Cisco :: LMS 3.1 / Cannot Connect To ANIServer 6.0-LMS
Sep 22, 2009
I am running LMS 3.1 and have encountered the following issue when trying to access the topology map for the first time:
Cannot Connect to ANI server ANIServer 6.0-LMS
I tried restarting the ANI process on the server and even rebooted the whole server gracefully. I still get the same error. I initially had a Java problem but once I loaded the provided plug in, I got past that problem. This is a new install and has only been running for a few days now.
View 8 Replies
ADVERTISEMENT
Sep 6, 2011
LMS 4.0
when we tried to use topology services, we receive the following message:
"can not connect to aniserver."
View 2 Replies
View Related
Jan 30, 2012
we are running LMS 3.2 where i am unable to see the typology Diagram because my ANI server is down .
View 4 Replies
View Related
Sep 25, 2011
I have installed Ciscoworks LMS 3.2 0n windows server 2003 enterprise edition. I have issue with Campus Manager while accessing any thing in Campus Manager it is giving following error.
"Error in loading properties from the server" "Can not contact to ANI server" Status of ANIServer process is Failed to run
I tried to reinitialize Campus Manager Database still it is showing same issue.
Installed Campus manager version 5.2.1 check attached file for ANI log
View 5 Replies
View Related
Oct 26, 2011
I recently made a fresh install of LMS 4.1 and added all of our devices (about 400 devices). After configuring all jobs and services everything ran fine.After a few days a guy from the server team called me and told me that the CPU-usage increased over the days. I made some investigations and found out which process is using CPU ressources. Whenever ANIServer is running and collecting data CPU is running at approx. 100%. First it takes only a few minutes to complete but after some cycles ist takes more and more time to complete, after a week it takes more than 4 hours. After restarting ANIServer process it takes again a few minutes and then the duration increases.
Server specs:
Windows Server 2008 R2 64-bit
VMWare ESX
4 CPUs @ 2.93 GHz
6 GB RAM
View 12 Replies
View Related
Sep 18, 2011
I have issue with the ANI Server process, which fails to start. The LMS version is 3.2. It's recently installed, with just one device added to the database so far. I've read some similar cases in the forum, but I'm starting a new thread since it could be a different issue which causes the problem.Please, find attached ani.log, ANIServer.log, the output of the pdshow command and ANIServer.properties files. I doubt that the last one might be corrupted for some reason.
View 4 Replies
View Related
Mar 25, 2013
I have a fresh installation of LMS 4.0 on windows server 2003, when i click to open topology i get error message : ANIServer service may be down or Host name isn't DNS resolvable
i tried pdshow -brief ANIServer ===> service UP
DNS is working using host file in driversetc i restarted the server
restared the crmdmgtd
unistall / install java plugin
pdterm ANIServer
pdexec ANIServer
NO change ..
View 6 Replies
View Related
Jul 29, 2012
Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies
View Related
Feb 24, 2013
I have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
I've tried changing the Ethernet cables
View 1 Replies
View Related
Feb 25, 2011
I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
View 7 Replies
View Related
Aug 9, 2011
I got a problem when I use WLC 5508 connect to LDAP for authentication, but no luck there, it's a simple config, but not easy to work on my job, I got the following messgae. [code]
View 9 Replies
View Related
Apr 12, 2011
I am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
View 1 Replies
View Related
Jun 8, 2011
Few days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.
View 3 Replies
View Related
Mar 1, 2013
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
View 12 Replies
View Related
Jan 7, 2013
when i connect my sylvania netbook to my wireless internet it says connected, excellent signal but when i try to pull up a web page it says can not connect to server...
View 1 Replies
View Related
Jun 16, 2011
I'm trying to connect to my home laptop from work. The home laptop is connected to DIR-655 router. I set up the internal and external ports to 3389 using both TCP and UDP protocols with the Application as "Remote Desktop". From my work PC I enter the external IP with :3389 and it fails to connect. I have also tried accessing internally which is failing too. All computers are running Windows 7 Home Premium Remote Access is enable on all.
View 1 Replies
View Related
Nov 19, 2011
Recently I installed connectify because my uni flat only had one wired outlet, and I wanted to use my xbox at the same time. It worked perfectly, but when I returned home I found my laptop could no longer connect to the home network, it just says it cannot connect, but all the over devices in the house work. My laptop can still connect to the internet via an ethernet cable but this isnt practical at home. I've uninstalled the connectify program, and tried my best to make sure I got rid of all the stuff it's done, but still my problem persists
View 5 Replies
View Related
Feb 13, 2013
I'm connected to a wifi at home on my cellphone, says signal status is excellent, 54mbps, wpa psk security but I cannot connect to the network. My desktop pc is connected via ethernet and it is working. I tried connecting to a neighbor's wifi and it worked on the same cellphone. WLAN light is flashing, the rest are solid. I have a prolink adsl router.
View 1 Replies
View Related
Aug 13, 2012
Any way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies
View Related
Mar 12, 2012
I have just built a PC desktop and do not think it has the wireless built-in on the motherboard. I'd like to connect to the local network wirelessly. I know that the easiest answer to this is to get a wireless PCI card. But can I ask that in order to be able to access to the LAN wirelessly, I could plug my PC directly into the wireless access point TP-Link.
View 1 Replies
View Related
Feb 9, 2011
For some reason, I can see the wireless connections on my laptop but not on my Dell Computer. When ever I try to connect on my computer i see no wireless connections at all, i have A wireless USB adapter that use to be on put in the back and recieved wireless connections in the past but now it doesnt, I try the front ports, and nothing works except for one, but that one port doesnt work for some reason, the same thing happens, no connection at all.
View 6 Replies
View Related
Jan 1, 2012
I have just moved in to a basement apartment and can connect to the internet with my wireless but not with the ethernet cord ran downstairs for me. The other computers upstairs work fine on ethernet through the same router. I do not understand what the problem could be. here are my configs:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
Windows IP Configuration
[Code].....
View 2 Replies
View Related
Mar 30, 2013
At first I can connect to Internet for 1 min and fails afterwards even if I reconnect to the router. Then I turn on the Access Control settings on my (NETGEAR) router and put my laptop into the trusted wireless stations list, now it can connect to Internet for 1 min and fails however it works for another 1 min if i reconnect to the router. So now I need to reconnect to the router every minute or so.I can connect to the Internet via Ethernet cables, so I am quite sure it's the wireless problem on my router but not the service provider's fault.
View 1 Replies
View Related
Feb 20, 2011
I can't seem to connect my laptop using my ethernet cable, but I'm able to connect it to the Internet using my wireless connection. Whenever I plug in the cable, my computer tells me that the LAN connection is connected, but I can't open a web page. I tried connecting the cable onto another laptop and it worked, so I don't know what's up with the LAN connection on mine.
Command Prompt Message after ipconfig /all:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
[code].....
View 11 Replies
View Related
Sep 19, 2011
I have a new broadband connection and I was kinda facing problems connecting wirelessly with my router.So I did go to my router page and then cloned my MAC book's mac id, and it worked fine. I'm able to connect to the internet wirelessly. However, I can't connect to internet from an Windows XP lappy. I have removed, re-added the network, the network is very much identified but the laptop doesn't wanna connect to the internet wirelessly.Both the laptops MAC Book pro and Dell(the one which has XP loaded) were able to connect without any problem in the previous ISP's case but XP doesn't wanna connect to with the new ISP.
View 3 Replies
View Related
Jan 4, 2011
I've been working on setting up a VPN on my home network's Cisco 871 (12.4(24)T4). I've gotten to the point where I can connect from a remote Linux server using VPNC, however, when I try to connect from an iPad or Cisco VPN client, it doesn't seem to be making it past phase 2 -- not even prompting for the username and password.
View 2 Replies
View Related
Feb 28, 2012
The current scenario is as follows:
ASA 5505 Site A connects to ASA 5505 Site B S2S VPN, both has static IP address.
Now I need to change from ISP so that I can get more internet bandwidth, but the new ISP only has dynamic IP address.
Now I need to change Site B's config to use dynamic IP and still connect to Site A and establish a S2S VPN.
How can I do this?I want the ASA 5505 to change its IP daily so that the VPN connection is still up even if the ISP at site B changes its IP. Or a way to do this automatically as I don't have anybody at site B that can do this manually for me.
View 8 Replies
View Related
Nov 15, 2011
I have a cisco 870 router, if i have a internet connection can I use this to connect one pc to the net without using a modem?
View 3 Replies
View Related
Jun 11, 2011
I have 2 network in 2 bulding. I want all the PCs in two bulding 1,2 can connect to websever throught out http:[url].....
I have already configured PVN on two router B1_R1and B1_R2, but it is not successful in each of building, I have 3 deparments such as marketing,fiance, and Human Resources. I configures successfully PCs in each departments can be seperated each other, using access-list and switch 3560 layer 3 but I have a problem with network at B1_R2, they cannot connect to websever although I configure VPN.I simulated in packetracer newest version 5.3.1
code in multilayer sw0
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption[code].......
View 1 Replies
View Related
Oct 23, 2011
So I've got a IPv6 tunnel with Hurricane Electric and it's currently physically segmented off of my home network. A 1841 terminates the tunnel and if I want to use it I need to plug into a port thats on a VLAN with no SVI and connect outbound to test IPv6 stuff. I'd like to give access to some other users and Im wondering if 6 over 4 tunneling with AnyConnect will work for that. My thought was that they could terminate on my main firewall (5505) and then terminate their VPN session in another vlan which was connected to the IPv6 router. I have this config working right now with IPv4 and I can browse out but Im struggling with the IPv6 support piece. The admin guides from Cisco seem to indicate that I'll need to configure IPv6 addressing on the ASA which makes sense, but doesnt fit my current design.
View 2 Replies
View Related
Mar 16, 2012
I am not able to remote access my work computer from my new Samsung Laptop. I was finally able to install the VPN software, but the remote access does not work on my new machine; however, it works on my old HP machine.
View 3 Replies
View Related
Jan 6, 2012
I'va upgraded my Web View server from java 1.5 version to 1.6. After upgrading i'm unable to connect to other server through SSL.
View 2 Replies
View Related
Sep 17, 2011
I have just wired my house and have a cisco 2950 switch running in the basement. every rj45 jack in the house works with everything except one computer. we have a HP with an nforce 4 chipset. this computer was connected through a hub and to a netgear router using the wires in the walls, the same wires and ends this switch is connected trough now. This computer stoped detecting a connection when we moved it off the hub and to the switch. all the ends and punch downs are using B wiring pinout. I have tried a new cable, when i plug any cable from the wall jack to this laptop it works, when i move the same cable to the HP it does not detect any cable plugged into it. when i setup ICS on this laptop it will connect and does detect the connection with the same cable running from the wall jack to the HP that it previously did not detect.perhaps the HP wants to use the 2 pairs that are other wise dormant? im about to install a new nic and see what that does but i can not understand why the Nforce nic would not connect to a cisco switch
View 3 Replies
View Related
