Cisco :: LMS 4.0.1 Cannot See Devices

Jul 14, 2011

I have installed LMS. Then I have configured Default Credentional Set. Then start discovery with cdp and arp modules. LMS found my devices, 2 of them are reachable  but other unreacheble. All snmp settings on the devices are the same. I test from LMS connectivity, it works great. Then checked snmp from pc (C:Program Files (x86)CSCOpxobjectsjtin) all tools snmpset and snmp walk works corretly and can get data. How make LMS to get data from devices ?

View 4 Replies


ADVERTISEMENT

TEGs80G - Swap Unmanaged Devices With More Expensive Cisco Devices?

Jun 1, 2012

Currently my home network is being switched via TrendNet TEGs80G unmanaged gig switches. I have been using them for about a year now with no issues. As my home network becomes more advanced, I recently just added a Cisco ASA5505, I am thinking about swapping those unmanaged devices, 4 of them, to managed. I was looking at the Cisco SG300-10 for upstairs, and a 16 port variant for my main core. These devices do not support full Cisco IOS cli, but they are manageable with a rich feature set nonetheless. My question is, should I swap the unmanaged devices with the more expensive Cisco devices, or just keep what works and save the money until I really need to spend it. As previously stated, my home LAN works just fine as it is, however my WiFi, NTV550s, server and workstations are all on the same network. Probably not the most secure but it is what it is without VLAN support.

View 11 Replies View Related

Linksys Wireless Router :: E4200 Can See None Of Devices Attached To Power-line Devices

Aug 15, 2011

I have installed my new E4200 and it works beautifully.  I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses.  If I plug a laptop directly into the Cisco, I can of course see it.However,  I can see none of the devices attatched to the powerline devices?  I have a securty cam connected via the powerline and want to know the IP address.  I checked with cisco technical support via chat and they said it is impossible.  I have used 2 previous routers with the same configuration and can see all devices.

View 1 Replies View Related

Wireless Devices Can't Connect To Wired Devices?

Oct 11, 2012

All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.

View 1 Replies View Related

Cisco :: Devices Don't Show In NCS 1.0

Sep 15, 2011

I've added several switches and one WLC to my new NCS Prime box. I don't see them in the display. If I try to readd one, it says it already exists. What am I missing?

View 0 Replies View Related

Cisco VPN :: ASA 5520 - VPN With Two Devices

Jun 25, 2012

I got a VPN request form from one of our partners. On my side I have one ASA 5520 running 8.0(3) On their form, It says that their endpoints are two boxes, sitting on different cities, It also says that there is only one encryption domain, (actually just one IP) that I need to speficy on the VPN setting. It looks like they mean that you could access the same encryption domain from any of the two Boxes in different cities. This is strange to me, since every time I have set up VPN before, each endpoint has their own encryption domains.I never seen two enpoints with the same encryption domain behind, so Im confused wether it might be a mistake on their part, or this is expected.

View 1 Replies View Related

Cisco :: Devices Not Shown In CS LMS 3.2

Oct 23, 2011

LMS 3.2,the devices are not shown in the CS.
 
In CS Device management no devices are shown(0 devices).But devices are shown in DFM,RME and IPM.

View 7 Replies View Related

Cisco :: Add Some APC UPS Devices Into Works LMS 4.1

Jan 17, 2012

I am trying to add some APC UPS Devices into CiscoWorks LMS 4.1. For example i have three APC Smart UPS 5000 RT RMXLI with management cards AP9619, i have chosen Device Type as "Smart-UPS RT 5000 XL" in Nom-Cisco Devices list, but when i am creating Invetory collection job, i`m getting status failed for this devices and the error is: "RICS0001:Internal Error,unable to process the collected data from the device"

View 1 Replies View Related

Cisco :: Adding New Devices In LMS 4.1

Sep 4, 2011

I've download free trial from cisco site Cisco LMS. I've installed  and now I have a question. how to add a device ?

View 10 Replies View Related

Cisco :: Devices Discovering By LMS 4.0

Oct 9, 2011

I have LMS 4.0 server installed without any problems on windows server Enterprise edition service pack 2 then i enabled SNMP on cisco switches and routers by the following commands [code] But when i tried to discover cisco devices and after trying many times theres no result so correct commands required to be enabled on cisco devices.

View 2 Replies View Related

Cisco :: LMS 4.1 Deleting Devices

Feb 14, 2012

I recently deleted some devices from LMS.  Now, when I run a device credential report, I get the following for the devices that were deleted. Device has been deleted, or is not managed by LMS.

View 1 Replies View Related

Cisco :: LMS 4.0 Devices Not Displaying In DCR

Apr 17, 2012

We are using LMS 4.0 with license of 100 Users. We are managing 12 devices till now. But from last two days I am trying to add a device ( i.e. 2811 router) and after adding the device in DCR (Inventry> Device Administration>Add/Import/ Manage Devices) it displays message i.e. devie added succesfully. But this added device is not displayed in Inventry> Device Administration>Add/Import/ Manage Devices.
 
observation :

1. In managed device list router 2811 is reflecting in Device Type Groups, but not in all devices.

2. New added device is reflecting in Known device list if we generate a report for know device ( under path Reports>Invenrty>Management Status>Known Device List).

View 1 Replies View Related

Cisco :: LMS 4.0.1 DFM Reports No Devices

Aug 9, 2011

Have a problem with LMS 4.0.1 and DFM. In DFM no of the devices leaves the questioned state. Trying to rediscover them starts a process that ends after 20% completion every time. I've put on some debuging, but that does not enable more error messages.Only thing i find is in the log file [code] As I've encoded this to be the SNMP engine ID, which on the device is. [code]

View 4 Replies View Related

Cisco :: LMS 4.2 With Unconnected Devices

Nov 21, 2012

i have added the devices which is not discovered by LMS 4.2 manualy however it seems unconnected according the physical topolgy even though it has snmp community configured , how to add the connection from this device according to physical connectivity of the device.

View 9 Replies View Related

Cisco :: LMS 4.0 - No Devices In Groups

May 13, 2012

I have Cisco LMS 4.0, I have a few tasks which are scheduler every friday and they failed last week. This morning I would like to restart them but I cannon see the devices in my Groups.Under Inventory -> Manage Device State -> User Definied Groups -> I can see my groups but they are empty!I restarted the server and crmdmgtd service but it's not better.

View 5 Replies View Related

Cisco :: Devices Not Importing Into DFM On LMS 3.1 And LMS 3.2.1

Mar 13, 2012

I am running 3.1 and 3.2.1 at different clients.
 
When i run a discovery to it lists the new devices and states that the devices are reachable.If i do a search in device management i see the device with its listed ip and device info.
 
As soon as i search for the device in DFM after manually adding it i get the following message (see attached)I get the same message on both platforms for different devices.I have tried to add it both manually and automatically.

View 7 Replies View Related

Cisco :: LMS 4.0 No Devices Are Getting Added To DCR

Nov 13, 2011

I am installing LMS 4.0 in my site newly I have nearly 1000 devices in network .When i had tried the autodiscovery mode using ping sweep method  the devices are getting discovered but showing us unreacheable . All the devices are going under unreacheable no devices are getting added to the DCR .SNMP settings are configured correctly.
 
whether the autodiscovery will add the devices to DCR or i need to add the devices manually.As per my requierement i need to configure below things , is it possible to configure the same

1)LMS as SYSLOG server
2)LMS should send EMAIL notification if  device goes down , interfaces goes down , memory / cpu goes high  ,switch  module goes down
3)Need to know if cisco releases new device packages how we will update to the cisco works .

View 4 Replies View Related

Cisco :: All Devices Isn't Empty In LMS 4.2

Jun 3, 2012

after upgrading from Prime LMS 4.1 to 4.2 (Windows version) the "All Devices" group and all the other system defined groups are empty.
 
The "Inventory dashboard" shows 397 reachable devices which is correct. I can access the devices when I type the name into the search field in the upper right corner of the LMS page.
 
When I open a device selector (e.g. from the "Device Management" tab) all system defined groups are empty.
 
When I make a new user defined group with the definition "IP address contains '1'" I get a group with all devices.

View 8 Replies View Related

Cisco :: LMS 4.0 Supported Devices?

Jul 14, 2011

There is support of devices not manufactured by cisco?For example satellite modems.

View 1 Replies View Related

How To See All Devices On LAN

Mar 14, 2012

I would really like to know how to see all the devices that are connected to a specific router. I know in windows, command prompt, you say: net view, and it will display all the pc's connected to the router/in the LAN, but it DOES NOT SHOW the smartphones connected to that same router. I have 3 laptops connected via WiFi, I can see them, but I cannot see the 4 smartphones I have that is also connected to the LAN. How can I see them as well?

I know that they have IPv6 addresses assigned to them, is that the problem(that they do not have IPv4 adressess?)

View 3 Replies View Related

Cisco :: VPN Failing Between Two Pix Devices (DEBUG)

Oct 3, 2012

My tunnel had been running fine for a couple of months. Now, not so much.Here is some debug.

View 6 Replies View Related

Cisco :: LMS 4.2 Apply One Command To All Devices

Nov 29, 2012

how to apply one command "wr" to all my Cisco Devices Managed by LMS 4.2?

View 2 Replies View Related

Cisco VPN :: 871 Passing Traffic Between Two VPN Devices Within A LAN

Sep 21, 2012

I have a vendor that currently uses a Cisco 871 as a VPN router in our company network, they use it connect to provide services to one of the servers in our LAN for our customers. Recently, we are going to be setting up a 24/7 call center with this vendor, they will be accessing a server in our network through the VPN to provide customer service during after hour periods.We have a problem however, with an application that is hosted by another vendor that is critical for our regular company call center. Access is reached with this application through this vendor by way of IPSec VPN tunnel that is built in our company's Cisco ASA 5510. This application is accessed via Internet Explorer that goes across to access the application at the endpoint
 
I need to figure a way by which the vendor that will be running the 24/7 call center coming through their tunnel in our network to connect over to the tunnel on the vendor on my ASA. Im likely going to have to set some routing of traffic in my internal default gateway router for this to work.

View 2 Replies View Related

Cisco :: LMS 3.2.1 Can't Select Devices In NetConfig

Jan 19, 2012

After upgrading to LMS3.2.1 I cant select devices in Netconfig. There seams to be a defect in the selection box:you have Task selection twice (left task-selector headlined with Device Selector) instead of device-selector left and task-select right.What can we do to can use netConfig?

View 1 Replies View Related

Cisco :: LMS 3.01 - Inventory Failure On Various Devices

Nov 23, 2011

We have several unknown devices within our inventory.  When running an inventory report the message I get back is "No Credentials available".
 
For inventory checks is it just SNMP that is used or is it the standard credentials that are needed ?
 
I am planning to edit the credentials for the single device manually to see if this makes a difference.  Our integration is with ACS and we have a machine account with admin priveleges.
 
Device Verification for the device states "Device Not reachable" for SNMP and SSH.  There are no drops on any of our firewalls but snmpwalk does work from the command prompt from the LMS server.
 
Are there any further checks I can make for these 2 messages:
 
* "No Credentials available". * "Device Not reachable"

View 2 Replies View Related

Cisco :: LMS 4.0 - Inventory Is Not Collected For Devices?

May 21, 2011

I have been having problems getting devices into DFM once I enable fault management.I am now having issues with the basic LMS / RME I am getting the following issue:"No Device exists in LMS or Inventory is not collected for devices."I experienced this before and resolved by reapplying the licence.The issue has gone from - all devices discovered and added to LMS and DCR ok turned on Layer 2 Topology and Faults and then no devices appearing in DFM.after restarting the Daemon manger I have no devices in LMS. total device approx 1900 - standalone setup.

View 5 Replies View Related

Cisco WAN :: 1841 EOL And EOS Status Of Devices

Jan 17, 2011

I want to use 1841 router for implementation in one project but I could not find out from where I can get End of Sale, End of Life and End of Support details for this router, any links so that I can dig out Cisco is maintaining these details at some of its portal but where.

View 10 Replies View Related

Cisco :: LMS 4.0.1 DFM Fault Monitor No Devices Are Available

Jul 11, 2011

Despite there are all devices are managed in DFM (accorduing to Collection Summary Portlet or Rediscover devices) there are no devices in the Fault Monitor with the message "No devices are available"Does it mean, we have absolutly no faults in our network or does it mean that we have a problem with DFM?

View 2 Replies View Related

Cisco :: LMS 4.2 Backup Configuration Of Devices

Nov 29, 2012

How to backup the configuration of Cisco devices managed by LMS 4.2 and store it in Folder , than restore it once it need it

View 10 Replies View Related

Cisco AAA/Identity/Nac :: Bug In ACS 5.1 When Importing Devices

Sep 20, 2011

there seems to be a problem when I try to import a .csv file to ACS 5.1. After following the procedures for file exports and clicking finish I am left with the screenshot of the ImportAction window attached. According to documentation this window should allow you to monitor the progress of the bulk operation,but there is none of it.

View 3 Replies View Related

Cisco :: LMS 4.0.1 All Devices Are Unknown After Update

Apr 15, 2012

After successfully install a device update for Common Services, all devices are reported as unknown.Number of Packages Selected for Install : 2

-For Product(s) : Common Services
-Install Invoked by user : ameconi
-The Package(s) Selected for Install :
 
When I try to install other updates these fail because MDF is version 1.59.

View 15 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.2 - Add DACL To 2 Devices?

Dec 15, 2011

I have an ASA 5510 on the outside with a Remote Access VPN.  The user will need to get from the 5510, then go through an ASA 5540, then out to the subnet where they will be doing their work.  I have a Cisco ACS version 5.2 that sits on a separte VLAN off of the 5540.  I can authenticate users with Radius on the 5510 VPN and use DACLs from the ACS with no problems.  However, the DACL only gets downloaded to the 5510 (as expected) and I need it to also download to the 5540.  Is there a way to do this?  I understand this could mean multiple authentications needed somehow.  Right now when I authenticate, the DACL shows up fine in the 5510, but I get blocked from the devices I need to get to because it of course is not getting added to the 5540 as well. 

Here's the basic topology I have:
 
remote client
|
|
(outside--internet--VPN)
5510
(vlan X)

[code]....

View 5 Replies View Related

Cisco :: IOS Devices Can't Connect To RV220W

Nov 14, 2012

I just installed this WAP, updated the firmware. Windows computers can connect. iPads and iPhones can't connect. All iOS devices are runnign 6.01. The iPad can see the nework and it says it joins, but it can't browse the Internet. The iPhone does not even see the SSID. The WAP is pretty much at the defaults. I am using WPA personal, 5GHz. The iOS devices were working fine with the Netgear that was installed previousley. I checked this article and the WAP seems to be configured right:

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved