Cisco Security :: ASA 5505 - Disk0 Error (No Such File Or Directory)
Jul 19, 2011
I recently had some trouble with my ASA 5505 in that the running config would not be saved after a reboot. Definitely looked like a hardware problem with the flash memory. I have since bought a new flash memory card and copied the contents of the old card to the new card. 1st problem I have is that I can see the image on the new card, but for some reason it wont boot into that image. I get /file not found
I then successfully load a new image to the device and it boots successfully. I then follow it with a
Cisco asa# config t
Cisco(config)# boot system disk0:/asa831-k8.bin
(to ensure it boots from the flash in the future) and I get
WARNING: BOOT variable added, but unable to find disk0:/asa831-k8.bin
I have since tried
ciscoasa# fsck disk0:
Unsupported file system type!
%Error checking disk0: (No such file or directory)
When ever I try to do anything with Disk0: i get the same error. (No such file or directory). I have also tried putting the old flash card in the ASA and I now get the same response.
View 11 Replies
ADVERTISEMENT
Jan 3, 2013
my Cisco ASA 5510 doesn't save the configuration to the disk.
View 1 Replies
View Related
Nov 16, 2012
[OK] webvpn
webvpn
[ERROR] anyconnect image disk0:/anyconnect-win-3.0.08057-k9.pkg 2
copying 'disk0:/anyconnect-win-3.0.08057-k9.pkg' to a temporary ramfs file failed
Trying to add the windows anyconnect to the list of usable software for clients and that error happened. What is going wrong? I assume I dont have enough RAM...
View 1 Replies
View Related
Jan 2, 2011
I'm working on implementing a RADIUS authentication for wireless access with the following :
- PCs running Windows 7, protocol used is PEAP (without validating the server certificate to make it simple at first),
- AP 1252 configured to use a RADIUS server to authenticate (it's working good with an ACS server 4.2),
- ACS Server 5.1.0.44.5 running as VM connected to an AD domain and working good with VPN connections,
- AD domain running on Windows 2003 Server.
My ACS VM is working good since a couple of months for VPN (RADIUS) and administration (TACACS) remote access, both using Active Directory. Now, I'd like to use it to authenticate people connecting to a 1252 Cisco access point but I'm getting this error "24427 Access to Active Directory failed". I switched from PEAP to LEAP but this is the same.
All I can get running the expert troubleshoot
Investigating failure code: 24427 Access to Active Directory failedChecking if Active Directory is configuredActive Directory is configuredAttempting connection to Active DirectoryConnection to Active Directory was successful.Troubleshooting completed.Click on Show Results Summary to view results.
I followed this guide, at least for the ACS certificate section :
[URL]
View 27 Replies
View Related
May 16, 2012
i need to know if i can integrate Single Sign On to my Cisco VPN Client v.5 with my Active Directory which run on windows 2008
View 2 Replies
View Related
Oct 7, 2012
I have Cisco 2800 series router. When I am trying to write memory getting error message " Error opening flash:config-backup-1 (No more root directory entries available)" When there is simultaneous access to a router's NVRAM, we might encounter these errors. In order to clear the line the other user(s) is (are) connected on and free the NVRAM, issue the clear line command. But still getting the same error message.
View 1 Replies
View Related
Jul 26, 2011
I'm trying to install Active Directory Agent in Windows 2003 (not R2) to configure Identity Firewall with ASA 5505 8.4.(2). The installation runs ok but the agent doesn't start because the WatchDogService.exe fails. I don't find any information about AD_Agent.
View 5 Replies
View Related
Nov 9, 2011
I'm trying to get a couple clients to talk to my Active Directory servers. I've created sub-interfaces on my ASA. So, my clients are on Gi0/1.139 and my two Active Directory servers are on Gi0/1.132. I've enabled traffic on TCP 53-5000 port range according to Microsoft. My clients still can't join the domain. What ports I need to open up? My AD servers are Windows 2003.
View 1 Replies
View Related
Apr 5, 2013
Can we integrate cisco acs verison 5.x with active directory Microsoft windows server 2012 ?
View 1 Replies
View Related
Oct 16, 2012
IPsec VPN configured between ASA5525-X and Linksys RV042 ,While transfering some exe from ASA5525-X side to Linksys RV042 side over VPN hash-sum of this file changes, so, when you open transferred file, you have an error message "File is corrupted". If you try to transfer file from Linksys side, hash-sum is ok. Also, work with oracle application is interrupted because of unknown reason. IPsec works only if using router instead of ASA.
View 2 Replies
View Related
Nov 29, 2012
Cisco VG224 (R527x) processor (revision 4.1) with 119808K/11264K bytes of memory. Processor board ID FGL150411MN, R527x CPU at 225MHz, Implementation 40, Rev 3.1, 1 On-Board Twenty-Four FXS Analog Voice Module V2.1, 2 FastEthernet interfaces, DRAM configuration is 64 bits wide with parity disabled. 63K bytes of non-volatile configuration memory. System fpga version is 250027, % Crashinfo may not be recovered at flash:crashinfo, % This file system device reports an error.
View 4 Replies
View Related
Jan 31, 2012
I continue to export a Certificate Signing Request for our local CA. They insist they are getting a parsing error (Invalid algorithm specified) when they cut and past or import the file I send them. In fact, they have stated that they have had this error with another Linux-based CSR.
I'm not find this issue prevalent on the Internet, so I wonder is this if a user issue on their behalf or the fact that they are using a Win2003 box as a local CA.
How to get a Cisco ACS ".pem" file signed in a local Win2003 CA or advise to an alternative to configuring 802.1x using EAP-TLS?
View 3 Replies
View Related
Aug 16, 2012
when load MIB file have error unable to load the MIB file Error: can't find RFC1155-SMI.I can not find RFC1155-SMI.my Where I can find or download RFC1155-SMI.my.
View 5 Replies
View Related
May 24, 2011
I have a ASA 5505 that I test with which originally came with the Security Plus license. I recently erased flash and loaded the latest asa841-k8.bin version of IOS along with asdm-642.bin. Everything booted fine and came up as it does when freshly wiped however I noticed that i was now only running a base license. If I issue the sh activiation-key command, I noticed the following messages (full output is at the bottom):
The Running Activation Key is not valid, using default setting
......
This platform has a Base license.
......
Failed to retrieve flash permanent activation key
Did I somehow kill my Security Plus licensing when I did the erase flash? If so how do I recover it?
ciscoasa# sh activation-key
Serial Number: JMXXXXXXHU
Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
The Running Activation Key is not valid, using default settings:
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
[code]...
This platform has a Base license.Failed to retrieve flash permanent activation key.The flash permanent activation key is the SAME as the running permanent key.
View 2 Replies
View Related
Jan 9, 2013
My bootvar is set to boot up images from disk0. The 6500 series switch has two redundant supervisors.Each supervisor has a PCMCIA card with the exact same IOS images in the 0 slot. The secondary supervisor is given the disk name slavedisk0 and the primary is simply disk0
View 2 Replies
View Related
Aug 14, 2011
Whenever I tried to do backup of CiscoWorks from GUI, I am receiving a error message"Backup failed. ERROR(292): C:PROGRA~1CSCOpx/backup.LOCK file exists, look into the log file C:/PROGRA~1/XCSCOpx/log/dbbackup.log for more details". backup.LOCK file size is 0KB.I am using LMS 3.2; RME 4.3.0;CM 5.2.0
View 1 Replies
View Related
Feb 1, 2012
I deleted the flash from an ASA5510. I was able to tftp a version back into the device, but cannot seem to correctly have the box boot from this flash. I get the following error:
!WARNING: BOOT variable added, but not a valid image disk0: /asa831-k8.bin
*** Output from config line 41,"boot system disk0:/asa83..."
I have tried every save syntax i can think of to save this flash, but have yet to have it boot with an image ( I keep booting into ROMMON and have to tftp the image back in)
View 5 Replies
View Related
Jul 15, 2007
I want to put the asa5520 to the factory default please let me know how to do that. how to remove the configuration file from it.
View 5 Replies
View Related
May 26, 2012
Customer is using SUP720 with SP rommon image version 8.1(3), he is trying to boot the new ios image from disk0, but he gets invalid magic error. he fomat the disk0 but still he gets error when he boots from disk0. He suspect that it can't be flash problem but can be software of hardware as he has two flash with same issue on 2 switches.
Customer wanted to recreate, I tried in the lab, i was able to load from disk0, but sup in lab had 8.5(4).
Customer wanted me try with 8.1(3) version. But i was unable to downgrade the SP Rommon image. SP rommon is running in Gold region and I loaded the 8.1(3) from both disk0 and sup-bootdisk, even preferrence was given to region1 but still sup came up with gold region itself.
* Will i be able to downgrade from 8.5(4) to 8.1(3), if so, what are the steps.
* is there any limitation or bug where 8.1(3) will be unable to read disk0.
View 4 Replies
View Related
Apr 16, 2012
I am trying to configure redundancy with SSO and I need to get the same IOS on both supervisors. My issue is that I get an error when I try to copy the IOS from either the sup-bootdisk or the disk0 to the slavesupbootdisk. The Error is Invalid argument.
I have tried also to tftp to the slavesupbootdisk and get the same result.
View 5 Replies
View Related
Jun 14, 2012
One CF in one of ASA had died from active/standby failover cluster few days ago.
So all works perfectly.
But now I have:
asa-5520/act# sh fail
Failover On
Failover unit Secondary
[Code].....
Or I can make on current secondary command: failover lan primary And boot up another ASA with config from secondary?
View 3 Replies
View Related
Mar 19, 2013
I bought belkin N150 recently. I tried to configure with my ISP. They are surprised how I don't have DHCP option in the wifi configuration and asked me to upgrade my firmware. When I tried to upgrade. I downloaded the firmware from [URL] tried to upgrade. It is showing file format error.
View 2 Replies
View Related
Jan 16, 2013
copy or move into local area network? If any software to check which PC or Workstation or Users or IP to do this.
View 2 Replies
View Related
Feb 14, 2012
how to export objects (net and security) from an ASA 5500 firewall to a .csv file?
View 1 Replies
View Related
Jul 18, 2010
I'm trying to configure the NAC Profiler with a 3310 CAS Collector. In the "Edit Collector" menú, it shows all the modules as "Running", except for the NetWatch module which shows a state "Invalid configuration file (missingInternalAddress)".
I configured the eth3 interface of the CAS as a monitor interface in the Profiler (see attached image), and I tested that the SPANed traffic actually reaches that interface from the access switch. I'm using software version 3.1.0_24 in both the Profiler and the Collector.
View 2 Replies
View Related
Jan 2, 2012
I have the BEFSR81 V2 and every day at least one of the ports become inactive and the router has to be unplugged and plugged back in to reset the ports. I was going to upgrade the firmware from version 2.44.2 to the one on the site 2.45.10 but when it is downloading I get a message at the end upgrade file pattern error. There is a problem with the router that the ports go out or will the firmware update hopefully correct that issue and how to I get the firmware to update
View 2 Replies
View Related
Jun 17, 2012
I've been trying to configure this Cisco ASA 5505 for days now. I used to be able to use the ASDM gui application, but i've since transitioned into using the CLI. Trying to go back to ASDM, it won't let me get back in, and when i try show asdm image, it says Device Manager image file not set. I have no CD for this device and I need that image file for the ASDM. How can I locate the file and install it on the router so I can use it?
View 2 Replies
View Related
Aug 20, 2012
I can't seem to figure out which one I should go for. I'm thinking Kaspersky would have greater security but I'm not familiar with AVG's server level security.I don't need all the bells and whistles such as file encryption or password storage. I'm simply after a really strong AV for the server. Another one is VIPRE although I've heard it can take a while to configure it unlike Kaspersky which is pretty straight forward.
View 1 Replies
View Related
Nov 28, 2010
My asa5505 frequency restart and create a crash-infor file.
View 3 Replies
View Related
Apr 24, 2013
I have a Cisco ASA 5505 with the base License. I want to split my network and add a new Internet Access, the first network in Orange works fine. My question is how can i access the file server from the second network (192.168.X.0 /24) ? The 3 switches are Cisco SF300-24P.
View 7 Replies
View Related
Feb 5, 2013
I still get the "security key mismatch error" for my school and home wifi. I know the passwords i'm using are correct.I also have the fake "Intel(R) Centrino(R) Wireless-N 6150" in my Device Manager. This does not have a driver nor can Device Manager find one.I recently noticed that there are 8 Virtual Wifi Miniport Adapters. What are these and why do they exist?
View 5 Replies
View Related
Apr 27, 2011
I am using ASA 5505 with firmware 8.2(2). My ISP uses PPPoE as a WAN connection protocol. There is a problem with getting PPPoE session started on my ASA 5505. The debug output says that after negotiation of PPP-authentication protocol ASA receives a PADT packet from ISP’s concentrator. To get more information I captured all packets on outside interface with WireShark. Packet-dumps (in .pcap format) are attached in this post. I have tried all possible combinations of PAP/CHAP/MSCHAP values in “vpdn group MYGROUP ppp authentication” command. If you take a look at the packet-dumps you can see, that in case of “PAP” – ISP’s concentrator rejects negotiation (PAP is not supported by my ISP). In case of CHAP/MSCHAP (that ARE supported by my ISP) – ASA acknowledges the using of MSCHAP v.2 PPP-auth protocol, which is actually not supported by it…
Judging by MAC-addresses of ISP’s concentrators it is visible that Cisco’s equipment also is used.
The questions is: Why ASA acknowledges using of unsupported ppp-auth protocol during negotiation and what I need to do to resolve this issue? (ISP’s support says, that they cannot change PPP-auth protocol negotiation order. Also they says that I need to contact with manufacturer of my equipment).
View 3 Replies
View Related
May 18, 2011
i just deployed Cisco NAC version 4.8.1 Virtual Gateway OOB on a LAN envieronment and on a WLAN envieronment, it works fine for some users , they can authenticate via the agent or web page, and then they are redirected to the access vlan, But for some other users in LAN and WLAN , when they try to authenticate via agent or web page the following error appears:
Invalid switch configuration-OOB Error:OOB client "mac/ip" not found.
I tried to find some pattern for the users but it dont match any pattern.
View 14 Replies
View Related
