Cisco Switching/Routing :: How To Make Password Recovery For 7604

Jul 14, 2012

i read alot about password recovery , but when i apply it to cisco 7604 it fails ?i went to rommon mode and typed#  confreg 0x2142 then i typed reset when the router startup it request a password form me ,i can enter the user mode , and when i type sh ver command i note that the config resgitser is 0x2102 , not 0x2142 !!!!
 
i could enter the privilage mode !!!! and seems no thing  changed ! does this router has a specific password recovery procedure ? which differes than the classic procedure?

View 4 Replies


ADVERTISEMENT

Cisco WAN :: How To Make Password Recovery For 2900 Series

Feb 10, 2010

I need to do password recovery for a 2911 router. But ı can't find any documentation about it. I can be able to login at the first login, unfortunately ı logged out without changing the password. Now I can not log in and I can not open rommon with the ctrl+break key sequence.

View 6 Replies View Related

Cisco Switching/Routing :: Password Recovery On NME-16ES

Sep 17, 2012

I am trying to use the password recovery for an NME-16 and am having trouble.  I am unable to look at my files in dir to so I can rename them.  I can get the switch to bypass the config and come with the switch: prompt, but can not do anything more.  I am trying the password recovery guide, but cant get to the text file to rename.  I am using a 2811 router.

View 2 Replies View Related

Cisco Switching/Routing :: 3750 Password Recovery

Sep 24, 2012

I want to recover the password or set the cisco 3750 to the default password, as forget it

View 4 Replies View Related

Cisco Switching/Routing :: Password Recovery On 1900 Series ISR?

Jan 1, 2012

I can see the console on the router. (Using the USB console connected to a Macintosh.) I was configuring the router though this console connection, and I created a new user (priv level 15) and removed the default 'cisco' user. So I'm stuck at the username/password login prompt now.
 
I decided to do the password recovery procedure (via the cisco doc I found etc), but I cannot break into ROMMON during the boot process. I'm not sure if that's because my Mac isn't sending the break, or what.
 
The pw recovery doc says you can "remove flash" if you can't break into the boot sequence. However, I cannot find any instructions on how to remove the flash. I've opened the router, and I see one very small daughter card on the main board that I think is the flash, but I'm not about to start arbitrarly prying parts off.

View 6 Replies View Related

Cisco Switching/Routing :: Password Recovery For Switch 2960

Feb 19, 2013

 Currently Being Moderated password recovery

View 3 Replies View Related

Cisco Switching/Routing :: Router Password Recovery Procedure 877

Apr 7, 2012

i just wanna know if it's possible to perform a router password recovery using the reload command and then issue the break sequence instead of doing an off/on on the power switch. i often find in the docs to use the latter.also, is there a way to retain the startup-config on a router when we re-enable the password recovery functionality (no service password-recovery). i've just tried this on one of our 877 and when i hit the break sequence, it went back to factory default setting.

View 7 Replies View Related

Cisco Switching/Routing :: 3945 Router Password Recovery?

May 20, 2010

I understand that the password has to be changed the first time we login to Cisco 3945 router but i failed to do that and its not allowing me to connect using default username/password.

View 7 Replies View Related

Cisco Switching/Routing :: Password Recovery For 6509 Switch?

May 16, 2010

I have one CISCO 6509 Switch in my store. I tired to login in that switch but couldnt.. Once it's booted it's asking me: rd: . Find the attachment. I recover the password by changing confreg value but that also failed.

View 8 Replies View Related

Cisco Switching/Routing :: 2901 Router Password Recovery

Feb 18, 2013

I need to break into a 2901 router to recover the passwords.  Cisco's methodology for password recovery on 2900 seriews routerssays to remove the compact flash card and reboot into RMON.  There is no external compact flash card on a 2901.  Is there acompact flash card inside the box?  Or can you use the older method of rebooting and then hitting ctl+break to boot into RMON?

View 5 Replies View Related

Cisco Switching/Routing :: 2801 Password Recovery Disabled

Oct 5, 2011

I have a major problem with our core 2801 router. In summary it appears that a staff member disabled password recovery, deleted the IOS and rebooted.  Net result is no Rommon and no IOS on the flash.  I've read that the Conf-Reg will be reset if I remove the NVRAM but I cannot identify it on the board.  If I can get to Rommon I can recover.  Currently I don't have Flash reader to restore to flash.

View 2 Replies View Related

Cisco Switching/Routing :: Password Recovery On 3600 Router?

Dec 5, 2012

I'm using the ctrl-break sequence in hyperterminal during the the initial boot, and it's hanging.

View 1 Replies View Related

Cisco Switching/Routing :: Password Recovery For 4507 With Two Supervisor

Oct 31, 2011

I have catalys 4507 with TWO supervisor V.I flowed this procedure : url...
 
after the reset normaly i can change the password and i check the confreg is 0X2142 but it still ask to enter the possword  should i remove 1 supervisor and do the procedure or i must let the two spuervisor?

View 2 Replies View Related

Cisco Switching/Routing :: 6513 - Password Recovery With Dual Supervisors?

Sep 7, 2012

I have 2 x 6513 each with dual supervisor 720, and need to recover the enable password, is there a better method than removing  one supervisor, disabling redundancy and performing password recovery on the single active supervisor module , before re-inserting the second supervisor and re-enabling SSO/RPR on the still active module.

View 2 Replies View Related

Cisco Switching/Routing :: 3560 Password Recovery Enabled Procedures?

Dec 21, 2011

Following procedures get to the switch: dir flash and get the following.....unable to stat flash//: no such device

View 4 Replies View Related

Cisco Switching/Routing :: Catalyst 3560 G POE 48 Port Cannot Access Password Recovery

Nov 5, 2012

Im trying to access the switch to reset the password to factory defaults (please see switch output Astrix has removed customer identifying information for security purposes.) Each time I reboot the switch and try and access the password recover mode this same output below starts and im still not able to access the recovery area of the switch
 
cisco WS-C3560G-48PS (PowerPC405) processor (revision F0) with 122880K/8184K bytes of memory.
Processor board ID FOC1133Y28Q

[Code].....

View 3 Replies View Related

Cisco Switching/Routing :: C2960 Password-recovery Status Show Command

Feb 9, 2012

I enabled the "no service password-recovery" command on my C2960 switch. All seems to work as discribed. Only issue I have is --- which show command is used to reveal if the password-recovery feature is enabled of disabled as the command doesn't show up in the running config after you enable it ?

NOTE: The command does show up in the C2960 switch in config t mode (unlike the IOS router 2800 series), but doesn't show up in the running-config after you enable or disable it.
 
On the 2800 series routers (latest IOS) in config t mode the command does not show up but if you type "no service passowrd-recovery" the command function correctly and it does list it in the running configuration.

View 1 Replies View Related

Cisco WAN :: Recovery Password 2801 With No Service Of Recovery

May 1, 2012

i need to recover a router Cisco 2801. I lost the password and the "no service password-recovery" is configured. I have done many attempts with the procedure in this link  :URL

View 9 Replies View Related

Cisco Switching/Routing :: Policy Based Routing Not Done In Hardware With 7604-S

Mar 11, 2012

I am having a problem with PBR done on a 7604-S router - It seems like it is not done in harware. I have an Iperf client and an Iperf server, and would like to test the performance of 7600 router for PBR, supervisor is RSP720-3C-G and used interface card is 7600-ES20-GE3C ESM20G.

I have read  numerous discussions about PBR that is supposed to happen in hardware when you use it with matching access-list and set ip next-hop.Although, when I start the iperf, the 7600 cpu is hitting the 80-90 % boundary, and transfer bandwidth can't go over 120-130 Mbit/s.The IP Policy is applied on an interface part of vrf ONE maybe this is casing the problem... ?

The diagram and configuration follows:
Configuration:
 
c7604#sh run
boot system flash disk0:c7600rsp72043-advipservicesk9-mz.122-33.SRE2.bin
!
ip vrf one
[Code]...

View 8 Replies View Related

Cisco Switching/Routing :: HSRP Flapping On 7604?

Jul 9, 2012

i have 2 cisco 7604 distrubution routers .Both routers are running 310 hsrp groups.
 
Sundenly there is hsrp flapping which causes high CPU.
 
What is the limitation of HSRP group on cisco 7604 router .Below is the show ver from the router
 
----------------- show version ------------------
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICES-M), Version 12.2(33)SRC2, RELEASE SOFTWARE (fc2)

[Code]......

View 2 Replies View Related

Cisco Switching/Routing :: 7604 - 4 Orange Lights On Supervisor

Sep 2, 2012

I was called into a company today to look at their Cisco 7604 router as it had stopped working. The supervisor has all it LED in orange state, there was no blinking of the lights at power on they went straight to orange. Tried removing all cards, having only supervisor card in, etc but always the orange lights.

View 2 Replies View Related

Cisco WAN :: Resetting Password For 7604 Router?

Jul 30, 2012

I have tried to reset the password for 7604 but it is not working. At the rommon mode, i input 0x2142, and then reset.
 
It reloads and keeps asking for password.

View 7 Replies View Related

Cisco Switching/Routing :: 7604 - Cache Not Working / No Internet Access?

Dec 7, 2012

i have the topology :=========want to mention that im using port address translation on the router & not sure if it is making a conflict .

here is the config below :

why the cache is not working ?i mean that i tried going to internet with source ips of the subnet 10.20.30 , but i seems went to internet without any precedence of cahce server

[code]...

View 1 Replies View Related

Cisco Switching/Routing :: 7604 WS-X6724-SFP - Can Apply Service Policy To Dot1q Main Port

Jul 9, 2012

Example config

int g2/24
service-policy output test
 #and/OR 
int g2/24.10
encap dot1q 10
ip address 10.1.1.1 255.255.255.0
service-policy output test

View 5 Replies View Related

Cisco Switching/Routing :: 3750 Recovery BAUD Setting?

Jan 15, 2012

I had to format flash and recover. I did the quicker way by using set BAUD 115200...once the .bin was across I forgot to set the baud back to 9600. I have followed instructions: go back to switch: set BAUD 9600 then reset. also tried the unset command. problem is it always comes back up with a BAUD of 115200. CWill I have to label 1 switch as 115200?

View 38 Replies View Related

Cisco Switching/Routing :: 6500 With SUP720 Recovery From ROMmon

Jan 24, 2007

if it is possible to recover a Cat 6500 that has no code on bootflash from ROMMON, and is it mandatory to have a compact flash card to do the recovery ? or can one use xmodem or TFTP ?

View 6 Replies View Related

Cisco Switching/Routing :: Error Disabled Recovery 2960

Apr 1, 2012

i have enabled error disbled recovery with time interval of 600 seconds on my 2960 switch.
 
What exactly this command does? Pls explain

View 5 Replies View Related

Cisco Switching/Routing :: Catalyst 3750-E Software Recovery

Jan 31, 2012

I have the wrong code on the device. I can get to the switch: prompt. The manual say to connect a PC to the management port.  But it does not come up. x modem does not seem to work. I found some commands :

Examples : This example shows how to clear the Ethernet management port statistics: switch: mgmt_clr

View 1 Replies View Related

Cisco :: ACS 5.1 Password Recovery Procedure

Oct 20, 2011

where I can find a CLI password recovery procedure for the administrator account?

View 1 Replies View Related

Cisco Firewall :: PIX 501 Password Recovery

Nov 18, 2011

I have problem recovering my cisco 501 pix password. I followed instructions on this pageurl... but it seems its not working. I cant ping my TFTP Server on my pc. I tryed to disable firewall on my pc, i did a fresh install Windows but still i cant ping my TFTP Server on my PC.

View 8 Replies View Related

Cisco Firewall :: PIX 525 Password Recovery?

Dec 13, 2011

As I make a password recovery to a Cisco PIX 525 Version 6.3(3)?

View 1 Replies View Related

Cisco :: AIR-LOC2710-L-K9 Password Recovery?

Jun 1, 2011

I just bought one of these in and it was in production and I have no way of getting a hold of the login information. Is there a way to wipe these to factory defaults? I have been looking everywhere with no such luck.

View 2 Replies View Related

Cisco WAN :: Password Recovery For 3548 Xl?

May 6, 2011

I am a student pursuing a CCNA certification currently.  I recently came across a lot of 3548 xl switches.  They power up fine, post with out problem and load flash.  The problem I am running into is that the console is password protected.  I have found the password recovery procedure for this switch, but it requires the use of the mode button.  I have tried this process several times and the flash file is loaded with the startup config file.  How do I perform a password recovery on a switch with a broken mode button? 

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved