Cisco Routers :: Set Up 2 Subnet With Two RV042?
Apr 30, 2012
I'm trying to set up 2 subnet with two RV042 routers. One router will act as a gateway and both WAN ports will be used by two different isp connection. The first router (gateway) LAN IP will be 192.168.0.1/24. I would also like to set up another router behind the gateway with with separate subnet 192.168.1.X/24. And I would like clients on the 192.168.1.x subnet to use the internet through the gateway router and clients on the 192.168.0.x subnet to access resources on the 192.168.1.x subnet. Am I able to do this with two RV042?
View 6 Replies
ADVERTISEMENT
Jul 10, 2012
I have RV042 Router, I'm using only one Internet conection, I'm using IP group like this 192.168.95.x, my DHCP setting use 192.168.95.120 to 192.168.95.240, but in this time I have 245 workstations (may be I will have 25 additionals workstations) and some times I see IP conflict message in my current work stations.
I had read about SUBNET like response about my problem, but I'm not sure about that and how to make subnet with my RV042.
View 7 Replies
View Related
Dec 2, 2012
We connected to locations to the RV042 by setting up 2 Gateway - to - Gateway VPNs - both locations can communicate with the RV042 and devices within the local LAN of the RV042 - however at the moment it is not possible to send traffic from 1st VPN Location to the 2nd VPN location
View 1 Replies
View Related
Aug 24, 2011
I have a RV042 with multiple subnet, 192.168.10.0 and 192.168.9.0. 192.168.10.0 is assigned to the LAN, 192.168.9.0 is created under multiple subnet. Both subnet can access Internet by accessing IP address, but 192.168.9.0 cannot access Internet by using host name. It looks like DNS is not working for the 9.0 network.
View 1 Replies
View Related
Apr 29, 2013
Small office, 2 RV042, 2 DSL connections. 1 is used striclty for the business side, and the other is for our CCTV network. They also have seperate DSL connections as we have 2 external IP address for clients to connect remotely. We don't want to take away our exisring setup, but would like to bridge both networks so a few of our internal clients can connect to our CCTV network and use some of the devices. Right now they come in on VPN but its not as fast.Is this doable without adding additional hardware? Both networks need DHCP enable as well.
Breakdown:
DSL 1
|
RV042
|
192.168.20.X
|| Would like to somehow join the 2 networks together.|
DSL 2
|
RV042
|
192.168.40.X
View 1 Replies
View Related
Sep 27, 2012
I'd like to set each individual LAN port with different address i.e. LAN 1 192.168.1.1 and LAN 2 10.1.1.1 instead of using the multiple subnet feature and having all ports replying for the addresses created.
View 3 Replies
View Related
Aug 24, 2011
I have an RV042 with the PPTP server configured, which is working because I can connect with my iPad and droid phones, however, I'm unable to access resources on the RV042 side (192.168.1.X) when my local network is the same ip scheme (192.168.1.x). It works fine when I'm on a different network like 3G or someone else's Wifi network (192.168.11.X).
View 1 Replies
View Related
Feb 15, 2011
my RV042 is not able to propperly update my ddns. If you try to resolve my dyndns subnet kitus-network.dyndns.org you will get 192.168.0.2. How can I make the router update my ddns with the real public ip rather than the private ip it "sees" on the WAN interface?
View 5 Replies
View Related
Mar 31, 2013
I have 2 questions to confirm and/or get direction on how to modify.
1) is there a way to get around the (seemingly arbitrary) class C (slash 24+) subnet restriction for the primary/main IP address for the internal LAN?
(I realize I can setup multiple internal subnets but that also seems to introduce restrictions for port ‘forwarding’ and ‘one-to-one NAT’ use because those features seem to be restricted to the primary/main IP subnet)
2) it seems like all traffic is passed to the host on the internal side of a ‘One-to-One NAT’ regardeless of the firewall rules in place, is that what is be expected?
View 6 Replies
View Related
Aug 19, 2011
I have an RV042 with the PPTP server configured, which is working because I can connect with my iPad and droid phones, however, I'm unable to access resources on the RV042 side (192.168.1.X) when my local network is the same ip scheme (192.168.1.x). It works fine when I'm on a different network like 3G or someone else's Wifi network (192.168.11.X).
View 1 Replies
View Related
Jan 17, 2011
I would like to the the RV042 for a one to one NAT, but I need it to NAT to an address that is not on it's local subnet. I have it routing properly to the address, but web interface only allows adding an IP on the local subnet. Is there a way around that?
View 1 Replies
View Related
Mar 13, 2012
How to set up a home network with 2 routers, where R1 acts as the DHCP server and R2 is basically a switch, connected LAN to LAN and everything is on the same subnet. Currently I have a different setup:Both routers have the DHCP server enabled and I connect R2's WAN port to R1 LAN. Therefore I have 2 subnets. Now my special requirement is that R2 is a DD-WRT router, which establishes a VPN connection to StrongVPN, so that all internet traffic via R2 is encrypted and goes through the StrongVPN server. Now my question:If I change my router setup to the same subnet, meaning R2 connects LAN to R1 LAN and I disable DHCP server on R2, will R2 still be able to establish the VPN connection?
View 5 Replies
View Related
Jan 24, 2013
I have RV042 and E4200 routers . I tried the manual UPnP port forwarding using Rv042 router and was succesful ( by typing 192.168.1.1 in the explorer and logged in using user name and password )
I am using a linux embedded system whose Internal IP ,Internal port are mapped .This system is connected to one of the LAN ports
I want to try auto UPnP port forwarding both for RV042 router and Linksys E4200 routers
After enabling the Upnp option only and logging out ,Can i add a port mapping entry in this router without logging in using a C++ program which runs on linux embedded system .
View 2 Replies
View Related
Aug 22, 2012
I was looking for a small business router that has VPN support and dual WAN support for load balancing. Upon reading reviews, I think RV042/RV042G is a good choice. Now am thinking if it supports intervlan/ router-on-a-stick configuration?
View 5 Replies
View Related
Nov 12, 2012
I would like to set the subnet mask off the lan to 255.255.240.0 but the selection menu do not allow to do it.
View 8 Replies
View Related
Nov 8, 2012
I'm trying to setup this router with my IP range 192.168.100.1 to 192.168.101.254 but if I try to enter a subnet mask other than 255.255.255.0 I get the error - Invalid subnet mask. It should be 255 for given class of IP address at 255.255.xxx.0.
Every other device on my network allows that subnet mask, why not this router, it's stopping access from my 192.168.101.x devices.
View 5 Replies
View Related
Feb 12, 2012
I'm wanting to use the SRP527W (from Telstra) to route a block of assigned internet addresses (/29) over the WAN internet IP address. Is this possible on the 527W, or does it only do NAT routing?
View 6 Replies
View Related
May 8, 2011
what is subnet mask of 10.2.1.3/22
View 1 Replies
View Related
Jun 29, 2012
I need to print to a printer in with a static IP on a different subnet from a host on a different subnet using DHCP.
View 1 Replies
View Related
Sep 8, 2012
I'm trying to connect two routers and create a subnet but failing due to a little knowledge but no real understanding! I've read the ultimate setup thread loads of times but can't get my setup to work.
Here's the setup I'm trying to build:
Internet -> Master ADSL modem/router (No NAT, no DHCP) -> Slave cable router (NAT, DHCP)
I want to connect 3 Xboxes to the master router with external IPs to avoid the whole "moderate/strict" NAT nightmare. Then I'll connect everything else (PCs, Macs, wireless devices etc) to the Slave router which will assign IP addresses and do the NAT thing. Both routers are Netgear N150s (master is ADSL, slave is Cable).
Here's what I've tried so far:
Master router:
All IP addresses supplied by ISP
Internet IP: xxx.68.160.143
DNS: xxx.xxx.3.xxx and xxx.xxx.6.xxx
Router IP: xxx.68.160.142
[Code].....
View 1 Replies
View Related
Feb 21, 2013
I tried to update our production switch over the weekend with a newer unmanaged Gigabit switch. Everything was fine after the change and the network had a noticeable change in speed.But when I came back in on Monday the Internet was down. So I tried trouble shooting the switch to see if there was a loop or something like that and put it into managed mode so I could look at the config page and take advantage of the STP function. When trying to get to the config page I entered the default IP into my browser and a logon appeared so I tried to login and it failed then I noticed that the title of the browser tab said RVS4000. So out of curiosity I entered the creds for the router and lo and behold it let me in to the router. The router has a static IP and is using a different subnet then the default IP of 192.168.2.1 that the switch has. I have put the old switch back and removed the new one from production but can still get to the router with either IP, it's static address and the 2.1 address.
View 4 Replies
View Related
Jun 26, 2012
I want to use a subnet mask of 255.255.254.0. The setup window doesn't allow me to type in that mask, rather it only allows me to choose from options on a drop down menu (which doesn't include that mask). Is there a way to do this?
View 2 Replies
View Related
Nov 18, 2012
I have 2 sites located 500 meters away and i connect it via 2 x RVS4000. I managed to get the site to site VPN up Via internet and from my network 192.168.1.x able to reach 192.168.2.x. -where 192.168.1.100 (user try to acces my FTP server 192.168.2.99) has no issues but it's slow due to my internet connection speed.
So i setup another link via wireless( wireless bridge ) purpose is to resolve slow connection via internet.
But some how i try to set traffics divertion from 192.168.1.x to 192.168.2.99 via local LAN faild.
how possible to setup the network such as picture attached with RVS4000?
View 3 Replies
View Related
Feb 27, 2013
I have a few questions regarding IPv6.
Question 1.
I have no idea how to route IPv6. My provider has provided me with a subnet. This subnet is for example 1:1:1::/48
The router of the provider is located at 1:1:1::1 and my router should get 1:1:1::2(Cisco router). Every subnet I want to create must be routed by 1:1:1::2, for example if I want to create 1:1:1:1111::/64 it needs to be routerd by 1:1:1::2
How do I configure this on the RV220w?
Question 2.
I have the possibility to create vlans on the RV220W. I can configure IPv4 addressen per vlan. Only for IPv6 this is not possible.How do I configure this or when will new software be released to configure this?Or do I have to edit the configuration file?
View 2 Replies
View Related
Sep 19, 2012
I tried to update our production switch over the weekend with a newer unmanaged Gigabit switch. Everything was fine after the change and the network had a noticeable change in speed. But when I came back in on Monday the Internet was down. So I tried trouble shooting the switch to see if there was a loop or something like that and put it into managed mode so I could look at the config page and take advantage of the STP function. When trying to get to the config page I entered the default IP into my browser and a logon appeared so I tried to login and it failed then I noticed that the title of the browser tab said RVS4000. So out of curiosity I entered the creds for the router and lo and behold it let me in to the router. The router has a static IP and is using a different subnet then the default IP of 192.168.2.1 that the switch has. I have put the old switch back and removed the new one from production but can still get to the router with either IP, it's static address and the 2.1 address.
View 2 Replies
View Related
Jan 15, 2013
we are trying to configure one to one NAT translations on a Cisco 527W-U, but are having some problems. We are running firmware version 1.2.4 (003) on the 527.
The DSL line is assigned with a /29 address range x.x.x.64 /29?
The DSL WAN interface picks up x.x.x.65 /32 from the Radius server. We are using the default private IP address range 192.168.15.0 /24 on the LAN (VLAN1), and can get to the internet ok with a PC connected to the LAN.
However when we try to set up a public IP address in the same range (eg x.x.x.66 /29) on VLAN1 (with x.x.x.67 on the PC) it will not connect. (won't allow us to configure an address from the same range as the WAN on a new VLAN interface).
we would want to be able to do one to one NAT translations eg x.x.x.66 on the outside to 192.168.15.2 inside, x.x.x.67 outside to 192.168.15.3 inside etc, but this will not either. We have tried this on a normal IOS router (887) and it worked ok. We have also tried the same on a small DSL router / modem product similar to the 527 from another manufacturer and it worked ok on that, but we wanted it to be able to work on the 527.
We have tried the NAT bypass feature without any success, reading several other discussion forums on this website leads me to believe that one to one NAT is not supported on this equipment at the moment, or at least not at the current firmware release.
One work around would be to just assign a /32 to the WAN interface on the DSL and route statically to a different routed subnet configured on the LAN, however we were wanting to avoid having to do that if possible.
View 1 Replies
View Related
Sep 12, 2012
I have a RV042 with two ADSL services on it, that is a nice simple thing for this unit. The problem that I am having though is that one of the ADSL services also has a /29 attached to it.
How do you go about configuring this additional sub net? On a previous unit I have had to create IP aliases, and could then port forward and NAT without too many issues, but it doesn't appear that the RV unit seems to work the same way.
View 1 Replies
View Related
Jan 16, 2011
how to subnet a class B IP address?I have a homework, I don't know how to subnet a class B.
View 2 Replies
View Related
Apr 18, 2012
Following instructions on How to add a 2nd router to network.This error will not let me complete and save the definition. Changed 2nd router IP address to 192.168.1.2 static, disabled DHCP, added 1st router IP as default gateway, set subnet mask to same as 1st router. Problem occurs in next frame called 'Network Setup' it is requiring a 'router IP' & subnet mask again and will not accept either the 1st or 2nd router IP address - gives the "IP equals subnet please correct" error or "LAN & WAN IP addresses are identical.
View 11 Replies
View Related
Mar 7, 2012
Two networks. NetA: IP subnetID 10.101.x.x subnet 255.255.0.0. Devices have static-assigned IP's. Only DHCP runs on wireless AP for wireless client connection. IP addressing scheme set by hardware vendor, so not under my control. NetB: IP subnet 10.x.x.x subnet 255.0.0.0. Campus LAN and also not under my control. DHCP supplied addressing. how to get NetA devices to route to NetB?I would like to be able to provide Internet access (via NetB)to NetA devices.
View 7 Replies
View Related
Oct 30, 2012
i cannot access the web managemnet interface of this router from a different subnet.THe WAN interface is a 4G LTE connection,I have disabled both the SPI firewall and NAT and enabled remote management from any ip address but i cannot access the admin web page from a remote subnet.Doing a port scan of the routers WAN or LAN address i cannot see any ports open at all...its as if firewall or NAT is still enabled somehow.
View 0 Replies
View Related
Nov 27, 2012
after recovering from the PPPoE-port-forwarding-fiasco I had with the RV180 (url...), I decided to try again with a Small Business Router from Cisco. This time I took the RV042G, hoping that the higher age of this product comes with a more mature firmware.So far the functions I need, work satisfying. There is only one issue: The subnet-mask is only configurable using a dropdown-menu. I've read the posts from the Cisco-Support staff saying, that this is because it is only a SMB Router. So, we are a small business and we use the 172.20.x.y net for several reasons. One of it is to distinguish and group several network devices using the third block of the IP. Eg. our printers IPs start with 172.20.5.x and so on.
My question is: Is it really impossible to change the subnet-mask dropdown-menu to a simple text-field in the frontend? Because it is possible to change the subnet to whatever one needs by a little cURL-magic: [code] This sets the new subnet-mask permanently (even survives a reboot and is displayed correctly on the system-status page) and I have not discovered any problems.The only thing is, if you change settings on the setup -> network page, the netmask is reset and you have to rerun this script.
View 0 Replies
View Related
Jun 12, 2012
Is there any way to setup an IPSEC tunnel to be able to go from my subnet, 192.168.75.x and be able to reach anything on the other side of the tunnel, 192.168.X.X?
View 5 Replies
View Related
