Cisco WAN :: 2800 / Error Opening Flash - Config-backup-1 (No More Root Directory Entries Available)
Oct 7, 2012
I have Cisco 2800 series router. When I am trying to write memory getting error message " Error opening flash:config-backup-1 (No more root directory entries available)" When there is simultaneous access to a router's NVRAM, we might encounter these errors. In order to clear the line the other user(s) is (are) connected on and free the NVRAM, issue the clear line command. But still getting the same error message.
View 1 Replies
ADVERTISEMENT
Apr 4, 2011
This is troubling and I don't know why it is happening. For some odd reason files seemingly related to my DIR-655 are being put in the root directory of my hard drive on my Power Mac G5 running Leopard 10.5.8. Two preference files and a folder named ''D-Link'' and another folder named ''Shareport.''Why is this happening? I have given D-Link/DIR-655 no access to my hard drive.Furthermore, why this is only happening on that machine while my MacBook Pro running Snow Leopard 10.6.7 is not being ''invaded.''
View 12 Replies
View Related
Jul 7, 2011
How do I save/copy all of the router configuration entries onto a memory/flash usb drive? I did not configure the router myself (out of town when purchased). I have already downloaded the manual for that router and I want to understand exactly what she (person who configured router) did and identify any mistakes she might have made. Once downloaded, I assume I can print out all configuration settings.
View 3 Replies
View Related
Mar 24, 2011
1. Do all the 2800 series have a rocker power switch on the rear?
2. Do all 2800 automatically power on when power is connected if the rocker is in the on position?
3. Is it possible to physically damage the flash card in a 2800 router if it was powered off during a write operation?
The story is I have a client who claims that the flash card was damaged due to a power off.
View 2 Replies
View Related
Jun 10, 2012
Can I use Sandisk Compact 4GB Flash card on Cisco 2800 series Routers
View 8 Replies
View Related
Jan 10, 2011
i have Router 2800 series we are using leased line Connection 8 Pubilc IP.One IP Config in Router FE0/0 IP 101.102.148.91 and FE0/1 192.168.0.0 Local IP.I have 6 Web Server. How to Config other 7 IP address on Web server in the router 2800 series.
View 6 Replies
View Related
Oct 16, 2011
I currently admin a WAN link between two international sites. I have a 2800 at each end. The primary connection between the two sites is 20MB Ethernet PIP MPLS BGP circuit. I also have a pair of T1's in a PPP multilink that I switch over to in the event the primary circuit goes down. I currently am doing the switch over manually. It takes me about 15 minutes to complete it, but I know there must be a way to make this an automatic process.
So a couple questions:
1) Is there a way to create an "enhanced multilink" with the 2 T1's and the Ethernet circuit in the same bundle, in effect giving me 23MBps bandwidth while still being able to maintain connectivity if one of the 3 links goes down? This is my preferred solution
and if 1 is not possible then
2) Is there a way to configure the router so if the Ethernet circuit goes down, all traffic will be automatically directed over the T1's, and then come back to the Ethernet when it's back online?
View 5 Replies
View Related
Sep 13, 2011
I need to implement the backup between two sites I have router 2800 which is having a point to point connectivity with the far end.At the far end there is no router ,only one firewall is there on that firewall one access-list is there to allow the traffic .To implement the back up link i have created a site to site vpn .But the problem is as soon as the tunnel is establised .For the time being i have removed by site to site config from both firewall.
View 7 Replies
View Related
May 3, 2011
We have a few WAN connecting sites to ISP using BGP. we are looking at getting backup link for 1 site.
We have decide to use an IP WAN ADS L link. we will have 877 and 2800 for each link. from understanding, we have a static routing on IPWAN service. means when both BGP WAN and IP WAN connected to the ISP. ISP will use ADSL as primary ignore the BGP link. so other sites will see a BGP route coming from ISP via the ADSL link for this location.
So we have find a manuel solution, leave ADSL unplugged of power but setup same LAN ip address and connect the cable towards the core switch. when WAN link fail, switch on ADSL. So the static route will advertise to the rest of sites.
just want to know is there any auto solution can disable the ADSL link/ ppp link when the 2800/WAN route is up. and enable the ADSL port when the WAN is down. not sure if HSRP/backup interface/tracking will work? and how?
site office switch - > 2800 - > ISP - > ADSL -> ISP
(need this link to be backup and protocol down, so the ISP will not able to connect to this link and advertise as next hop)
View 5 Replies
View Related
Sep 27, 2011
I have a 2801 running c2801-spservicesk9-mz.124-3g.bin According to the Cisco IOS MIB locator the image supports OLD-CISCO-SYSTEM-MIB I have tried .1.3.6.1.4.1.9.2.1.55 etc to set server IP address and the filename string but without any luck.e.g.
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: iso.3.6.1.4.1.9.2.1.55.a.b.c.d (where a.b.c.d is the server IP)
I have also tried the method similar to that for Cat 3550 switches where you create a table of entries to define the transfer paramaters then activate the transfer (I think the CISCO-CONFIG-COPY-MIB)
e.g.
[URL]
C:>snmpset -v 1 -c private <device name> ccCopyProtocol.<random number> integer 1 ! 1 = tftpccCopySourceFileType.<Random number> integer 1 ! 1 = networkFileccCopyDestFileType.<Random number> integer 3 ! 3 = startup & 4 = runningccCopyServerAddress.<Random number> ipaddress "<server ip address>"ccCopyFileName. <Random number> octetstring "<file name>"ccCopyEntryRowStatus.<Random number> integer 4 ! 4 = createAndGo, or 1 = Active
To write net have the source as running (4) and the dest as network (1)
ccCopySourceFileType.<Random number> integer 4
ccCopyDestFileType.<Random number> integer 1
Clean up at the end - destroy .14 with the value of 6.
example output : -
-- earlier output omitted --
Error in packet.
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: iso.3.6.1.4.1.9.9.96.1.1.1.1.4.111
Error in packet.
[code]...
View 4 Replies
View Related
Aug 1, 2011
Site A, site B, site C, site D is connected using leased line each other. We are using Cisco 1800, 2800 and 2900. Each site also have Internet connection using ADSL connected to firewall, we are using pix 501 and ASA 5510.My question is, can i use the existing ADSL line to be use as a backup line if the leased line is down on any of the site??And i want it to trigger itself, once the leased line is down, the firewall UP the backup line? something like that..
View 1 Replies
View Related
Nov 15, 2011
I just read the Removing and Installing CompactFlash Memory Cards in Cisco 2800 Series Routers instructions and there was nothing said regading powering down the router. Are these CompactFlash cards hot swappable??
View 2 Replies
View Related
May 21, 2012
We are currently running Cisco prime 4.1 and want to make sure there is a backup of the configurations from our switches and routers. The VLANconfig is not collected according to the devicestatus dashboard. i am aware there were a known issue with LMS running on a virtual server and vlan not being able to be collected, is this issue resolved? i have tried the various workarounds with TAC support and it hasnt worked. We have the running and startup config collected for our devices when looking at the device status dashboard. does this mean if a switch crashes we can restore the config to a new switch immediately?
i saw there is a version 4.2. maybe this version resolves the issue with LMS on a virutal server? i cannot find the download to upgrade to 4.2 in the support section though.
View 1 Replies
View Related
Nov 6, 2011
In my WCS v7.0.172.0, I recently configured the Controller Configuration Backup task. Backups seem to be working fine for the past few days. How do I tell it how far back I want to keep logs, or how many log files to keep before deleting the older ones? Seems like it will just keep on saving the config backups with a date stamp until the TFTP server runs out of disk space.
View 3 Replies
View Related
Jan 29, 2012
I was configuring route tracking at a client with several sites to route across GRE tunnels and being able to detect a failure of the main site. To my surprise when configuring a 2800 series router (after sucessfully configuring a 1800 series on the same infrastructure), a 2821 with IOS 12.4(24)T2 IPbase, the commands for ip sla object tracking don't show up.The feature navigator says the router supports this, but it just won't take the commands (also tried older versions of the commands such as "ip sla monitor.." and "rtr .." to no avail).
View 5 Replies
View Related
Jul 27, 2011
I m unable to take backup of Switch c2960 using
#Copy flash: tftp
while i m taking it show some error
t#copy flash: tftp:
Source filename []? c2960-lanbasek9-mz.122-44.SE6
Address or name of remote host []? 10.23.120.15
Destination file name [c2960-lanbasek9-mz.122-44.SE6]?
%Error reading flash:c2960-lanbasek9-mz.122-44.SE6(Is a directory)
sh flash:
Directory of flash:/
2 -rwx 1919 Mar 1 1993 10:27:17 +05:30 private-config.text
3 -rwx 11056 Mar 1 1993 10:27:17 +05:30 config.text
4 -rwx 804 Mar 1 1993 05:30:42 +05:30 vlan.dat
6 -rwx 2072 Mar 1 1993 10:27:17 +05:30 multiple-fs
7 drwx 192 Mar 1 1993 05:37:02 +05:30 c2960-lanbasek9-mz.122-44.
SE6
View 1 Replies
View Related
May 3, 2013
We have a problem with a Cisco 1400 Bridge. This equipment can not bridge to the other root or not root mode. I can see a message "Interface Dot11Radio0 Radio transmit power out of range" and the MAC Address of Dot11Radio0 appears with 0000.0000.0000.I set the local power to 18 but the MAC Address is still in 0000.0000.0000.
View 1 Replies
View Related
Oct 18, 2011
i got the problem with 1300 bridges,root bridge with omni antenna and non root with sector antenna , it can associate and can pin each other , but whenever i try to browse several web pages its get timed out and radio was down.
View 5 Replies
View Related
Jul 18, 2011
Any working configuration between two BR1310's in Root/Non-root mode? The documentation is vary vague and i can't find anything more secure than WEP. Is it possible to use WPA with radius authentication?
View 1 Replies
View Related
Aug 7, 2011
I've configured WCCP2 on my ASR1002/ESP2 and works fine. But got error log since I changed redirect ACL entries. Check on Cisco seems it a known bug?[URL] And seems any change on WCCP not take affected anymore. Even I removed all WCCP configure on my router, but my cache engine still got the redirected packet!?
Aug 8 22:41:00 CST: %FMFP-3-OBJ_DWNLD_TO_CPP_FAILED: F0: fman_fp_image: Batch type 6 ID 0 download to CPP failed
Aug 8 22:41:30 CST: %FMFP-3-OBJ_DWNLD_TO_CPP_FAILED: F0: fman_fp_image: Batch type 6 ID 0 download to CPP failed
Aug 8 22:42:00 CST: %FMFP-3-OBJ_DWNLD_TO_CPP_FAILED: F0: fman_fp_image: Batch type 6 ID 0 download to CPP failed
Aug 8 22:42:30 CST: %FMFP-3-OBJ_DWNLD_TO_CPP_FAILED: F0: fman_fp_image: Batch type 6 ID 0 download to CPP failed
[code]....
View 1 Replies
View Related
Jun 3, 2012
I'm replacing an older (& failing) RVS4000 v1 with a new V2. I need to minimize downtime. Will a config backup from the old v1 restore properly to a new v2 (all have newest firmware)? There are a lot of tweaks including several VPNs and to do it all manually is not desirable.
View 2 Replies
View Related
Dec 21, 2011
I need to backup my ASA 5505 configuration and restore it to default, then I'll configure manually the new config, but if something doesn't work I want to restore the backup made before.
I tried the "copy run tftp" command, and it always answers the same: Result of the command: "copy run tftp" [code] I read everywhere its supossed to prompt asking me tftp server address and file name.
View 7 Replies
View Related
May 24, 2012
I have a Cisco 831 router (c831-k9o3y6-mz.124-5c.bin) that cannot backup the config to a local tftp server. I have seen this behavior on a few different Cisco devices over the years and have never found a solution. The connection is made to the tftp server (in this case tftpd but similar behavior on any tftp server) and a blank file is created on the target machine file system, but the data is never transferred.
The router shows %Error opening tftp://192.168.0.2/router-confg (Timed out) [Failed]
The tftpd log shows 5 repeated attempts at the file write.
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:40.922]
Write request for file <router-confg>. Mode octet [25/05 11:56:40.922]
Using local port 61607 [25/05 11:56:40.922]
<router-confg>: rcvd 0 blk, 0 bytes in 3 s. 0 blk resent [25/05 11:56:43.922]
Connection received from 192.168.0.1 on port 53570 [25/05 11:56:43.923]
[Code]...
This is also stopping me upgrading the image on the router as I cannot transfer in the other direction either.
View 1 Replies
View Related
Apr 9, 2013
I have a small doubt with Nexus 7k,5K,2k & 1K.We want to backup the running config to my desktop through tftp.When i tried to backup from Nexus switches showing like below Nexus 7K. [code]
It's showing two choices which one I have to follow "copy running-config startup-config" or "copy running-config startup-config Vdc-all". [code]
It's showing two choices which one I have to follow "copy running-config startup-config" or "copy running-config startup-config fabric"
It's showing three choices which one I have to follow "copy running-config startup-config" or "copy running-config startup-config fabric" or "copy running-config startup-config vdc-all". [code]
View 11 Replies
View Related
Mar 6, 2013
I have problem with ACS 5.0 on reporting. On "Monitoring and Report" page in Faverite Reports when i clicking on "Authentications - RADIUS - Today", My browser displays error "Error while reading skin-access.config. Please make sure the file exists and conforms to the schema specified"
I must also mention that I never upgraded the version of ACS from 5.0 also from command line all the acs services are running. It is running on CISCO 1120 Secure Access Controll Server apliance.
My second question is can I upgrade the version of ACS to 5.4 with Cisco Secure ACS 5 Base License?
View 4 Replies
View Related
Dec 6, 2012
I am receiving this error after connecting a copper adapter on a GBIC blade in a 6509. Here are the results from the show Interface. I am waiting to confirm the device on the other side settings but as far as I see I get UP and Up for protocol and line respectively.
GigabitEthernet2/11 is up, line protocol is up (connected)
Hardware is C6k 1000Mb 802.3, address is 0009.11e4.f3ce (bia 0009.11e4.f3ce)
Description: RCPBSDEV
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
[code]....
View 3 Replies
View Related
Sep 2, 2011
webpages not opening and showing some error
View 1 Replies
View Related
May 21, 2012
How can we restore ACS config from an existing backup file, in an ACS cluster deployment? is it through CLI? with"restore"or"acs restore" command? and should I restore only the ACS config or both ACS and ADE-OS config?
View 4 Replies
View Related
Oct 20, 2011
have some problems with setting up jobs for the backup running config on my switches. Have RW and RO contact with everyone and can change the config in editor, but do not get config.txt
View 1 Replies
View Related
Aug 2, 2009
I need some info on how to open an RV042 config backup (.exp) file. I recently had an RV042 that got very wet and it is now dead, and I do not have another on hand. BUT I do have the config Backup that includes the user MAC authentication list that I really need. Is there a way to get this information other than loading into another RV042.
View 4 Replies
View Related
Aug 25, 2012
I am trying to create a backup of my 2620 router so I can use for GNS3.
I have only configured the IP address on my FastEthernet port. Having many issues with no connection to my pc, finally I found that you must enable the interface 'no shutdown'. Now I have a valid connection
I have made no other configurations on this router, everything else is default.
I can successfully PING from both ends
**PROBLEM: My problem is that when trying to 'copy flash' to my TFTP server, the response is**
".....
%Error opening tftp://192.168.1.3/c2600-advsecurityk9-mz.124-1a.bin (Timed out)
Router"
Is there another setting I should enable? Remember I have made no other configurations bar the ones above.
View 1 Replies
View Related
Mar 15, 2012
how can i take backup of startup config to tftp server through tftpd server.I am using 4506e switch
View 2 Replies
View Related
Jul 19, 2011
I recently had some trouble with my ASA 5505 in that the running config would not be saved after a reboot. Definitely looked like a hardware problem with the flash memory. I have since bought a new flash memory card and copied the contents of the old card to the new card. 1st problem I have is that I can see the image on the new card, but for some reason it wont boot into that image. I get /file not found
I then successfully load a new image to the device and it boots successfully. I then follow it with a
Cisco asa# config t
Cisco(config)# boot system disk0:/asa831-k8.bin
(to ensure it boots from the flash in the future) and I get
WARNING: BOOT variable added, but unable to find disk0:/asa831-k8.bin
I have since tried
ciscoasa# fsck disk0:
Unsupported file system type!
%Error checking disk0: (No such file or directory)
When ever I try to do anything with Disk0: i get the same error. (No such file or directory). I have also tried putting the old flash card in the ASA and I now get the same response.
View 11 Replies
View Related
