doesn't seem to be too much more now...
So just wondering if it will be worth going for cat6 for a future reference if you will, ideally if products ever advance to support it. Just that I don't fancy digging up the cable in a year or so.
Of course I'd rather go for cat5e but wouldn't mind adding a bit to the budget if it's worth it?
Also does anyone know if it's any more difficult to fit the connecters to cat6e? Are they just the same as rj45?
Routers / Switches :: Difference Between Cat5e And Straight Cable?
Jun 17, 2011what is the difference between cat5e and straight cable?
View 3 Replies View RelatedCabling / Cards :: How To Connect CAT5e Cable To GE Wallplate
Dec 5, 2012I am trying to connect CAT5e riser cable to a GE #76536 network and phone wall plate.The problem I am having is the CAT5e cable has 4 twisted pairs of wires as follows: blue/white, green/white, orange/white and brown/white. The wall plate connection has 8 distinct colors; blue, white, green, orange, yellow, black, red and brown. (or at least that's what they look like to me)None of the white wires from the CAT5e cable have any striping. They are all solid white. I've found color charts for matching striped wires, but I am at a loss to figure out how to connect these white wires to the proper terminals
View 7 Replies View RelatedPut A Cat5e / 6 Cable Between Two Client PC's For A Temporary Boost In Speed?
Jun 26, 2011Currently have wireless router to internet with pc's all connected in home network. Is it possible to put a cat5e/6 cable between two client PC's for a temporary boost in speed for for accessing shared files between these two machines.(i.e. 1Gbit rather than 56Mbit.)Both PC's would still want individual connections to the router and internet, but how do you make sure accessing shared files goe's through the faster ethernet cable rather than the router?
View 1 Replies View RelatedCan Cat6 Ethernet Cable Be Used With Any Switch That Accepts Cat5e
Oct 28, 2011I have seen 5-port network switches (for home network use)for sale that list CAT5 and CAT5e as the cabling. My question is, can CAT6 cable be used with these switches without performance issues?
View 1 Replies View RelatedRouters / Switches :: 500 Ft Enhanced Cat5E Cable Ethernet Between Two Buildings?
Jan 27, 2013A 500 ft Ethernet run with a mid-point POE extender, what should I use on both ends for best results? Looking for a possible switch at the termination end. I'm using enhanced Cat5E cable.CGMAN
View 10 Replies View RelatedCabling / Cards :: Cat5e Cable Wrong Wire Color?
May 16, 2011I have Cordata 5e cable and noticed the wires inside are not the typical wire colors ie:green/ white. The colors of wires are all solid ie: green, yellow, tan, pink, etc...
View 1 Replies View RelatedRouters / Switches :: Cat5e Wiring Colour Codes On Patch Panel?
Jun 16, 2011my cat5 wiring seems to b wrong,so i need the wire combination of a cat5e cable on a patch panel
View 1 Replies View RelatedNetworking :: Software For Quickly Copying Large Amounts Of Data Over Cat5e
Oct 20, 2011I'm looking for some software for copying large amounts of data from a Mac OS X machine to a Windows 7 machine over a Cat5e cable with IPv4 connectivity?
Another way I could ask this question is what IPv4 protocol will have the lowest overhead so that I may copy large amounts of data the fastest?
Also, would that mean it's a low-level protocol, like transport layer?
Home Network :: Private Network Within A Larger Network?
Nov 14, 2011I have a relatively simple question. I would like to create a private network within a larger network, the private network having several clients. I would ideally like the router to appear as the only device on the larger network and all data to be sorted by the router to the clients in the private network.
Will the Netgear FVS318G be able to do that? It seems to have the necessary NAT options.
Access Internet Using Wireless Network And Printer Using Separate Wired Network At Time?
Apr 4, 2012I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies View RelatedWindows 7 Laptop With Atheros AR9285 Network Card Can't Connect To Wireless Network?
Aug 21, 2012This past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View RelatedSharing :: Change Network Settings So Internet Connection Appeared As Public Network
Jan 25, 2011I use my desktop for streaming media throughout the house. I found it was causing lag for gaming most likely because it was taking up all the bandwidth for the router. We had a 2nd router laying around as well as a 2nd wireless adapter so we set up a 2nd network that was not connected to the internet for strictly media streaming.I attempted to change the network settings so the internet connection appeared as a public network so that streaming of media was hopefully diverted to the non internet wireless adapter.I want a faster way of transferring large video files from my laptop to my desktop. I recently bought a crossover cable to do this through direct connection.Both use the same user name and password as well as run the same win 7 pro however the desktop is the 64 bit version. I set up both ipv4 with the same addresses.When it has worked I am only getting a connection speed of just over 10mb and once I connect the crossover cable between the computers it knocks out my internet connection on the wireless card.
View 5 Replies View RelatedD-link Dcs Network Camera :: Netgear Cgd24n - 942l Just Won't Connect To Wifi Network
Sep 2, 2012I seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
D-Link DCS Network Camera :: 2121 - When Plugged In Without Network Cable / Status Led Remains Red
Mar 26, 2011I connected my camera to my router with a network cable. It is a DCS-2121, H/W Ver A2, with firmware 1.04_FR.It received an IP address and I could access it fine with a web browser.Then I configured it to work wireless.I disconnected the cable but the camera wasn't accessible.Since I couldn't find it I re-attached it with a network cable, but this didn't work.So I pressed the Reset button to start over again.However, now I cannot get it to work anymore. When I plug in the camera and have it connected with a network cable to the router the status light remains RED.When I plug it in without a network cable the status led remains RED.When I connect it with a network cable to a computer directly, the status led remains RED.I've tried changing the network settings of my router to use 192.168.0.x as range, but it makes no difference. In all cases the status indicator remains RED.
View 2 Replies View RelatedHome Network :: Use Laptop As Network Tap Between (DSL) Modem And Wrt54gs By Creating A Bridge?
Jan 8, 2013I'm experimenting/attempting to use a laptop as a network tap between my (DSL) modem and a wrt54gs by creating a bridge with two NICs in the laptop. My problem is I can't seem to get connectivity on the user end of the router. I can't ping the bridge from an end computer...
DHCP is disabled in the router, but even when manually configuring the IP address on an end computer and using the bridge as a default gateway I can't ping out.
Am I completely misunderstanding the purpose of a NIC bridge?
Home Network :: Setup A DC++ HUB For Sharing Data Within The University Local Network?
Feb 13, 2011I want to setup a DC++ HUB for sharing data within the university local network. We have addresses of the form 172.31.*.*. These addressed are accessible within the university bu non routable outside on the internet. My plan is to setup a local HUB for DC++ for sharing data within the university intranet. So even if internet is unavailable data can be exchanged through LAN. This HUB must not be accessable outsied the university network.how should I do this all..implementing network sharing other than DC++. My basic idea is that everybody can share their data and the data is searchable from one common interface( Web interface is better option, if possible). And data featching should prefferably be from many hosts, using multiple connections so that speed can be improved..
View 4 Replies View RelatedHome Network :: Linksys WRT54G With DDWRT Firmware / Network Goes Down Randomly
Aug 16, 2011I have a crappy router/modem from comcast with two windows machines and a linux web server connected. I also have another router, a Linksys WRT54G with DDWRT firmware with WAN connected to the modem/router. The linux web server has a static IP, configured with /etc/network/interfaces The network goes down randomly. Disconnecting and rebooting the linux web server usually fixes it. It's possible that the WRT54G could be at fault as well.The problem is that I just don't have any information on what is happening on the network. (Well even if I had the information, I'm not sure I would know what to do with it) I installed wireshark, I figure I should just leave it running until the network goes down, then I can go through the packets and see if I see anything weird?
View 4 Replies View RelatedCabling / Cards :: Unidentified Network - Cannot Access Internet With New Network Adapter
Oct 8, 2012i can search for networks. As you can tell i am currently on the internet on my laptop. I can search for the current network i am on through my adapter. I then connect to it. It says im connected to a unidentified network. It will not let me search the internet or anything else.
View 9 Replies View RelatedHome Network :: Add Printers To Local Wireless Network Without Sharing From Computer
Mar 3, 2012I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies View RelatedCisco :: PIX 525 Firewall / Voice Network Not Working After Data Network Migrated
Feb 28, 2012My company have a Cisco PIX 525 firewall which is cater for NOC internal data network and also voice network, the subnet for data network is 192.168.2.0/24 and the subnet for voice network is 172.16.2.0/24. someday this NOC firewall was faulty. I was migrated the data network from this NOC firewall to the other temporary firewall just at the moment. And the voice network i migrated it from where it orginal at NOC firewall to a VOIP system which actually having a connection with my temporary firewall(This temporary FW only to take the traffic of data network). After the migration of data network from old firewall to temporary firewall and also the migration of voice network from old firewall to PABX system. The subnet for data network remain the same as 192.168.2.0/24, but the subnet of voice network i edit from 172.16.2.0/24 to 192.168. 3.0/24.Now when i want to use one Cisco router 2600 to replace this temporary firewall then facing problem at the voice network....The data network after migrated from temporary firewall to new 2600 is ok, users can browsing. But when i trying to at the same time when the data network been migrated , it will affect the voice network which still located at PABX. ..user cannot make call...I was thinking reason because this voice network which currently in 192.168.3.0/24 is tight to somewhere on the 192.168.x.x at the old firewall internetwork. So, when i migrated the data network over to new router, it will also cause the failure of voice even thought after i migrated the voice system to new router.So when i do the disaster recovery back to the temporary firewall for both data and voice. The voice is resuming to normal.
View 4 Replies View Related
