I'm going to be building a PC. I want to use ethernet cable instead of wireless for it. To do so, we're having a contractor install ethernet outlets in each of the rooms in the house, however that's going to work.So I'll have one in my room.I want to hook up my PS3, Xbox 360, Apple TV, and my desktop up to the one outlet in the wall, without having to change them at any time manually. But I also want to be able to use them at once without having to turn them off.Say I'm playing an Xbox game, but I can't save it. An NHL game comes on and I want to watch it, so I change my TV to the PS3 input and watch the NHL game. While watching the NHL game, I want to browse on my PC.
I've been offered a position for an at home call center agent, one stipulation is that my office is upstairs from my router and I cant use wifi, so has anybody used that device where you plug an adapter into 2 of your electrical outlets, on one end you connect your router and the other you connect your computer, so anybody know of a good brand at a good price
Below module showing inlet and outlet temperature N/o.How to find the issue related to sensor in the module or something else to troubleshoot in the module to find the issue.
My Dell Lattitude E6420 WIFI adapter disables anytime I plug my laptop into the adapter and electric wall outlet. It has the Intel Centrino Advanced-N 6205 adapter. I've downloaded the latest drivers, updated the power settings on the adapter etc. it's becoming a real problem as I often have to be mobile moving from office to office and up having to stay on battery power until it almost dies to avoid having to go into Device Manager each time I plug back into to re-Enable my adapter.
I have several 2960s and 3750s and two 6506 (ws-cac-3000w) recently move to new location The power outlet is the same ,but Volt is different current 2960/3750 use this(one phase 3 wire) 220v and new location change to (from 3 phase 4 wire -> one phase 220v)6506 current using(one phase 3 wire) and will be change to (from 3 phase 4 wire -> one phase 220v)
I had search doc about power supply /cable , only show support single phase 220 v ,but not description vlot between each wire !!Does new location power outlet suit for 2960/3750s power and 6500 ws-cac-3000w ?!? Do I need chane power outlet back to current using?
I have been using the E3000 for quite a while. A problem that I could not find a solution to is that the devices connected through Ethernet can't be viewed on Wireless, and vice versa. This is especially annoying because I want to get access to my media servers over wireless, for obvious reasons, but even those are not viewable (and using IP addresses on portables is a pain in the back)
I have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
Currently my home network is being switched via TrendNet TEGs80G unmanaged gig switches. I have been using them for about a year now with no issues. As my home network becomes more advanced, I recently just added a Cisco ASA5505, I am thinking about swapping those unmanaged devices, 4 of them, to managed. I was looking at the Cisco SG300-10 for upstairs, and a 16 port variant for my main core. These devices do not support full Cisco IOS cli, but they are manageable with a rich feature set nonetheless. My question is, should I swap the unmanaged devices with the more expensive Cisco devices, or just keep what works and save the money until I really need to spend it. As previously stated, my home LAN works just fine as it is, however my WiFi, NTV550s, server and workstations are all on the same network. Probably not the most secure but it is what it is without VLAN support.
All of a sudden my laptop, android phone and blu ray player (all wireless devices) can't communicate with my wired devices (marantz receiver and samsung tv). Everything still connects to the internet independently but i can't for instance play music from my wireless laptop to my wired marantz receiver. I had no trouble with this last week and didn't change anything (that I'm aware of) I did get Verizon to switch out my router but it didn't solve anything. My wife's computer also cannot connect to wired devices. Lastly, if I connect my laptop with via ethernet cable it sees wired devices fine. I tried shutting off windows firewall but didn't work. I have no other firewall/virus software installed. I can ping to all devices (wired and wireless) from my laptop.
I am having a problem with my Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC. It is not detecting my ethernet cable, and thus leaving me without internet on my desktop, after i updated its driver. The cable is not the problem as I have tested the cable with my laptop. I tried rolling back drivers, doing system restore and removing drivers with driversweeper and letting windows install the drivers again. However, none of these worked for me. I doubt the NIC is faulty as it was working before i updated the drivers. I am using windows 7 home premium 64-bit.
I curently have 2 Data centers connected with a Metro Ethernet Connection. Each Data Center has 6500 with Sup720s. The Metro Ethernet connection is currently conected by a L3 routed interface. I now need to enable VRFs between the locations and want to determine the best way to adjust the Mero. I was considering adjusting the routed interface to use Ethernet sub-interfaces. Each VRF would be given a different subinterface over the Metro Ethernet connection. I have done this on internal LAN connections but am concerned about exteding across data centers over Metro E.
I've had trouble connecting to my own internet and have no wireless. I'm using my neighbor's wireless and it's really slowing her's down. I've tried restarting my laptop (it usually works) and then reinstalled the device under "device manager". It's not the cord, I've checked with my neighbor's laptop and it works fine.I use a Sony Vaio VGN-NS140E with Windows Vista SP2.
------------------------------------------------------------------------ {ipconfig /all} This is while I only have an ethernet plugged in and no wifi connection. Windows IP Configuration Host Name . . . . . . . . . . . . : FairyHo
I just got a new Xbox today, and use the integrated WiFi card. I was lagging like Crysis 2 on a 6800 GT (forget it). I just got a CAT .5 cable, and plugged it into modem/xbox and IDK... it works, I'm online, but basically my question is:Does ethernet connections have less ping (better) than wireless connections? This is with the Xbox 360 Slim. I know it improves upload, and download, but what about ping?
I have a Dell XPS M1530 with Vista 32 bit. When i plug in a cable i get nothing, no error, and the comp does not recognize that a cable has been plugged in. I think that this started after my Hard drive failed and Dell replaced it but i'm not positive. No errors (? or !) in Device Manager and I can't find the Marvell 88E80XX 10/100 Ethernet Controller in device manager. I have attempted to Reinstall the drivers. The wireless is still working. I have one Light to the right of the port that is on all the time solid but no flashing with the cable in or out.
I've got a router on which I run a backup/media/print server, a couple of computers and a voip box. My router has only four ethernet lan sockets which are thus all occupied by the above, but I need to attach at least one further device b
Secondly, could a splitter such as >> this one << do the job? I'm guessing this basically split a single 4-pair ethernet connection into two 2-pair ethernet connections.
Is there a difference in an ethernet cable and an Ethernet networking cable? I have an Ethernet cable and a 6 port splitter I am trying to connect. I have 4 ports in the router that are in use. When I connect them to the splitter nothing s working.
I work for a place that has its own TV broadcast system. From the central site we have contracted fiber connectivity to each of our 10 remote locations. To each location we currently have fiber for data (1Gbps) and fiber to transport our TV channels. Am am looking for a device that can take in our TV channels on coax and give me an rj45 ethernet connection so I can plug the unit into a data switch to use our data fiber for everything (if I need 10 units at the central site to do this, that is fine).taking the ethernet back to coax to distribute TV to all of the TVs in the building. This would eliminate me 10 point to point fiber links.
I would really like to know how to see all the devices that are connected to a specific router. I know in windows, command prompt, you say: net view, and it will display all the pc's connected to the router/in the LAN, but it DOES NOT SHOW the smartphones connected to that same router. I have 3 laptops connected via WiFi, I can see them, but I cannot see the 4 smartphones I have that is also connected to the LAN. How can I see them as well?
I know that they have IPv6 addresses assigned to them, is that the problem(that they do not have IPv4 adressess?)
I wasn't sure where to post this as I'm not using cisco to do the network withwhat happens to a network when it goes over 255 devices that need IP address, how does the IP addressing then work?
Im trying to get my pc upstairs to play music to my wireless speaker downstairs via the 2 routers. Im unable to see any devices on the network from my pc upstairs.
I am in a manufacturing test scenario and need to connect multiple devices with the same IP address (identical hardware all with the same fixed IP) to one Windows 7 desktop for the purposes of testing.I have a 3Com SuperStack II Switch 1100 that I am using as my switch. This switch supports VLAN and I have set up a number of VLANs, 1 for each device, with the host machine residing in all of the VLANs. I need to connect to these devices via SSH, preferably all simultaneously.'m thinking this will work except I have no idea how to differentiate ssh traffic to/from any 1 of the VLANs to the host.
I had a BT homehub with regular dropouts. I have changed it for a Belkin wireless router. I am now unable to stream music from laptop to Yamaha 671 or connect with wifi printer.My internet is working fine and I can communicate with my Dreambox and Vu Duo with no problem at all. Both these devices and the Yamaha are hard wired to the router.
I have installed LMS. Then I have configured Default Credentional Set. Then start discovery with cdp and arp modules. LMS found my devices, 2 of them are reachable but other unreacheble. All snmp settings on the devices are the same. I test from LMS connectivity, it works great. Then checked snmp from pc (C:Program Files (x86)CSCOpxobjectsjtin) all tools snmpset and snmp walk works corretly and can get data. How make LMS to get data from devices ?
One is my HOME the other is my CARAVAN SITE. both networks are working fine independently, the problem occurs when i join the networks togetherI need to connect the said networks together in order to view my IP cameras which are dotted all around the campsite, i need to be able to view these from HOME.The problems i am having is DHCP servers are stealing clients from the other sides and directing them to the wrong gateway.please see below network map (these routers are all running DDWRT)Below is another network map which someone on another forum told me to do but its still not working. (DHCP servers are still clashing and still stealing clients)by the way, on both of the network maps all routers are connected with the LAN interface. someone told me to connect certain routers with WAN and it didn't work, or it was not explained correctly.Also please note that assigning clients with Static IP's is completely out of the question due to most of the clients being campers who come and go.
I have several network shares in my home using two different NAS devices.I am looking for recommendations for backing up the data on these devices.I currently use CrashPlan for backing up my computers.I have 1 share (documents) that I would like to somehow get backed up to CrashPlan (I'm not specifically tied to CrashPlan, it's just what I'm using now). The rest of the shares I would like to just backup locally in the event of hard drive failure.I have tried having my iMac mount the documents share automatically and include that in the CrashPlan backup, but it seems unreliable.
My internet down my road went out a while ago for a week and it came back on fine but ever since the B.T. tech came over after to check the router it's been only allowing a couple of devices on at a time!I know it's not the devices because if I keep turning my router off and on it will work eventually but when reset then something else can't connect.Here is the details from a pc that i've got connected:Windows IP ConfigurationWireless LAN adapter Wireless Network Connection[CODE]
For everybody else in the house the internet works fine on their devices, however, on my laptop and ipod it will often not allow me to connect for ages, but then finally connecting (without me changing anything)
My home network currently consists of the following components...
BT Homehub 3 router - B/G/N PC running Windows 7 and using a Edimax wireless pci adaptor - B/G/N XBox 360 with live connection - N Laptop with inbuilt wifi and no slots for another card except via USB - G Various phones - G
Everything in the house is running at ~ 26-54 Mb/s at the moment and the two N devices have a very weak signal due to their distance from the router. Unfortunately, moving the router to somewhere that will benefit one device will have a detrimental effect on the other due to their locations.The router has the option to switch on 40mhz (mbit???) which, I gather, is also known as channel bonding and this should boost the range and speed of the N service but I also gather that doing this will stop all the G devices from connecting at all.I still have the Homehub 2 router that I was using before so I was wondering if there is any way I could make use of this (or anything else) to allow me to use all devices in the house at their fastest speeds.
I have a problem with my 2 networks which are 1000 meters apart.One is my HOME the other is my CARAVAN SITE. both networks are working fine independently, the problem occurs when i join the networks together.I need to connect the said networks together in order to view my IP cameras which are dotted all around the campsite, i need to be able to view these from HOME.The problems i am having is DHCP servers are stealing clients from the other sides and directing them to the wrong gateway.please see below network map (these routers are all running DDWRT)if(GetCookie('computingnet_image') == 'yes') { document.write(''); }Below is another network map which someone on another forum told me to do but its still not working(DHCP servers are still clashing and still stealing clients)by the way, on both of the network maps all routers are connected with the LAN interface.someone told me to connect certain routers with WAN and it didn't work, or it was not explained correctly.Also please note that assigning clients with Static IP's is completely out of the question due to most of the clients being campers who come and go.
I would like to connect a variety of wireless devices in my house to my work VPN while allowing other devices in the house access to my home network as normal.I was hoping to find a wireless ADSL router that allows me to associate a LAN port to a VPN connection, then connect a wireless access point to that port. I could then run two wireless networks in my house, one that would connect to my work VPN and the other that would not.
