Cisco Switching/Routing :: SRP547 Does Not Seem To Have Proper 802.1Q Support

Jan 19, 2013

I am looking for a router to route between VLANs on a Cisco Small Business 300 Series 10-port Gigabit Managed Switch.The router needs to support 802.1Q and also have Gigabit ports.I have been looking at the Cisco small business RV series of routers but most of these seem like Wireless routers and I don't know if these will act as proper routers.I already have a Cisco SRP547 and this does not seem to have proper 802.1Q support.

View 12 Replies

Cisco Switching/Routing :: Configure Nexus 5596 To Support Proper QoS For EF At The Core?

Feb 23, 2012

I am deploying a pair of Nexus 5596's with 3750 POE switches in the closets. I'm looking for a best practice as how to configure the Nexus 5596 to support proper QoS for EF at the core.

View 6 Replies View Related

Cisco Switching/Routing :: Proper Cabling For 2 3750-x Switch Stack

Mar 26, 2012

I have been looking at the Cisco Hardware docs and I can't find anything on the proper way to setup a 2 switch stack for Stackwise redundancy and Stackpower redundancy. Everything details 3 or more switches.

View 2 Replies View Related

Cisco Switching/Routing :: Managing Proper VLAN Configuration To 3750 Switch

Mar 6, 2013

I have a 2911 router connected to a 3750 switch. I have configured vlan interfaces on the 2911 router:I am using the vlan 89 (89.2) as the management ip address for me to remotely get to the switch. Is this a proper configuration or could this cause issues in the future.

View 4 Replies View Related

Cisco Routers :: VOIP Configuration - SRP547

Feb 6, 2012

I am unable to get any configuration parameters to work on my SRP547 for VOIP. ADSL2 works fine. Equipment replaces a ya.com (Arcadyan ARV4518PW) which worked ine albeit with significantly less features. Problems encountered due to the lack of equivalents for some parameters and an overabundance in the new unit which simply don't exist in the Arcadyan product.

View 7 Replies View Related

Cisco Routers :: SRP547 Enter Both IP Settings And Username / Password On WAN Configuration Page

Aug 22, 2011

I'm moving from an 1801W to an SRP547.My adsl supplier (BT) has given me a username and password, and also a router IP address, a subnet and an gateway IP address. I have 13 fixed IP addresses. I don't speak cisco, so I'm using the built in interface to configure it.If i choose IPoA I can enter the IP settings. If I choose PPPoA I can enter the username and password.I do not see anyway I can enter both the IP settings and the username + password on the WAN configuration page.

View 9 Replies View Related

Cisco Switching/Routing :: Nexus 7010 / VSS - Does It Support Virtual Switching?

Apr 9, 2010

Does the nexus 7010 support virtual switching yet? All of the posts I have found from about a year ago say that it is going to be supported, but there were no dates listed. I heard the same thing from Cisco a while back, but haven't followed up with it.If it is supported finally are there any configuration guides available for it?

View 7 Replies View Related

Cisco Switching/Routing :: Does Catalyst 3550 Support Inter Vlan Routing

Jul 24, 2007

Does Catalyst 3550 switch support inter vlan routing ?

View 12 Replies View Related

Cisco Switching/Routing :: Nexus 5010 Support For Inter VLan Routing

Jan 10, 2012

Can nexus 5010 supports inter v lan routing , as there is no core switch and router available in current network.

View 2 Replies View Related

Cisco Switching/Routing :: 2960 Switch Support IP Routing?

Nov 16, 2011

Does the Model "WS-C2960-24PC-L" Supports IP Routing or not?

View 9 Replies View Related

Cisco Switching/Routing :: Does 877 Support Vlan

Jan 28, 2012

Coincidentally when i tried to configure router 877 as an adsl router i found that a vlan configuration is included. my question is what is the benefit of using vlans in router ??? i studied that we use it in switches for the purpose of network enhancment from broadcasts and netwrok segmentation. why we use vlans in routers ?

View 9 Replies View Related

Cisco Switching/Routing :: Does 4500 Support VSS?

Feb 28, 2012

Does the 4500 support VSS (Virtual Switching System) ? On the official product overview page it says: 1.6 Terabits capacity with Virtual Switching System (hardware-ready)What means Hardware ready ? Does it mean that it supports VSS in the same manner as the 6500 ? The reason I'm asking this question is that I didn't find any info on the Internet about this. We would like to upgrade our network by interconnecting the 2 sites with Layer 2 redundant links (Layer 2 extension), but I'd like to use the both links in a load-balancing manner, which can be a real pain in the *** with STP. The choice is between 4500 and 3750 stackable core switches. The 6500s are very expensive.

View 6 Replies View Related

Cisco Switching/Routing :: Does 887 Support SIP Forwarding

Mar 26, 2013

Does this Router Support SIP Forwarding?

View 1 Replies View Related

Cisco Switching/Routing :: VSS Support On Cat 4500x

May 23, 2012

when the VSS will be supported on Catalyst Supervisor Engine 7-E or 7-LE and on Catalyst 4500-X?And does VSS will require Enterprise license ? or the IP base will be enaugh?

View 7 Replies View Related

Cisco Switching/Routing :: 3560G - PBR Support

Feb 2, 2012

I have a 3560G switch with c3560-advipservicesk9-mz.122-46.SE and 2 routers. The switch has vlans defined. I want to route all traffic on vlan 25 out of one of the routers exclusively. Here is what I have attempted:

-Set the SDM template to routing & reload
-Define an access-list for the v lan traffic
-Define the route-map
-Apply the route-map to the vlan interface

When I attempt the last step I receive the following syslog error:

%PLATFORM_PBR-3-UNSUPPORTED_RMAP: Route-map RM_IMDGuest not supported for Policy-Based Routing

Also, the route-map is removed from the vlan interface after this error is thrown. Im 99% confident that PBR is supported on this switch (am I wrong?). Here is the relevant show output:...

access-list 125 permit ip 192.168.25.0 0.0.0.255 any
route-map RM_IMDGuest permit 10
match ip address 125
set ip next-hop 192.168.5.3
[code]....

View 2 Replies View Related

Cisco Switching/Routing :: ME 3400 - VTP Support

Sep 13, 2010

We purchased ME 3400 switch and trying to implement it. But its quite surprising in the ME3400 configuration guide that the switch does not support VTP. When I checked in Feature navigator under feature "VTP" i could see ME3400 supports VTP. But when i get into CLI of ME3400, i am not getting any option of configuring VTP. I could see in some sites VMPS is supported in ME3400.

I would like to confirm the following:
1. Does VTP support present in ME3400 or not? If not, what would be the reason that it is not included in ME3400.
2. If not what is the alternative.

Network is already running VTP of around 30 switches.

View 3 Replies View Related

Cisco Switching/Routing :: FCoE Support On Nexus 7k

Feb 24, 2013

Its required that all ports on nexus 7k should be user configurable as either 1G/10G/FcoE. Which module do i need in this case ?

View 0 Replies View Related

Cisco Switching/Routing :: Catalyst 3560 With GRE Support

Feb 7, 2012

Does the Catalyst 3560 support GRE ?

I know that Catalyst 3750X support GRE ,but Catalyst 3750X cannot work in hardware it.

Does the Catalyst 3560 cannot work in hardware too?

View 4 Replies View Related

Cisco Switching/Routing :: SG200-50 - Does It Have Support For SNMP?

Jul 4, 2012

Does Cisco SG200-50 50 port gigabit smart switch have support for SNMP ? I have updated the firmware and still can not find any option for snmp.Sent from Cisco Technical Support iPad App.

View 3 Replies View Related

Cisco Switching/Routing :: Does WS-C3750X-24S-S Support GLBP

Dec 28, 2011

I would like to ask you that switch WS-C3750x-24S-S can support with GLBP?i have IOS version : S375xvk9t-12258SE.

View 2 Replies View Related

Cisco Switching/Routing :: IOS For Support Of OSPF And BGP In 6509-E

Sep 13, 2012

If i look at the Feature Navigator , it says that IP Base Supports OSPF and EIGRP. But if i look at the Cisco Link it contradicts the Cisco Feature Navigator.

[URL]

if I have 6509-E with VSS-SUP720-10G and want to run OSPF and BGP on the Switch. What is the IOS i require? WIll IP Base Suffice or i need to take Advance or Enterprise Image.

View 1 Replies View Related

Cisco Switching/Routing :: Does LAN Base IOS Support SSO In L2 4507?

Apr 26, 2012

We will deploy several 4507 with 2xsup7 as a L2 access switches for our office.Does LAN_Base IOS version support SSO or we need purchase IP_Base IOS (L3)?

View 1 Replies View Related

Cisco Switching/Routing :: 3560X Or 3750X Support GRE?

May 23, 2013

If the 3560 or 3750 "X" series support GRE.I am pretty certain the older 3750-E does not support GRE (both in hardware and software)Was hoping the new super duper X series do. If not, it could get expensive

View 5 Replies View Related

Cisco Switching/Routing :: ME3600 Does Not Support Rstp

Apr 24, 2013

i have some ME-3600x. some of version 12.2 and one of version 15.5. te last one hast same config as all other. but if i check for rstp it sends.i know abount global config commands:

-spanning-tree mode rapid-pvst
-spanning-tree extend system-id

but there is no spanning-tree support. this causes many more problems. so it is important to solve spanning tee at first.is it possible without downgrading this device?

View 3 Replies View Related

Cisco Switching/Routing :: Does 3750 Support New ASN Format

Sep 17, 2012

I have a 3750 running 12.2(55) and when I configure BGP I only get the standard AS number choice of 1-65535, but my provider is supplying a 4-byte AS number which is six digits and it gets rejected at the prompt on the 3750. Does that mean no support on 3750

View 1 Replies View Related

Cisco Switching/Routing :: Can RPS2300 Support 2960S

Aug 18, 2012

When using dynamic configuration tools, if I choose 2960 (not 2960s), I have the option to choose RPS2300 as redundant power, but when I choose 2960s, I cannot choose RPS2300. However, in a document describe both 2960 and 2960s, it said that RPS2300 can be used. Does RPS2300 support 2960S?

View 1 Replies View Related

Cisco Switching/Routing :: Switch WS-C3524-XL Support 802.1x?

Mar 15, 2012

The switch ws-c3524-XL with c3500xl-c3h2s-mz.120-5.WC17.bin not support the command dot1x?

I ask that because i´m unable to write this command: aaa authentication dot1x default group radius

And enable 802.1X authentication on the interface with this command: dot1x port-control auto

View 1 Replies View Related

Cisco Switching/Routing :: Does WS-X4748-RJ45-E Support The 802.1x

Nov 10, 2011

this module WS-X4748-RJ45-E able to support 802.1x?

View 1 Replies View Related

Cisco Switching/Routing :: HWIC-4T1/E1 Support On A 2811?

Oct 31, 2010

[URL]The Cisco 2811 does not support the HWIC-4T1/E1 module. But, I installed HWIC-4T1/E1 on the 2811 running 124-24.T2.

View 3 Replies View Related

Cisco Switching/Routing :: C7200 IOS Does Not Support CBWFQ

Jul 6, 2012

I have a C7200 router which does not support full feature CBWFQ. There are no option to configure following commands:

class-map match-any voice
match protocol rtp
match ip dscp ef

[Code].....

View 1 Replies View Related

Cisco Switching/Routing :: 5500 ARP Entries And Support For VMs?

Jul 15, 2012

How many VMs can a pair of 5548s support? Remember, for each VM, I will have an ARP entry in the 5500 ARP Table (assume 5500 is the L3 default gateway).

View 3 Replies View Related

Cisco Switching/Routing :: Does 819HG Have WiFi 802.11 B/g/n Support

Oct 14, 2012

does Cisco 819HG have WiFi 802.11 b/g/n support?In overview ther is sentence "The Cisco 819 ISR supports 3G, 4G, and 3G with dual radio 802.11n Wi-Fi form factors combined with full features of Cisco IOS Software.", but there is no words about WiFi in datasheet.

[URL]