Cisco Switches :: Cannot Get PC To Connect To SF100
Oct 16, 2011
I recently purchased a SF 100D 5 port switch. I currently have a New dell PC connected through a wall jack to an existing router, and wanted to add an ethernet printer. When I connect everything to the switch, I can only get a link light on the printer (Not the PC or router). I did connect to the router with a tempory cable across the room, and did get a link light, but it will not work through the wall jack, which the PC does connect to the existing router through the wall jack. Also, I cannot get the PC to connect to the SF100, I tried using the same cable, that did work on the printer.
View 1 Replies
ADVERTISEMENT
Jul 26, 2012
Simple question, does the SF100-24 switch come with the brackets to rack mount it on a standard 19" rack?
View 1 Replies
View Related
Oct 6, 2012
To setup SG300-20 as CORE switch and SF100-48 as Distribution switch.SG300-20 will have 2 VLAN(DATA and VOICE)
-192.168.14.1/24 DATA
-172.168.0.1/24 VOICE
SF100-48 will also have 2 VLAN(DATA and VOICE)
-192.168.14.1/24 Desktop/Laptops
-172.168.0.1/24 IP phones
Problem is when I tried to assign IP to any VLAN's the switch will just hang and loose my connection the light will stop blinking it will steady and i unable to access the switch until i turn off again?
View 1 Replies
View Related
Mar 27, 2013
I have a stack of 6 switches and I want to add another over the gbit connector using fiber. I already connected but I can acces the network from the new switch. I don't have any issues on my Stack all resources are available Do I need to do some special setup or connection to enable this? Can be stacked like the others? I already usen the 2 stacking port can i Add another switch?
View 3 Replies
View Related
Apr 23, 2011
how to connect two subnets with two switches and one router using router sim software?
View 1 Replies
View Related
Oct 23, 2011
I have 3 2960g switches that each have about 40 devices (pc's, printers, etc..) attached to them. Each of these 2960 switches has one port connected to a port on a "core" switch, which is a 3950g. The 3950 has 3 switches and all of our servers (12) conected to it's ports. The network seems to be running alright, however most, if not all, of the port lights on ALL switches blink wildly(at least I consider it "wildly"). Am I doing this wrong? Is there a better way to connect all these switches?Also, this configuration is for our first floor. The second floor has the exact same configuration, and the two 3950's (one upstairs, one downstairs) arec connected via fiber.
View 2 Replies
View Related
Aug 10, 2011
ossible to connect a pair of switch serving the same segment (active/passive) into 1 switch?
View 6 Replies
View Related
Sep 10, 2012
I am trying to portforward so I can host a server of a game I play, but whenever I try to connect to my default gateway it just times out and cannot load.I have done the cmd -> ipconfig/all and I found that my default is 192.168.0.1What do I do
View 6 Replies
View Related
Aug 24, 2011
What is it called when you use two cables to connect two switches together.
View 1 Replies
View Related
Dec 10, 2011
I bought 3 switches (gs 300-28 ports)and i need to connect them to my network, when all the switches are cisco 3560g, with vtp on the vlans.my question is, how to creat vlans on this switch? and Is it possible to make the gs300 learn the vlans on the 3560g?if he dosent has the vtp client?
View 1 Replies
View Related
Sep 27, 2010
a customer purchased a ESW-520-24p to be used in a VoIP project. Today we had difficulties connecting it to a Catalyst 3650G switch; We've tried setting the port to trunk, general, customer and access and changed all sorts of VLAN settings on the 3560G switch to no avail: the switches just wont interconnect. While sniffing we saw that ARP requests are even not answered, so something is wrong on a low level, probably with VLAN-ing.if these switches should be able to be interconnected and if yes, what needs to be done to do so?
Secondly; voice will be on seperate VLAN and the client will use SPA942 phones, which have an internal switch that allows to connect a PC to it. I've used this phoned successfully with Catalyst Express switches and I didn't have to do anything for VLAN-ing, this worked "out of the box". Can these phones work with the Small Business switches as well?
View 4 Replies
View Related
May 20, 2013
We have problems with MGBSX1 when connect to SG500X switches , need configuration adittional ?? or only plug and play ?
The SFP-10G-LRM= is compatible for connect between WS-C2960S-24TD-L with SG500X ??
View 1 Replies
View Related
Jan 9, 2013
I have an issue with the Cisco SG200-50p and almost all of the POE ports on the switch.
We had an issue with the UPS in the server rack yesterday where the UPS failed and turned off all power to the equipment in the rack. It is possible that something was blown in the UPS itself. I was able to reroute power to all devices but the only one that seems to have an issue is the SG200-50p switch. After the power was restored the unit refuses to acknowledge all the IP phones plugged into the POE ports. Running a copper test via the web interface on the majority of the POE ports are listed as Operational Status: Down.
I have tested the affected ports with Laptops, other switches, and simple loop test to verify that the port operational status after a coper test goes back to 'Up' when any of these devices are connected to the those ports. However it fails to recognize when one of the IP phones are connected at all. There are not even any lights on the device for those ports and the status is listed as 'Down' when I plug in any of the IP phones. The IP phone is a Linksys IP Phone SPA922. I know the phones are good because when I connect them through another POE switch they come on and function properly.
View 4 Replies
View Related
Nov 30, 2011
I recently moved out of state and have been working remotely. I just got a new internet provider who will not let me connect to my office VPN without a small business account which is ridiculous. I've been reading up on how to work around this and haven't been able to figure anything out. I've signed up for a dynDNS account but the truth is I have zero experience with this and don't know what I'm doing - most of the stuff I'm reading is a foreign language to me. I can log into my router and change settings and I can get VPN info from my tech person and work so I just need to know what to do. I can't really work effectively without access to my network but I refuse to pay for a small business account
View 5 Replies
View Related
Jan 26, 2011
I'm trying to access 192.168.0.1 to configure my linksys router to add new hardware to my home network but my browser (Safari) can not open the page - error message suggests 'server where this page is located isn't responding.
View 3 Replies
View Related
Jan 27, 2011
with a networking issue that I'm having with the 2nd computer I have trying to connect to the interntet via my Westell 7500 DSL router. I ran the diagnostic tool on the NIC to make sure it working correctly and it is, and so is the cable according the tools; I also verified that myself via unplugging/plugging the cable into the router and it detects eachMy other 2 computers work fine via the router.Here is the ipconfig info;Host Name:XXXXXXPrimary Dns Suffix: (blank)Node Type: HybridIP Routing Enabled: NoWINS Proxy Enabled: NoEthernet Adapter Local Area Connection:Connection-specific DNS suffix: (blank)Description: Intel(R) 82562V-2 10/100 Network ConnectionPhysical Address: 00-1D-09-8D-34-3BDHCP Enabled: Yes
View 3 Replies
View Related
Jan 18, 2011
First , I have installed the router and modem correctly , and i connected it to the switch , So the other devices connected to the internet but not connected to the workgroup so i can't share the files between the PC's ? Modem >>> Router >>> Switch >>> PC's
View 1 Replies
View Related
Feb 25, 2011
I have two dvr 4 channel each and I need to connect them to just one static IP, is that possible?
View 1 Replies
View Related
Apr 20, 2011
i was trying connecting two LAN network on different location.
View 2 Replies
View Related
Mar 21, 2011
I have a Belkin Wireless G Plus MIMO Router and had no problems connecting to corporate in the past until several months ago. I can connect just fine if I bypass the router and connect to the modem. I also have no problem if I go to places like Subway. There is no problem with the wireless internet connection, only a problem when I try to connect to corporate through the VPN.
View 3 Replies
View Related
Sep 3, 2011
When I moved in with my new husband, we kept his internet provider, but I wanted to use my new wireless router with his modem. I can connect to the internet straight from the modem on both our PC and my laptop, and can connect to the wireless router (excellent strength). When I connect the modem to the router, however, the internet connection is lost. For some reason (I never had this issue with my old modem) I can not get the two to communicate with each other. I have tried resetting my router to factory default, and shutting everything down and going through the manuals step by step. I can not get the USB connection to work with the modem (driver won't install/can't be found on the disk) and both the modem and my laptop only have one connecting port for the Ethernet cable, so currently I can't connect the router to the modem and my modem to the computer at the same time.
View 1 Replies
View Related
Nov 13, 2011
How do I connect a wireless router to my computer wirelessly?
View 3 Replies
View Related
Mar 8, 2012
I have 4 computers on LAN using a router and I cannot see eachother, don't know how to configure the PCs. The router is set on DHCP for LAN, the PCs are using Windows 7 and can connect through the internet the router is providing (4 dells) but don't know how to set the computers to see eachother and to share files.
View 2 Replies
View Related
Sep 16, 2012
Can conect to the internet but unable to connect to 192.168.0.1
View 4 Replies
View Related
Mar 6, 2011
I am trying to extend range of my DIR-615 with a DAP-1360. Part of the installation requires pulling up 192.168.0.50 on my brouser. But it won't pull up.
View 1 Replies
View Related
Jan 17, 2013
i have configured my network like below:
I have three lan ports in my server the IP is:
(1) IP: 10.10.10.2 SUBNET: 255.255.255.224
(2) IP: 10.10.10.34 SUBNET: 255.255.255.224
(3) IP: 10.10.10.69 SUBNET: 255.255.255.224
I have given IP as mentioned below to 1 to 30 pc connected in First Switch.
IP Starts From : 10.10.10.5 To IP : 10.10.10.30
Subnet Mask: 255.255.255.224
Gateway: 10.10.10.2
For 31 to 50 Pc in Second Switch
IP Starts From : 10.10.10.40 To IP : 10.10.10.65
Subnet Mask: 255.255.255.224
Gateway: 10.10.10.34
IP Starts From : 10.10.10.74 To IP : 10.10.10.85
Subnet Mask: 255.255.255.224
Gateway: 10.10.10.69
Pc are connected internally in separate switch. but can not connect all three switches & with server. Only Gateway 10.10.10.69 is connected with server.
View 4 Replies
View Related
Jul 19, 2011
I'm unable to connect to the router IP in my address bar as stated above and I don't know what to do to find out what the issue is. I've looked in many topics in the tech support but couldn't find a fix. I run my internet on this computer with an ethernet cable plugged into the wall.
View 6 Replies
View Related
Dec 26, 2011
I'm having trouble trying to connect 3 computers via LAN for gaming using straight Ethernet cables and a net gear router. Only 2 computers seem to connect at a time. All 3 can connect to one another (one at a time) and the I.P. addresses have been set to 192.168.0.1 , 192.168.0.2 and 192.168.0.3. The cables work fine and the computers, but I'm wondering if I'm using the wrong kind of hub/router?
View 3 Replies
View Related
Jul 25, 2011
In win 7, I do not find a terminal emulation program, how can i connect to CLI of Cisco 300 series switch through its console.
View 2 Replies
View Related
Oct 6, 2011
I am unable to connect to webview on our SRW2024 switch. I use a macpro G5 running 10.6.8. When i try to connect to it through Safari, Chrome, or Firefox using 192.168.1.254, I receive a message that a connection cannot be established. 192.168.1.254 is the ip mentioned in the manual. I used an ip scanner and it showed the actual ip is 192.168.0.1. But I cannot connect to webview through this ip either. We got this switch a year ago and did not change any settings, we just connected it and it worked fine. But now we want to change some settings on the switch but cannot connect.
View 1 Replies
View Related
Jul 21, 2012
I have two cabinets in a datacenter with four available cross connect cables. I would like to set up two LAGs between the two switches each of which will carry one vlan across to the other. My default vlan contains all of my servers on it (10.0.0.0/8), and my backup vlan (192.168.200.0/24) will only be used for iscsi traffic and data backups. At the moment, I have one cable connecting the two switches and it works fine for the default vlan. When I add in a second cable and set it to vlan 200, no matter what settings I try it just doesn't pass traffic. I've made several attempts to get the second connection working, tagged, untagged, trunk, access, etc.
View 13 Replies
View Related
Apr 10, 2013
Trying to connect 2 switches together (both 2960G 8 ports). I have an SFP in each (GLC-LH-SM). They are connecting over SingleMode Fibre using the correct cabling. The fibre cores have been tested and are all ok also.
I can't get no Layer 1 connectivitiy at all. Just dead. I have tried 4 different GBICS, swapped cabled etc.. I have forced the media type to use SFP. No link light....
I thought it would just be a case of plugging in the gbics cables and off I go! I read about forcing the speed and duplex on the port but because the port if SFP, the speed and duplex settings are not available. This seems to be hard coded.
View 3 Replies
View Related
Mar 2, 2012
We have a stack of 2960S, and have a new client that wants to connect via diverse fibre to both switches(From 2 switches on there side). We currently run MST and client is (currently) running PVRST. The 2 links will be trunks (With the same ~5 vlans running over both)
Our "standard" trunk config is:
switchport trunk allowed vlan 228,229,265-268
switchport mode trunk
mls qos trust dscp
storm-control broadcast level 20.00
storm-control action trap
no cdp enable
spanning-tree bpdufilter enable
spanning-tree guard root
So after recommendations on what is needed to avoid L2 loop, and to ensure we force one trunk port to be the "primary" for those vlans, and the the other trunk port to be "backup"?
View 6 Replies
View Related
