Cisco :: SNMP Discovery Of Clients Through WLC 2112
Jan 4, 2012
I have a client with a 2112 WLC and 1252AG radios. The clients work fine, but an SNMP management server can not reach any of the clients over the wireless. Before the WLC and new AP's were installed, they were running older Cisco Autonomous AP's and had no problems with SNMP. My monitoring system uses SNMP and it can reach the WLC just fine, so there doesnt appear to be any issues on the switched network. What can be blocking the SNMP on the WLC?
View 4 Replies
ADVERTISEMENT
May 28, 2012
I'm trying to add some 2800 series routers to our monitoring environment, but I can't get them discovered.
On the Mgmt Server I need to go through a "discovery" process to add the 2800 to the system. For this I target the internal interface ( i) but the discovery fails. I'm assuming the packets are getting dropped on the outside interface (e). I know SNMP is set up correctly and works as I had PRTG installed on a local box (p) for testing purposes.
The intention is to do the data gathering via a proxy agent (p), so enableing SNMP on the outside interface is not going to do me any good.What do I need to do to let those discovery packets pass through? At least temporarily?
View 1 Replies
View Related
May 3, 2012
My ASA 5505 has stopped giving out DHCP address to my machines.Everything was working fine and nothing has changed in the network. I've reloaded the firewall and clear all DHCP on the firewall I've even re-entered the cmd on the ASA.
I'm able to staticlly assigned address to the clients and all is way. When I do a DHCP debug on the ASA I don't see any events relating to the DHCP service apart from checking for lease expiry.
I've also tried to plug a machine straight into the ASA and no result. I finally did a packet capture and I am seeing the client machine sending out a DHCP discover packet and nothing else is responding.
My ASA config is:
dhcpd address 192.168.3.10-192.168.3.33 inside
dhcpd dns 8.8.4.4 interface inside
dhcpd option 3 ip 192.168.3.1 interface inside
dhcpd enable inside
View 7 Replies
View Related
Aug 23, 2012
I just got a WAP321 to replace a very frustrating WAP4410, what is the the SNMP OID to obtain associated wireless clients for each of the SSIDs ? I'd be happy with any OID for client numbers so total clients associated will be fine.
View 6 Replies
View Related
Sep 25, 2012
I have a 2112 wlc and 6 1142ap's. I noticed that the 2.4ghz channel is filled with lots of networks but the 5.0ghz area is empty. I tried to manually change the channel but it keeps reverting back to 2.4.
View 11 Replies
View Related
Mar 2, 2012
Airlap 1041n i have air lap 1041n(soft version 12) and wlc 2112 i dont have dhcp server perhaps i use tftpd32 to act as a dhcp server.
my problem is
1. i have configured the wlc 2112 and it's ip is :172.25.1.1
2. i cant configure the air lap 1041n. when i enter the cli mode the following message comes ****continuously***:
Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar 1 01:44:11.310: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
3. my question is how to stop this continuous mgs ?
4. how can i assign an ip to my AP ?
5. how can i join my AP with MY wlc ?
I have to show my office that i can control two ari lap 1041n-k9 with my WLC 2112 and my laptop's wifi and cellphone's wifi are able to get connected with the Access points.
View 1 Replies
View Related
Jan 4, 2012
we are trying to configure WLC 2112 with LAP 1042 but getting following erros on LAP1042. It show the Ap is not supported in controller version 6.0.199.4
*Jan 5 16:52:13.397: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.2.101 peer_port: 5246*Jan 5 16:52:13.398: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.2.101*Jan 5 16:52:13.399: %CAPWAP-
[Code]....
View 1 Replies
View Related
Nov 8, 2012
Do we have enable mod eon 2112 WLC ? Also if we need to access WAP from WLC how can we telnet or ssh?
View 5 Replies
View Related
May 10, 2012
My company has a lot of thier business relying on the wireless network and I am trying to reduce the single points of failulre in my network infrastructure. We have a single Cisco 2112 controller with 10 AP's that I am wondering if it's possible to cluster this with another controller for redundancy purposes?
View 3 Replies
View Related
May 16, 2013
I have a Mesh architecture with 2112 WLC and 1042 APs I want just to know if I can connect one 1310 AP to the ethernet port of a mesh 1042 AP with ethernet bridging enabled.
View 4 Replies
View Related
Jan 2, 2012
I am having a trouble with using iTunes, iPhones and iPads on our Wireless LAN. We have the 2112 WLC and 10 1142N WAPs. If I do a network scan, I can see the Apple TV and see that port 5353 is open, which is Apple's Bonjour service. However, if I try to play music/video in iTunes, or on an iPhone/iPad, I do not see the Airplay icon. If I plug into the LAN, the Airplay icon appears immediately. I have created an allow all rule in the ACL but still no dice.
View 26 Replies
View Related
Mar 11, 2012
I have 8 no. AIR-LAP1131AG-A-K9 and WLC 2112 Wireless LAN Controller,i configured the device and its working at deffent SSIDs but when i am trying to enable same SSID on all LAP it shows "AP on dupplicate SSID found and Layer 2 security found".
View 1 Replies
View Related
Feb 8, 2011
I am having a problem using my Windows IAS radius server to validate management users for my 2112 Wireless Lan Controller.I have defined the radius server and it works ok with the policy for validating wireless clients but not for WLC management users.The Remote access policy seems to be set up correctly as the event viewer on the server shows:-
Event Type: InformationEvent Source: IASEvent Category: NoneEvent ID: 1Date: 09/02/2011Time: 11:06:06User: N/AComputer: UK01DC07Description:User xxxxxx was granted access. Fully-Qualified-User-Name = TRAVEL.OAG.com/Dunstable Admins/xxxxxx NAS-IP-Address = 10.10.45.210 NAS-Identifier = UK03NM01 Client-Friendly-Name = UK03NM01 Client-IP-Address = 10.10.45.210 Calling-Station-Identifier = <not present> NAS-Port-Type = <not present> NAS-Port = <not present> Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = <undetermined> Policy-Name = UK03NM01 - login Authentication-Type = PAP EAP-Type = <undetermined>
....
But, the WLC log shows:
*Feb 09 11:06:06.612: %EMWEB-1-LOGIN_FAILED: ews_auth.c:2104 Login failed. User:xxxxxx. Service-Type is not present or it doesn't allow READ/WRITE permission..
The WLC just returns the login screen
View 7 Replies
View Related
Mar 21, 2012
We recently purchased a 2112 WLC, running version 6.0.199.4. I have everything running through a single port on the controller, which is connected to a trunk port on our 3750 stack. Our management VLAN is vlan 40, and AP is plugged into another port on the same switch which is an access port in vlan 40. APs appear in the controller ok, receive an IP address, but we aren't able to connect to any of the WLANs and periodically the APs will disassociate with the following messages: [code] I'm not sure if that's related to why we can't connect to the WLANs or not...
Another wrinkle is that if we plug in the AP directly to one of the PoE ports on the controller, it all works perfectly. I'm guessing its something switch-related since the only difference is that we're not going through the switch when it works.
View 27 Replies
View Related
Jan 18, 2010
I've read some opinions that lowering the RTS threshold can facilitate in some noisy wireless environments. I have found how this can be done on standalone APs but cant seem to implement the change on a WLC 2112. How to do it.
View 3 Replies
View Related
Oct 16, 2011
how to configure the backup port for the management interface for a WLC 2112. I see in the documentation that it states:
"Each interface is mapped to at least one primary port, and some interfaces (management and dynamic) can be mapped to an optional secondary (or backup) port. If the primary port for an interface fails, the interface automatically moves to the backup port. In addition, multiple interfaces can be mapped to a single controller port."
But nowhere can I find where it says how exactly to do it. Google seaches have come up empty as well. I am connecting the WLC to a 3750 stack, and would like to have a secondary port from the WLC connected to the second node of the 3750 stack. So far I have connected port 1 (management) of the WLC to a port on node 1 of the stack which is configured as a trunk and everything is workign fine. I have also connected port 2 from the WLC to a port on node 2 in the stack that is configured the same as the port on node one. how to tell the WLC to use port 2 as the management backup if needed.
[URL]
View 2 Replies
View Related
Dec 16, 2012
We are having a 2112 WLC and LAP1042 access points and facing a client disconnection issue. Also signal strength is varying even when client is at steady position. We have a single SSID structure and clients are connecting through 802.1x authentication with WPA2. Access points are joined in H-REAP mode. We also tried by creating a new SSID with open authentication and even on that SSID signal stregnth is varying and client is getting limited connectivity. Attached are the debugs for a particular client and the show tech support for WLC.
View 5 Replies
View Related
May 22, 2013
I have one cisco wlc 2112 with ios 7.0.230.0 with license to support 12 access points. My access points are nine (9) lap1231ag and one (1) lap1310.I just have one wlan (ssid). My scenario of deployment is in layer 3. I have one interface management and ap manager in the WLC. All my Access Points have differents ip address that WLC. I need to configure a unique ssid to associate my six (6) dynamics interfaces (each dymanic interface with different vlan subnet).Each wlan profile (ssid) should have the same security in phase 2 (wpa2/psk). My cisco access points don't support hreap. My wlc support only (4) interface into an interface group, and i need six (6) dynamics interfaces.
View 6 Replies
View Related
Jun 18, 2012
I have a ASA5505 and it has a vpn set up. The VPN user connects using the Cisco VPN client. They can connect fine (the get an ip address from the ASA), but they can't ping the asa or any clients on the network. Here is the running config:
Result of the command: "show running-config"
: Saved
:
ASA Version 7.2(4)
!
hostname ASA
domain-name default.domain.invalid
[code].....
what I need to add to get the vpn client to be able to ping the router and clients?
View 3 Replies
View Related
Nov 5, 2012
We currently have an ASA 5520 communicating with 10 ASA 5510's, all on static outside addresses. I was asked to add 5 additional 5510's on dynamic address. All worked well in testing until it was decided that some of the dynamic clients needed to talk to each other.
My testing shows packets just dying in the 5520.
View 1 Replies
View Related
Feb 1, 2011
I have 4 desktops cat5 to Dlink DIR 615 router. All work fine. Any wireless clients, laptop or netbooks, see the desktop computers for a while then disconnect somehow. All machines can see the Internet through the router at all times. The desktops disappear from the laptop/netbooks but the wireless machines can be seen from the desktop computers but clicking on them gets 'Access Denied' message after a wait.3 desktops = XP, 1 98SE. All laptop/netbooks = XP
View 2 Replies
View Related
Jul 6, 2012
I have a Netgear WNDR4500 running the stock firmware, acting as a router for my home. I also have 2 routers that are flashed with DD-WRT (Linksys WRT54G and Asus WL-520GU) running as client bridges. The Netgear is 192.168.1.1 and the other 2 client bridges are 192.168.1.2 and 192.168.10.3. The Netgear router is performing DHCP giving addresses from 192.168.10.100 to 192.168.10.254. I have numerous machines connected to the Netgear, wirelessly and wired, and numerous machines wired to each client bridge. All machines have IP addresses that are 192.168.10.100, 192.168.10.101, 192.168.10.102, etc... Everything is working fine, but I have one question: When I access the Netgear router, it shows the client bridges as clients, machines that are wired and wireless to the Netgear router are listed as clients, but the client list does not show any clients that are connected to the client bridges. I assumed that since the router is performing DHCP that all clients would show up.
View 2 Replies
View Related
Jan 15, 2012
I am having trouble getting 1142 LAP to find the controller. We are running an ASA 5505 at our main campus where the 5508 is located. Each Of our distribution centers have a PIX501 and from there about 3-5 AP's each. The AP's that were primmed before instalation work great, however we need the ability to get the other ones that were already installed and not finding controller to work with out cycling them through main campus. I have opened up UDP ports 12222-12223 and 5246-5246 with no luck.
View 1 Replies
View Related
Nov 29, 2011
we're evaulating the Cisco SM 4.2. After adding my ASA 5520 the Policies are discovered from the device except the RA VPN Policies.I tried to trigger the discovery process manually and i got this errormessage Please verify the device "IP address", "hostname", "domain name" and "port number" are correct, there is network connectivity between the CS Manager server and the device, and the device is configured to accept https connections, the device is running, and then retry this operation.which i don't understand because the other policies were retrieved just fine.
View 0 Replies
View Related
Feb 16, 2012
I have a problem discovering some ASA firewalls on a network. I have several ASA firewalls on this /24 network, but some of them I can't discover e.g 149.x.x.107 is discovered ok, but 149.x.x.20 I can't discover. It seems that it's not even trying to discover the devices I have problems with. Nothing is shown in the discovery log.
View 11 Replies
View Related
Jul 12, 2012
LMS 4.2, W2K8 R2.I was having an issue with discovery adding devices to with corrupt information (seemingly random strings of characters in several fields). While I was trying to clean this up a scheduled discovery kicked off and further exacerbated the issues I was having. Frustrated, I deleted all entries from the discovery schedule until I could get things cleaned up.
Now I want to go back and troubleshoot the discovery process. Trouble is, I can't get discovery to do anything anymore. I disabled all modules but CDP. I added a single seed IP address under the CDP configuration. This is the address of a 3560V2 switch that is not in DCR. When I started discovery it completed in about 2 seconds and didn't discover anything, including the seed device. So I added another 3560V2 as a seed device under global settings. Same results. Thinking that it had been working using scheduled discovery, I set up a schedule and kicked it off that way. Same results. Finally I added one of these seed devices to DCR and let LMS fully learn about it. Ran another discovery. Still no joy.
I started an SNMP debug on the seed devices before starting discovery. I see the SNMP get coming from LMS, the switches respond and the discovery completes with 0 devices discovered.CS Discovery.log contains no meaningful information. Only messages about "No appenders could be found for logger".
View 1 Replies
View Related
Dec 4, 2011
my customer is using Cisco Prime 4.1 as an Upgrade from LMS 4.0 and has made a discovery of a new added Cat 4506E with a Sup 7E and Modules.All the devices have been discovered, excepted the module WS-X4712-SFP+E.Is this card not supported yet ?I could not find any detailled and actual information about the support or not of this module, or about the conditions for the Module support it in Prime 4.1..How ist it possible to proceed to having this module discovered ?
View 1 Replies
View Related
May 30, 2011
We have just installed LMS 4.0.1 and started to discover parts of the network. After the discovery process finished successfully - 100+ new devices were added to DCR message - I was able to see the devices by clicking on their number but when I go to Inventory-Add/Import/Manage Devices I cannot see any device in the Group that I created.If I restart the CiscoWorks Daemon Manager process the newly discovered devices are added to the custom Group. This seems like a bug as I had a LMS 4.0 evaluation installation a few months ago and device discovery was working fine meaning the devices were added immediately to the Inventory.
View 4 Replies
View Related
Jul 30, 2011
i am installing a CWLMS 4.0 and everything was good until i have reached the discovery for the devices, i am dealing with a bank setup and the branches is connected using layer 3 MPLS, branches are located behind the ISP router, so as a cdp neighbor i cant see anything but the ISP router at my Core.
so i cant see the branches routers as neighbors to my (seed Device) Core, and i have tried to use the ping sweep and i could not reach them also. and also to add them manually as we were doing before in the earlier versions of CWLMS, using the Devices and Credintials, this option is removed from the LMS 4.0 as i have red in a document.
1- snmp is configured on all devices.
2- access-list is configured on all devices.
3- i am able to reach the LAN Devices without any problems and the configuration is the same on all of the devices.
View 1 Replies
View Related
Jan 18, 2012
We are running CiscoPrime LMS 4.1 and I have a problem with PingSweep in Device Discovery. Our company's branches connect to the main site through GETVPN. Discovery through CDP, Routing Table and ARP cannot be used based on the document written by Joseph Clarke [URL] and which is extremely useful. So the only available option is PingSweep.
The loopback interfaces of all the remote GETVPN devices are in the same IP range, so this was configured in Module Settings --> Ping Sweep in the Discovery.
Unfortunately none of the devices get discovered, even though there is icmp connectivity from the server to the loopbacks.
View 1 Replies
View Related
Aug 30, 2011
I am using lms 3.2.where I have added devices manually.Because discovery settings the device are taking some random ip updating the display and hostname.
I want to disable the full discovery settings..
View 3 Replies
View Related
Sep 8, 2011
I am using CISCO PRIME LMS 4.1 for manage my network, i ran a device discovery job using a ping sweep on the ip ranges of my network, ie 192.168.1.0/24, 192.168.2.0/24 and so on... the discovery found all my devices, but it discovered duplicate devices with illegal ip Addresses, i.e.,
ip device
192.168.1.255 S1
192.168.2.0 S1
192.168.2.1 S1 (the real address)
all in reachable status.
I don't understand why the program adds that repeated illegal addresses.. How can I run the device discovery to avoid this problem?
View 2 Replies
View Related
Feb 4, 2011
my system's network discovery is always off even when i try to put it on again it goes back off immediately...can it be related to the firewall settings or wat else can be preventing it from coming on?
View 3 Replies
View Related
