Cisco Routers :: RV220W Firmware Update Fails?
Sep 4, 2011
I've previously upgraded the firmware on our RV220W from 1.0.0.26 to 1.0.1.0 without any problems but all attempts to upgrade to the latest version 1.0.2.4 fails with the following message "Upgrade failed due to invalid/corrupted firmware". The router then automatically reboots with the current firmware.
We've already tried re-downloading and applying the update from several different machines using different operating systems and browsers without success. How to apply this firmware version successfully? We really need one of the VLAN fixes included in this latest version!
View 3 Replies
ADVERTISEMENT
May 14, 2012
we are going to see a firmware update for the RV220W before it becomes obsolete?
View 36 Replies
View Related
Nov 17, 2011
i got the RV042 and want to update the fw to 4.04.xx . After a few minutes, the browser wanted to perform the update again. I agreed and now, the webinterface isnt available and i cant get a IP from the router. So I tried to reset the router twice. After no success, I performed a factory-reset, which should work when I pressed the reset-button at least for 30 sec.Now the DIAG-LED blinks in a ~5sec rythm.What can I do?
View 2 Replies
View Related
Oct 20, 2011
Is there any timeframe on an update for the RV220W firmware? I have had to take mine out of production due to it freezing up/locking up under medium loads. DNS queries (dig) don't respond, pings outside of the network don't respond. Pings to the router DO respond. SSH responds but I have no login info to proceed further. The config (web) page doesn't respond. Interesting enough nntp (news groups) DO respond and download fine. Eventually the unit catches up and the config page shows back up. I wish there was a way to login via the ssh to see what is going on internally with processes. I will have to find time eventually. Right now my old Linksys 54G with DD-WRT is smoking the Cisco router's performance.
View 2 Replies
View Related
Mar 13, 2012
I have tried to update firmware on a RV220W. Something stopped and now it won`t start. The power led blinks a few times and goes off, the LAN and WAN port wich is connected is lit. I have tried 10 seconds reset button but nothing happens.
View 1 Replies
View Related
Sep 25, 2011
I just bought an RV220w. My first act was updating th firmware to 1.0.2.4. Unfortunately I was not able to configure the router for vlan purpose 'cause the "Port VLAN" point was missing in the webinterface. I performed several factory reset but it didnt work for me - so I got back to firmware 1.0.1.0.
View 9 Replies
View Related
Apr 24, 2011
I bought my DIR-825 three months ago. The firmware seem to be from 2009, and the check-for-later-firmware functionality from the web interface tells me that my version (Current Firmware Version : 2.01EU) is the latest.
I don't believe that the firmware from 2009 is the latest, but have no idea on how to proceed.
My hardware in the web interface say this: (Hardware Version: B1 Firmware Version: 2.01E
The problem I really have is related to PPTP pass through (I think), but I thought making sure I have the latest firmware is always a smart move.
So, can the firmware-checker of the web-interface fail, or do I have the latest firmware?
View 6 Replies
View Related
Sep 23, 2009
Trying to update my firmware 1.00.01 B15 to 1.00.01 B17. I downloaded the firmware to my desktop (using mac os X 10.5.5) and connected my computer directly to port 1 on the back of the router. I used the Firmware upgrade tool under the Administration tab to upload the new firmware file. The update progress starts but fails at 98%
View 4 Replies
View Related
Jun 16, 2008
I purchased a WRT160N router last Friday. After setting it up, everything seemed to work fine, but after a couple of hours, the router stopped responding to any requests. The LEDs stayed on as if nothing had happened, but the router was dropping everything coming from both the WAN and a wired LAN interface. Since than, I had to restart it 3 times during the last 3 days.The firmware is 1.53.0, which seems to be the latest firmware for the European market - even when I try to get a newer firmware, this site only offers the US version 1.02.2.Should I update the firmware to the US version 1.02.2 ? Is there any difference between the 1.53.0 and the 1.02.2 version ? Is there a way to restore the original firmware in case the update fails ? I haven't found any link to 1.53.0 version..Also, does this firmware updating affect my warranty ?
View 9 Replies
View Related
Jun 4, 2012
I've got trouble using PPTP connections with the RV220W small business router.When trying to connect to the router of a branch office with the Windows PPTP client (i.e. on Windows 7) from outside the companies network first everything seems to be in working order (user name and password are checked, the device is registered in the remote subnet) but then a window pops up saying there has been an error connecting.
Here is some information on my setup:RV220W with firmware 1.0.3.5It connects to the Internet using PPPoE dialindyndns account configured and workingAnother router working in "Act as a DSL modem" mode is used as a modem (AVM FRITZ!Box 7170)The RV220W is maintaining a IPSec tunnel to a main office, which is working finethere are 2 local VLANs (one with access to VPN tunnel, one without), each with a own subnet (192.168.201.0/24 and 192.168.202.0/24)PPTP users are on a seperate subnet (192.168.203.101 - 192.168.203.111) My first guess was, that the intermediate router acting as the modem could be a problem, but i verified all settings on that router and it should not filter anything. After all port forwardings, the IPSec tunnel and so on are working.
View 6 Replies
View Related
Jan 23, 2012
i'm having problems connecting to my RV220W using PPTP. The first time I set up PPTP on the box, everything worked just fine. Now, however, PPTP just won't work. No matter how I try to tweak various settings on the router, the connection fails. I have tried connecting with Windows 7, Android and OSX with no success.The router came with version 1.0.1.0, and I have tried downgrading to 1.0.0.26 and upgrading to 1.0.3.5, but alas, I can't seem to make PPTP work again.
View 1 Replies
View Related
May 6, 2012
I am trying to have the RV220W router auto-update the dyndns registration. The dynamic domain that I use is .info -- note the .info domain.
When I manually update the dyndns information (username and password) the registration does go through and the entry is updated on the dyndns site.
However, the registration does not auto-update after that.
View 6 Replies
View Related
Aug 28, 2011
I just upgraded the firmware on the RV220W to 1.0.2.4 and it looks like the time is not updating. I tried a couple of different default time servers and also a custom time server (time4.nrc.ca).
View 2 Replies
View Related
Jul 22, 2011
i have a RV220W and absolutely nothings functional on this stupid Router, no NAT , no Port Forwarding and I cant access my Network from Outside. Any firmware link for downloading. This address works, its handling special webrequest.
View 1 Replies
View Related
Sep 4, 2011
I have a rv082 small business router and the current firmware will not apply. I downloaded the v4.04 firmware update and tried to apply it yet the update does not seem to work. I have downloaded it a second time and used the UPDATE FIRMWARE button to load and apply but no change.
View 1 Replies
View Related
Dec 23, 2011
I noticed one awkward thing with the latest 1.0.3.5 firmware for the Cisco Small Business RV220W router, with previous firmwares there has always been reported 128mb of system memory (RAM) under the router dashboard. And several "teardowns" of this router has confirmed it to have 128mb of memory on the router board.
Does that mean the latest 1.0.3.5 has an odd visual bug, or has the RV220W gotten it's memory sliced in half with this firmware release?
View 4 Replies
View Related
Apr 17, 2012
Every time I try to download a torrent/magnet the router will crash/reboot multiple time (using utorrent 3).
View 5 Replies
View Related
Apr 24, 2012
I have read every post here about port forwarding on the RV220W and none are clear. Here is my scenario.
I have 5 static IP Addresses. I want to use one of the IP addresses to setup remote access using Remote Desktop Connection from outside the office using port address translation. for example i would like to use RDC and a specific port such as 7000 and connect to an internal PC on port 3389. sounds simple. i do this all the time on Cisco ASA's, Netgear, D-link, etc. but for the life of me cannot do it on this cisco firewall. so the port address should look like 25.25.25.25:7000 and connect to 192.168.1.25:3389. i have tried everything based on the posts without luck.
View 1 Replies
View Related
Apr 13, 2012
I have a Cisco rv220w. I just tried updating the firmware. I used RV220W-Firmware-1.0.3.5.img. It rebooted, and now there is no DHCP and no access to anything. I tried the reset button for 10 seconds. That didn't do anything. The WAN and all the LAN lights light up. Power is on and solid. The light blinks alternating between the DMZ and the blank space to the right of wireless. How can I get this back to factory defaults?
View 5 Replies
View Related
Mar 17, 2013
I just bought the SRP541, and it has the old firmware. I downloaded the new firmware, yet I cannot figure out how to install it.
View 3 Replies
View Related
Nov 13, 2012
We need to update the firmware for a small business router WRVS4400N. Unfortunately, I can't even burn the ISO file to CD after downloading it as instructed. I get the following error message: "The selected disk image file Isn't valid." I'm using a Windows 7 Ultimate computer.
I downloaded the proper firmware update for my version V2.0.1.3 router several times, but each time I get the same message.
The main reason we purchased this router for our business for for the extra layer of protection with ProtectLink. It has been over two years now, and we still have not got our ProtectLink service installed because we are unable to install the service until the firmware is updated.
After doing some research online, we found-out that the ISO file needs to be padded to 2 Kb in order to be valid for burning. The ISO firmware file you provide for this update is not according to my calculations. We have no way of converting the file myself and don't know what to do about this situation.
We are extremely taken-back at the fact that I must submit my issue here on a forum rather than address the issue directly to Cisco Support. We are very disappointed with Cisco support as they appear to want to charge additional money just to get an initial shipped-problem remedied. You would think that the company that essential built the internet infrastructure would be more considerate to their customers. We will never purchase another Cisco product given this level of terrible support.
View 1 Replies
View Related
Oct 18, 2011
Do Cisco recommend me running the latest firmware update? Im just an individual who uses it for like a small web-/FTP-/Mail-server, etc. What are the recommendations? Personally I would have updated to the latest...but what are actually the Cisco recommendations?
View 3 Replies
View Related
Oct 2, 2012
We just purchased a new SRP 547W. When logged in with either the default admin or the cisco account there is nowhere to updare the firmware, but the manual says there is such a screen. The manual also mentions a "user list" under the "Administration" tab, but that is nowhere to be found either!
Model: SRP547W, ADSL2+ AnnexA, 802.11n FCC, 4FXS/1FXO Version ID: V02 Hardware Version: 3.1.0 Boot Version: 1.1.19 (Aug 24 2010 - 20:50:42) Firmware Version: 1.02.00 (023) Jan 6 2011 ADSL Firmware Version:0.60.0Recovery Firmware: 1.02.00 (023) Setup Wizard Version: 20101106.00
View 3 Replies
View Related
Mar 30, 2011
When my RV220W used firmware 1.0.0.26 the PPPoE login to AT&T/Bellsouth DSL worked just fine. I upgraded to version 1.0.1.0 and now it won't connect. The PPPoE connection still works from my prior Linksys router so there wasn't a change on the ISP side. Has something changed in firmware 1.0.1.0 that requires a change to the PPPoE profile?
DSL Modem is a Motorola Netopia (model 2210-02) with firmware 7.7.3r10 operating in Bridged mode.
View 26 Replies
View Related
Mar 10, 2013
I have a RV220W running 1.0.1.0. When trying to upgrade to 1.0.4.17 I receive an error: "Upgrade failed due to invalid/corrupted firmware".
I found this article: [URL]
I assume I have to do a factory reset then an upgrade in order to upgrade properly.
If I do a backup running 1.0.1.0, then upgrade to 1.0.4.17, then do a restore, would that put me back to 1.0.1.0? I'm trying to avoid configuring the router manually all over again.
View 1 Replies
View Related
Nov 5, 2012
I have a problem with my RV220W.
It reboots randomly every day and I got the following message in the log: [rv220w] System][FIREWALL] fwPPTPGenericRules.c: inet_aton failed I saw one internet that I can ask cisco for the Beta firmware 1.0.4.6 that fix the issues(Iactually use 1.0.4.17). Is it the solution? How can I obtain the beta firmware?
View 5 Replies
View Related
Mar 27, 2013
it wants me to download something for a bin file, is it safe?
View 1 Replies
View Related
Jan 1, 2013
I was going to update my firmware and the update for F5D8236-2 says it is version 2.01.03. At looking in my router it currently has version 2.01.06 (Jul 2 2009 22:24:38)Which should I be using?
View 1 Replies
View Related
Jan 22, 2012
Linksys WRVS4400N Current Firmware Version: V1.00.16
Tried updating the firmware to either of the two version you seem to have available, but fails with:
"Upgrade file is not the correct type or version for this device. Upgrade failed. Please obtain the correct file and try again."
Tried this one: WRVS4400Nv2_v2.0.2.1.img
And this one: WRVS4400Nv2-fw-2.0.1.3-K9.img
Then spent 2 hours trying to find how to get support for this product. where I may download the correct firmware for this product?
View 2 Replies
View Related
Nov 28, 2012
i tryed to update my rv120w from 1.0.2.6 to 1.0.4.10 after about 15 minutes i power cycled the router.it now has alternating green power and wireless lignts flashing and router is unresponsive.
it does not give out ip address and not reachable when seeting static ip on cpui have tried the reset button.Can this unit be recoverd somehow?
View 2 Replies
View Related
Nov 11, 2012
From an older manual it describes how to configure this. I installed the oldest firmware available for download and this feature is there. Was this just simply moved somewhere else in the newer firmware?
Configuring Port VLANs
You can associate VLANS on the Cisco RV220W to the LAN ports on the device.
By default, all 4 ports belong to VLAN1. You can edit these ports to associate them
[Code].....
View 2 Replies
View Related
Feb 23, 2013
I have done a firmware update at my repeater F5D8233-4. But now I have no access to the webGUI of the repeater. The SSID can be found and I can access the network. But I cannot connect a 2nd repeater now. How can I reset the old firmware?
View 1 Replies
View Related
Dec 27, 2012
The unit was delivered with v1.00.23. The setup utility scanned and found update v1.00.99.
The belkin support site indicates that theer is a version 2.00.04, with no mention of v1.00.99. Which is the correct update to apply?
View 4 Replies
View Related
