Cisco VPN :: Computers Are Connected To ASA5505 For Network
Feb 25, 2013
1) We have a server running active domain, and it also assign the IP address to domain users.
2) All the server, computers are connected to Cisco ASA5505 for the network.
Currently our VPNs were set up to use DHCP and local IP pools. It seems that I can get into the network, however the IP address the VPN gets was from the internal pool not From SERVER. As a result, the VPN is connected, by VPN is not able to ping to the router or the server. Is there anyway, I can configure the router treats VPN as the physical port. then the active domain server can assign the IP address to VPN.
View 0 Replies
ADVERTISEMENT
Mar 4, 2013
I have an ASA 5505 with ipsec VPN configured on it. I am able to connect to the ASA but I can't ping a connected network. I get a dhcp assigned address in the network I am trying to reach but can't access that network on Vlan5.
View 10 Replies
View Related
Oct 4, 2012
another computer is connected to my home network, and i want to remove them as i don't know who it is. I also notice my files have been very recently shared within the 'homegroup'. i have not personally done this.is someone accessing my computer?
View 3 Replies
View Related
Jan 29, 2011
i want to connect two computers to run the same program, they are conneted to a router and both have internet. i doing this for tax season and i want them to run the same program and have the same information on them.
View 5 Replies
View Related
Jun 27, 2011
Can I make them share a single HDD? Like for booting windows, loading games and stuff? All 6 computers to have ONE single HDD? Will save me tonnes of money if this is even possible?
View 8 Replies
View Related
Apr 13, 2011
Ive been having an issue for the past 3 weeks keeping my primary wired PC and the wireless PCs in my home network connected to the Internet. The internet constantly disconnects intermittently (with no rhyme or reason) and have tried everything I could do to try to resolve the issue. I connected my wired PC directly to the Optimum Online Cable Modem (Arris Telephony Modem v 3.0) I use to connect to the internet and it still has connection issues. Most of the time when it drops the connection, the network icon on the taskbar says I�m still connected to the internet. Only after a few minutes will the network icon finally appear with the yellow exclamation point over it. When I right click the network icon, I will check the network and sharing center and will click on the red x over the connection from my router to the internet. Sometimes when Windows checks for internet connection problems, it will state that it cant resolve the issue, and other times it will state that the DNS server isnt responding or cannot communicate with Primary DNS Server. I�ve had my ISP cable guys check my cable wire (coaxial cable wire) for packet loss, swapped my old router for anew one (twice), readjust the connection outside for a specific low node issue, and did 3 or 4 trace routes, conducted a multitude of ping tests, went on speedtest.com to check the signal strength and they state that everything looks great on their end. I also used different Ethernet ports built into the motherboard of my PC to see if my network adapter was the issue, but my internet connection it still continues to drop, even when only my pc is wired directly into the cable modem. I even changed the Ethernet cables themselves to see if they might have been faulty, but it still continues to drop.
I forgot to mention that I did the flushdns and registerdns commands , plus reset the TCP/IP, but my internet connection still continues to drop. The only thing(s) I have not done is change the network adapter completely (install a new Network PCI adapter ) and have the cable guy re install an entire new coaxial cable wire, of which myISP is adamant that I don�t need to have done since when I am able to connect to the internet, my signal strengths and speeds are great (download speeds of 32mbps and upload speeds of 5mbps). I know I�ve said a mouthful, but Im at a loss of what I should do next. When connected to my cable modem through my wireless N router, ALL of my PCs (my wired PC and my wirelessly connected PCs through my home network)will disconnect from the internet . Both the cable modem and the wireless N router still appear to be online (none of the lights on the front of the modem or router have changed ) I�ve even considered the strength of the ethernet cable itself, possibly thinking that the ones I have may not be strong enough for my internet speeds (purchased a CAT 6 Networking Ethernet Cable). My router , OS, cable modem, ISP, motherboard, and built in network adapter specs are shown below;
ISP: Optimum Online (with Boost Service) OS: Windows 7 Ultimate (with latest Windows 7 Service Pack 1 updates) Cable Modem : ARRIS Touchstone DOCSIS 3.0 E-MTA Telephony Modem TM802 Wireless Router: Netgear Rangemax Dual Band Wireless N Gigabit Router WNDR3700 Motherboard: ASUS Rampage Formula Built In Network Adapter: Dual Gigabit LAN (2 RJ45 Ports)
View 7 Replies
View Related
Jun 2, 2012
There are 3 people in my house that are connecting to the internet by a single modem router, everything is fine when there is only 1 of us online , but when there are 2 or 3 of us online , our download & our upload speed dramatically decreases . So is there a way to maintain our normal download & upload speed even when all 3 of us are online ?
View 10 Replies
View Related
Sep 22, 2011
When remote workers - working say from home connect into the company's LAN via an ASA5505, is it then possiable to then go back out to the internet using the ASA as the gateway to the internet.It works if I point towards an internal proxy server.
View 4 Replies
View Related
Jan 16, 2012
if you have two no of win 7 computer , and you run ping command at the same time at both PCs but the successfull at only one PC , second computer shows unsuccess full ping
View 2 Replies
View Related
Nov 30, 2012
how can we share files between computers that connected through switch,also how we can apply password,and share between only some computers?
View 3 Replies
View Related
Feb 15, 2012
Basically, my home network is comprised of a WRT54GS Router which the cable modem and my main computer are plugged into (as well as vonage, networked printer). That leaves one port open which is used to connect a Dlink DES-1105 10/100 switch. I am connecting it using a crossover cable, though that was not necessary.I just noticed that a computer connected to that switch gets MUCH less download speeds at speedtest.net, and it gets STUCK on the upload test (doesn't even start).I unplugged it and plugged it directly into the router for testing. I get 20-30 megs down (like I should), rather than 5-11 like the switch gave me (ONCE the switch gave me over 20, not sure why..)The upload test NEVER runs though. I've tried different computers as well. I tried setting the computer to "100 full duplex" manually and no luck.
View 3 Replies
View Related
Jul 1, 2011
I have multiple macs and when all of them are connected to the wag120n router, macs can't seem to find/see each other as if they are connected to different networks. I have tried another router ie. netgear dg834g router and this problem didn't occur and i am able to connect over the network without a problem. Obviously there is something wrong with the router settings.
View 2 Replies
View Related
Sep 12, 2011
Recently my connection went haywire , it constantly disconnect and spike when there is 2 computers connected to the rounter but it works fine with 1 computer.contacted the ISP , they sent someone down just to change the modem but the problem still occurs[CODE]
View 9 Replies
View Related
Oct 1, 2012
I need to change my password. There are other computers accessing my Wi-Fi. How do I disconnect them and block so only I can access my account.
View 1 Replies
View Related
May 8, 2011
My Dlink DIR-615 had worked flawlessly for almost 7 months now.But since last week it started showing problems.All the computers connected to LAN thru the switch could not access the Internet but the Server(192.168.0.100) which is connected to the DIR-615 could connect to the internet.the above screenshot was captured thru a laptop running Win7 Ultimate connected to the DIR-615 thru WiFi-n.Even after repeated Reloads the same error cropped up in the browsers in the computers connected thru the switch.The computers connected to the switch could access the Internet after I restarted the router.
View 7 Replies
View Related
Feb 10, 2011
I've got an RV042 router at home and am connected from my office via the QuickVPN client ver 1.4.1.1.2. I can ping the RV042 and log into the administration page and make changes. However, I can not see other computers on the remote network. I can not ping them. When I open my Network page, I still see the computers on my local network.
All machines are running Windows 7 Ultimate. ISP is Comcast at both locations. WAN IP's are dynamic, but have not changed in over a year. Local IP's on the remote (home) network are static..[url]....
View 1 Replies
View Related
May 6, 2013
In my customer having 3750 switch and they have simply assign IP address for vlan and enable telnet in switch and other things are same as default switch.In this switch they have connected 8 cisco layer 2 switches(6 managed and 2 unmanged switch) and approximately 5 servers connected in this switch.In a particular interval,users accessing File server are connected to 3750 switch become hanged for few min.This happen for some particular interval.users accessing this server becomes entirely hanged for few min,then i have configured port monitor cmd and i have installed one wildshark tool to host connected directly to that switch.
View 3 Replies
View Related
Dec 10, 2012
I have 3 laptops connecting wirelessly to this router. One is running at 18Mbps, the other two at 0.4Mbps. the internet setting are the same and the security is the same (WPA2-Personal with AES encryption). One of the slow computers is brand new and WAY faster than my "fast internet" computer. The other is about the same as the "fast internet" computer. I updated the I connected the new computer to the router tusing an ethernet cable and it had superfast internet. I redid the Cisco connect on each computer, but it didnt change anything. Why is it so slow wirelessly?
View 4 Replies
View Related
Jan 31, 2013
Everything in our small network worked until today when I had to manually reset the router. We run a application through a provider which requires that we view it from the same IP address for access. We have a statis IP assigned by our ISP solely for this purpose. For simplicity, lets us 23.11.23.176 as the statis assigned by our ISP and 23.11.23.175 as the gateway also assigned by our ISP. The application we need to browse requires that we use the 23.11.23.175 address else it is blocked from viewing. When we hard line into the modem, we are able to browse it fine. When I connect the CISCO router and do it wirelessly, it shows our address as 23.11.23.176 what are the required steps in order to set the CISCO router to use the Gateway address as the browsing IP for computers connected to it. We had set it up about a year ago, and i completely forgot how.
View 2 Replies
View Related
Jan 4, 2011
Why there is no parental control feature built in for WAP610N... how do i block website on all computers connected to my router?
View 4 Replies
View Related
Jun 28, 2012
i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
View 6 Replies
View Related
Jun 11, 2011
I have an XP machine that is unable to see any other computer on the network. I disabled the firewall and I can ping any device on the network with no issue. I have set several other computers to the same workgroup which is mshome. Lastly I have read several other post and tried the ideas there including this one...Finally, let's do the stack repair.TCP/IP stack repair options for use with Windows XP with SP2.
Start, ]R[/B]un, CMD to open a command prompt:
In the command prompt window that opens, type type the following commands:
Note: Type only the text in bold for the following commands.
Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log
Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog
Reboot the machine.That did not seem to work. As I am still in the same situation.
another note. This is the only XP on the network. Everyone else is Windows 7. Also on a side note, the reason I am doing this is to install a printer on this one and allow the other computers to print from it and seeing folders is good also.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Upstairs
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown[code].....
View 10 Replies
View Related
Oct 7, 2011
I have a wireless router which works just fine. I can connect my laptop as well as my iPad to it. I also have a hard wire connection that goes to my computer which works just fine. how can I get my computer to see the other computers in the network? They just don't show up even though I have shared enabled. There is only one router, so I thought it might be automatic, but it doesn't seem to be.
View 2 Replies
View Related
Aug 8, 2011
I have two identical computers on the same home network (and a couple of others too). My problem is the even though they are connected to the same wireless router and can each see the internet and the printer that online they cannot see each other. When I ping one from the other I get no response though they both receive responses from the router. I can't transfer files etc. It works a while ago but can't seem to get them connected again.
View 9 Replies
View Related
Nov 8, 2011
My router is cisco 881-w my server pc ip address is 10.10.10.3, but my wireless clients from 10.10.12.1 till 10.10.12.20, how can i see each other computers in windows network... I can ping computers, but i can't browse... I preffer to use cisco configuration proffesional v2.1, but also i'm learning CLI...
Short: I want to access my computers with \SK1 till \SK20
I can ping from wireless to wireless with names eg "ping SK20"
but i can't ping wireless to LAN eg "ping SERVER" but when i ping my server ip adress eg "ping 10.10.10.3" result is successfully
In my opinion i need some kind of bridge from LAN to WLAN
my Router Conf
Current configuration : 7126 bytes
!
version 12.4
no service pad
[Code].....
View 4 Replies
View Related
Aug 4, 2011
I have a vista, an xp, and a win7 computer networked. The xp is very temperamnetal, in that it randomly is accessible and just as randomly disappears. i often get the message "Computer (name) is not assessible...." The trouble is most acute in trying to access the xp machine from the win7.
View 4 Replies
View Related
Mar 29, 2011
Need the solution for aboove
View 19 Replies
View Related
Feb 26, 2012
I usually access my network computers by typing "\ipaddress" in run command. But sometimes this doesn't work so I have to type the computer name to access it. Similarly, sometimes i could not access with name but could access with ip.
View 7 Replies
View Related
Jan 25, 2011
I have a 2008 domain with win7 computers and winxp clients, i am able to see the win7 clients but not the winxp nor the servers in the network neighbourhood, ping works fineI can browse through a system on the network, but unable to have a broad view of the computers
View 1 Replies
View Related
Oct 10, 2012
how to connect 20 computers in a network[/u][/i][/b]
View 1 Replies
View Related
May 3, 2011
My home network was made up of a desktop running windows XP home (wired) and a desktop also running XP (wireless). I have recently added a desktop running Windows 7 (wireless) to the system. When I turn on the Windows 7 machine, it sees the other two machines and I use the files from them easily. But after the new machine has been on awhile, it does not see the other computers. (I can, however, still access the shared files on it (the Windows 7 machine) from the other desktop (haven't checked the laptop). If I power down the Windows 7 and then turn it back on, the other machines show up immediately. I've got them all named to the same workgroup and in the network settings in the control panel, I think that it is set to discover the network.
View 4 Replies
View Related
Jun 1, 2011
I have 2 computers connected in a LAN. I want to access the other computer through the main one.I do have shared folders (homegroup), but I would like to know how I can get complete access to the other computer via command prompt maybe?
View 4 Replies
View Related
Mar 8, 2011
How would I force lag to certain computer(s) on the network? Even better would be to only make certain processes lag. Would closing a port completely restricted traffic through it? How about limiting it? I have DD-WRT firmware installed on my Linksys router. This is my network that I pay for, so i am allowed to do it.I could possibly limit a port that online games would use specifically, or just set a low bandwidth cap for the IP the computer is on?
View 9 Replies
View Related
