How To See All Devices On LAN
Mar 14, 2012
I would really like to know how to see all the devices that are connected to a specific router. I know in windows, command prompt, you say: net view, and it will display all the pc's connected to the router/in the LAN, but it DOES NOT SHOW the smartphones connected to that same router. I have 3 laptops connected via WiFi, I can see them, but I cannot see the 4 smartphones I have that is also connected to the LAN. How can I see them as well?
I know that they have IPv6 addresses assigned to them, is that the problem(that they do not have IPv4 adressess?)
View 3 Replies
ADVERTISEMENT
Aug 15, 2011
I have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
View 1 Replies
View Related
Jun 1, 2012
Currently my home network is being switched via TrendNet TEGs80G unmanaged gig switches. I have been using them for about a year now with no issues. As my home network becomes more advanced, I recently just added a Cisco ASA5505, I am thinking about swapping those unmanaged devices, 4 of them, to managed. I was looking at the Cisco SG300-10 for upstairs, and a 16 port variant for my main core. These devices do not support full Cisco IOS cli, but they are manageable with a rich feature set nonetheless. My question is, should I swap the unmanaged devices with the more expensive Cisco devices, or just keep what works and save the money until I really need to spend it. As previously stated, my home LAN works just fine as it is, however my WiFi, NTV550s, server and workstations are all on the same network. Probably not the most secure but it is what it is without VLAN support.
View 11 Replies
View Related
Oct 11, 2012
All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
View 1 Replies
View Related
Jun 11, 2011
I wasn't sure where to post this as I'm not using cisco to do the network withwhat happens to a network when it goes over 255 devices that need IP address, how does the IP addressing then work?
View 8 Replies
View Related
Jan 12, 2013
Im trying to get my pc upstairs to play music to my wireless speaker downstairs via the 2 routers. Im unable to see any devices on the network from my pc upstairs.
View 3 Replies
View Related
Feb 7, 2011
I am in a manufacturing test scenario and need to connect multiple devices with the same IP address (identical hardware all with the same fixed IP) to one Windows 7 desktop for the purposes of testing.I have a 3Com SuperStack II Switch 1100 that I am using as my switch. This switch supports VLAN and I have set up a number of VLANs, 1 for each device, with the host machine residing in all of the VLANs. I need to connect to these devices via SSH, preferably all simultaneously.'m thinking this will work except I have no idea how to differentiate ssh traffic to/from any 1 of the VLANs to the host.
View 13 Replies
View Related
Jan 2, 2013
I had a BT homehub with regular dropouts. I have changed it for a Belkin wireless router. I am now unable to stream music from laptop to Yamaha 671 or connect with wifi printer.My internet is working fine and I can communicate with my Dreambox and Vu Duo with no problem at all. Both these devices and the Yamaha are hard wired to the router.
View 2 Replies
View Related
Jul 14, 2011
I have installed LMS. Then I have configured Default Credentional Set. Then start discovery with cdp and arp modules. LMS found my devices, 2 of them are reachable but other unreacheble. All snmp settings on the devices are the same. I test from LMS connectivity, it works great. Then checked snmp from pc (C:Program Files (x86)CSCOpxobjectsjtin) all tools snmpset and snmp walk works corretly and can get data. How make LMS to get data from devices ?
View 4 Replies
View Related
Aug 23, 2011
One is my HOME the other is my CARAVAN SITE. both networks are working fine independently, the problem occurs when i join the networks togetherI need to connect the said networks together in order to view my IP cameras which are dotted all around the campsite, i need to be able to view these from HOME.The problems i am having is DHCP servers are stealing clients from the other sides and directing them to the wrong gateway.please see below network map (these routers are all running DDWRT)Below is another network map which someone on another forum told me to do but its still not working. (DHCP servers are still clashing and still stealing clients)by the way, on both of the network maps all routers are connected with the LAN interface. someone told me to connect certain routers with WAN and it didn't work, or it was not explained correctly.Also please note that assigning clients with Static IP's is completely out of the question due to most of the clients being campers who come and go.
View 9 Replies
View Related
Sep 21, 2012
I have several network shares in my home using two different NAS devices.I am looking for recommendations for backing up the data on these devices.I currently use CrashPlan for backing up my computers.I have 1 share (documents) that I would like to somehow get backed up to CrashPlan (I'm not specifically tied to CrashPlan, it's just what I'm using now). The rest of the shares I would like to just backup locally in the event of hard drive failure.I have tried having my iMac mount the documents share automatically and include that in the CrashPlan backup, but it seems unreliable.
View 6 Replies
View Related
Nov 14, 2012
My internet down my road went out a while ago for a week and it came back on fine but ever since the B.T. tech came over after to check the router it's been only allowing a couple of devices on at a time!I know it's not the devices because if I keep turning my router off and on it will work eventually but when reset then something else can't connect.Here is the details from a pc that i've got connected:Windows IP ConfigurationWireless LAN adapter Wireless Network Connection[CODE]
View 14 Replies
View Related
Dec 16, 2012
For everybody else in the house the internet works fine on their devices, however, on my laptop and ipod it will often not allow me to connect for ages, but then finally connecting (without me changing anything)
View 3 Replies
View Related
Aug 26, 2011
My home network currently consists of the following components...
BT Homehub 3 router - B/G/N
PC running Windows 7 and using a Edimax wireless pci adaptor - B/G/N
XBox 360 with live connection - N
Laptop with inbuilt wifi and no slots for another card except via USB - G
Various phones - G
Everything in the house is running at ~ 26-54 Mb/s at the moment and the two N devices have a very weak signal due to their distance from the router. Unfortunately, moving the router to somewhere that will benefit one device will have a detrimental effect on the other due to their locations.The router has the option to switch on 40mhz (mbit???) which, I gather, is also known as channel bonding and this should boost the range and speed of the N service but I also gather that doing this will stop all the G devices from connecting at all.I still have the Homehub 2 router that I was using before so I was wondering if there is any way I could make use of this (or anything else) to allow me to use all devices in the house at their fastest speeds.
View 3 Replies
View Related
Aug 23, 2011
I have a problem with my 2 networks which are 1000 meters apart.One is my HOME the other is my CARAVAN SITE. both networks are working fine independently, the problem occurs when i join the networks together.I need to connect the said networks together in order to view my IP cameras which are dotted all around the campsite, i need to be able to view these from HOME.The problems i am having is DHCP servers are stealing clients from the other sides and directing them to the wrong gateway.please see below network map (these routers are all running DDWRT)if(GetCookie('computingnet_image') == 'yes') { document.write(''); }Below is another network map which someone on another forum told me to do but its still not working(DHCP servers are still clashing and still stealing clients)by the way, on both of the network maps all routers are connected with the LAN interface.someone told me to connect certain routers with WAN and it didn't work, or it was not explained correctly.Also please note that assigning clients with Static IP's is completely out of the question due to most of the clients being campers who come and go.
View 1 Replies
View Related
Sep 26, 2011
I would like to connect a variety of wireless devices in my house to my work VPN while allowing other devices in the house access to my home network as normal.I was hoping to find a wireless ADSL router that allows me to associate a LAN port to a VPN connection, then connect a wireless access point to that port. I could then run two wireless networks in my house, one that would connect to my work VPN and the other that would not.
View 1 Replies
View Related
Oct 16, 2011
We've had this issue of not being able to have all our devices online at the same time for at least a year now...
[code]....
View 15 Replies
View Related
Sep 29, 2012
My laptop stopped connecting to the Internet eventhough our other laptop has no issue - tried resetting modem, router and bypassing router -- it shows my wireless network and says its connected as local only - tried TCP/IP reset and restarted but still same, when i did the winsock, ipv4, ipv6 command prompt i get an error on the ipv4 - resetting echo request failed? I also tried uninstalling my network adapters in safe mode and restarting but same issue still
View 7 Replies
View Related
Aug 31, 2012
I have been using the same wireless setup in my home for over a year. We have a Belkin Surf wireless router and an Arris modem from Comcast, using cable internet from Comcast. In the house, we have 5 devices that are set up to automatically connect wirelessly: iPhone 4, an old iPod touch, a MacBook Pro, a Toshiba laptop, and a Brother printer. Until recently, there has never been a problem with connectivity.
Lately, certain devices have been losing connection. For example, last night my husband and I were both using our laptops with no problems.This morning, his is connected and my iPhone is connected,but my Mac is not (I get a timeout error and am not connected to the internet). Sometimes it's his laptop that drops the connection. Other times it's my son's iPod or my iPhone. It is never all of the devices at once (something is always connected), and each device always recognizes the network as existing yet cannot connect to it.
I have also tried to change the channel that the router is set to, but that has not seemed to solve anything. The firmware is up to date. We are password protected in an area with few neighbors, and there never are any unknown devices connected when I check the client list for the router.
View 10 Replies
View Related
Apr 19, 2012
My laptop won't connect to my wifi. No idea why. I've restarted it, the router and the modem but it didnt work. Thing is it says that it can pick up signal on my wifi but it won't connect. The desktop computer works fine and mom's Nook connects to wifi and works fine, it's just my laptop not working. I've also tried connecting it directly to the modem and it still won't connect.
View 5 Replies
View Related
May 19, 2011
How to feel about having network devices resolve names? Do you typically do it? No? Why or why not?I feel like I haven't seen it set up a lot, but it could certainly be good for specifying logging hosts and things like that.
View 7 Replies
View Related
Jan 19, 2012
Ok my Routers Sercurity Settings are on WPA/WPA2-Personal (PSK). But on this setting it does not allow me to use all my wireless devices. They appear with errors stating that i must change my sercurity settings to WEP. So i tried this, i first changed it to 128bit WEP and it connected to my other devices. But the router suddenly began automatically shutting off its wireless capabilities at frequent random intervals (the LED showing its function shutting off and all wireless internet sources). So i changed it back to my original settings and it fixed itself, but once again i could not access my devices. So i tried using the 64bit WEP option and once again it proved the same results as the 124bit WEP.
View 6 Replies
View Related
Feb 8, 2013
I'm going to be building a PC. I want to use ethernet cable instead of wireless for it. To do so, we're having a contractor install ethernet outlets in each of the rooms in the house, however that's going to work.So I'll have one in my room.I want to hook up my PS3, Xbox 360, Apple TV, and my desktop up to the one outlet in the wall, without having to change them at any time manually. But I also want to be able to use them at once without having to turn them off.Say I'm playing an Xbox game, but I can't save it. An NHL game comes on and I want to watch it, so I change my TV to the PS3 input and watch the NHL game. While watching the NHL game, I want to browse on my PC.
View 9 Replies
View Related
Jun 7, 2012
my d-link modem is connected and was providing great wireless service to numerous devices around the house until yesterday. The wireless lights are on and stable, but we can't connect. We've tried resetting and turning off to no avail. This computer is connected via an ethernet cable through the modem
View 5 Replies
View Related
Mar 4, 2011
I have two devices in my office which both need to be accessible externally. One is an FTP server (Hermstedt Stingray), the other is a NAS drive (Lacie). I don't have a static IP so have instead configured an account with DYNDNS. My understanding is that by using this method, only one device will be ever be accessible because of the one single dynamic IP. Is this correct? Or is there a way of configuring something somewhere (DYNDNS, router etc) so that both my devices can be accessed externally.
View 3 Replies
View Related
Sep 26, 2012
During the summer we had three laptops and an iPod. Two of the laptops and the iPod were having trouble connecting to the Internet, but I thought that was because we had too many devices but I looked it up and most sites said that wasn't true.
Now we have two laptops and the iPod and there are still problems so I thought it was a modem issue. It's a Webstar DPC2100R2 and when the Up and Down lights go off our wireless has trouble but if I use cord which goes through a D-Link DIR-615, the Internet is fine. When the lights go out I usually turn off both devices and turn them back on after about a minute and that usually works.But then, the lights didn't come back on so I called my Cox, my provider and they did something that fixed for about a week then the two lights went out again. Yesterday I reset them again and my Acer Aspire connected and so did my iPod but my HP Pavilion couldn't so I reset it again. Now my HP and iPod work but my Acer doesn't even though I've reset it multiple times.
What's weird is that the HP never has any trouble connecting, even when the lights aren't on or when my iPod, Acer and my sister's Dell couldn't.
View 6 Replies
View Related
Aug 31, 2011
I purchased a D-Link switch that supports MDI-X so I should be able to use only straight through cables according to the manual. My Router (Wrt54gs) also supports MDI-X, yet when I plug a straight through cable from port 4 on router to port 1 on the switch -> then a straight through from port 2 on the switch to my computer, I don't get an IP address.If I connect a crossover cable from the router to port 1 on D link switch -> then straight through from port 2 to computer, it works just fine.I am going to purchase an extra crossover cable to use for this but I'm really curious as to why it wont work this way? DES-1105 is the model of the switch. "THE DES-1105 CAN BE CONNECTED TO ANOTHER SWITCH OR OTHER DEVICES (ROUTERS BRIDGES ETC) VIA A TWO-PAIR CATEGORY 3,4,5 UTP/STP STRAIGHT THROUGH OR CROSSOVER CABLE."
View 2 Replies
View Related
Jan 9, 2009
I have disabled all antivirus and firewall services on my PC and I can't get Shareport icon to turn green and recognize my DIR-655 (Hardware Version A4, 1.21 firmware). I've uninstalled the Shareport software twice. I use AVAST (but all services are disabled).The router setting is set to "USB Network" with a 30 second time out. I'm running WinXP SP3, 802.11G only.
View 11 Replies
View Related
Oct 3, 2010
My wired devices can see my wireless devices, and my wireless devices can see my wired devices, but my wireless devices can't see other wireless devices. And by "see", I'm talking about various media servers, like TVersity, PlayOn and Windows Media Center, and by devices, I have two wireless computers, an Xbox, and a DAP-1522 bridge, among others.Is this how the DIR-825 works, or am I missing a setting to allow the wireless devices to see and communicate with each other? Specifically, I'm trying to connect my wireless N Xbox 360 with a wireless N Win 7 Home Pro laptop.
View 2 Replies
View Related
Sep 15, 2011
I've added several switches and one WLC to my new NCS Prime box. I don't see them in the display. If I try to readd one, it says it already exists. What am I missing?
View 0 Replies
View Related
Jun 25, 2012
I got a VPN request form from one of our partners. On my side I have one ASA 5520 running 8.0(3) On their form, It says that their endpoints are two boxes, sitting on different cities, It also says that there is only one encryption domain, (actually just one IP) that I need to speficy on the VPN setting. It looks like they mean that you could access the same encryption domain from any of the two Boxes in different cities. This is strange to me, since every time I have set up VPN before, each endpoint has their own encryption domains.I never seen two enpoints with the same encryption domain behind, so Im confused wether it might be a mistake on their part, or this is expected.
View 1 Replies
View Related
Oct 23, 2011
LMS 3.2,the devices are not shown in the CS.
In CS Device management no devices are shown(0 devices).But devices are shown in DFM,RME and IPM.
View 7 Replies
View Related
Jan 17, 2012
I am trying to add some APC UPS Devices into CiscoWorks LMS 4.1. For example i have three APC Smart UPS 5000 RT RMXLI with management cards AP9619, i have chosen Device Type as "Smart-UPS RT 5000 XL" in Nom-Cisco Devices list, but when i am creating Invetory collection job, i`m getting status failed for this devices and the error is: "RICS0001:Internal Error,unable to process the collected data from the device"
View 1 Replies
View Related
