Cisco :: LMS 3.2 - Reboot Requires Manual Start Of TomcatMon And Apache
Feb 24, 2012
I have taken over a couple of LMS 3.2.0 standalone servers (two different networks). When I reboot them they tend to be slow coming back up (20-30 min). I"m thinking this may be due to the fact that LMS was reinstalled on both of them as I see an old CSCOpx folder (CSCOpx_old) as well as the current one. I assume that someone reinstalled and the registry may be dirty and service dependencies may be jacked up but honestly I don't know how this works for LMS and I haven't found much good info in the user guide for common services for service dependencies or registry keys in general.
Also, one of the servers never comes up fully on reboot or restart of the daemon manager. I troubleshot this and found that Tomcatmonitor and Apache are always down after reboot/restart. Tomcatmonitor says that it was shutdown by the administor in a pdshow and Apache says that it was never started. I have to go into the server and manually start these processes with a pdexec to get the application up.
View 1 Replies
ADVERTISEMENT
Aug 3, 2009
Have 13 DCS-920 Every few days a few random cameras will will hang/become unresponsive at random intervals. The cameras require that I unplug the cameras before they will respond. When the cameras are unresponsive I cannot access the camera via a web browser, the D-View Cam software, or the setup wizard. This is a problem as they are all mounted in positions requiring a ladder to access.
I have some connected via 802.11g and other hard wired over 10/100 cat-6 Ethernet cable.
View 14 Replies
View Related
Nov 15, 2011
We have 3 sf-300 series switches in Layer3 mode deployed in different offices. We have found that approximately every 2-3 months at all 3 locations users experience a serious reduction in bandwidth. Only after rebooting the cisco does the problem go away and we're okay for another few months. some setting/feature that may be contributing to this? We are only using several ports and 1 static route on each switch. We are not using any of the bells and whistles on the switch. 2 of the switches are using the original firmware, whereas the other is using the newest firmware. Maybe this is just what we should expect from a Small Business switch?
View 18 Replies
View Related
Jul 15, 2012
I recently installed a Cisco X2000. Several PCs running Windows XP Pro connect wirelessly. Also, we have an Android device and iPhone connected to the wireless network. We have a network printer and network drive connected via wires to the router. Most of the time the router and cable modem features work well. However, every so often all devices lose wireless signal simultaneously. It is not possible to reconnect to the X2000 unless I unplug the X2000 and plug it back in. After this reboot, we can connect again. Obviously, this is quite frustrating. By the way, we get acceptable signal strength after the X2000 locks out however none of the devices (computers or phones) are able to connect.
View 1 Replies
View Related
Aug 30, 2012
We have LMS 4.1 - it was working perfectly for some time - it was rebooted and now the services don't start correctly. I manually started most of the services but the Daemon service will not start.
The main page comes up and after I log in - all the sections list an error
'License Server / Deamon Manager is down. Please check license.log for more information'.
View 3 Replies
View Related
Apr 8, 2012
I am attempting to setup an Apache Server 2.2 for Windows, everything is set up but the server will not start, I heard it may be caused by my virus protector using Port 80 but I cannot find the httpd.conf file for it in the directories they say it should be in, I even did a tree/f with CMD DOS?
View 5 Replies
View Related
Jun 26, 2012
i am trying to use teh ACE to replace an apache based load balancer in an jboss application cluster. I am using L7 loadbalancing to load balance between multiple components. the way these jboss application servers work with apache is that.When the jboss application starts up on the on application cluster, it issues a GET opencase/webservices/config-service?wsdl to the loadbalancer IP.The apache based LB in turn talks to the same box on port 8009 via ajp retrieves the configuration file and provides it back to the application on port 80.And after 2 has completed the Jboss application comes up. Basically to start the application the Apache loadbalacer will accept requests from the its target list and load balance the request back to them itself.Not sure how i can use the ACE to accomplish this. attached are my topology (logical) and the ace configuration. from my topology file -- the net-cms-1 will issue a get request to teh VIP (on the ace), the ACE accepts the connection but soon resets it.
View 1 Replies
View Related
Aug 26, 2011
I have installed lms 3.2 on server 2008 , and when I click on device update in software center I receive an error which I inserted down here ;I have to mention that I also have installed Common services patch .
View 8 Replies
View Related
Apr 10, 2013
i've created an application with NodeJS and I'd like to test the application on my LAN with my family. The application listens on port 1337 for connections and I can access the application fine through my own PC by typing localhost:1337, 192.168.0.3:1337 or even http://joel-pc:1337/ into my browser's address bar.
I will be also be running apache alongside NodeJS, and I can access this fine by typing 192.168.0.3 or http://joel-pc/ into a browser's address bar as long as it's connected to the same network.Now here's the weird part; If I stop the apache service, change my node application to listen on port 80 (http) insted of 1337, it will be accessible on my pc by typing localhost, 192.168.0.3 or even http://joel-pc into my browser's address bar. However, I still can't access NodeJS on any other PC on my network apart from my own.
I've tried creating an outbound rule within Windows 7 to allow access to port 1337, but I still can't get access to my NodeJS server on any other PC than my own, even if it's listening on port 80.
View 1 Replies
View Related
Aug 7, 2012
Differences between using an Apache server on a regular laptop vs. a whole operating system like Windows Server 2008. I'd like to setup an intranet complete with an internal domain name. Is this possible with Apache or do you have to use a complete server operating system like Windows server 2008?
View 1 Replies
View Related
Dec 9, 2012
I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it.I tried disabling the iptables firewall but I had no success.My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall.
Here are my network settings:
Ifconfig
eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b
inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]......
This gets an empty result array. This function however works well in the previous server where the script was hosted before. No modifications where made whatsoever
View 4 Replies
View Related
Dec 21, 2010
Essentially, I have a spare desktop computer I'd like to turn into a web server, but my modem and wireless router are very difficult to work with. I installed Apache HTTP and successfully hosted a test page which can be accessed anywhere on the LAN. However, I'm having trouble setting up the server to be accessed from my external IP address.
I was supplied with a ZyXEL EQ-660R DSL modem by my ISP (CenturyLink) and bought a Netgear WGT624v3 wireless router in which to connect my laptop and spare desktop.
ZyXEL's website is not useful, and I don't think much of the problem is with the Netgear router. I've played with many settings and have tried to forward port 80 from the modem, but I've had no luck.
View 1 Replies
View Related
Oct 21, 2012
After replacing a Cisco CSS/SSL Accelorator and PIX firewall with an ACE 4710 to do load balancing and SSL encryption behind an ASA firewall we started seeing mangled HTTP requests in the Apache access logs for the servers in the server farm. This is occurring for several different URLs and not just the one above and for multiple web browsers.The ACE load balances to servers running Tomcat 7 with Apache HTTP server v. 2.2.14. A recent ACE software upgrade to A5(2.1) has not fixed the problem.
View 1 Replies
View Related
Apr 6, 2012
I have a Cisco Valet wifi router that works fine with my laptop and my computer that has a usb wifi adapter. The problem is that for some reason when I try to connect my moms computer to the router it can only connect to the guest router and when I try to connect to the regular router it just fails even when I use the correct password. I have tried uninstalling the driver and re-installing it for the usb wifi adapter for my moms computer (NetGear N150 USB Adapter) and its nothing works. Her computer by the way is an Acer Windows XP SP3 machine.
View 4 Replies
View Related
Mar 21, 2011
I just got Charter cable internet and decided to purchase my own cable modem instead of paying 5 dollars a month to rent one. I got a D-Link DCM-201. I know it is a little old but it was brand new/unused so I figured it would work out well. Ever since we got it hooked up every few hours we lose internet connectivity. The power, cable, and status lights are solid green and the Ethernet light is blinking green. The only fix I have found for this is to power cycle the modem. The problem is this happens about once every 4 hours...having to reset the router every few hours is making having cable internet a much more painful experience than it should be.
View 7 Replies
View Related
Oct 29, 2011
I just bought a Westell modem 6100 model online, and when I try to change the profile, I get a message saying: The server 192.168.1.1:80 requires a username and password. The server says: Modem Secure."
View 12 Replies
View Related
Jul 21, 2012
I'm currently trying to setup a Linksys SRW2048 switch.
The switch came with version 1.0.0 of the firmware (circa 2005), which worked fine with Google Chrome and Safari on OSX.
However, I recently upgraded to 1.2.2 (circa 2009), and the in-built web configuration page doesn't seem to work in anything except for IE6 or IE7.
Chrome and Safari give me a whole bunch of resource not available errors, and the page itself doesn't render properly at all:
Firefox also doesn't render it properly either:
It seems a bit strange on Linksys/Cisco's part that they'd release an updated firmware that meant their switch could only be used by Internet Explorer.
Or failing that, are there any known workarounds to get this to work with Chrome, Safari, Firefox - anything other than IE? Or anything on OSX or Linux?
Also, I heard that firmware 1.2.1 still works on non-IE browsers - any archives of older Linksys switch firmwares?
View 2 Replies
View Related
Jun 7, 2013
Have an SRP527W that I've had a couple of years,
Model:SRP527W, ADSL2+ AnnexA, 802.11n ETSI, 2FXS/1FXOVersion ID:V03Hardware Version:4.0.0Boot Version:1.1.17 (Jan 4 2010 - 21:15:46)Firmware Version:1.01.29 (002) Mar 29 2013ADSL Firmware Version:0.78.0Recovery Firmware:1.01.20 (011)Setup Wizard Version:20110728.00
As indicated in the subject, wireless users are finding that it is either unattachable (shows up in the list but fails to attach) or if you manage to authenticate and get in, it's painfully slow or simply drops out. Security is WPA-PSK. Only noticed the issue after a couple of Windows 8 laptops came into the household, but the problem still seems to be there when they are off so not sure if they are connected in some way or not. Updated to the latest firmware - no change. Wired connections are fine and when it's initially restarted, so is the wireless, seems to happen sometime after wireless services are restarted. Only the one Wireless SSID, nothing fancy, max users around 5, all on laptops or the odd pad. I changed channels done narrow wide etc, (using mixed mode - some Wireless N laptops some Wireless B/G. Nothing seems to make any difference. No log entries until the Wireless system is restarted, doesn't require a reboot of the router, just a SUBMIT of the existing wireless settings to force it to restart.
View 8 Replies
View Related
Jul 1, 2012
I use a cisco asa 5520 to terminate multiple site to site VPNs. Due to the configuration of a parteners network, i have had to install 2 routers into this parteners network, i have been supplied static private IP addresses for each router each router has a unidue LAN subnet which is the VPN's protected network.The partener use's PAT with only one public facing IP address.The VPNs are initiated from the parteners network using an IP sla ping.
Upon installing my first VPN router in the partenrs network, once NAT-T was enabled on the local ASA the VPN started working fine. After installing the second VPN router i tried installing the new config on to the ASA but via CSM, the ASA complains that it can not have 2 VPN's with the same peer address configured.
View 3 Replies
View Related
May 7, 2011
I am fairly new to the Cisco world and aim to take my CCNA in the coming months.I am now working with a customer who has several Cisco 857 (UK PPPOA ADSL over POTS)The have sonicwall firewall VPN devices that needs to have one block of 8 static ip addreses from the ISP at each site.The current configurations use the network address on the VLAN interface use Static NAT to a private IP address to connect to port 23 on the VLAN interface. Why would you set up the router this way?,I thought that from a block of 8 IPs the first would be the network address the last the broadcas address, one for the router (on the VLAN interface) leaves 5 usable for the hosts attached to the ethernet ports on the VLAN.
View 2 Replies
View Related
Mar 6, 2011
I understand ip addressing and what a subnet is.But why is it sometimes I connect two things together,it always requires a subnet mask, and other times no? For example when I try to connect two computers together, it requires both IP and subnet mask.But if I use FTP software all it ask for is IP.Same thing when connecting to a website through their ip, doesn't require subnet.
View 6 Replies
View Related
Sep 29, 2011
I've been having this issue where my wireless network completely disappears from my computer and it requires a restart to fix.I know for a fact that it is not my modem/ISP as my iPad still connects just fine to the network.My network disappears about after 10-20 minutes of being logged on.
View 1 Replies
View Related
Apr 14, 2011
Shareport recognizes the printer only after resetting the DIR-825 router. I don't know if this is a Shareport issue or an issue with the DIR-825 disabling the USB port.This happens after there is no PC connected to the router for a number of hours such as overnight. I have 1 laptop and 1 desktop running Win 7 64-bit and 1 laptop running Win 7 32-bit. The desktop is connected directly to the router and the laptops connect via wifi. All PCs work perfectly when the DIR-825 is reset.This isn't a big issue but it's extremely annoying and shouldn't happen. I use a Cisco WAG320 in my office that has similar USB functionality and this never happens.
D-Link Router: DIR-825
FW Version: 1.13NA
Operating System: Win 7 32 and 64 bit
SharePort Version: 3.1.0 R1 (SXUPTP Driver : 3.4.6.0)
View 2 Replies
View Related
Feb 22, 2010
DIR-655(A3) 1.33NAb02_HNAP_beta I used to be able to send notifications on log full etc... When my ISP was still allowing outbound email w/opt out of block on port 25. This worked on my old DI-524, and used to work on my DIR-655.In an effort to clamp down on spam my ISP formerly SBC now AT&T began requiring SSL. Secure Authentication is not required. With the ever increasing concern for controlling spam DLink really needs to get in gear and provide the support customers need and back the efforts of ISP's to control spam. Otherwise it's wasted code occupying space. On that note if space is a concern, need space for the code ~ throw SecureSpot out !
[URL]
On the Outgoing Server (SMTP) Settings window click Edit and verify:
# Server Name - displays smtp.att.yahoo.com.
# Port - displays 465.
Note: When updating the secure server settings, check SSL checkbox first to update the port setting.
* Under Outgoing mail (SMTP), the box next to server requires a secure connection (SSL) is checked. This works flawlessly with Thunderbird and other mail clients therefore it is clearly a shortcoming of the firmware on the DIR-655 i.e. no SSL? This is totally inadequate.
View 5 Replies
View Related
Jan 22, 2013
Currently, we have the AnyConnect client authenticating our users to our AD environment. All is working as desired. Now our Controll Agency is requiring a two step authentication for VPN access. Is it possible (and if so how do you do it) to also configure the AnyConnect client login to send a PIN to the AD usres registered Cell Phone and then require that PIN to be input to make complete the VPN login process?
View 3 Replies
View Related
Dec 14, 2011
I have one ASA 5510, a primary ISP (cable, the single public IP lives on the ASA), and a backup ISP (ADSL, separate router that hosts its single public IP). I use IP tracking to detect link down on the primary. When I pull the plug on the cable modem and go to "Route monitoring", I can see the ASA's default route is now the backup ISP default route.That conforms with [URL] Pings to 8.8.8.8 fail however, and when I do a packet trace the ASA complains about the dynamic nat rule that still points to the primary ISP's interface.Only when I change the existing dynamic NAT rule (on my inside interface) to use the backup ISP's pool (which is a single 192.168.x.y address) , does 8.8.8.8 reply to my pings. So it kinda works but it's not full auto . I can't add a second dynamic nat rule on the same inside interface, nor can I select 2 IP pools in a single dynamic nat rule.
View 4 Replies
View Related
Sep 7, 2012
Lately, I upgrade the firmware on my router. A linksys WRT54G. In order to access the router I had to do a manual reset to factory settings. Post upgrade, for some reason I couldn't access the internet. I tried everything for hours and finally through sheer luck of unplugging every cable and ever power lead and plugging it back in, it started working.
However, lately I've found that the only computer connected to the internet via eathernet cable is loosing connection intermittently. Also we seem to get constant huge spikes in latency and very inconsistent speed. Unplugging the router and plugging it back in again seems to solve this problem temporarily, but requires toggling of power multiple times a day. Also I had what I believe was an IP address conflict, or lack of an IP address once, but using the windows troubleshoot errors fixed that by resetting my wireless network card. (This was on a 2nd machine)
[code]...
View 8 Replies
View Related
May 30, 2011
I have access to free wireless service but it requires a security key? How do I get this key?
View 3 Replies
View Related
Feb 3, 2012
I have a Linksys X3000 router. While it is running, connection latency will gradually increase over about a day until eventually it just stops working at all and I have to power it off and back on again.
Ping times to a local website slowly increase from 30ms immediately after restarting the router, to about 100ms about an hour before it will need to be restarted, then rapidly increase to over 1 second before it drops out completely. When this happens, no connections through the router will work, I cannot even ping it or connect to its configuration web page.
I upgraded the firmware to see if that would work but it didn't. I have had the exact same problems with the 1.0.0 and 1.0.01 versions.
Can I get it replaced? And in the mean time, is there some way to make the router automatically restart at a scheduled time?
View 2 Replies
View Related
Mar 22, 2011
I've just gotten a DIR-615 and replaced a working linksys G router. I configured it to work with my ipad (wireless N), my laptop-win 7 (N), and my desktop-vista (USB connected N). Everything works ok,. I'm using WPA personal, WPA2only, AES encryption, 3600, 802.11n only, auto 20/40 mhz channel width, invisible.
Here's the problem. As I powered up and shut down the laptop each day, it wouldn't connect to the router. I could see the connection, but windows said it couldn't connect. I had to go and unplug the router, count to 10, and then plug it in, and tell the laptop to connect and then it would connect it would be fine.
I thought it might be a compatibility with the laptop driver, but after powering down the desktop today, I had to do the same power cycle on the router to get the desktop to connect. So then I went and turned off the IPAD and had the same thing happen. 3 for 3.
I'm pretty sure its router settings and not the 3 devices, this never happened with the Linksys router, but I don't know what to change.
One other odd thing, when I view the network in windows, the DIR-615 icon is there (for about 15 secs), and then it disappears (for about 5 secs), and then reappears (15 secs), disappears (5 secs), etc. - almost like its dropping out for 5 secs... I haven't noticed a performance hit, but haven't transfer big files yet.
View 14 Replies
View Related
May 2, 2013
I have Dell Studio XPS i5 laptop (64 bit) with DELL Wireless 1397 WLAN Mini Card (version 5.30.21.0 from 1.10. 2008). I recently subscribed for an internet connection that requires 802.11n speed. As my wireless card does not support it what are my options here. Is there a magical link to update my card and start gaining from the maximum speed (30 Mbps or higher if I want) or I have to change the card by buying/installing a new one.
View 14 Replies
View Related
Jun 25, 2011
Where can I download the user manaul for this switch, not the quick start guide?
View 1 Replies
View Related
Sep 27, 2012
I am having a public IP address and it is not configured on any of the router interface on my Cisco router. I am having 3 internal networks. Is there any way to PAT all these 3 internal networks to this public IP?
View 3 Replies
View Related
