Cisco Switching/Routing :: 6506E With SUP 720 Support 10 GIG Module?
May 4, 2013switch 6506 E with supp 720 does it support 10 GIG module ?
View 3 Replies
ADVERTISEMENT
Cisco Switching/Routing :: 6509-E - IOS Support For Module
Mar 4, 2012I have a switch Cisco WS-C6509-E WS-X6716-10G-3C module ( module for 10 GB) , i have the IOS s72033-ipservicesk9-mz.122-18.SXF9.bin. I want to know if this IOS can support this module or not ? or , if i must do a upgrade , is that the IOS : "s72033-ipservicesk9_wan-mz.122-33.SXH8" work fine ?
View 7 Replies View RelatedCisco Switching/Routing :: SFP-GE-T Module Support On Nexus 5548?
Jan 7, 2013I am trying to install SFP-GE-T module on Nexus 5548UP Switch, but is giving the ‘SFP validation Failed’ error. The details of the switch is given below
Model : N5K-C5548UP-FA
The interface is configured with speed 1000 before inserting the module, still we are getting the same error. PFA logs for more details We have 8 Nos of SFP-GE-T modules , all are giving same error. We tried to insert the module on onboard as well as expansion module.
The same module is working fine on Cisco 3750X-24T-L Switch As per the Hardware installation guide , SFP-GE-T transciever is supported on N5K platform. Please extend your support in configuring SFP-GE-T module on N5K platform? We tried with SFP-GE-S module on the same switch , and the same is found working fine.
Cisco Switching/Routing :: Can 10Gbase SFP+ Module Support 1GB Traffic On Nexus 5596T
Mar 20, 2013Can 10Gbase SFP+ module support 1GB traffic on a Nexus 5596T.
The module for 10Gb is Cisco SFP-10G-SR. My scenario is connecting the 10GB SFP+ module to an access switch 1GB fiber uplink, will this work?
Cisco Switching/Routing :: 3750-X Way To Get NetFlow Support Is To Install Specific Module
Sep 17, 2012I've been researching the 3750-x Netflow support but I'm not 100% sure of how much support it has. From what I've read the only way to get NetFlow support is to install a specific module that provides NetFlow. I also heard about how it might support s-flow but I haven't found out for sure.
View 8 Replies View RelatedCisco Switching/Routing :: X2 10GB SR10 Gig Module Will Support Fijutsu Primary Server
Jun 12, 2013We got a requirement for 2 number of X2-10GB-SR line card WS-X45-SUP6-E in WS-C4506-E.Customer want to connect with Fujitsu primary server . they have 10 gig module so i guess it will support with that.Also a doubt this X2-10GB-SR we can directly connect the firber sc multimode cable write no additional sfp required write .And for my knowledge if i use CVR-X2-SFP. I think to multimode sfp we have to insert write so do we get to 10 gig ports in one slot or how is it .
View 1 Replies View RelatedCisco Switching/Routing :: 6506E / Sup 720 And Sup 32 Together On The Same Switch?
Feb 20, 2012I'm installing a new 6506E switch and I want to use dual supervisor redundancy. I also have a spare sup 32 from another switch which i'm not using right now.I want to save some money. My question is Can I use one sup 720 as primary and the 2nd redundant sup 32 as a secondary on the same 6506E switch?
View 2 Replies View RelatedCisco Switching/Routing :: Power Requirement For 6506E
Jun 2, 2013I am looking the power requirement for 6506E in data sheet and it shows that is support 3000, 4000, 6000 & 8700W. I have currentely 4000W power source for my new 6506E switch. will it work with below modules in new 6506e ?
View 2 Replies View RelatedCisco Switching/Routing :: 6506E / Upgrading VSS IOS Procedure?
Apr 18, 2013I am upgrading a Cisco 6506E VSS from 12.2(33)SXI5 to 12.2(33)SXJ5 during a maintenance window. So I have plenty of time to reboot the VSS. Confirm below is the correct procedure. I have manually copied the new IOS to both active and standby Sup720s.
no boot system
boot system flash sup-bootdisk:NEW_IOS.bin
boot system flash sup-bootdisk:OLD_IOS.bin
!
copy run start
reload
I was going through the below cisco document and there are a few more steps as below: Is it necessary?
[URL]
Router(config)# no boot system
Cisco Switching/Routing :: 6506E - Switch Going To RMON After Reloading
Sep 29, 2012I have problem with my Cisco 6506E switch.when it reloads its going to RMON mode, If I give Boot command I. The RMON, then only it will get load with the iOS image.
View 2 Replies View RelatedCisco Switching/Routing :: PA-MC-2E1 / 120 Work With Catalyst Switch 6506E?
Dec 12, 2012Does the port adaptor PA-MC-2E1/120 work with the Catalyst Switch 6506E (Sup Engine: 720-3B)? We have bought a Enhanced FlexWAN card for this port adaptor.I read through the cisco website and seem to get confusing answers whether they are compatible.
View 1 Replies View RelatedCisco Switching/Routing :: 6506E - Sup720 BootVar Not Shown
Jun 4, 2013I'm trying to boot this IOS on a 6506-E, s72033-adventerprisek9_wan-mz.122-33.SXI8.bin.
This is what I see in bootvar.
sh bootvar
BOOT variable = disk0:s72033-adventerprisek9_wan-mz.122-33.SXI8.bin,1;disk0:s72033-ipservicesk9-mz.122-18.SXF8.bin,1;
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x2102
Standby not ready to show bootvar, I want to remove SXF8 and leave SXI8 alone. I removed both IOS file names in boot system and added the SXI8 again and saved. So this would be the output after.
But after a switch restart, this would be the output of show bootvar again.
sh bootvar
BOOT variable = disk0:s72033-adventerprisek9_wan-mz.122-33.SXI8.bin,1;disk0:s72033-ipservicesk9-mz.122-18.SXF8.bin,1;
CONFIG_FILE variable =
BOOTLDR variable =
Configuration register is 0x2102
Is there anything I need to check? This is an old engine and I'm not sure if the variables of the RP modified .
Cisco Switching/Routing :: 6506E SUP2T QOS Channel Consistency
May 21, 2012I have a catalyst 6506E (WS-C6506-E) with a SUP2T supervisor (VS-S2T-10G) card and a 10G interface card (WS-X6816-10G-2T) + DFC4.I have configured an etherchannel to another switch with the 2 10Giga ports of the SUP2T card and 2 10giga ports of the interface card.I only use the 10Giga ports of the SUP2T card so the cards have the same QOS transmit capabilities.But they do not have the same receive capabilities.
So when I configure QOS (with the new commands on SUP2T) on my 4 ports within the Etherchannel, 2 ports move down because of the inconsistency.
Till this point, no surprise.
The problem is that the command "no platform qos channel consistency" replacing the "no mls qos channel-consistency" does not exist.I run the last IOS 12.2(50)SY1 IPSERVICESK9.
And I cannot have QOS on my Etherchannel on the 2 cards.Or I have to use 4 ports of my interface card but in case of failure of this card, I loose the whole etherchannel.I there a way to avoid the consistency check ?
Cisco Switching/Routing :: 6506E Switch Command Meaning
Feb 5, 2012I see the command "vlan access-log ratelimit 2000" and wonder what it is that it does.
View 2 Replies View RelatedCisco Switching/Routing :: Etherchannel Suspended Between Catalyst 4948 And VSS 6506E
Dec 23, 2012I describe an issue when i need to performe an L2 or L3 Etherchannel from a Catalyst 4948 IOS Enterprise and 2 xCatalyst 6506E bandled with VSS.
From the VSS Side when i plug cables i see on the physicals and Etherchannel that Physical and protocole layer are up. On the 4948 side, I see that physical layer is up and protocol and Etherchannel interfaces are down.
On the Etherchannel port summary i see that the port state is supended.
On the first attempt, i have test with a L3 etherchannel on both side using no switchport with two IP addresses one at each side on etherchannel interfaces.
The etherchannel are bundled with LACP mode active and on the second attempt with PAGP mode ON.
The same configured on VSS 6506E work fine with Catalyst 3560E.
Cisco Switching/Routing :: 6506E / 3750E - Extending VLans Across Routed MAN Connection?
Feb 9, 2012We have 20+ VLANs on our main network, we have an offsite connected by metro GIG fiber ethernet. Right now, we have a layer 2 connection to there with the core at the main site as the gateway. We have had problems occationaly with the metro ethernet's spanning tree which then we would see our own network and cause an outage, not only for the offsite, but since the VLAN would see itself (not on our equipment but the metro ethernet carrier's) it would effect the main network as well.
What I was going to do to resolve this was change the connection to a routed network, however I need to still send some VLANs over the routed network (there are some applications that require to be on the same subnet as the server). Is there a way to Map the Vlan 10, and 11 at the main site to a vlan 10, and 11 at the remote site using a routed network? I noticed there is something about bridging, would I bridge the VLAN accross the routed MAN connection? Then would I bridge back the other way as well?
Main site has a 6506E
and offsite has a 3750E
Cisco Security :: Does ASA5540-bun-k9 Support CSC-20 Module
Dec 13, 2011One of my client want to upgrade its already installed ASA5540-bun-k9 by adding CSC-20 Module. As per below link CSC-20 is supported with ASA5540. but for any reason the ASA5540 bundle option with CSC Module is not available that create confusion.Will CSC-20 Module work with ASA5540-bun-k9 [URL]
View 2 Replies View RelatedCisco WAN :: 6509 - Catalysts Does Not Support Module
Jul 31, 2012we have two 6509 catalyst. we bought two new SFM-capable 16 port 1000mb GBIC/WS-X6516A-GBIC module. but our catalysts doesnt support them. we don't know the reason. we tried on another 6500 series catalyst they worked.
here are the outputs from our 6509:
Core-SW-1#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 0 1-subslot SPA Interface Processor-600 7600-SIP-600 JAE14090958
2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1413DX2B
3 16 CEF720 16 port 10GE WS-X6716-10GE SAL1414EL2Q
4 1 Application Control Engine Module ACE20-MOD-K9 SAD1408036Z
5 5 Supervisor Engine 720 10GE (Active) VS-S720-10G SAL1414ERDT
6 5 Supervisor Engine 720 10GE (RPR-Warm) VS-S720-10G SAL1414ERE3
7 16 CEF720 16 port 10GE WS-X6716-10GE SAL1414ER93
8 16 SFM-capable 16 port 1000mb GBIC WS-X6516A-GBIC SAL1326SVBS(code)
Cisco WAN :: Does 3745 1FE2W Module Support MPLS
Jan 16, 2011I have a couple of these routers in the lab with a very basic MPLS configuration on them. Everything works fine on the fixed interfaces but I cannot get the ldp neighborship to form between the 1FE2W interfaces on each router. Does this module support MPLS?
View 3 Replies View RelatedCisco VPN :: Sami Module On 7600 IPv6 Support
Apr 3, 2013Below is my Topo
DUT------router(7600)------Sami module (slot 9)
I have both ipv4 and Ipv6 config on all the three hops. Between Cisco and Sami module, I have the Ip config on vlan interface 1400(say). Its not on a physical interface obviously, I can ping ipv5 from DUT to Sami IPv4 address. But Ipv6 doesnt work. If I add a sttic route to DUT network on SAMI, show ipv6 route does not show it.
Cisco Switching/Routing :: 3900 - Add On Module
Jun 10, 2013i have a cisco router (3900 series) and a add on module (4 x 1 Gig port module). For some reason i cant seem to port channel them and cant do routing (can set an ip address on those ports). I can do port channel and routing on on-board ports. Do i have to enable any commands to do this ?
View 3 Replies View RelatedCisco Firewall :: ASA 5585X URL Filtering / Unable To Support CSC Module?
Aug 22, 2011Because ASA5585X doesn't support CSC module, how can do URL filtering on ASA5585X
View 1 Replies View RelatedCisco Application :: Does ACE Service Module Support SHA2(256) Certificates
Sep 1, 2010Does ACE service module support SHA2(256) certificates? I see that private key generation defaults to SHA1 and does not provide any option, also the cipher suites in SSL parameters map do not show SHA2 options. Can it handle SHA2 in any software release? I am currently running A2(2.3) build 3.00
View 6 Replies View RelatedCisco :: 1130AG Access Point Module Will Support Radius
Nov 4, 2012In our Environment we used to Connect to wifi using Radius Authentication Through AD Account (Encryption: TKIP and CIpher, Authentication Open+EAP and Network EAP, Key management WPA) this settings which will be done And pushed through AD Itself.We Use CIsco 1130AG, 1200 Series in most of the areas which have no Issues.But We Have Some trouble with Cisco WAP4410N Access point.In This Access point users were not able to Connect to wifi through Radius Authentication.However users were able to Connect to these Access point, but it is unsecured, whoever configure's the correct client settings in their PC. They can connect to SSID. This Access point is capable of supporting Radius Authentication?
View 4 Replies View RelatedCisco Switching/Routing :: N55 M16UP Module In Nx5548up
Jun 24, 2012Was wondering if anyone has ever hot ADDED, not swapped, an expansion module in a 5548up. Is a switch reboot required?I looked at the H/W install guide and it does not mention anything.
View 3 Replies View RelatedCisco Switching/Routing :: C6506 Module Cannot Be Detected
Dec 3, 2011My C6506 USING ws-sup720-3B, i upgrade the IOS to the latest release of 12.2(33) SXJ1 IOS version. After upgrade and reload the machine got one module cannot be detect..WS-X6416-GE-MT, 16 port 1000mb MTRK ethernet module. The version of this are:
-HW 1.0
-FW 5.3 (1)1
-SW 8.5 (0.46) RFW
Question 1: Any tools available on cisco to check out the hardware/software compabiity feature?
Question 2: Any release note, compability matrix table etc resources.
Cisco Switching/Routing :: Module N7K-M148GS-11 Was Frozen?
Sep 4, 2012Recently we ha a Nexus 7010 with a module frozen that was OIR (Online Remote and Insert) but do not work until reload the Nexus 7k.The command "show tech-support" has the following:
exception information --- exception instance 64 ----
Module Slot Number: 1
Device id : 147
Device Name: 0x93
Device Errorcode: 0x9329201
[code].....
Was is Excessive Interrupt Events? Can this "Minor Error" frozen the system?Is the port 42 on module 1 affected? o was 42 ports?
Cisco Switching/Routing :: Encryption Module For 3845
Jun 25, 2012Can the encryption module (DES/ 3DES/AES/SSL VPN Encrytion/compression) for Cisco Router 3845 able to support the external connection from other high end router, for example cisco 7200? What is the maximum bandwidth, load and concurrent connection it can support?
View 1 Replies View RelatedCisco Switching/Routing :: Put WS-X4712-SFP+E Module Into R-E Chassis?
Feb 3, 2013why is not possible to put a WS-X4712-SFP+E - module into an R-E chassis?The module has the same connection to backplane as the WS-X4748-UPOE+E and this one works in a R-E chassis.I know the restriction of Cisco that the 4712 is only supported in 4503-E, 4506-E,4507+E and 4510+E, but why?Are there hardware-restrictions, is the backplane different?
View 2 Replies View RelatedCisco Switching/Routing :: 6509-E / IOS Requirements For VSS And ACE Module?
Sep 10, 2012I have a pair of 6509-E Switches running VS-720 Supervisors. We are planning to add Ace Module onto the 6509-E. Will IP Base Image suffice the requirement? Will Ace Module work with only IP Base Image?
View 1 Replies View RelatedCisco Switching/Routing :: Hot Add - N55 M16UP Module In NX5548up?
Dec 16, 2012Hot ADDED, not swapped, an expansion module in a 5548up. Is a switch reboot required?
View 2 Replies View RelatedCisco Switching/Routing :: WS-X4606-X2-E Module Is Hot Swappable Or Not
Jan 6, 2013Do you have any document that states whether WS-X4606-X2-E module is hot swappable or not?
View 2 Replies View RelatedCisco Switching/Routing :: Install A C3KX-NM-10G Module
Feb 20, 2012confirm the C3KX-NM-10G module is hot-swappable.i have checked the cisco's website and it says " Although network modules are hot-swappable, we recommend installing a network module before powering the switch"
What steps i need to follow to install the module?