How To Intentionally Cause Lag To Certain Computers On Network
Mar 8, 2011
How would I force lag to certain computer(s) on the network? Even better would be to only make certain processes lag. Would closing a port completely restricted traffic through it? How about limiting it? I have DD-WRT firmware installed on my Linksys router. This is my network that I pay for, so i am allowed to do it.I could possibly limit a port that online games would use specifically, or just set a low bandwidth cap for the IP the computer is on?
View 9 Replies
ADVERTISEMENT
Nov 11, 2012
I need to set up a small LAN intentionally NOT connected to the internet for some web testing.There will be three computers involved:
* A Web server running the LAMP environment (Linux, Apache, MySQL, and PHP. This is running.
* Windows 7 and MacBook (both are working computers) that are to reference the LAMP web server as though it was on the Internet.
Network hardware: have a TRENDnet TW100-S4w1ca 4-Port Broadband Router and a TRENDnet 5-port 10/100 Switch.How does one set up the IP addresses, or just let the TRENDnet Router handle it via DHCP? I was told the TRENDnet Router would do this. Is that something I need to configure for this to work?Then, how to access, from both the Windows 7 and Mac computers, web pages on the LAMP computer? Where and how is DNS needed with this?
View 7 Replies
View Related
Mar 1, 2012
I Like To Intentionally Create A Layer 2 Loop in My LabI have 2960 and 3750 switches and servers with multiple NIC's and also Some PC's and Hubs. Connections and Commands And Features Which Sould Be Disabled or Enabled)
View 4 Replies
View Related
Jun 28, 2012
i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
View 6 Replies
View Related
Jun 11, 2011
I have an XP machine that is unable to see any other computer on the network. I disabled the firewall and I can ping any device on the network with no issue. I have set several other computers to the same workgroup which is mshome. Lastly I have read several other post and tried the ideas there including this one...Finally, let's do the stack repair.TCP/IP stack repair options for use with Windows XP with SP2.
Start, ]R[/B]un, CMD to open a command prompt:
In the command prompt window that opens, type type the following commands:
Note: Type only the text in bold for the following commands.
Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log
Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog
Reboot the machine.That did not seem to work. As I am still in the same situation.
another note. This is the only XP on the network. Everyone else is Windows 7. Also on a side note, the reason I am doing this is to install a printer on this one and allow the other computers to print from it and seeing folders is good also.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Upstairs
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown[code].....
View 10 Replies
View Related
Oct 7, 2011
I have a wireless router which works just fine. I can connect my laptop as well as my iPad to it. I also have a hard wire connection that goes to my computer which works just fine. how can I get my computer to see the other computers in the network? They just don't show up even though I have shared enabled. There is only one router, so I thought it might be automatic, but it doesn't seem to be.
View 2 Replies
View Related
Aug 8, 2011
I have two identical computers on the same home network (and a couple of others too). My problem is the even though they are connected to the same wireless router and can each see the internet and the printer that online they cannot see each other. When I ping one from the other I get no response though they both receive responses from the router. I can't transfer files etc. It works a while ago but can't seem to get them connected again.
View 9 Replies
View Related
Aug 4, 2011
I have a vista, an xp, and a win7 computer networked. The xp is very temperamnetal, in that it randomly is accessible and just as randomly disappears. i often get the message "Computer (name) is not assessible...." The trouble is most acute in trying to access the xp machine from the win7.
View 4 Replies
View Related
Mar 29, 2011
Need the solution for aboove
View 19 Replies
View Related
Feb 26, 2012
I usually access my network computers by typing "\ipaddress" in run command. But sometimes this doesn't work so I have to type the computer name to access it. Similarly, sometimes i could not access with name but could access with ip.
View 7 Replies
View Related
Jan 25, 2011
I have a 2008 domain with win7 computers and winxp clients, i am able to see the win7 clients but not the winxp nor the servers in the network neighbourhood, ping works fineI can browse through a system on the network, but unable to have a broad view of the computers
View 1 Replies
View Related
Oct 10, 2012
how to connect 20 computers in a network[/u][/i][/b]
View 1 Replies
View Related
May 3, 2011
My home network was made up of a desktop running windows XP home (wired) and a desktop also running XP (wireless). I have recently added a desktop running Windows 7 (wireless) to the system. When I turn on the Windows 7 machine, it sees the other two machines and I use the files from them easily. But after the new machine has been on awhile, it does not see the other computers. (I can, however, still access the shared files on it (the Windows 7 machine) from the other desktop (haven't checked the laptop). If I power down the Windows 7 and then turn it back on, the other machines show up immediately. I've got them all named to the same workgroup and in the network settings in the control panel, I think that it is set to discover the network.
View 4 Replies
View Related
Jun 1, 2011
I have 2 computers connected in a LAN. I want to access the other computer through the main one.I do have shared folders (homegroup), but I would like to know how I can get complete access to the other computer via command prompt maybe?
View 4 Replies
View Related
Dec 16, 2012
I have vista and a lynksys but cannot find my key to get other computers on the network
View 6 Replies
View Related
Dec 5, 2012
I have a Windows 8 Pro laptop, and a new Windows 7 Laptop. When I try to setup the connection so that I can share files and folders between the two computers, I am asked for the User name and the password. I see the password in the homegroup, but entering it does nWhat is the user name in this case? My computer name or the other computer name or something else
View 1 Replies
View Related
Nov 15, 2011
How to connect 4 pc on network.
View 1 Replies
View Related
Oct 8, 2012
how to retrieve my computers network key?
View 1 Replies
View Related
Jul 12, 2012
How do I connect more than 10 computers on one server?
View 1 Replies
View Related
Sep 14, 2011
i have modem with an rj 45 hub. i now have a switch with four hubs when i connect for my two computers , only one of the computers could connect to the internet
View 2 Replies
View Related
Mar 18, 2011
I am able to go in only one direction between the two computers on my Network. The Acer Netbook computer can access the Toshiba Laptop, but the reverse is not possible. Both computers run Windows Vista Basic and Windows Firewall. I can ping the Acer from the Toshiba, but when I try to copy a file it says I do not have permission.
View 1 Replies
View Related
Apr 7, 2011
Computer A: Vista x64 Home - connected to router by LAN<br><br>
Computer B: Windows XP Home - connected to router wirelessly<br><br>
Both of these computers are connected to my router's network without problems. Computer B cannot access the internet through the network (but, neither has the multitude of other computers who connect to our network wirelessly)<br><br> Computer A can see Computer B in the Network Places, but attempting to access gives the error "network path not found".
Computer B can only see itself under Workgroup computers.<br><br>
I have enabled NETBios on both machines.<br>
Both machines are in the same Workgroup.<br>
Both machines have a shared folder on the desktop with permissions set to everyone.<br>
Both machines not only have firewalls disabled, but I have uninstalled them completely.<br>
[code]...
View 5 Replies
View Related
Mar 7, 2011
Am about to set up my new DIR-655. I noticed that the routers default IP is 192.168.0.1 The router it replaces used 192.168.1.1Since I have several devises on the network with fixed IPs 192.168.1.x (printer and Stora) and since I do not want to change them, can I leave them as is?Also, last time I changed the IPs that the router hands out, many computer could no longer see each other on the network, due to firewall issues. So, can I set the router to use a range like 192.168.1.xx even though the routers address is not changed? orshould I just change the router IP to 192.168.1.1 and change the range. Also do I need to change the mask if I do any of this?
View 3 Replies
View Related
Oct 18, 2012
I seem to have a problem with my new PC build... it's getting connected to the internet, but it isn't finding the network everything else is using, which has left me more than a bit confused. It seems as though my new PC is on a network all its own (simply called "Network"). Meanwhile, my old machine and my housemate's machine (both running Win7 x64), as well as my Playstation 3, are all connected to the main network, which we named "Ostia."
The router is a Netgear WNR2000v2. It's wireless (though all three desktops and the PS3 are all wired), and we've had no problems connecting anything in the past. This is the only machine that can't get access. I've had friends come over with laptops to play games on several occasions and they've always been able to wirelessly connect to my network, or plug in a wired connection and find it as well. But my new PC doesn't see "Ostia." I can go to Control Panel Network and Internet Network and Sharing Center and click "see full map," and that shows me the full network (Internet, the router, and everything connected to said router). But for whatever reason, I can't seem to get my new machine into the Ostia network.
I've had zero problems with the internet on my new machine otherwise. It connects fine in IE9, Firefox, and Chrome. In Battlefield 3 and other online games, this machine is an absolute terminator, running every game I throw at it on max settings without dropping below 60-70 FPS with no lag of any sort. The only reason this is annoying is because I can't move shared files to and from this machine with the other two PCs.
View 1 Replies
View Related
Sep 3, 2012
How do I fix my network so that my Windows 7 and XP computers automatically detect each other on the network. Right now, they cannot browse each other by computer name, instead I have to type their IP addresses (for example: \192.168.2.5) in the windows explorer address bar, and then I can browse to their shared folders. And under "Network" (in Windows Explorer) each computer only displays itself, and not the other (unless I have already typed in the other's IP address, in which case it displays the other computer as the IP address).
View 3 Replies
View Related
Dec 5, 2011
how do i assign IP addresses to 10 computers in a network?
View 3 Replies
View Related
Jul 25, 2012
Can an IP conflict cause network issues for computers other than the devices that have the same IP? I have resolved an issue where someone was testing a device on our network and assigned a static IP that was already in use by one of our printers. Specifically, I am curious if the IP conflict could have caused issues with mapped network drives for other computers. I just seemed to have network gremlins for the 2 days of the IP conflict.
View 2 Replies
View Related
Dec 6, 2012
My Macbook Pro connects and mom's Windows 7 laptop connects, and (though having done it manually) and my iPhone connects as well. But my Windows 7 desktop and my dad's Windows 7 laptop don't detect the network.
View 3 Replies
View Related
Jun 23, 2012
I have several computers wirelessly connected through a "LevelOne" access pont. I connected network Peripherals as follows.(router/switch/access point/PC-01 or PC-02)one access point connected with 4 PCs with one usb printer.this printer connected with one pc.4 pcs are in same home group.They were worked well before, but now the computers cannot ping each other.Many time clint pc can't connect to server pc (Printer attached pc).rinter shows offline.advanced sharing settings are normal as microsoft. Firewall disabled.
View 3 Replies
View Related
Oct 29, 2011
i want to enquire how we can setup a network with 100 computer along with router, firewall, print server, file server. diagram of network to understand the things.
View 1 Replies
View Related
Sep 10, 2011
whether it's possible to access information relating to 1 computer, from another machine that has previously connected to the same wifi network?For the first time I've connected my work computer to my home wireless network to work from home. When I return my computer to work, will they be able to see everything I've done on that home network using my personal laptop arous that time? My wifi network has WPA2 and has a password. I imagine the work computer would need some kind of logging software, how can I tell this?
View 5 Replies
View Related
Mar 4, 2012
At my work when I click on Network it immediately shows a full list of all the computers on the network. There's probably about 100. At home when I click network it takes like 30 seconds to do some scan and show like 3 computers. What's the deal?
View 3 Replies
View Related
Jul 29, 2011
I have a small network setup with 3 (1 XP and 2 Win7) laptops and one desktop (Win 7). All machines can see shared files/folders with each other. Everything was working fine. Suddenly, yesterday, the XP laptop stopped seeing all the Win 7 machines and the win7 machines stopped seeing the XP laptop. I have no problem pinging each PC and pinging the gateway on the XP and Win7 machines., but they can't see each other. What can I do?
View 6 Replies
View Related
